Capillary zone electrophoresis study of cyclodextrin--lipoic acid host-guest interaction

Lipoic acid is a naturally occurring compound which is being widely investigated for its therapeutic effects in the treatment or prevention of a variety of diseases associated with oxidative injury, particularly diabetes. The diversity of therapeutic applications of lipoic acid requires an appropriate formulation to control its bioavailability, site-targeting delivery and to overcome its inherent chemical instability. In this regard, cyclodextrins (CDs) are ideally suitable due to their well-documented ability to include in their cavity proper guest molecules and protect them from physical or chemical damages. Lipoic acid forms 1:1 inclusion complexes with betaCD as shown in a previous report of an extended investigation that also indicated the suitability of capillary zone electrophoresis (CZE) for the study of such host-guest interactions. In view of these possible applications, we extended the CZE analysis to determine the strength of binding, in a pH 9 phosphate buffer, of lipoic acid with other CD derivatives such as alphaCD, gammaCD and the alkylated derivatives of betaCD, namely (2-hydroxypropyl)-beta-CD (HPbetaCD), and heptakis(2,3,6-tri-O-methyl)-beta-CD (TMbetaCD). Once established that the easily available betaCD is the most suitable receptor for lipoic acid, we set up and here describe a simple and reliable procedure for the quantitative determination of lipoic acid in commercial dietary supplement tablets containing also other active substances and excipients.     

Capillary zone electrophoresis tandem mass spectrometry detects low concentration host cell impurities in monoclonal antibodies

We have evaluated CZE‐ESI‐MS/MS for detection of trace amounts of host cell protein impurities in recombinant therapeutics. Compared to previously published procedures, we have optimized the buffer pH used in the formation of a pH junction to increase injection volume. We also prepared a 5‐point calibration curve by spiking 12 standard proteins into a solution of a human mAb. A custom CZE‐MS/MS system was used to analyze the tryptic digest of this mixture without depletion of the antibody. CZE generated a ～70‐min separation window (～90‐min total analysis duration) and ～300‐peak capacity. We also analyzed the sample using ultra‐performance LC‐MS/MS. CZE‐MS/MS generated approximately five times higher base peak intensity and more peptide identifications for low‐level spiked proteins. Both methods detected all proteins spiked at ～100 ppm level with respect to the antibody.     

The study of polyoxometalates formation using capillary zone electrophoresis

The formation process of polyoxometalates [PMo₁₂O₄₀]^3? and [PMo_{12 ? x}V_xO₄₀]^?3?x has been studied in aqueous solutions of 0.1 M malonate buffer at pH 2.8–3.0 using CZE. Two different approaches, pre‐capillary and in‐capillary, were examined and compared. In precapillary mode, the reaction mixture of the reactants and reaction products was injected into the capillary followed by the separation procedure. In in‐capillary mode, the sequential input of the reagents and running electrolyte into the capillary and the species separation occurs simultaneously. The optimal parameters of in‐capillary separation were established as functions of applied voltage and the length of the intermediate buffer zone between the reagents in the capillary. As a result the best‐compromise conditions for the separation of the mixtures containing the reactants, intermediates, and reaction products, in order to achieve the best efficiency, symmetry, and peak areas, were achieved at ?18 kV and the input parameter of 900 mbar·s. It was also shown that in‐capillary mode is more informative than pre‐capillary mode for studying the complex compound formation process.     

Capillary zone electrophoresis as a tool for the quality control of goldenseal extracts

The root extracts of goldenseal (Hydrastis canadensis L.) are popular phytomedicines for the treatment of gastrointestinal disorders and upper respiratory tract infections. Here we describe a simple and fast capillary zone electrophoresis (CZE) method with ultraviolet detection at 225 nm for the quantification of the major goldenseal constituents, berberine and hydrastine, in herbal remedies containing goldenseal root extracts. Tritoqualine, an antihistaminic drug with a hydrastine-like phthalidisoquinoline structure, was applied as an internal standard. The running buffer was a 1:5 mixture of 500 mM ammonium acetate (adjusted to pH 3.4 with acetic acid) and methanol. Our newly developed CZE method was validated regarding limit of detection (LOD), limit of quantification, linearity, accuracy and precision. For both berberine and hydrastine, the LOD was 1.0 microg/mL and the linearity was obtained between 2.5 and 500 microg/mL. Using our newly developed method, both the alkaloids could be analysed in herbal remedies containing goldenseal root extracts within 8 min.     

