铜转运蛋白C端金属结合域与Ag+及Hg2+的相互作用

铜转运蛋白(CTR1)不仅参与铜的细胞摄取,而且在其它重金属离子的摄取过程中也发挥重要作用. 本文采用紫外-可见(UV-Vis)光谱,核磁共振(NMR)和质谱(MS)的方法,研究了人源CTR1 (hCTR1)的C端金属结合域(C8)与Ag⁺和Hg²⁺的相互作用. 研究表明,Ag⁺和Hg²⁺都能与C8结合,但二者与C8的结合机制明显不同. 每个C8分子可以结合两个Ag⁺离子,但一个Hg²⁺却可以与两个C8形成桥联. 此外,Ag⁺离子与C8的配位是一个中等速度的交换过程,而Hg²⁺离子则为快速交换过程. C8的半胱氨酸残基是两种离子的重要结合位点,同时组氨酸残基也参与两种金属离子的配位,其中Ag⁺优先结合组氨酸,而Hg²⁺则对半胱氨酸的结合具有显著的优势. 虽然HCH基序对C8 与金属配位至关重要,一些远端的其它氨基酸也可以参与C8 与银离子的配位,这可能与CTR1 在摄取Ag⁺过程中的金属转移机制相关. 这些结果为理解hCTR1 蛋白摄取重金属离子的作用机制提供了必要的信息.     

Modified Capillary Electrophoresis for Highly Sensitive and Selective Detection of Hg2+ in Natural Water

A novel capillary with high sensitivity and selectivity for mercury ion detection based on modified nanosize silica has been designed and synthesized. The obtained modified capillary was applied to separate and determine mercury ion by capillary electrophoresis with a laser‐induced fluorescence detector. The optimal experimental conditions were determined by evaluating various controlling factors: running buffer hexamine‐HCl 15 mmol L^?1, pH=5.2, separation voltage 30 kV and temperature 25 °C. The modified capillary exhibited excellent sensitivity and selectivity for Hg2+ over other coexisting metal ions (K⁺, Ag⁺, Ca2⁺, Mg²⁺, Ba²⁺, Ni²⁺, Cd²⁺, Pb²⁺ and Zn²⁺ increased to 10000 times of Hg²⁺, Cu²⁺ increased to 5000 times) in aqueous solution, and was successfully applied to the determination of Hg²⁺ in natural water samples and displayed satisfactory results.     

Quantitative Trennung von Schwermetallen mit Chelataustauschern auf der Basis von Polystyrol

Zusammenfassung Die Trennung und Isolierung von folgenden Schwermetallen bei einem hohen Überschuß an Fremdionen mit Hilfe neuer selektiver Chelataustauscher wird beschrieben: Cu²⁺/Zn²⁺, Cu²⁺/Pb²⁺, Ag⁺/Cu²⁺, Ag⁺/Pb²⁺, Hg²⁺/Zn²⁺, Hg²⁺/Cd²⁺; Abtrennung von Hg²⁺. Unter gleichen Bedingungen war mit dem handelsüblichen Austauscher Dowex A-1 keine Trennung möglich.

---

Quantitative separation of heavy metals by means of chelating exchangers based on polystyrol

Summary The separation and isolation of the following heavy metals in presence of a high excess of foreign ions by means of new selective chelating exchangers is described: Cu²⁺/Zn²⁺, Cu²⁺/Pb²⁺, Ag⁺/Cu²⁺, Ag⁺/Pb²⁺, Hg²⁺/Zn²⁺, Hg²⁺/Cd²⁺; separation of Hg²⁺. Under the same conditions no separation could be achieved by the ion-exchanger Dowex A-1.

     

Ag+与Hg2+对G-四链体DNA结构的破坏及其对构筑DNA逻辑门的应用

本工作利用圆二色光谱研究了Ag⁺与Hg²⁺对4种代表性G-四链体DNA结构的破坏作用。结果表明Ag⁺可能通过与碱基G螯合从而破坏G-四链体结构;Hg²⁺能通过形成T-Hg²⁺-T碱基对,及其他方式破坏G-四链体结构。含巯基(-SH)的半胱氨酸与Ag⁺与Hg²⁺可以发生较强的配位作用,从而使被Ag⁺与Hg²⁺破坏后的G-四链体DNA结构得以回复。基于此,一个新颖的Ag⁺/Hg²⁺-半胱氨酸-DNA逻辑门得以构筑。     

Mo3S132− Intercalated Layered Double Hydroxide: Highly Selective Removal of Heavy Metals and Simultaneous Reduction of Ag+ Ions to Metallic Ag0 Ribbons

