Evaluation of Electrochemically Reduced Gold Nanoparticle—Graphene Nanocomposites for the Determination of Dopamine

Two gold nanoparticle-graphene nanocomposites were electrochemically obtained by the one-step constant potential coreduction of graphene oxide and gold ions or the electrodeposition of gold nanoparticles on graphene oxide followed by electrochemical reduction of graphene oxide. The surface morphology, electron transfer rate, and electrocatalytic activity toward the oxidation of dopamine on these nanocomposites were systematically studied. The results showed that both preparations synthesized gold nanoparticle-graphene nanocomposites. The nanocomposite obtained by the one-step synthesis showed higher electron transfer kinetics and electrocatalytic activity toward dopamine than the material obtained by the two-step synthesis. Consequently, the one-step nanocomposite was used to modify a glassy carbon electrode to form a dopamine sensor. Differential pulse voltammetry was used to detect dopamine with a detection limit of 0.1 micromolar and a linear dynamic range from 0.2 to 20 micromolar. The sensor displayed good stability, high reproducibility, and was used for the determination of dopamine in human urine.     

Acetylcholinesterase Biosensor Based on Reduced Graphene Oxide – Carbon Black Composite for Determination of Reversible Inhibitors

For the first time, acetylcholinesterase (AChE) biosensors based on mixed carbon nanomaterials (electrochemically reduced graphene oxide (ERGO) and carbon black (CB) particles) were described for the determination of antidementia drugs. Changes in the content of underlying layer allowed varying selectivity and sensitivity of the inhibitor determination. Appropriate limits of detection (LOD) varied in the range from 1 pM to 0.1 nM for donepezil, 5 nM–0.1 μM for berberine, 0.1–50 nM for huperzine A and 0.1–300 nM for galantamine. Variation in the inhibition measurement parameters can be used for increasing selectivity of the measurements.     

Study on Polyoxomolybdate [Mo8O26]4− Based Crystalline Compound and Its Polypyrrole Nanocomposite as l-Cysteine Colorimetric Biosensor

Journal of Cluster Science - A new octamolybdate based organic–inorganic hybrid compound with unusual Ag–Ag chain, [Ag2(bit)2]2[Mo8O26], was successfully synthesized and well...     

Fabrication of Cobaltosic Oxide Nanoparticle-Doped 3 D MXene/Graphene Hybrid Porous Aerogels for All-Solid-State Supercapacitors

MXenes are a new family of 2 D transition metal carbides and nitrides, which have attracted enormous attention in electrochemical energy storage, sensing technology, and catalysis owing to their good conductivity, high specific surface area, and excellent electrochemical properties. In this work, a series of Co₃O₄-doped 3 D MXene/RGO hybrid porous aerogels is designed and prepared through a facile in situ reduction and thermal annealing process, in which the reduced graphene oxide (RGO) conductive network can electrically link the separated Co₃O₄-MXene composite nanosheets, leading to enhanced electronic conductivity. It is found that upon using the Co₃O₄-MXene/RGO hybrid porous aerogel prepared with a mass ratio of Co₃O₄-MXene/RGO of 3:1 (CMR31) as an electrode for a supercapacitor, a superior specific capacitance of 345 F g⁻¹ at the current density of 1 A g⁻¹ is achieved, which is significantly higher than those of Ti₃C₂T_x MXene, RGO, and MXene/RGO electrodes. In addition, a high capacitance retention (85 % of the initial capacitance after 10 000 cycles at a high current density of 3 A g⁻¹) and a low internal resistance R_s (0.44 Ω) can be achieved. An all-solid-state asymmetric supercapacitor (ASC) device is assembled using CMR31, and it has the ability to light up a blue LED indicator for 5 min if four ASCs are connected in series. Therefore, these novel Co₃O₄-MXene/RGO hybrid porous aerogels have potential practical applications in high-energy storage devices.     