Capillary electrophoresis determination of carnitine in food supplements

L-Carnitine is a substance natural for human body which transfers fatty acids to the place of burning-mitochondria and aids the transformation of fats into energy and this way supports overweight reduction and immediate physical performance, increases resistance from physical load and protect heart from overload. In this study are described newly developed electrophoretic methods (ITP, CZE with direct and/or indirect UV detection) for carnitine determination in various samples. The results were compared with results obtained by validated HPLC method. All of these methods gave comparable results. The detection limits of the electrophoretic methods were between 2.4 and 4.7 microg/ml, reproducibility (relative standard deviation, RSD%) was between 1.2 and 4.4% and recoveries were between 91 and 113% in different samples. The shorter analysis and low running cost are the main advantages of CE methods.     

Capillary electrophoresis for rapid identification of monoclonal antibodies for routine application in hospital

mAbs are widely used in cancer therapy. Their compounding, performed just before their administration to patients, is executed in a production unit of the hospital. Identification of these drugs, individually prepared in bags for infusion before patient administration, is of paramount importance to detect potential mistakes during compounding stage. A fast and reliable analytical method based on CZE combined to a cationic capillary coating (hexadimethrine bromide) was developed for identification of the most widely used compounded therapeutic for cancer therapy (bevacizumab, cetuximab, rituximab, and trastuzumab). Considering the high structural and physico‐chemical similarities of these mAbs, an extensive optimization of the BGE composition has been performed. The addition of perchlorate ions and polysorbate in the BGE greatly increased the resolution. To validate the method, an internal standard was used and the relative migration times (RTm) were estimated. Very satisfactory RSDs of the RTm for rituximab (0.76%), cetuximab (0.46%), bevacizumab (0.31%), and trastuzumab (0.60%) were obtained. The intraday and interday RSD of the method were less than 0.32 and 1.3%, respectively for RTm. Significant differences between theses RTms have been demonstrated allowing mAbs identification. Finally, accurate mAbs identification has been demonstrated by a blind test.     

Determination of lipoic acid in human urine by capillary zone electrophoresis

Fast, simple, and accurate CE method enabling determination of lipoic acid (LA) in human urine has been developed and validated. LA is a disulfide‐containing natural compound absorbed from the organism's diet. Due to powerful antioxidant activity, LA has been used for prevention and treatment of various diseases and disorders, e.g. cardiovascular diseases, neurodegenerative disorders, and cancer. The proposed analytical procedure consists of liquid–liquid sample extraction, reduction of LA with tris(2‐carboxyethyl)phosphine, derivatization with 1‐benzyl‐2‐chloropyridinium bromide (BCPB) followed by field amplified sample injection stacking, capillary zone electrophoresis separation, and ultraviolet‐absorbance detection of LA‐BCPB derivative at 322 nm. Effective baseline electrophoretic separation was achieved within 6 min under the separation voltage of 20 kV (∼80 μA) using a standard fused‐silica capillary (effective length 51.5 cm, 75 μm id) and BGE consisted of 0.05 mol/L borate buffer adjusted to pH 9. The experimentally determined limit of detection for LA in urine was 1.2 μmol/L. The calibration curve obtained for LA in urine showed linearity in the range 2.5–80 μmol/L, with R ² 0.9998. The relative standard deviation of the points of the calibration curve was lower than 10%. The analytical procedure was successfully applied to analysis of real urine samples from seven healthy volunteers who received single 100 mg dose of LA.     

Capillary zone electrophoresis with UV-scanning detection for the analysis of metal species and their organic binding partners in biological systems

A capillary zone electrophoretic method with UV-scanning detection for the separation and identification of both free ligands and metal species is presented. The electrophoretic behavior of naturally occurring binding partners such as organic acids and amino acids was studied and compared with their metal-complexes. Copper(II) complexes of citrate and amino acids showed decreased electrophoretic mobilities and altered UV spectra. The optimized method was validated on ultrafiltered cow's milk and human milk samples. In cow's milk six low molecular weight substances, including citrate, orotate, and hippurate, could be separated. Metal supplementation with Cu(II), Ni(II), or Zn(II) decreased not only the citrate peak but also the orotate signal and in the case of copper(II) supplementation a new signal for the copper(II)-citrate complex appeared. In human milk samples various amino acids such as glutamate, phenylalanine, tyrosine, and tryptophan could be identified besides citrate. The electrophoretic mobilites and peak areas of the amino acids were also influenced by the metal supplementation.     

