Electrical conductivity study on micelle formation of long-chain imidazolium ionic liquids in aqueous solution

Electrical conductivity was measured for aqueous solutions of long-chain imidazolium ionic liquids (IL), 1-alkyl-3-methylimidazolium bromides with C(12)-C(16) alkyl chains. The break points appeared in specific conductivity (kappa) vs concentration (c) plot indicates that the molecular aggregates, i.e., micelles, are formed in aqueous solutions of these IL species. The critical micelle concentration (cmc) determined from the kappa vs c plot is somewhat lower than those for typical cationic surfactants, alkyltrimethylammonium bromides with the same hydrocarbon chain length. The electrical conductivity data were analyzed according to the mixed electrolyte model of micellar solution, and the aggregation number, n, and the degree of counter ion binding, beta, were estimated. The n values of the present ILs are somewhat smaller than those reported for alkyltrimethylammonium bromides, which may be attributed to bulkiness of the cationic head group of the IL species. The thermodynamic parameters for micelle formation of the present ILs were estimated using the values of cmc and beta as a function of temperature. The contribution of entropy term to the micelle formation is superior to that of enthalpy term below about 30 degrees C, and it becomes opposite at higher temperature. This coincides with the picture drawn for the micelle formation of conventional ionic surfactants.     

Micelle formation of N-(1,1-dihydroperfluorooctyl)- and N-(1,1-dihydroperfluorononyl)-N,N,N-trimethylammonium chlorides

Micelle formation of N-(1,1-dihydroperfluorooctyl)-N,N,N- and N-(1,1-dihydroperfluorononyl)-N,N,N-trimethylammonium chloride was investigated by analyzing the concentration dependence of the electric conductivity and of the activity of the counterion (Cl(-)) of the solution. The three micellization parameters for ionic surfactants, the micellization constant K(n), the micelle aggregation number n, and the number of counterions per micelle m, were determined by combination of electric conductivity and counterion concentration. The present analysis employed two slopes of the plots of specific conductivity against surfactant concentration below and above the critical micelle concentration and the mass action model of micelle formation. The aggregation numbers thus obtained were relatively small, while the degrees of counterion binding to the micelle (m/n) were found to be quite large, much larger than expected from the small aggregation numbers. Thermodynamical parameters of the micellization were evaluated from the temperature dependence of the three parameters, and the micellization of the fluorinated surfactant was found to be enthalpy-driven. A CF(2) group in the perfluorocarbon chain was found to be 1.44 times larger in hydrophobicity for micellization than a CH(2) group in the hydrocarbon chain.     

Synthesis and characterization of carbon nanotubes covalently functionalized with amphiphilic polymer coated superparamagnetic nanocrystals

The kinetic investigations of oxidation of tris(1,10-phenanthroline)iron(II) by oxone have been studied spectrophotometrically in phosphate buffer medium of pH 6.8, temperature 308 K, and ionic strength 0.25 mol L(-1). The reactions were also carried out in presence of globular transport protein, bovine serum albumin (BSA) having isoelectric point 4.9, anionic surfactant sodium dodecyl sulfate (SDS), and their mixtures. The critical aggregation concentration (CAC) and critical micelle concentration (CMC) of SDS in presence of BSA have been determined using conductivity and kinetic measurement techniques. The secondary structure of BSA was examined by Circular Dichroism (CD) measurement at 308 K. The helix nature of BSA decreases with increase of SDS concentration. The effect of pH on rate in presence of BSA is opposite to its absence, and the effect of urea on rate in presence of BSA indicates the denaturation of BSA. The results depict that amphiphile SDS interacts with BSA and different molecular events, for example, specific binding, cooperative binding, protein unfolding, and micelle formation act. Activation parameters of the reaction in different environments have been determined.     

