Electrochemical Determination of Oxalate at Pyrolytic Graphite Electrodes

The electrocatalytic oxidation of oxalate at several carbon based electrodes including basal plane (BPPG) and edge plane (EPPG) pyrolytic graphite and glassy carbon (GC) electrode, was studied. The electrodes were examined for the sensing of oxalate ions in aqueous solutions and all three electrodes showed a response to oxalate additions. The peak of oxalate oxidation at BPPG electrode appeared at lower potential, +1.13 V vs. SCE, than at EPPG (+1.20 V vs. SCE) and GC electrode (+1.44 V vs. SCE). Oxalate oxidation at BPPG electrode was studied in more details for response characteristics (potential and current), effects of pH, temporal characteristics of response potential and current. The results indicated that oxalate oxidation proceeds as two‐electron process at the BPPG electrode with a transfer coefficient β and a diffusion coefficient D evaluated to be 0.45 and 1.03 (±0.04)×10^?5 cm² s^?1 respectively. The BPPG electrode was found to be suitable for oxalate determination in aqueous media showing linear response to oxalate concentration with a sensitivity of 0.039 AM^?1 and a limit of detection of 0.7 μM.     

Electrochemical Investigations of the Anticancer Drug Idarubicin Using Multiwalled Carbon Nanotubes Modified Glassy Carbon and Pyrolytic Graphite Electrodes

The effect of surface modifications on the electrochemical behavior of the anticancer drug idarubicin was studied at multiwalled carbon nanotubes modified glassy carbon and edge plane pyrolytic graphite electrodes. The surface morphology of the modified electrodes was characterized by scanning electron microscopy. The modified electrodes were constructed for the determination of idarubicin using adsorptive stripping differential pulse voltammetry. The experimental parameters such as supporting electrolyte, pH, accumulation time and potential, amount of carbon nanotubes for the sensitive assay of idarubicin were studied as details. Under the optimized conditions, idarubicin gave a linear response in the range 9.36×10^?8–1.87×10^?6 M for modified glassy carbon and 9.36×10^?8–9.36×10^?7 M for modified edge plane pyrolytic graphite electrodes. The detection limits were found as 1.87×10^?8 M and 3.75×10^?8 M based on modified glassy carbon and edge plane pyrolytic graphite electrodes, respectively. Interfering species such as ascorbic acid, dopamine, and aspirin showed no interference with the selective determination of idarubicin. The analyzing method was fully validated and successfully applied for the determination of idarubicin in its pharmaceutical dosage form. The possible oxidation mechanism of idarubicin was also discussed. The results revealed that the modified electrodes showed an obvious electrocatalytic activity toward the oxidation of idarubicin by a remarkable enhancement in the current response compared with bare electrodes.     

Direct Oxidation of Ascorbic Acid at an Edge Plane Pyrolytic Graphite Electrode: A Comparison of the Electroanalytical Response with Other Carbon Electrodes

The direct electrochemical oxidation of ascorbic acid at an edge plane pyrolytic graphite electrode (EPPG) is investigated and compared with other common carbon‐based electrodes, specifically glassy carbon, boron doped diamond and basal plane pyrolytic graphite. It is found that the EPPG electrode shows a significantly higher degree of electrochemical reversibility than the other electrode substrates giving rise to an analytically optimized limit of detection and sensitivity of 7.1×10^?5 M and 0.065 A M^?1 respectively.     

Electrochemical Determination of Cinnamtannin B1 with a Pyrolytic Graphite Electrode

Cinnamtannin B1 (trimeric proanthocyanidin), which is identified and isolated from the effective fraction of the root of Lindera aggregata (Sims) Kosterm, is one kind of condensed tannin used as an effective antipyrotic and antitumor agent. Its electrochemical response can be obtained at a pyrolytic graphite electrode. Consequently, an easily performed and sensitive method for the determination of cinnamtannin B1 is developed. The detection limit is estimated to be 1.0×10^–7M with the linear determination range of 2.0×10^–7M to 1.8×10^–6M. Five replicate analyses of 1.0×10^–6M cinnamtannin B1 yields an RSD value of 2.1%. Since the working electrode does not need to be modified with any other species, it is very stable, repeatable and easily treated, and this method therefore potentially useful in real sample analysis.     