Field amplified sample injection‐capillary zone electrophoresis for the analysis of amprolium in eggs

Veterinary medicines are widely administered to farm animals since they keep animals healthy at overcrowded conditions. Nevertheless the continuous administration of medicines to farm animals can frequently lead to the presence of residues of veterinary drugs in consumption products. Amprolium is a quaternary ammonium compound used in the treatment of coccidiosis. In this paper, a method based on CZE to analyze residues of amprolium in eggs was developed and validated for the first time. Parameters such as electrolyte type, concentration, and pH were optimized. In order to improve sensitivity, field‐amplified sample injection (FASI) was used for in‐line preconcentration after a quick and simple sample treatment based on SPE (Envi‐Carb). During method‐validation studies using egg samples, a matrix interference was found at the migration time of amprolium. This compound was identified as thiamine and confirmed by MSⁿ experiments using CEcoupled to MS (CE‐MS) with an ion‐trap mass analyzer. CZE conditions were reoptimized to separate thiamine from amprolium allowing the quantification of amprolium in eggs at concentrations down to 75 μg/kg, which are far below the MRL‐legislated values.     

Capillary zone electrophoresis for the characterization of latex particles

Capillary zone electrophoresis (CZE) was applied to the separation of acrylic styrene copolymer emulsion particles. Fast separations could be performed on samples containing chemically identical latex particles of different size, as well as on samples with particles of the same size but differing in chemical composition. The developed method was also used for the analysis of water soluble fractions of urethane dispersions. Additionally, the physical interaction between different particles (e.g., acrylic and urethane particles) could be studied using this method. The separation mechanism is based on the zeta potential of the particles and the relaxation effect under the applied analytical conditions.     

Hybrid phospholipid bilayer coatings for separations of cationic proteins in capillary zone electrophoresis

Protein separations in CZE suffer from nonspecific adsorption of analytes to the capillary surface. Semipermanent phospholipid bilayers have been used to minimize adsorption, but must be regenerated regularly to ensure reproducibility. We investigated the formation, characterization, and use of hybrid phospholipid bilayers (HPBs) as more stable biosurfactant capillary coatings for CZE protein separations. HPBs are formed by covalently modifying a support with a hydrophobic monolayer onto which a self‐assembled lipid monolayer is deposited. Monolayers prepared in capillaries using 3‐cyanopropyldimethylchlorosilane (CPDCS) or n‐octyldimethylchlorosilane (ODCS) yielded hydrophobic surfaces with lowered surface free energies of 6.0 ± 0.3 or 0.2 ± 0.1 mJ m^?2, respectively, compared to 17 ± 1 mJ m^?2 for bare silica capillaries. HPBs were formed by subsequently fusing vesicles comprised of 1,2‐dilauroyl‐sn‐glycero‐3‐phosphocholine or 1,2‐dioleoyl‐sn‐glycero‐3‐phosphocholine to CPDCS‐ or ODCS‐modified capillaries. The resultant HPB coatings shielded the capillary surface and yielded reduced electroosmotic mobility (1.3–1.9 × 10^?4 cm² V^?1s^?1) compared to CPDCS‐ and ODCS‐modified or bare capillaries (3.6 ± 0.2 × 10^?4 cm² V^?1s^?1, 4.8 ± 0.4 × 10^?4 cm² V^?1s^?1, and 6.0 ± 0.2 × 10^?4 cm² V^?1s^?1, respectively), with increased stability compared to phospholipid bilayer coatings. HPB‐coated capillaries yielded reproducible protein migration times (RSD ≤ 3.6%, n ≥ 6) with separation efficiencies as high as 200 000 plates/m.     

Capillary zone electrophoresis for the analysis of glycoforms of cellobiohydrolase

Cellobiohydrolase (CBH) is an important enzyme for the conversion of lignocellulosic biomass to ethanol. This work separated the glycoforms of CBH possessing different numbers of neutral mannoses using capillary zone electrophoresis (CZE) in a 50 mM, pH 7.5 phosphate buffer. The method analysed CBH in an intact form using a polyacrylamide coated fused silica capillary without requiring additives or labelling of the enzyme. The migration time of the major peak was found to be 21.6±0.1 min (n=3) and the approach is suitable for testing of batch-to-batch consistency of CBH. Ease-of-use, automation and speed are the other benefits due to which the use of CZE for analysing glycoforms of CBH was concluded to be ideal.     