Modulation of aggregation behavior of amphiphilic drug AMT under the influence of polymer molecular weight and composition

The purpose of this study was to determine the aggregation behavior of amphiphilic drug amitriptyline hydrochloride (AMT) and to search for means which boost/suppress the aggregation behavior. Polyethylene glycols (PEGs) nonionic polymers (which are used as pharmaceutical excipients) of varying molecular weights from 400 to 35,000 were tested. To know their effect on the micellization and interfacial behavior of the drug, the critical micelle concentration (CMC) and critical aggregation concentration (CAC) were determined in presence of various polymers by tensiometric and conductivity methods. The CAC values were found to decrease while the CMC values increased with increase in the polymer concentration. The thermodynamic parameters were evaluated where ΔG°(mic) and ΔG°(agg) are found to be negative, confirming the feasibility of interaction between AMT and polymers.     

An Assessment of the Aggregation and Adsorption Behavior of the Sodium Dodecylsulfate–Cetyltrimethylammonium Bromide Mixed Surfactant System in Aqueous Medium

Sodium dodecylsulfate and cetyltrimethylammonium bromide mixtures are important catanionic systems, as they have an inherent tendency to form vesicle structures. Despite extensive studies on the phase behavior and microstructures, there is dearth of basic information on the aggregation and adsorption behavior of this mixed system. In this work the critical micelle concentration, surface tension reduction effectiveness, surface excess, mixed micelle and monolayer compositions, activity coefficients, interaction parameters, counterion binding and Gibbs energy terms of this mixed system are determined by measuring its surface tension and conductance as a function of composition. The dependence of mixed micelle composition on surfactant concentration has been successfully demonstrated.     

Conductivities, volumes, fluorescence, and aggregation behavior of ionic liquids [C4mim][BF4] and [C(n)mim]Br (n = 4, 6, 8, 10, 12) in aqueous solutions

Densities, conductivities, and polarity indexes of pyrene for aqueous solutions of a series of ionic liquids [C(n)mim]Br (n = 4, 6, 8, 10, 12) and [C4mim][BF4] have been determined at 298.15 K as a function of ionic liquid concentrations. It was shown that possible aggregation appeared for the ionic liquids in aqueous solutions except for [C4mim]Br. The critical aggregation concentration (CAC) of the ionic liquids, the ionization degree of aggregates (beta), the standard Gibbs energy of aggregation (Delta G(m)(o)), the limiting molar conductivity (Lambda(m)(o)), and the standard partial molar volume (V(m)(o)) for the ionic liquids were derived from the experimental data. The dependence of the CAC, Delta G(m)(o), Lambda(m)(o), and V(m)(o) on the length of the alkyl chain of the cations was examined. It was further suggested from volumetric data that a micelle was formed for [C8mim]Br, [C10mim]Br, and [C12mim]Br in aqueous solutions. Their apparent molar volumes at the critical micelle concentration (V Phi,CMC), apparent molar volumes in the micelle phase (V(Phi)(mic)), and the change of their apparent molar volume upon micellization (Delta V Phi,m) were calculated by application of the pseudophase model of micellization. In addition, the average aggregation number of [C(n)mim]Br (n = 8, 10, 12) has been determined by the steady-state fluorescence quenching technique, and predicted from a simple geometrical mode. It is found that the experimental values are in good agreement with the predicted ones.     

反离子对离子液体氯化1-(2-羟乙基)-3-十二烷基咪唑在水溶液中自组装的影响

用表面张力法和荧光探针技术分别测定了阳离子型离子液体表面活性剂氯化1-(2-羟乙基)-3-十二烷基咪唑([C2OHC12im]Cl)在无机盐(NaX,X=Cl-,Br-,I-和Na2SO4)水溶液中的自组装参数。 结果表明,反离子通过结合[C2OHC12im]+并中和其表面电荷,使[C2OHC12im]+的临界胶束浓度(CMC)和胶束平均聚集数(Nm)等自组装参数明显改变;改变幅度按照Cl-＜Br-＜I-＜SO2-4次序递增;但是反离子(Cl-、Br-和SO2-4)种类对临界胶束平均聚集数(Nm,c)和胶束微极性([I1/I3]m)的影响不甚明显;随着Br-浓度增加,lg CMC线性减小,而Nm则以幂函数形式递增。     

Micellar parameters of diblock copolymers and their interactions with ionic surfactants