A Two-Dimensional Mesoporous Polypyrrole–Graphene Oxide Heterostructure as a Dual-Functional Ion Redistributor for Dendrite-Free Lithium Metal Anodes

Guiding the lithium ion (Li-ion) transport for homogeneous, dispersive distribution is crucial for dendrite-free Li anodes with high current density and long-term cyclability, but remains challenging for the unavailable well-designed nanostructures. Herein, we propose a two-dimensional (2D) heterostructure composed of defective graphene oxide (GO) clipped on mesoporous polypyrrole (mPPy) as a dual-functional Li-ion redistributor to regulate the stepwise Li-ion distribution and Li deposition for extremely stable, dendrite-free Li anodes. Owing to the synergy between the Li-ion transport nanochannels of mPPy and the Li-ion nanosieves of defective GO, the 2D mPPy-GO heterostructure achieves ultralong cycling stability (1000 cycles), even tests at 0 and 50 °C, and an ultralow overpotential of 70 mV at a high current density of 10.0 mA cm⁻², outperforming most reported Li anodes. Furthermore, mPPy-GO-Li/LiCoO₂ full batteries demonstrate remarkably enhanced performance with a capacity retention of >90 % after 450 cycles. Therefore, this work opens many opportunities for creating 2D heterostructures for high-energy-density Li metal batteries.     

Engineering Na−Mo−O/Graphene Oxide Composites with Enhanced Electrochemical Performance for Lithium Ion Batteries

Sodium molybdate (Na−Mo−O) wrapped by graphene oxide (GO) composites have been prepared via a simple in-situ precipitation method at room temperature. The composites are mainly constructed with one dimension (1D) ultra-long sodium molybdate nanorods, which are wrapped by the flexible GO. The introduction of GO is expected to not merely provide more active sites for lithium-ions storage, but also improve the charge transfer rate of the electrode. The testing electrochemical performances corroborated the standpoint: The Na−Mo−O/GO composites delivers specific capacities of 718 mAh g⁻¹ after 100 cycles at 100 mA g⁻¹, and 570 mAh g⁻¹ after 500 cycles at a high rate of 500 mA g⁻¹; for comparison, the bare Na−Mo−O nanorod shows a severe capacity decay, which deliver only 332 mAh g⁻¹ after 100 cycles at 100 mA g⁻¹. In view of the cost-efficient and less time-consuming in synthesis, and one-step preparation without further treatment, these Na−Mo−O nanorods/GO composites present potential and prospective anodes for LIBs.     

Dual Dopamine Derived Polydopamine Coated N-Doped Porous Carbon Spheres as a Sulfur Host for High-Performance Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries are considered to be one of the most promising energy storage systems owing to their high energy density and low cost. However, their wide application is still limited by the rapid capacity fading. Herein, polydopamine (PDA)-coated N-doped hierarchical porous carbon spheres (NPC@PDA) are reported as sulfur hosts for high-performance Li-S batteries. The NPC core with abundant and interconnected pores provides fast electron/ion transport pathways and strong trapping ability towards lithium polysulfide intermediates. The PDA shell could further suppress the loss of lithium polysulfide intermediates through polar–polar interactions. Benefiting from the dual function design, the NPC/S@PDA composite cathode exhibits an initial capacity of 1331 mAh g⁻¹ and remains at 720 mAh g⁻¹ after 200 cycles at 0.5 C. At the pouch cell level with a high sulfur mass loading, the NPC/S@PDA composite cathode still exhibits a high capacity of 1062 mAh g⁻¹ at a current density of 0.4 mA cm⁻².     

Amperometric Biosensor for Hypoxanthine Based on Immobilized Xanthine Oxidase on Iron (III) Meso‐tetraphenylporphyrin Nanoparticles Modified Glassy Carbon Electrode

Abstract

The preparation and performance of hypoxanthine (Hx) electrochemical biosensor, which was based on iron (III) meso‐tetraphenylporphyrin (FeTPP) nanoparticles (NPs), is reported in this work. FeTPP NPs prepared by mixing solvent techniques with diameters ca. 25~45 nm and were used as a mediator. The XOD/FeTPPNP/GC electrode exhibited good amperometric signal for Hx. Based on the consumption of dissolved oxygen during the oxidation process of Hx catalyzed by the immobilized XOD, the biosensor could detect the concentration of Hx up to 0.34 mM with a detection limit of 1.0 µM. The usefulness of this biosensor for the analysis of real sample was also demonstrated by determining Hx in rat brain dialysate coupled with microdialysis.     