Comparison of shikimic acid determination by capillary zone electrophoresis with direct and indirect detection with liquid chromatography for varietal differentiation of red wines

Two capillary zone electrophoretic (CZE) methods for determination of shikimic acid in Chilean red wine were developed and compared with a HPLC method. Both electrophoretic methods were carried out by using a reversed electroosmotic flow induced by trimethyl(tetradecyl)ammoniumbromide (TTAB) with indirect detection at 260 nm using p-aminobenzoic acid as a UV-absorbing co-ion or by direct detection at 213 nm. In both cases, the separation was carried out in a 50 microm I.D. uncoated capillary with an effective length of 48 cm, a negative power supply of 30 kV, using a buffer based on bis[2-hydroxyethyl]imino-tris[hydroxymethyl]methane (Bis-Tris), pH 7.0 or 7.5 and hydrodynamic injection. The chromatographic separations were carried out on a C-18 reversed phase column followed by a sulfonyl-styrene-divinylbenzene (S-DVB) ion exclusion column at 70 degrees C with H2SO4 0.02 M as isocratic mobile phase and a flow rate of 0.5 mL min(-1). The three methods allowed the quantification of shikimic acid with quantification limits between 1.0 and 12.0 mg L(-1) and precision between 7.3 and 10.1%, however, only the concentrations obtained by CZE with direct detection were statistically similar to those of HPLC. This parameter was evaluated as analytical tool to verify varietal authenticity of red wines. In all cases, the Cabernet Sauvignon wines presented higher concentrations of shikimic acid, compared with Merlot or Carmenère wines.     

Capillary electrophoresis as a simple and sensitive method to study polysaccharides of Sinorhizobium sp. NGR234

We report the minimum amounts of polysaccharides (6.5 ng) that can be studied using capillary electrophoresis-laser-induced fluorescence (CE-LIF) and describe the separation of the various monosaccharides susceptible to occur in Sinorhizobium cell wall. On-gel hydrolysis of the polysaccharides is described. It allowed the easy and rapid determination of the monosaccharide composition of the excised lipopolysaccharides. The composition obtained fits with gas chromatography-mass spectrometry (GC-MS) results. This study underlines the simplicity of using CE-LIF, which remains an entirely "water medium" method, unlike GC-MS which is, in addition, less sensitive (at least 100-fold) than CE-LIF.     

Rapid analysis of charge variants of monoclonal antibodies with capillary zone electrophoresis in dynamically coated fused-silica capillary

A capillary zone electrophoresis (CZE) method was developed for the rapid analysis of charge heterogeneity of immunoglobulin G (IgG) monoclonal antibodies (mAbs). The separation was carried out in a short, dynamically coated fused-silica capillary. A number of separation parameters were investigated and optimized, including pH, concentration of the separation buffer (ε-amino caproic acid), concentration of the triethylenetetramine (TETA) dynamic coating, the capillary internal diameter and the field strength used for the separation. The effects of between-run flushing of the capillary and the data acquisition rate were also evaluated. Under the optimized conditions, a fast (<5 min), selective and reproducible separation of mAb charge variants was achieved under a very high electric field strength (1000 V/cm). This method also requires only a short conditioning of the capillary, with between-run conditioning completed within 2 min. The method was evaluated for specificity, sensitivity, linearity, accuracy and precision. The same separation conditions were applied to the rapid separation (2-5 min) of charge variants of multiple monoclonal antibodies with pI in the range of 7.0-9.5. Compared with other existing methods for charge variants analysis, this method has several advantages including a short run time, rapid capillary conditioning and simple sample preparation.     

Synthesis and photolytic evaluation of a nitroindoline-caged glycine with a side chain of high negative charge for use in neuroscience

A photolabile precursor of the neuroinhibitory amino acid glycine has been synthesised with two phosphate groups attached to the indoline nucleus at a 4-alkoxy substituent. In common with the photochemical properties of other 1-acyl-7-nitroindolines, this releases glycine on a sub-μs time scale upon irradiation with near-UV light. The synthetic route previously developed for the preparation of the GABA analogue required some modifications because of the greater hydrolytic sensitivity of the glycine compound. The phosphorylation method used here could be beneficial to the synthesis of other nitroindoline-caged amino acids, especially the related caged GABA derivative. Glycine released by laser photolysis on spinal cord neurons generated fast-rising responses and the pharmacological properties of the reagent are such that it is useful for physiological experiments.     