The interactions of non-ionic amphiphilic diblock copolymer poly（oxyethylene/oxybutylene）(E₃₉B₁₈) with anionic surfactant sodium dodecyl sulphate（SDS） and cationic surfactant hexadecyltrimethylammonium bromide（CTAB） were studied by using various techniques such as surface tension,conductivity,steady-state fluorescence and dynamic light scattering.Surface tension measurements were used to determine the critical micelle concentration（CMC） and thereby the free energy of micellization(△G_mic),free energy of adsorption(△G_ads),surface excess concentration（Γ） and minimum area per molecule（A）.Conductivity measurements were used to determine the critical micelle concentration（CMC）,critical aggregation concentration（CAC）,polymer saturation point（PSP）,degree of ionization（α） and counter ion binding（β）. Dynamic light scattering experiments were performed to check the changes in physiochemical properties of the block copolymer micelles taken place due to the interactions of diblock copolymers with ionic surfactants.The ratio of the first and third vibronic peaks（I₁/I₃） indicated the polarity of the pyrene micro environment and was used for the detection of micelle as well as polymer-surfactant interactions.Aggregation number（N）,number of binding sites（n） and free energy of binding （△G_b） for pure surfactants as well as for polymer-surfactant mixed micellar systems were determined by the fluorescence quenching method.     

电解质和乙醇对DNA与Gemini表面活性剂相互作用的影响

应用荧光探针和zeta电位方法研究了电解质NaBr、NaCl、KCl和有机溶剂乙醇对DNA与Gemini表面活性剂相互作用的影响. DNA诱导的表面活性剂类胶束在较低浓度即可生成, 这一浓度称为临界聚集浓度(CAC). Gemini表面活性剂比具有相同烷烃链长的单体表面活性剂更易聚集, 对应的CAC较低. 实验结果表明, 盐(NaBr)浓度对DNA/表面活性剂体系的CAC影响不大, 阴、阳离子的种类则对该体系有不同程度的影响. 阴离子(Br-、Cl-)对体系的CAC有显著的影响, 但阳离子(Na+、K+)的差异对CAC影响不大. 极性溶剂乙醇对DNA与表面活性剂相互作用的影响比较复杂. 乙醇浓度较低时有利于表面活性剂的聚集, 使得CAC减小; 而浓度较高时, 则不利于表面活性剂聚集,从而使CAC变大. 乙醇可显著改变DNA/表面活性剂复合物的zeta电位.     

Co‐ and Counterion Effect on the Micellization Characteristics of Dodecylpyridinium Chloride

Micellization parameters, critical micelle concentration (cmc), degree of counterion dissociation (α), aggregation number (n), critical packing parameter, and hydrophobic core volume of Dodecylpyridinium chloride (DPC) micelles were determined in presence of varying concentrations of sodium chloride (NaCl), sodium acetate (SAc), sodium propionate (SPr), ethylammonium chloride (EACl), diethylammonium chloride (DEACl), tetraethylammonium chloride (TEACl), and propylammonium chloride (PACl) through conductometric investigations at 298.15 K. The resulting data suggests that both counter and coions affect the cmc values‐cmc depressing tendency of the salts varies in order PACl≈NaCl>EACl>DEACl>TEACl>SPr>SAc, while the degree of counterion dissociation is dependent on the nature and concentration range of the added salt. Increasing salt concentration increases the relative hydrophobic volume of the micelles and coion has not much effect on aggregation number.     

Aggregation Number of Ionic Surfactants and its Application for Alkyltrimethyl Ammonium Bromides and Sodium Tetradecyl Sulfate by Potentiometric Technique

A potentiometric technique based on surfactant ion selective electrode has been used for various cationic and anionic surfactants. The data obtained contain m ₁ (surfactant monomer concentration); m ₂ (free counterion concentration) and α (degree of dissociation of micelle) were used for determination of aggregation number at and above cmc (critical micelle concentration). Data fitting show a relationship between aggregation number with such parameters. The correlation equation obtained shows that size of ionic micelle vary sharply after cmc. Also, the equation obtained shows size of micelle growth with increase in counterion concentration.     