Caging Porous Co-N-C Nanocomposites in 3D Graphene as Active and Aggregation-Resistant electrocatalyst for Oxygen Reduction Reaction北大核心CSCD

Oxygen reduction reaction (ORR) is the cornerstone reaction of many renewable energy technologies such as fuel cells and rechargeable metal-air batteries.The Pt-based electrocatalysts exhibit the highest activity toward ORR, but their large implementation is greatly prohibiting by unaffordable cost and inferior durability.During electrode manufacturing and electrochemical reaction, severe aggregation of catalyst nanoparticles induced by size effect further limits the operational performance of electrocatalysts.We report a new strategy for fabrication of active and aggregation-resistant ORR electrocatalyst by caging metal-organic frameworks derived Co-N-C nanocomposites in permeable and porous 3D graphene cages via sprayed drying the mixed colloids of ZIF-67 nanoparticles and graphene oxide, followed by annealing.The 3D graphene cages around Co-N-C nanocomposites not only provide a continuous conductive network for charge transfer, but also prevent the active phase from aggregation during electrode manufacturing and electrochemical reactions.When evaluated as an ORR electrocatalyst, the material exhibited comparable activity but superior stability to commercial Pt/C catalyst in an alkaline electrolyte. © 2018 Chinese Chemical Society. All rights reserved.     

Metalated Porous Phenanthroline-Based Polymers as Efficient Heterogeneous Catalysts for Regioselective C−H Activation of Heteroarenes

Direct C−H bond activation of heterocycles as a step-economical and environmentally friendly approach to build the heterobiaryls motifs is highly attractive, but it still has a challenge to design and prepare a cheap and regioselective heterogeneous catalyst. To tackle this challenge, we have introduced Ni species into a porous phenanthroline-based organic polymer donated as POP-Phen@Ni. This heterogeneous catalyst shows excellent catalytic performances in regioselective C−H activation of heterocycles, even better than those of the corresponding homogenous catalyst. H/D exchange experiments show that the lithium bis(trimethylsilyl)amide (LiHMDS), a base added in the reaction, play a very important role during the reaction processes. We believe that this heterogeneous catalyst would open a new door for design of heterogeneous catalysts to efficiently catalyze the regioselective C−H activation of heterocycles.     

Porous Organic Phenanthroline-Based Polymer as an Efficient Transition-Metal-Free Heterogeneous Catalyst for Direct Aromatic C−H Activation

Direct C−H bond transformation has been regarded as one of the most important areas in organic synthesis in both academia and industry. However, the heterogeneous transition-metal-free catalysis of direct C−H bond transformation has remained a contemporary challenge. To tackle this challenge, we designed and constructed a porous phenanthroline-based polymer (namely POP-Phen) via free radical polymerization of vinyl-functionalized phenanthroline monomers. POP-Phen shows excellent catalytic performances in transition-metal-free catalyzed C−H arylation, even better than those of the corresponding homogeneous catalyst, which is mainly attributed to the high density of catalytically active sites in the heterogeneous catalyst. Kinetic isotope experiments and spectral characterizations demonstrate the electron-transfer between the heterogeneous catalyst and the base (t-BuOK), a key step for C−H activation. We believe that this porous organic phenanthroline polymer could open a new door for the design of novel heterogeneous transition-metal-free catalysts for direct C−H activation.     