锂在高有序热解石墨(HOPG)电极中的扩散系数

用循环伏安、交流阻抗和电位阶跃法研究了平板高有序热解石墨(HOPG)电极在1mol/LLiPF₆和体积比为1∶1的EC/DMC溶液中的电化学行为.结果表明,石墨的嵌锂反应仅发生在边界面上.随着嵌锂量的增加,表面SEI膜的电阻和嵌入反应的极化电阻减小.用交流阻抗谱和电位阶跃方法测定的锂在高有序热解石墨中的扩散系数一致,并随充电程度的增加而显著减小.在电极电位(vs.Li/Li⁺) 0.2～0.05V区间,扩散系数由10^-11cm²/s下降到10^-12cm²/s.     

Simultaneous Determination of Uric Acid and Ascorbic Acid Using Edge Plane Pyrolytic Graphite Electrodes

Edge plane pyrolytic graphite electrodes have been applied for the determination of uric acid and ascorbic acid. The separate determination of uric acid was found to produce three linear ranges from 100 nM to 3400 μM with a detection limit of 30 nM found to be possible. Uric acid detection was also explored in the presence of 200 μM ascorbic acid where a detection limit of 52 nM was found to be possible. The detection of ascorbic acid in the presence of uric acid was also explored over three linear ranges of ascorbic acid with a limit of detection of 80 nM. Last the simultaneous determination of both uric acid and ascorbic acid is investigated over the range 100 nM to 1000 μM where detection limits of 50 nM and 120 nM were obtained respectively. Analysis of uric acid in a growth tissue medium was found to be successful, confirming the applicability of the methodology to real matrices. This protocol is shown to provide low detection limits, easy handling (no electrode modification), good voltammetric peak separation of uric acid and ascorbic acid and a wide linear dynamic range.     

Edge Plane Pyrolytic Graphite Electrodes for Stripping Voltammetry: a Comparison with Other Carbon Based Electrodes

The first examples of using edge plane pyrolytic graphite electrodes for anodic and cathodic stripping voltammetry (ASV and CSV) are presented, notably the ASV of silver and the CSV of manganese. In the former example, detection limits for silver (based on 3σ) of 8.1 nM and 0.185 nM for 120 s and 300 s accumulation time, respectively, were achievable using the edge plane electrode, which were superior to those observed on glassy carbon, basal plane pyrolytic graphite and boron‐doped diamond electrodes. In the second example, a detection limit for manganese of 0.3 μM was possible which was comparable with that achievable with a boron‐doped diamond electrode but with an increased sensitivity. Comparison of the edge plane pyrolytic graphite electrode with boron‐doped diamond electrodes reveals that the edge plane electrode has comparable detection limits and sensitivities whilst exhibiting a lower signal‐to‐noise ratio and large potential window for use in trace analysis suggesting boron‐doped diamond can be conveniently replaced by edge plane pyrolytic graphite as an electrode material in many applications.     

Ex situ Voltammetry and Chronopotentiometry of Doxorubicin at a Pyrolytic Graphite Electrode: Redox and Catalytic Properties and Analytical Applications

Ex situ (adsorptive transfer stripping) electrochemical techniques in connection with basal‐plane PGE have been applied to the study of redox and catalytic properties of doxorubicin (DOX). Cyclic and square‐wave voltammetry and constant current chronopotentiometric stripping (CPS) analysis were used to follow reversible reduction of DOX quinone moiety around ?0.5 V and its coupling to catalytic oxygen reduction. CPS was for the first time used for sensitive ex situ determination of the DOX using the catalytic signal around ?0.5 V in the presence of oxygen, allowing detection of femtomole amounts of DOX. We show that specific interaction of DOX with double‐stranded DNA can easily be monitored using the catalytic CPS signal.     

Determination of Sb(V) Using Differential Pulse Anodic Stripping Voltammetry at an Unmodified Edge Plane Pyrolytic Graphite Electrode

Antimony(V) determination at an unmodified edge plane pyrolytic graphite (EPPG) electrode using anodic stripping voltammetry (ASV) by depositing beyond the hydrogen wave is shown in this paper. By depositing beyond the hydrogen wave, we report a sensitive method to determine pentavalent antimony at a carbon electrode in 0.25 M HCl. Using differential pulse anodic stripping voltammetry (DPASV), a bare EPPG electrode gave a detection limit of 5.8±0.02 nM without the need for surface modification. This level is greatly within the EU limit for drinking water of 40 nM.     