Effect of counterion geometry on cationic micelles

The critical micelle concentration, aggregation number, and binding properties of decyltrimethylammonium ion micelles are determined as a function of counterion geometry using the dianions of phthalic, isophthalic, and terephthalic acids. Light-scattering methods were used to secure the CMC and AN data whereas binding data were obtained with a specific ion electrode. It is shown that the differences among the micellar parameters are quite small relative to counterion effects induced by variations in polarizability and hydrophobicity. The data are used as evidence for a disorganized micelle surface containing water-filled grooves and fatty patches which do not discriminate among various geometric dispositions of the carboxylates about the aromatic ring.     

Surfactant polymer interactions between strongly interacting cationic surfactants and anionic polyelectrolytes from conductivity and turbidity measurements

The interactions between oppositely charged surfactant/polymer mixtures have been studied using conductivity and turbidity measurements. The dependence of aggregation phenomenon on the chain length and head group modifications of conventional cationic surfactants, i.e., hexadecyl- (HTAB), tetradecyl- (TTAB), and dodecyltrimethylammonium bromides (DTAB) and dimeric cationic surfactants, i.e., decyl- (DeDGB) and dodecyldimethylgemini bromides (DDGB), is investigated. It was observed that cationic surfactants induce cooperative binding with anionic polyelectrolytes at critical aggregation concentration (cac). The cac values are considerably lower than the critical micelle concentration (cmc) values for the same surfactant. After the complete complexation, free micelles are formed at the apparent critical micelle concentration (acmc), which is slightly higher in aqueous polyelectrolyte than in pure water. Among the conventional and dimeric cationic surfactants, DTAB and DeDGB, respectively, have been found to have least interactions with oppositely charged polyelectrolytes.     

表面活性剂与高分子链混合体系的模拟

计算机模拟了高分子链对表面活性剂胶束形成过程的影响，以及高分子链构象性质随胶束化过程的变化.结果表明,当高分子链与表面活性剂之间的相互作用强度超过临界值后，高分子链的存在有利于表面活性剂胶束的形成.临界聚集浓度（CAC）与临界胶束浓度（CMC）的比值CAC/CMC随高分子链长的增大和相互吸引作用的增强而减小.在CAC之前，高分子链与表面活性剂分子只有动态的聚集；但在CAC之后，表面活性剂胶束随表面活性剂浓度X的增加而增大，并静态地吸附在高分子链上，形成表面活性剂/高分子聚集体.随着表面活性剂分子的加入，高分子链的均方末端距和平均非球形因子先保持恒定；从X略小于CAC开始， 和快速减小，至极小值后又逐渐增大.模拟结果支持高分子链包裹在胶束表面的实验模型.     

萃取过程的量热研究(Ⅳ)——皂化P507萃取有机相中反向胶束和微乳状液的形成

利用量热滴定法研究皂化P507萃取有机相中反向胶束的形成和滴水过程中微乳状液的形成.求得临界胶束浓度、胶束形成常数K、聚集数n以及热力学函数,并用激光动态光散射仪测定胶团和微乳颗粒的流体力学半径。     

Aggregation and micellization of sodium dodecyl sulfate in the presence of Ce(III) at different temperatures: a conductometric study

Aggregation properties of sodium dodecyl sulfate (SDS) in the presence of cerium(III) chloride, at various temperatures (298.15-323.15 K) have been measured by the electrical conductance technique. The experimental data on aqueous solutions as a function of SDS concentration show the presence of two inflexion points indicating the presence of two distinct interaction mechanisms: the first, occurring at SDS concentrations below the critical micelle concentration of the pure surfactant, which can be explained by the formation of aggregates between dodecyl sulfate (DS-) and Ce(III), while the second one, at SDS concentrations around the critical micelle concentration (cmc) of the pure surfactant which is due to the SDS micellization. The aggregation between DS- and Ce(III) was confirmed by static light scattering. The binding ratio of DS-/Ce(III) changes from 6 to 4, shows a slight dependence on the Ce(III) concentration and is independent of the temperature. The thermodynamic micellization parameters, Gibbs energy, enthalpy and entropy of micellization were calculated on the basis of the experimental data for the aggregation concentration, and the degree of counterion dissociation of the micelles. The SDS micellization is energetically favoured by increasing either the concentration of CeCl3 or the temperature. Such behaviour is clearly dominated by a decrease of the micellization (exothermic) enthalpy. The entropy of micellization approaches zero as the cerium(III) chloride concentration and temperature increase.     

