硅橡胶包覆十八烷/聚(St-MMA)储能微胶囊复合材料制备及热性能

以十八烷/聚(苯乙烯-甲基丙烯酸甲酯)(P(St-MMA))微胶囊为相变材料,硅橡胶作为载体,制备了十八烷/P(St-MMA)/硅橡胶复合材料。研究了微胶囊的加入方式及加入量,硅橡胶包覆方法。通过红外光谱(IR)和扫描电镜(SEM)研究复合材料的结构和形貌。通过力学性能测试如拉伸强度、扯断伸长率,确定最佳的加工方法。通过热重分析法(TG)、差示扫描量热法(DSC)和储热性能对复合材料的热性能进行研究。结果表明,十八烷制成微胶囊加入到硅橡胶中,且微胶囊加入量是2份时,十八烷/P(St-MMA)微胶囊/硅橡胶的热稳定性热稳定性及力学性能较好。室温硅橡胶包覆微胶囊掺混固化法制备的复合材料的力学性能优于直接共混后热固化法和混炼涂抹后热固化法。十八烷/P(MMA-St)/硅橡胶复合材料的焓值为67.6J/g,储能效果好。     

石墨烯/正十八烷微胶囊的制备与及其热性能研究

以石墨烯/正十八烷为芯材,三聚氰胺-尿素-甲醛树脂(MUF)为壁材,苯乙烯马来酸酐共聚物(SMA)为乳化剂,采用乳液聚合法制备相变微胶囊.系统研究了石墨烯对于正十八烷微胶囊性能的影响.采用场发射扫描电子显微镜(FE-SEM)、傅里叶变换红外光谱分析仪(FTIR)、拉曼光谱仪、X射线衍射仪(XRD)、Hot Disk热常数分析仪、示差扫描量热仪(DSC)和热重分析仪(TGA)对相变微胶囊的外貌形态、晶型结构和热性能进行表征和分析.结果表明,微胶囊呈圆球形且光滑,粒径约为1~30μm.当石墨烯添加量为0.1 g时,微胶囊的形貌无明显变化.当加入过量石墨烯时,微胶囊出现了明显的团聚现象.XRD测试表明,包覆于微胶囊中的石墨烯没有使微胶囊的结晶峰位置发生明显的偏移,这对于微胶囊的实际应用是有利的.微胶囊的相变热焓和包覆率随着石墨烯的加入而不断减小,但芯材的过冷现象得到了明显的改善.石墨烯对于微胶囊传热性能的提升有着显著的效果.当石墨烯的添加量为0.2 g时,微胶囊的导热系数为0.092 W·m-1·K-1,与纯微胶囊相比提高了约51%,这说明石墨烯改善了传统相变微胶囊的传热性能,提升了相变微胶囊的应用性能.     

基于热致变色微胶囊的科普实验方案

颜色是缤纷世界的重要组成部分,热致变色微胶囊的颜色随温度变化而变化,具有“可视、可玩、可教”的特点。本科普实验以热致变色微胶囊制备为切入点,从分子结构选择到微胶囊制备和表征,讲述热致变色现象中的化学原理,提高中学生对生活现象的观察力和探知力。本实验操作过程简单、实验现象贴近生活、实验原理易于推广,可以培养学生的基础操作能力,有利于提高学生从理论到实践的转换水平,提升科创探索的设计和动手能力。     

正十六烷聚脲微胶囊化相变材料

用界面聚合法，合成了直径大约2.5 μm可用于热能储存含相变材料的聚脲包覆微胶囊.在含乳化剂的水溶液中，将溶有芯材正十六烷的有机相乳化成微米级油性液滴，随后加入的水溶性单体二胺与甲苯2,4-二异氰酸酯在胶束界面相互反应形成囊壁.分别用乙烯二胺，1,6-己二胺和它们的混合物作为水溶性单体进行了研究.并用红外光谱和热分析分别考察了不同胺类对微胶囊化学结构和热性质的影响.红外谱图显示合成了聚脲微胶囊，热重曲线表明含正十六烷的聚脲微胶囊能够耐受大约300 ℃高温，差示扫描量热测试表明所有样品均具有合适的相转变热，冷热循环实验揭示微胶囊能够维持储热容量不衰减.研究表明微胶囊化的正十六烷作为相变储热材料具有良好的应用前景.     