We demonstrate a new material by intercalating Mo₃S₁₃^2? into Mg/Al layered double hydroxide (abbr. Mo₃S₁₃-LDH), exhibiting excellent capture capability for toxic Hg²⁺ and noble metal silver (Ag). The as-prepared Mo₃S₁₃-LDH displays ultra-high selectivity of Ag⁺, Hg²⁺ and Cu²⁺ in the presence of various competitive ions, with the order of Ag⁺>Hg²⁺>Cu²⁺>Pb²⁺≥Co²⁺, Ni²⁺, Zn²⁺, Cd²⁺. For Ag⁺ and Hg²⁺, extremely fast adsorption rates (≈90 % within 10 min, >99 % in 1 h) are observed. Much high selectivity is present for Ag⁺ and Cu²⁺, especially for trace amounts of Ag⁺ (≈1 ppm), achieving a large separation factor (SF_Ag/Cu) of ≈8000 at the large Cu/Ag ratio of 520. The overwhelming adsorption capacities for Ag⁺ (q_m^Ag=1073 mg g^?1) and Hg²⁺ (q_m^Hg=594 mg g^?1) place the Mo₃S₁₃-LDH at the top of performing sorbent materials. Most importantly, Mo₃S₁₃-LDH captures Ag⁺ via two paths: a) formation of Ag₂S due to Ag-S complexation and precipitation, and b) reduction of Ag⁺ to metallic silver (Ag⁰). The Mo₃S₁₃-LDH is a promising material to extract low-grade silver from copper-rich minerals and trap highly toxic Hg²⁺ from polluted water.     

High Sensibility of Quantum Dots to Metal Ions Inspired by Hydroxyapatite Microbeads

An approach for the sensitive and selective determination of Ag⁺, Cu²⁺ and Hg²⁺ ions was developed based on the fluorescence quenching of mercaptopropionic acid (MPA) capped CdTe quantum dots in the existence of hydroxyapatite (HAP) nanoribbon spherulites. Among various metal ions investigated, it was found that the fluorescence of CdTe QDs was only sensitive to Ag⁺, Cu²⁺ and Hg²⁺ ions. The addition of HAP into the CdTe system could bring forward a sensitivity improvement of about 1 to 2 orders of magnitude in the detection of Ag⁺ and Cu²⁺ compared with the plain CdTe system without the existence of HAP; while there was no sensitization effect for Hg²⁺. Under optimal conditions, the detection limits for Ag⁺, Cu²⁺ and Hg²⁺ were 20, 56 and 3.0 nmol·L^?1, respectively, and the linear ranges were 0.02–50, 0.056–54 and 0.003–2.4 µmol·L^?1, respectively. Mechanisms of both QDs fluorescence quenching by metal ions and the sensitization effect by HAP were also discussed.     

Dulplex analysis of mercury and silver ions using a label-free fluorescent aptasensor

Label-free Hg²⁺ aptamer was used as a sensing element and the PicoGreen dye was specific to ultra-sensitive double-stranded DNA (dsDNA), which achieved novel fluorescence assay for detection of both mercury and silver ions. In this aptasensor, Hg²⁺ bound to thymidine (T) to form T–Hg^2+-T base pairs and Ag⁺ specifically interacted with C–C mismatches to produce C–Ag⁺–C base pairs. The conformation changes prevented the aptamer from binding to its complementary sequences to form dsDNA and caused a fluorescence intensity decrease with PicoGreen. The change in the fluorescence intensity made it possible to detect both Hg²⁺ and Ag⁺ in a dose-dependent manner. The sensing system could detect as low as 5 × 10^–8 mol/L of Hg²⁺ and 9.3 × 10^–10 mol/L of Ag⁺. The fluorescent intensity changes in the system were specific for Hg²⁺ and Ag⁺, making this simple and cost-effective method extremely valuable in its future applications in monitoring Hg²⁺ and Ag⁺ pollution in environmental analysis.     

