Nickel‐catalyzed aminocarbonylation of aryl halides with carbamoylsilanes: efficient synthesis of secondary (primary) aromatic amides

A nickel‐catalyzed aminocarbonylation of aryl halides using carbamoylsilane as an amide source leading to corresponding secondary or primary aromatic amides has been developed, in which the methoxymethyl and benzyl were used as amino protecting group. The protocol tolerates a broad range of aryl halides bearing different functional groups to afford good yields of aryl amides under mild reaction conditions. The types and the relative positions of substituents on the aryl ring make a notable impact on the coupling efficiency. The plausible mechanism of nickel‐catalyzed aminocarbonylation has been suggested.     

Palladium-catalyzed carbonylative synthesis of N-cyanobenzamides from aryl iodides/bromides and cyanamide

A novel and convenient protocol for the synthesis of N-cyanobenzamides starting from readily available aryl halides and cyanamide via palladium-catalyzed aminocarbonylation has been developed. The protocol utilizes Mo(CO)₆ as the CO source or CO(gas) and affords the desired N-cyanobenzamides in moderate to good yields.     

Cobalt-catalyzed aminocarbonylation of (hetero)aryl halides promoted by visible light

The catalytic aminocarbonylation of (hetero)aryl halides is widely applied in the synthesis of amides but relies heavily on the use of precious metal catalysis. Herein, we report an aminocarbonylation of (hetero)aryl halides using a simple cobalt catalyst under visible light irradiation. The reaction extends to the use of (hetero)aryl chlorides and is successful with a broad range of amine nucleophiles. Mechanistic investigations are consistent with a reaction proceeding via intermolecular charge transfer involving a donor–acceptor complex of the substrate and cobaltate catalyst.

An aminocarbonylation of (hetero)aryl halides using a simple cobalt catalyst under visible light irradiation is presented.     

SelectiveN(1)-arylation of benzotriazole with activated aryl halides under conditions of phase transfer catalysis

Arylation of 1H-1,2,3-benzotriazole, with activated aryl halides in a medium of aromatic hydrocarbons under conditions of phase transfer catalysis with the use of inorganic bases and cetyltrimethylammonium bromide as a phase-transfer catalyst was studied. Arylation affords bothN(1)- andN(2)-arylation products. Their ratio depends on the nature of the base and the reactivity of the arylating agent. In the presence of catalytic amounts of copper phenylcyclopropanecarboxylate, arylation proceeds regioselectively at the N(1) atom. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1553–1556, August, 1999.     

Expanded scope of heterocyclic biaryl synthesis via a palladium-catalysed thermal decarboxylative cross-coupling reaction

The palladium-catalysed decarboxylative cross-coupling of heterocyclic aromatic carboxylates and aryl halides is described. The cross-coupling proceeds under relatively mild conditions using catalytic Pd(0) and tetrabutylammonium bromide (TBAB). Utilizing a mixed solvent system consisting of N,N-dimethylformamide (DMF) and N-methyl-2-pyrrolidone (NMP), the cross-coupling system operated at temperatures ranging from 80 to 140 °C.     

Palladium complex containing two sterically hindered ligands as highly efficient catalyst for Suzuki–Miyaura reaction

A new palladium(II) complex containing two sterically hindered ligands, a P,P‐bonded diphosphine and N,N‐bonded Schiff base, within the same coordination sphere has been synthesized and investigated as a catalyst for the Suzuki–Miyaura cross‐coupling reactions of aryl halides with arylboronic acids. The reaction was highly efficient with aryl bromides in water at room temperature and aryl chlorides in dimethylformamide under relatively mild conditions. Excellent yields of coupling products were obtained for a wide range of aryl halides including heteroaryl halides with a low loading of catalyst. Copyright © 2015 John Wiley & Sons, Ltd.     