含酯基Gemini表面活性剂在有机醇-水体系中的胶束热力学及聚集行为

采用电导法研究了不同温度下含酯基Gemini表面活性剂在纯水和在质量分数为10%的甲醇-水(MAWR),乙二醇-水(EG-WR),丙三醇-水(GL-WR)四种体系中的集聚行为和胶束热力学;聚集行为参数包括临界胶束浓度(cmc)和抗衡离子的解离程度(α)以及胶束的热力学参数,包括标准吉布斯自由能(ΔG_m~o)、吉布斯迁移自由能(ΔG_(trans)~o)、吉布斯烷基链胶束化自由能(ΔG_(tail)~o)、标准焓变(ΔH_m~o)和标准熵变(ΔS_m~o),均被计算和讨论。研究表明在所有的研究体系中,cmc值随着疏水链的增加而减小,随着加入的醇结构中羟基数目的增加而增大,随温度的升高先变小,后变大呈U字形;胶束化过程都是自发进行的,并且在293.15 K下,胶束化过程是吸热的,在293.15 K上,胶束化过程是放热的;通过稳态荧光光谱法研究了表面活性剂在纯水、有机醇-水混合溶液中的微极性,结果表明,在相同溶剂中,随着烷基链长度的增加,溶液微环境的疏水性越强;对于相同的Gemini表面活性剂,随着加入含羟基数目越多的醇,其微环境的疏水性越强。并研究了Gemini表面活性剂在混合体系中形成胶束过程的焓-熵补偿曲线。     

Effects of additives on the aggregation of surfactants: binding domination

The effects of electrolytes, alcohols, and urea on the aggregation of SDS, CTAB, and TritonX-100 at 25℃ have been investigated by fluorescence probing of pyrene. Both electrolytes and alcoholsreduce the critical micelle concentration (CMC) of the ionic surfactants, while the effect of the former ismore pronounced. It is shown that the effects of electrolytes mainly depend on the concentrationsand especially the valence of the opposite charge ions, and only slightly depend on the same charge ionsin respect of ion aggregate of micelle. The logarithm of CMC is not linearly correlated with theconcentrations of the counter ion or the electrolytes. The results are rationalized in terms of Hartley'smodel. Propanol increases the CMC of TX-100, while electrolytes and urea do not. In all the threekinds of surfactant micelles the excitation spectrum of pyrene slightly red-shifts (ca. 4 nm) from thatin water, but is not affected by the additives. The micropolarity of the environment in which pyrenemolecule resides in SDS micelle decreases with the increase of the concentrations of electrolytes. Thisis not the case when alcohols and urea were added to SDS or to TX-100. It is suggested that theaddition of electrolytes would result in more orderly orientation of SDS molecules. It is the bindingstrength of the counter ions that dominates the effects of additives on the aggregation of surfactants.     

Self-assembly of tetradecyltrimethylammonium bromide in glycerol aqueous mixtures: A thermodynamic and structural study

In this paper, we have studied the effect of glycerol on the micelle formation of tetradecyltrimethylammonium bromide. Changes in both the critical micelle concentration and the degree of counterion binding of the surfactant upon the addition of glycerol across a temperature range (20-40 degrees C) were examined by using the conductance method. The equilibrium model of micelle formation was applied to obtain the thermodynamic parameters of micellization. An enthalpy-entropy compensation effect was observed in all the solvent systems, but whereas the micellization of the surfactant in the medium with 20% glycerol occurs under the same structural conditions as in pure water, in glycerol rich mixtures the results suggest that the lower aggregation in these media is due to the minor cohesive energy of the solvent system in relation to water. It was also observed that the micellar aggregation number, as obtained by the static quenching method, decreases with the glycerol content. This fact was attributed to an increase in the surface area per headgroup of the surfactant as a consequence of an enhanced solvation, probably induced by the incorporation of some glycerol molecules in the micellar solvation layer. Although the pyrene 1:3 ratio index does not indicate significant changes in the micropolarity at the micelle-bulk interface, the data of fluorescence anisotropy of coumarin 6 and fluorescein are compatible with the formation of a more compact solvation layer.