Cytidine-stabilized gold nanocluster as a fluorescence turn-on and turn-off probe for dual functional detection of Ag and Hg

In this study, we have developed a label-free, dual functional detection strategy for highly selective and sensitive determination of aqueous Ag⁺ and Hg²⁺ by using cytidine stabilized Au NCs and AuAg NCs as fluorescent turn-on and turn off probes, respectively. The Au NCs and AuAg NCs showed a remarkably rapid response and high selectivity for Ag⁺ and Hg²⁺ over other metal ions, and relevant detection limit of Ag⁺ and Hg²⁺ is ca. 10 nM and 30 nM, respectively. Importantly, the fluorescence enhanced Au NCs by doping Ag⁺ can be conveniently reusable for the detection of Hg²⁺ based on the corresponding fluorescence quenching. The sensing mechanism was based on the high-affinity metallophilic Hg²⁺–Ag⁺ interaction, which effectively quenched the fluorescence of AuAg NCs. Furthermore, these fluorescent nanoprobes could be readily applied to Ag⁺ and Hg²⁺ detection in environmental water samples, indicating their possibility to be utilized as a convenient, dual functional, rapid response, and label-free fluorescence sensor for related environmental and health monitoring.     

Highly Effective Fluorescent Sensor for Hg2+ in Aqueous Solution

A new anthracene fluorophore senses Hg²⁺ selectively in aqueous solution. Among the metal ions examined, fluorescent chemosensor 1 shows selective large CHEQ effects with Hg²⁺ and Ag⁺ at pH 7.     

Sensitive electrochemical DNA-based biosensors for the determination of Ag<Superscript>+</Superscript> and Hg<Superscript>2+</Superscript> ions and their application in analysis of amalgam filling

In the present paper, we used single-stranded poly-T (100% thymine bases) and poly-C (100% cytosine bases) nucleic acids as DNA probes for selective and sensitive individual electrochemical determination of Hg²⁺ and Ag⁺_, respectively, on the multi-walled carbon nanotube paste electrodes (MWCNTPEs) using [Fe(CN)₆]^3?/4? as electroactive labels. In the presence of Hg²⁺ and Ag⁺, the probe–Hg²⁺/Ag⁺ interactions through T–Hg²⁺–T and C–Ag⁺–C complexes formation could cause the formation of a unimolecular hybridized probe. This structure of probe led to its partial depletion from electrode surface and facilitation of electron transfer between [Fe(CN)₆]^3?/4? redox couple and electrode surface, resulting in the enhanced differential pulse voltammetry (DPV) oxidation current of [Fe(CN)₆]^3?/4? at the probe-modified electrode surface. We applied the difference in the oxidation peak currents of [Fe(CN)₆]^3?/4? before and after Hg²⁺/Ag⁺–DNA probe bonding (?I) for electrochemical determination of these heavy metal ions. Detection limits were 8.0?×?10^?12 M and 1.0?×?10^?11 M for Hg²⁺ and Ag⁺ ions determination, respectively. The biosensors were utilized to determine the weight percent of toxic metals, i.e., silver and mercury in dental amalgam filling composition. The results of their practical applicability in analysis of the amalgam sample were satisfactory.     

Selective removal of heavy metal ions using sol-gel immobilized and SPE-coated thiacrown ethers

Sorbent materials based on three thiacrown ethers, 1,4,7,10-tetrathiacyclododecane (12S4), 1,4,7,10,13-pentathiacyclopentadecane (15S5) and 1,4,7,10.13,16-hexathiacyclooctadecane (18S6) were prepared either by immobilizing the ligands into sol-gel (SG) matrix or coating on commercial solid phase extraction (SPE) column. SG sorbents were characterized by FT-IR, energy dispersive X-ray microanalysis (EDX) and thermogravimetric analysis/derivative thermogravimetric analysis (TGA/DTG). A marked thermal stability of the ligands when immobilized in sol-gel matrix was noted. The competitive sorption characteristics of a mixture of eleven metal ions (Mg²⁺, Zn²⁺, Cd²⁺, Co²⁺, Mn²⁺, Ca²⁺, Cu²⁺, Ni²⁺, Ag⁺, V⁴⁺, Hg²⁺) using: (i) batch method with ligands trapped in SG matrices, and (ii) off-line SPE column containing coated ligands were studied using ICP-MS. The extraction of metals were optimized for key parameters such as pH, contact time/flow rate, particle size (for SG sorbents) and ligand concentration. Under the optimized conditions, all the immobilized thiacrown ethers exhibited highest selectivity toward Ag⁺, with lesser responses to Hg²⁺ while the extraction of other metal ions were negligible. Among the SG sorbents, 18S6-SG offer the highest capacity and the best selectivity over Hg²⁺. However, for practical applications such as for selective isolation and preconcentration of Ag⁺, the SPE type especially based on 18S6 is preferred as analysis time and recoveries are favorable. The sorbents can be repeatedly used three times as there was no significant deterioration in the metal uptake (%E > 90%) or interference from other metal ions. The optimized procedures were successfully applied for the separation and preconcentration of traces Ag⁺ in different water samples.     