Palladium bis(2,2,6,6‐tetramethyl‐3,5‐heptanedionate) catalyzed alkoxycarbonylation and aminocarbonylation reactions

Palladium bis(2,2,6,6‐tetramethyl‐3,5‐heptanedionate), a structurally well defined O‐containing transition metal complex, is reported to be an efficient catalyst for alkoxycarbonylation and aminocarbonylation reactions under milder operating conditions. The system tolerated the carbonylative coupling of various aryl halides with phenol/alcohol and amines, providing good to excellent yields of desired products under optimized reaction conditions. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of aryl acetamides by aminocarbonylation of benzylic chlorides using carbamoylsilane as an amide source

Using N-methyl-N-(1-phenyl)ethylcarbamoyl(trimethyl)silane as an amide source, the direct transformation of benzylic chlorides into the corresponding aryl acetamides through palladium-catalyzed aminocarbonylation is described. The electronic property and the relative position of substituents on the aromatic ring impact the coupling efficiency.     

An efficient copper(I) complex catalyzed Sonogashira type cross-coupling of aryl halides with terminal alkynes

A wide range of arylated alkynes are synthesized from the corresponding aryl halides and terminal alkynes through Sonogashira type cross-coupling reactions through C(aryl)-C bond formation in the presence of a catalytic amount of N,N′-dibenzyl BINAM-CuI complex under mild reaction conditions.     

Mild and efficient Pd(PtBu3)2‐catalyzed aminocarbonylation of aryl halides to aryl amides with high selectivity

This work describes a mild and efficient approach for the synthesis of aryl amides via catalytic aminocarbonylation of aryl halides with alicyclic amines using a Pd(P^t Bu₃)₂/NH₄Cl catalyst system. Under mild reaction temperature of 60°C and balloon pressure of CO, 5 mol% Pd(P^t Bu₃)₂ with a cheap NH₄Cl promoter is sufficient for high yields of aryl amides. The influence of reaction parameters such as reaction temperature, ligand type and promoter on catalytic activity was investigated. This work also discusses the catalytic intermediates in detail, and provides a plausible mechanism based on an acid chloride intermediate.     

A Unified Strategy for Arylsulfur(VI) Fluorides from Aryl Halides: Access to Ar-SOF3 Compounds

A convenient protocol to selectively access various arylsulfur(VI) fluorides from commercially available aryl halides in a divergent fashion is presented. Firstly, a novel sulfenylation reaction with the electrophilic N-(chlorothio)phthalimide (Cl-S-Phth) and arylzinc reagents afforded the corresponding Ar-S-Phth compounds. Subsequently, the S(II) atom was selectively oxidized to distinct fluorinated sulfur(VI) compounds under mild conditions. Slight modifications on the oxidation protocol permit the chemoselective installation of 1, 3, or 4 fluorine atoms at the S(VI) center, affording the corresponding Ar-SO₂F, Ar-SOF₃, and Ar-SF₄Cl. Of notice, this strategy enables the effective introduction of the rare and underexplored -SOF₃ moiety into various (hetero)aryl groups. Reactivity studies demonstrate that such elusive Ar-SOF₃ can be utilized as a linchpin for the synthesis of highly coveted aryl sulfonimidoyl fluorides (Ar-SO(NR)F).     

Copper-catalyzed coupling of aryl halides and nitrite salts: a mild Ullmann-type synthesis of aromatic nitro compounds

Nitration of aromatic halides proceeded smoothly in the presence of catalytic amounts of Cu bronze and N,N′-dimethylethylenediamine. Sodium nitrite-18-crown-6, or tetra-n-butylammonium nitrite (n-Bu₄NNO₂) turned out to be efficient nitrating agents. The aromatic nitro compounds were synthesized under essentially neutral conditions.     

N-Arylation of aliphatic, aromatic and heteroaromatic amines catalyzed by copper bis(2,2,6,6-tetramethyl-3,5-heptanedionate)

Copper bis(2,2,6,6-tetramethyl-3,5-heptanedionate) was found to be an efficient catalyst for N-arylation of aliphatic, aromatic and heteroaromatic amines with aryl iodides/bromides under mild conditions. The system tolerated a variety of hindered and functionalized amines/aryl halides and the desired N-aryl amines were obtained in good to excellent yields.     

A comparative Suzuki reaction of aryl halides using a new dimeric orthopalladated complex under conventional and microwave irradiation conditions

The cross‐coupling reaction between phenylboronic acid and various types of aryl halides (Suzuki reaction) was carried out using a catalytic amount of a new phosphine‐based catalyst under microwave irradiation. The reaction conditions were optimized and results showed that, by application of this catalytic system, N‐methyl‐2‐pyrrolidone as the solvent and potassium carbonate as the base, reactions could be completed in a short reaction time with high to excellent yields. Copyright © 2012 John Wiley & Sons, Ltd.     