Electroanalysis of the Anthelmintic Drug Bithionol at Edge Plane Pyrolytic Graphite Electrode

An electrochemical study of the anthelmintic drug bithionol using edge plane pyrolytic graphite electrode (EPPGE) is presented for the first time by applying different electrochemical techniques, such as cyclic voltammetry (CV), square‐wave voltammetry (SWV), square‐wave adsorptive stripping voltammetry (SWAdSV), and alternating current (AC) impedance spectroscopy. Mechanistic aspects of the electrode reaction were studied implying a quasireversible electrode reaction from an adsorbed state of the reactant, coupled with a follow‐up chemical reaction to a final electroinactive product. The overall mechanism appears totally irreversible under conditions of CV at moderate scan rate, while being quasireversible under conditions of the fast SWV. Furthermore, an optimisation of the analytical procedure for quantitative determination of bithionol was conducted by applying SWV in an adsorptive stripping mode. The calibration curve was constructed in the concentration range of 0.1–1.0 μmol L^?1 (R²=0.9984) with a sensitivity of 3.6 μA L μmol^?1 and LOD of 26.7 nmol L^?1. The simple and sensitive SWAdSV procedure was proved to be suitable for the analysis of spiked urine samples.     

Oxidation of Protopine at a Pyrolytic Graphite Electrode Using Cyclic and Square‐Wave Voltammetry

This paper describes oxidation of the isoquinoline alkaloid, protopine (PR) at a pyrolytic graphite electrode (PGE) using cyclic and square‐wave voltammetry. In the alkaline range (pH 7.5–10.5) of a Britton–Robinson (B–R) buffer, a PR oxidation can be observed as a well‐developed voltammetric peak around +0.9 V (vs. Ag|AgCl|3 M KCl). With increasing pH of the B–R buffer, the PR peak is shifted to less positive potentials. The acquired voltammetric data suggest that PR strongly adsorbs onto the surface of the pyrolytic graphite where it is subjected to irreversible electrochemical oxidation in its uncharged free (tricyclic) base form. The results are discussed in connection with the electrochemical oxidation of other isoquinoline alkaloids and the potential applications of these data.     

蜡浸石墨碳电极伏安法测定维生素B6的研究

本文以表面直径3mm的蜡浸石墨碳为工作电极,在0.3mol/L NH_3·H_2O-NH_4Cl基底溶液中,用单扫描示波极谱仪制作VB_6的阳极化二阶导数极谱曲线,其峰电位Ep为+0.65V(vs SCE)。在1～70μg/ml范围内,峰幅高ip与浓度间呈线性关系。方法应用于药剂分析中,误差在±5％以内。     

Electrochemical Characterization of a Pyrolytic Carbon Film Electrode and the Effect of Anodization

A pyrolytic carbon (PC) film electrode was fabricated by the chemical vapor deposition (CVD) method. This report deals with the preparation, characterization and electrochemical behavior of this carbon film. Cyclic voltammetry, linear sweep voltammetry, Raman spectroscopy and scanning electron microscopy were employed to characterize the electrode. Low background current and capacitance were observed and the rate of charge transfer for Fe(CN) redox couple was determined via cyclic voltammetry. Also the effect of the anodic activation on the electrochemical activity was evaluated and characterized with respect to the sequence of voltage applied to the electrode. The excellent electrochemical activity and low background current are the reasons why this electrode is attractive for electroanalysis measurements with lower detection limit.     

Electrochemical Determination of Epinephrine with a Pyrolytic Graphite Electrode in the Presence of Ascorbic Acid and Dopamine

Epinephrine (EP) is one of the most important neurotransmitters in mammalian central nervous systems, existing in the nervous tissue and body fluid in the form of large organic cations, and controlling the nervous system in the series of biological perfor…     

Electrochemical Determination of Homocysteine at Disposable Graphite Electrodes

In the case of disruption of Hcy metabolism, the blood level of Hcy increases and it causes particularly the cardiovascular diseases, cancer, dementia and Parkinson’s disease. Thus, the sensitive analysis of Hcy levels in biological fluids is very important. Hcy analysis was performed herein using very practical and cost‐effective protocol using differential pulse voltammetry and graphite electrode. Detection limit of Hcy was found to be 1.21 µM in the linear range from 2 µM to 20 µM. The electrochemical Hcy detection in artificial urine medium was also successfully performed even in the presence of L ‐Cysteine, L ‐Methionine and Glutathione.     

Enhanced Performance of Edge‐Plane Pyrolytic Graphite (EPPG) Electrodes over Glassy Carbon (GC) Electrodes in the Presence of Surfactants: Application to the Stripping Voltammetry of Copper

The voltammetric performance of glassy carbon (GC) and edge‐plane pyrolytic graphite (EPPG) electrodes was investigated for the oxidation of potassium ferrocyanide in aqueous solution both with and without the addition of surfactant (sodium dodecyl sulfate and Triton X‐100). The heterogeneous electron transfer kinetics were determined for all cases, and it was found that the GC electrode surface was far more sensitive to the presence of surfactant than the more hydrophilic EPPG surface. This result was then applied to the electroanalysis of copper via adsorptive stripping voltammetry in the presence of Triton X‐100 and it was observed that the EPPG electrode response was unaffected by up to 100 μM of surfactant, whilst the voltammetry on the GC electrode was significantly affected by only 10 μM.     