Preparation,characterization and applications of polyurethane foam functionalized with resorcinol for quantitative separation and determination of silver(I) and mercury(II) from tap and wastewater

A stable chelating resin matrix was prepared by covalently linking resorcinol with polyurethane foam matrix through a –N=N– group. Preconcentration and determination of trace Ag⁺ and Hg²⁺ ions from samples of different origin, using Res-PUF, were studied. Various conditions influencing the sorption of these metal ions onto Res-PUF were optimized. The kinetics of sorption of the Ag⁺ and Hg²⁺ by Res-PUF were found to be fast, reached equilibrium in few minutes (5–10?min) and followed a first-order rate equation with an overall rate constant k in 0.102 and 0.267/min, respectively. Study of the variation of the sorption of the tested metal ions with temperature yielded average values for ΔG, ΔH and ΔS of ?3.94, ?22.02 and ?58.37, respectively. The mean free sorption energy (E) computed from the Dubinin–Radushkevich (D–R) isotherm was found to be equal to 8.91 kJ/mol, which reflects the chelation sorption process. The capacities of the foam material were 0.15 and 0.07?mmol/g for Ag⁺ and Hg²⁺, respectively. Preconcentration factors of?>?50 were achieved (RSD?≈?5.99). The proposed preconcentration procedure was applied successfully to the determination of trace metal ions in natural and wastewater samples.     

Analytical reactions of substituted cyanoferrates: 2. Pentacyanoamminoferrate (II) in catalytic spectrophotometric determination of sub-parts per million amounts of Ag+, Au3+, and Hg2+ in solution

The sub-parts per million amounts of Ag⁺, Au³⁺, and Hg²⁺ ions in solution have been determined by a catalytic spectrophotometric reaction. These ions catalyze the ligand exchange reaction between pentacyanoamminoferrate (II) ion and ferrozine [3-(2-pyridyl)-5,6-bis(4-phenylsulfonic acid)-1,2,4-triazine] to produce a strongly colored chelate absorbing at 562 mm. The relative standard deviations for Hg²⁺ (10 ppb), Ag⁺ (20 ppb), and Au³⁺ (100 ppb) do not exceed 5%. The reaction is rapid in slightly acidic medium at room temperature. A mechanism is proposed and the effects of the experimental parameters have been determined.     

Synthesis and characterization of novel indole-containing half-crowns as new emissive metal probes

Two new indole derivatives have been synthesized by a one-pot procedure and their potential as fluorescence probes for metal ions was investigated. The sensor capability of 1 and 2 toward cations such as Ag⁺, Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺, and Hg²⁻ was studied in dichloromethane solution by absorption, fluorescence emission, and ¹H NMR titrations. Both probes showed selectivity for Ag⁺ and Hg²⁺ ions. The results suggest that these compounds may serve as promising models for future design of novel and more potent sensors.     

Near-infrared cell-permeable Hg2+-selective ratiometric fluorescent chemodosimeters and fast indicator paper for MeHg+ based on tricarbocyanines

Three tricarbocyanine dyes (IR‐897, IR‐877, and IR‐925) with different thiourea substituents that function as dosimeter units through specific Hg²⁺‐induced desulfurization have been demonstrated in a fast indicator paper for Hg²⁺ and MeHg⁺ ions. In comparison with available Hg²⁺‐selective chemodosimeters, IR‐897 and IR‐877 show several advantages, such as convenient synthesis, very long wavelengths falling in the near‐infrared (NIR) region (650–900 nm) with high molar extinction coefficients, a ratiometric response, and quite low disturbance with Ag⁺ and Cu²⁺ ions. They exhibit large redshifts, which result in a clear color change from deep blue to pea green that can be easily monitored by the naked eye for a convenient indicator paper. In emission spectra, they display a characteristic turn‐off mode at 780 nm and turn‐on mode at 830 nm with titration of Hg²⁺ ions. Remarkably, the signal/noise (S/N) ratio with other thiophilic metal ions (Ag⁺ and Cu²⁺) is greatly enhanced with ratiometric measurement of two channels: excitation spectra mode (I_{810 nm}/I_{670 nm}, monitored at 830 nm) and emission spectra mode (I_{830 nm}/I_{780 nm}, isosbestic absorption point at 730 nm as excitation). The distinct response is dependent upon the electron‐donating effect of the thiourea substituents; that is, the stronger the electron‐donating capability of the thiourea substituents, the faster the Hg²⁺‐promoted cyclization. Additionally, experiments with living SW1116 cells show that these three tricarbocyanine dyes with low toxicity can exhibit special characteristics that are favorable for visualizing intracellular Hg²⁺ and MeHg⁺ ions in biological systems, including excellent membrane permeability, minimal interfering absorption and fluorescence from biological samples, low scattering, and deep penetration into tissues.     