辣素微胶囊的原位聚合法制备与热降解动力学

在乳液体系中,以尿醛为壁材,以原位聚合法制备了辣素同系物———N-香草基壬酰胺微胶囊。红外光谱证实了尿醛的形成,X-射线衍射显示了同样作为半晶高分子囊壁,尿醛包裹囊心前后出现的结构晶型差异。根据吸附等温曲线假设微胶囊为紧密堆积形式,对于尿醛单体颗粒和尿醛微胶囊的TGA,采用Achar-B rind ley-Sharp-W endworth方法,对两者进行热重数据的处理,以作图法求得了动力学参数,确定了热降解动力学模式函数,回归系数良好。TGA求解的活化能数据证明由于晶型差异,导致单体与微胶囊热稳定性不同,从而与XRD结论一致。     

脲醛树脂微胶囊的改性

为了提高脲醛树脂微胶囊的稳定性,选择化学结构不同的聚乙烯醇、苯酚、三聚氰胺对脲醛树脂进行了改性.通过优化反应条件,得到了具有良好耐热、耐水性的脲醛树脂微胶囊.采用光学显微镜观测了微胶囊的形貌;用FT-IR表征了微胶囊的化学结构;用TGA分析了微胶囊的热性能.研究结果表明:3种改性后的微胶囊的热稳定性均有所提高,其中苯酚改性的微胶囊热稳定性最好;聚乙烯醇改性微胶囊的疏水性下降,苯酚和三聚氰胺改性的微胶囊的疏水性都有所增强.     

丙烯酸共聚物囊壁的正十八烷微胶囊的制备和性能表征

以二丙烯酸1,4-丁二醇酯为交联剂, 成功制备了甲基丙烯酸甲酯-甲基丙烯酸共聚物为壁材, 正十八烷为囊芯的相变材料微胶囊. 采用扫描电子显微镜(SEM)、差示扫描量热仪(DSC)和热重分析仪(TG)分别考察了单体与芯材投料比、单体浓度和交联剂的含量对微胶囊形貌、相变热性能、热稳定性能的影响. 实验结果表明: 随着单体与芯材投料比或单体浓度的增加, 微胶囊表面均变得致密, 壁厚增加; 随着交联剂含量的增加, 微胶囊的表面变得更加致密光滑, 热稳定性显著增强; 随着单体与芯材投料比的增大, 微胶囊热焓值减小, 被包裹的囊芯含量减少.     

一种致密的相变储能微胶囊的制备与表征

制备了以聚脲为第一壁材、苯乙烯-二乙烯苯为第二壁材,以相变点在16℃左右的石蜡为芯材的相变储能微胶囊。采用红外光谱、差示扫描量热分析、热重分析测试技术表征了制备的相变储能微胶囊的结构组成以及热性能;采用溶剂淋洗法研究了影响包覆率的因素。结果表明,相变储热微胶囊是复合相变材料,微胶囊的热稳定性好,致密性优良;通过对水油比、乳化剂及苯乙烯-二乙烯苯用量等各因素对微胶囊包覆率影响的讨论,得出在水与油质量比3.2,乳化剂相对于水的质量分数为2%时,加入苯乙烯与二乙烯苯质量比为10∶1混合液的质量分数为6.0%时,其包覆率达81.14%;制备的微胶囊能耐较高温度,在150℃以下无质量损失,且微胶囊储热能力高达80J/g。同时发现,储热能力与芯壁比有关,比值越大储热潜能越高。     

十八烷@聚甲基丙烯酸甲酯微胶囊相变材料的制备及表征

采用乳液聚合法合成了Oct@PMMA微胶囊相变材料,以聚乙烯吡咯烷酮作为分散剂,季戊四醇四丙烯酸酯作为交联剂改善微胶囊储热性能与热稳定性;采用FT-IR、XRD、DSC和TG等技术对微胶囊的化学和物理性质进行了表征。结果表明,聚乙烯吡咯烷酮通过提高乳液液滴的稳定性和分散程度,提升了微胶囊的热力学性能及收率,相变焓值达到105.6 J/g,收率达到98.01%,季戊四醇四丙烯酸酯改善了微胶囊的热稳定性,热降解温度达到175℃。     

纳米二氧化硅改性石蜡微胶囊相变储能材料的研究

以石蜡为芯材,甲基丙烯酸甲酯-丙烯酸共聚物为壁材,纳米SiO2为改性剂,采用原位聚合法制备了石蜡微胶囊相变储能材料,系统研究了添加纳米SiO2对石蜡微胶囊相变材料性能的影响;采用傅里叶变换红外光谱(FTIR)、扫描电子显微镜(SEM)、示差扫描量热法(DSC)和热重分析(TGA)等对石蜡微胶囊相变材料的化学结构、表面形貌和热性能进行了表征.研究表明,纳米SiO2能够有效提高微胶囊壁材的热稳定性,当丙烯酸酯壁材中添加3％改性纳米SiO2时,微胶囊呈球形且表面光滑,尺寸250 ～ 300 nm,具有良好的储热能力,相变潜热高达134.79 J/g,分解温度比未添加改性纳米SiO2的石蜡微胶囊提高了40 K,经过1000次热循环测试,石蜡渗漏率仅2.96％.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.