Microwave-assisted, Mo(CO)6-mediated, palladium-catalyzed amino-carbonylation of aryl halides using allylamine: from exploration to scale-up

Palladium-catalyzed aminocarbonylations of various (hetero)aryl halides with allylamine using Mo(CO)₆ as a solid, in situ CO source, were explored. Microwave-enhanced conditions proved to be highly useful in promoting the conversions in a mere 10-20 min with various (hetero)aryl iodides, bromides and chlorides. The scale-up of a microwave-enhanced aminocarbonylation to 25 mmol scale was performed successfully.     

Copper(I) 3-Methylsalicylate Mediates the Chan–Lam N-Arylation of Heterocycles

Copper(I) 3-methylsalicylate (CuMeSal) mediates N-arylation reactions between aryl boronic acids and aromatic heterocycles (Chan–Lam coupling) under moderate reaction conditions (K₂CO₃, methanol, 65 °C, in air, 3–5 h). Both electron-rich and electron-deficient aryl boronic acids and a diverse set of N-heterocycles were allowed to react and gave N-arylation products in reasonable yields, which demonstrate the utility of this catalyst.     

Synthesis of N-aryl-d-glucosamines through copper-catalyzed C–N coupling

A catalytic protocol was developed to synthesize N-aryl-d-glucosamines from the corresponding aryl halides. Cross-coupling of 1,3,4,6-tetra-O-benzyl-β-d-glucosamine with aryl iodides or bromides was catalyzed with copper. Subsequent deprotection of the benzyl group gave the arylation product N-aryl-d-glucosamines.     

Direct N−H Activation to Generate Nitrogen Radical for Arylamine Synthesis via Quantum Dots Photocatalysis

Represented herein is the first example of N-radical generation direct from N−H bond activation under mild and redox-neutral conditions. The in situ generated N-radical intercepts a reduced heteroarylnitrile/aryl halide for C−N bond formation under visible-light irradiation of quantum dots (QDs). A series of aryl and alkylamines with heteroarylnitriles/aryl halides exhibit high efficiency, site-selectivity and good functional-group tolerance. Moreover, consecutive C−C and C−N bond formation using benzylamines as substrates is also achieved, producing N-aryl-1,2-diamines with H₂ evolution. The redox-neutral conditions, broad substrate scope, and efficiency of N-radical formation are advantageous for organic synthesis.     

Nickel-Catalyzed Amination of (Hetero)aryl Halides Facilitated by a Catalytic Pyridinium Additive

An efficient and operationally simple Ni-catalyzed amination protocol has been developed. This methodology features a simple Ni^II salt, an organic base and catalytic amounts of both a pyridinium additive and Zn metal. A diverse number of (hetero)aryl halides were coupled successfully with primary and secondary alkyl amines, and anilines in good to excellent yields. Similarly, benzophenone imine gave the corresponding N-arylation product in an excellent yield.     

Aniline‐Promoted Cyclization–Replacement Cascade Reactions of 2‐Hydroxycinnamaldehydes with Various Carbonic Nucleophiles through In Situ Formed N,O‐Acetals

In this study, we report the harnessing of new reactivity of N,O‐acetals in an aminocatalytic fashion for organic synthesis. Unlike widely used strategies requiring the use of acids and/or elevated temperatures, direct replacement of the amine component of the N,O‐acetals by carbon‐centered nucleophiles for C?C bond formation is realized under mild reaction conditions. Furthermore, without necessary preformation of the N,O‐acetals, an amine‐catalyzed in situ formation of N,O‐acetals is developed. Coupling both reactions into a one‐pot operation enables the achievement of a catalytic process. We demonstrate the employment of simple anilines as promoters for the cyclization–substitution cascade reactions of trans‐2‐hydroxycinnamaldehydes with various carbonic nucleophiles including indoles, pyrroles, naphthols, phenols, and silyl enol ethers. The process offers an alternative approach to structurally diverse, “privileged” 2‐substituted 2H‐chromenes. The synthetic power of the new process is furthermore shown by its application in a 2‐step synthesis of the natural product candenatenin E and for the facile installation of 2‐substituted 2H‐chromene moieties into biologically active indoles.