Simultaneous,Selective and Highly Sensitive Voltammetric Determination of Lead,Cadmium, and Zinc via Modified Pencil Graphite Electrodes

Pencil graphite electrode (PGE) modified with MWCNT and Bi³⁺ (MWCNT/Bi/PGE) was utilized in simultaneous analysis of Pb²⁺, Cd²⁺, and Zn²⁺. Surface and electrochemical characteristics of MWCNT/Bi/PGE were investigated via SEM, cyclic voltammetry, electrochemical impedance spectroscopy, and FTIR measurements. Even though modification with MWCNT did not improve the electroactive surface area, it significantly decreased the charge transfer resistance. Furthermore, modification with Bi³⁺ significantly increased the sensitivity. Finally, MWCNT/Bi/PGE exhibited the highest sensitivity and reproducibility compared to PGE and PGE modified with only MWCNT. MWCNT/Bi/PGE provided LOD values of 0.27, 0.43, and 1.63 μg L⁻¹, and linear ranges of 1–80, 5–80, and 10–80 μg L⁻¹ for Pb²⁺, Cd²⁺, and Zn²⁺, respectively. Proposed modification method offers effective electroanalytical performance with low time consumption and cost for the analyst.     

石墨炉原子吸收法中热解涂层石墨管在无标准分析法测定环境样品中铬的应用

本文探讨了热解涂层石墨管测定铬的最佳实验条件,研究了各种酸和干扰物质的基体效应,提出用浓氨水为基体改进剂克服高氯酸的干扰。比较了各原子化温度时的理论和实验特征量。使热解涂层石墨管有可能用于无标准分析法测定各种环境样品中的铬。     

Electrochemistry of Levo‐Thyroxin on Edge‐Plane Pyrolytic Graphite Electrode: Application to Sensitive Analytical Determinations

The electrochemical response of sodium levo‐thyroxin (T₄) at the surface of an edge plane pyrolytic graphite (EPPG) electrode is investigated using cyclic voltammetric technique in the presence of 0.1 M HCl as supporting electrolyte. T₄ underwent totally irreversible oxidation at this system and a well‐defined peak at 821 mV was obtained. Compared to the signals obtained in the optimized conditions at bare glassy carbon and carbon paste electrodes, the oxidation current of T₄ at an EPPG electrode was greatly enhanced. The electrochemical process of T₄ was explored and the experimental conditions were optimized. The oxidation peak current represented a linear dependence on T₄ concentration from 0.01 to 10 µM. The detection limit of 3 nM (S/N=3) was obtained for 250 s accumulation at 0.3 V. Determination of T₄ in a synthetic serum sample demonstrated that this sensor has good selectivity and high sensitivity.     

A Facile and Cost‐effective Electroanalytical Strategy for the Quantification of Deoxyguanosine and Deoxyadenosine in Oligonucleotides Using Screen‐printed Graphite Electrodes

The development of electroanalytical methods for the detection and quantification of nucleotides in DNA offers vital implications in assessing the degree of oxidation or epigenetic modification in DNA. Unfortunately, the electrochemical response of oligonucleotides is strongly influenced by the size, composition and nucleic base sequence. In this article, an optimized analytical procedure for the enzymatically breakdown of the oligonucleotides to their corresponding nucleotides for the evaluation of the electrochemical response through the use of square wave voltammetry (SWV) is presented. Enzymatic digestion of oligonucleotides has been optimized in terms of buffer composition, digestion time, strategy for stopping the enzymatic reaction and filtration requirement for enzyme removal, and then compared to an established protocol. Under the optimized protocol SWV response of a number of untreated and enzymatically digested six‐mer oligonucleotides, namely 5′‐GGGGGG‐3′, 5′‐AAAAAA‐3′, 5′‐CGCGCG‐3′ and 5′‐AAACGC‐3′ have been analysed, providing a higher sensitivity for the determination of guanosine and adenosine monophosphate species under digestion conditions with a more facile and cost effective procedure. The novel strategy for the enzymatically treated oligonucleotides in combination with the SWV response provides a proof of principle for feasible applications in the diagnosis of methylated guanosine in DNA as a potential biomarker due to its relation with cancer.