Synthesis of silica gel-bound acridino-18-crown-6 ether and preliminary studies on its metal ion selectivity

Starting from commercially available and relatively cheap chemicals a novel silica gel-bound acridino-18-crown-6 ether was prepared. Selectivity of the latter stationary phase toward different metal ions was studied. The stationary phase showed appreciable selectivity for Ag⁺, Cu²⁺, and Hg²⁺ ions.     

Metal-Triggered DNA Folding by Different Mechanisms

Metal-mediated base pairs by the interaction between metal ions and artificial bases in oligonucleotides has been widely used in DNA nanotechnology and biosensing technique. Using isothermal titration calorimetry, circular dichroism spectroscopy and fluorescence spectroscopy, the folding process of T-C-rich oligonucleotides (TCO) induced by Hg²⁺ and Ag⁺ with the synthetic sequence d(T₆C₆T₆C₆T₆C₆T₆) was studied and analyzed. Although thermodynamic data predict that TCO should initially fold into a relatively stable hairpin through two possible pathways of conformational transitions whether Hg²⁺ or Ag⁺ were added at first, the mechanisms and final products between the two are entirely different from isothermal titration calorimetry outcomes. When Hg²⁺ were added first, the haipin was formed through T-Hg-T structure with further stabilization by C-Ag-C after Ag⁺ addition. However, it is proposed that an unusual metal-base pair for Ag⁺ binding is generated instead classical C-Ag-C when Ag⁺ was injected first. Moreover, further confirmation of this unconventional metal-base pair T-Ag-C was verified by circular dichroism and fluorescence spectroscopy.     

Synthesis and metal extraction behavior of pyridine and 1,2,4-triazole substituted calix[4]arenes

Three series of heterocycle substituted calixarenes, derivatized at lower and upper rim, were synthesized and successfully evaluated for metal extraction towards alkali, alkaline, transition and heavy metal ions. The presence and placement of sulfur, heterocycle functionality at upper/lower rim played a crucial role toward the extractability and selectivity of metal ions. The lower rim substituted calixarenes have shown high extractability and poor selectivity. In contrast to this, upper rim substituted calixarenes exhibited good selectivity. Moreover, sulfur functionalized calixarenes have shown better selectivity for heavy metal ions than alkali and alkaline metal ions. Among upper rim substituted calixarenes, 17 and 18 were found to be suitable for Na⁺, K⁺ and Ag⁺, 19,13 for heavy metal ions i.e., Pb²⁺, Hg⁺, Hg²⁺ and Ag⁺, and 11,12 for Pb²⁺ and Ag⁺ only.     

Electrochemical metal-ion sensor based on a cobalt phthalocyanine complex captured in Nafion® on a glassy carbon electrode

This article describes an electrochemical metal-ion sensor based on a cobalt phthalocyanine (CoPc) complex and determination of its sensor activity for some transition metal ions. Ag⁺ and Hg²⁺, among several transition metal ions, coordinate to the sulfur donors of CoPc and alter the electrochemical responses of CoPc in solution, indicating possible application of the complex as Ag⁺ and Hg²⁺ sensor. For practical application, CoPc was encapsulated into a polymeric cation exchange membrane, Nafion, on a glassy carbon electrode and used as an electrochemical coordination element. This composite electrode was potentiometrically optimized and potentiometrically and amperometrically characterized as transition metal-ion sensors with respect to reproducibility, repeatability, stability, selectivity, linear concentration range, and sensitivity. A µmol?dm^?3 sensitivity of the CoPc-based sensor indicates its possible practical application for the determination of Ag⁺ and Hg⁺² in waste water samples.     

Distribution studies of metal ions on arsenophosphates of Sn(IV) and Cr(III) and on amine Sn(II) hexacyanoferrates (II) using radio tracers: Separation of Sr2+−Cs+, Hg2+−Ag+ and Hg2+−Zn2+

Summary Distribution studies of some metal ions have been made on Sn(IV) and Cr(III) arsenophosphates and on some samples of Sn(II) amine hexacyanoferrates(II), using radiotracers. The K_d values of Cs⁺ and Rb⁺ have been followed at varying HNO₃ concentrations also. As a result 3 useful binary separations have been achieved on Sn(IV) and Cr(III) arsenophosphates, such as Sr²⁺–Cs⁺, Hg²⁺–Ag⁺ and Hg²⁺–Zn²⁺.