Hierarchical Mn3O4 Anchored on 3D Graphene Aerogels via C−O−Mn Linkage with Superior Electrochemical Performance for Flexible Asymmetric Supercapacitor

Flexible asymmetric supercapacitors are more appealing in flexible electronics because of high power density, wide cell voltage, and higher energy density than symmetric supercapacitors in aqueous electrolyte. In virtues of excellent conductivity, rich porous structure and interconnected honeycomb structure, three dimensional graphene aerogels show great potential as electrode in asymmetric supercapacitors. However, graphene aerogels are rarely used in flexible asymmetric supercapacitors because of easily re-stacking of graphene sheets, resulting in low electrochemical activity. Herein, flower-like hierarchical Mn₃O₄ and carbon nanohorns are incorporated into three dimensional graphene aerogels to restrain the stack of graphene sheets, and are applied as the positive and negative electrode for asymmetric supercapacitors devices, respectively. Besides, a strong chemical coupling between Mn₃O₄ and graphene via the C-O-Mn linkage is constructed and can provide a good electron-transport pathway during cycles. Consequently, the asymmetric supercapacitor device shows high rate cycle stability (87.8 % after 5000 cycles) and achieves a high energy density of 17.4 μWh cm⁻² with power density of 14.1 mW cm⁻² (156.7 mW cm⁻³) at 1.4 V.     

Synthesis and Evaluation of Graphene Aerogel-Supported MnxFe3−xO4 for Oxygen Reduction in Urea/O2 Fuel Cells

Graphene aerogel-supported manganese ferrite (Mn_xFe_3−xO₄/GAs) and reduced-graphene oxide/manganese ferrite composite (MnFe₂O₄/rGO) were synthesized and studied as cathode catalysts for oxygen reduction reactions in urea/O₂ fuel cells. MnFe₂O₄/GAs exhibited a 3D framework with a continuous macroporous structure. Among the investigated Fe/Mn ratios, the more positive oxygen reduction onset potential was observed with Fe/Mn=2/1. The half-wave potential of MnFe₂O₄/GAs was considerably more positive than that of MnFe₂O₄/rGO and comparable with that of Pt/C, while the stability of MnFe₂O₄/GAs significantly higher than that of Pt/C. The best urea/O₂ fuel cell performance was also observed with the MnFe₂O₄/GAs. The MnFe₂O₄/GAs exhibited an OCV of 0.713 V and a maximum power density of 1.7 mW cm⁻² at 60 °C. Thus, this work shows that 3D structured graphene aerogel-supported MnFe₂O₄ catalysts can be used as an efficient cathode material for alkaline fuel cells.     

Nanopolyaniline Coupled with an Anticorrosive Graphene as a 3D Film Electrocatalyst for Efficient Oxidation of Toluene Methyl C−H Bonds and Hydrogen Production at Low Voltage

A graphene-wrapped polyaniline nanoparticles film embedded in carbon cloth (CC/PANI/G) was fabricated and used as a 3D anodic electrocatalyst for oxidation of toluene methyl C−H groups. The methyl C−H bonds can be oxidized effectively at the CC/PANI/G anode with 99.9 % toluene conversion at a low applied voltage of only 1.0 V, which implies low energy input. Importantly, 86.6 % of toluene methyl C−H groups were converted to benzoyl groups (C=O), and hydrogen was produced efficiently at the cathode. The electrocatalytic efficiency at the CC/PANI/G anode was higher at lower voltage (1.0 V) than at higher voltage (1.5 V), and more hydrogen was produced at the corresponding cathode. The synergistic effect between the dynamic redox chemistry of nanoPANI and the excellent conductivity and anticorrosive action of graphene determined the high electrocatalytic efficiency of the oxidation of toluene methyl C−H groups at the CC/PANI/G anode. Owing to the chemical bonding between graphene and PANI, the anticorrosive CC/PANI/G anodic electrocatalyst was durable and effective for oxidation of toluene methyl C−H groups in acidic environment. This approach provides advanced electrode materials for transforming stable chemical bonds (C−H) into useful functional groups (C=O), which will be beneficial for the synthesis of organic intermediates with coupled hydrogen production.