Capillary zone electrophoresis method for the simultaneous determination of cations in honey

A capillary electrophoresis system for the simultaneous determination of cations in honey samples has been developed. The complete separation and quantification of K+, Ca2+, Na+, Mg2+, Mn2+, Ni2+ and Li+, which represent more than 99% of the total content of cations in honey, can be achieved in 4 min with only a dilution and filtration of the honey sample. Electrolyte solution was composed by 10 mM imidazole as the carrier buffer and background absorbance provider and acetic acid as the complexing agent (pH 3.60). The running voltage was + 25 kV at 25 degree C. Indirect UV detection was achieved at 185 nm. Under the optimum conditions the detection limits ranged from 0.02 to 48.2 mg/kg and the quantification limits have ranged from 0.41 to 48.7 mg/kg. Precision data in honey samples analysed have shown repeatability and reproducibility RSD (%) lower than 2.84 and 6.62%, respectively. Recoveries of cations in honey samples analysed have ranged from 88.5 to 101.8%. These cations were identified by their relative migration times with regard to Ba2+ migration time used as reference standard and they were quantified by using an external standard calibration. Twenty-five honey samples were analysed to test the proposed method. Mean contents of 1.22 x 10(3), 93, 85, 54, 11, 1.9 and 2.3 mg/kg were found, respectively, for K+, Ca2+, Na+, Mg2+, Mn2+, Ni2+ and Li+ cations in analysed honeys. These results were similar than the obtained by other authors.     

毛细管区带电泳法同时测定饮料中16种食品添加剂

建立了毛细管区带电泳法测定饮料中酸性红92、专利蓝V、荧光素二钠、酸性红1、靛蓝胭脂红、亮黑、丽春红6R、日落黄、苋菜红、柠檬黄等10种人工合成色素和苯甲酸、山梨酸、对羟基苯甲酸甲酯、对羟基苯甲酸乙酯、对羟基苯甲酸丙酯、对羟基苯甲酸丁酯等6种防腐剂的分析方法。考察了缓冲溶液种类、浓度、pH值及运行电压、温度等对分离的影响,确定最佳电泳条件为: 未涂层弹性石英毛细管柱(46 cm×50 μm),缓冲溶液为70 mmol/L硼酸(pH=9.5)(含体积分数为4%的乙腈),检测波长220 nm,电泳电压30 kV,进样时间5 s,电泳温度25 ℃。该法用于测定市售饮料样品得到满意结果: 在1～250 mg/L范围内线性关系良好,相关系数不小于0.9938,回收率在95.8%与108.7%之间。该法简便、准确,能够满足食品添加剂的常规检测要求。     

Capillary zone electrophoresis for determination of carbohydrate-deficient transferrin in human serum

Carbohydrate-deficient transferrin (CDT) is the most specific marker for diagnosis of chronic excessive alcohol consumption and includes the serum transferrin (Tf) isoforms with two or less sialic acid residues (di-, mono-, and asialo-Tf). To monitor serum CDT, we developed a capillary zone electrophoresis (CZE) method based on the dynamic capillary coating with diethylenetriamine (DETA). The separation was performed in a bare fused-silica capillary (50 microm ID, 57 cm in length), applying a voltage of 25 kV and a temperature of 40 degrees C. Using a 100 mmol/L borate buffer, pH 8.4 with 3 mmol/L DETA, the Tf isoforms (asialo- to pentasialo-Tf) were resolved within 16 min. Enzymatic cleavage of sialic acid residues with neuraminidase and immunosubtraction were used to identify CDT isoforms. The relative amount of CDT expressed as area % of disialo-Tf isoform related to the area of tetrasialo-Tf in 50 healthy donors (24 males and 26 females; aged 25-50 years) was 3.15 +/- 0.76% (mean +/- SD). The comparison between CDT values obtained by this CZE procedure and the "Axis-Shield %CDT" kit gave r = 0.644, p < 0.001 (n = 290). This easy to use and inexpensive CZE procedure could be an ideal tool to investigate CDT proteins for clinical or forensic purposes.