Rhodium-Catalyzed Chemodivergent Regio- and Enantioselective Allylic Alkylation of Indoles

The control of C3/N1 chemoselectivity in indole alkylation with the same electrophiles is still challenging. An Rh/bisoxazolinephosphane-catalyzed chemodivergent regio- and enantioselective allylic alkylation of indoles was developed. Chiral C3- and N1-allylindoles can be selectively obtained with high branched/linear ratio and up to 99 % ee by changing the counteranion of Rh, the allylic carbonate, the reaction temperature, and the ligand.     

Toward Efficient Palladium‐Catalyzed Allylic C?H Alkylation

Recent breakthroughs have proved that direct palladium(II)‐catalyzed allylic C? H alkylation can be achieved. This new procedure shows that the inherent requirement for a leaving group in the Tsuji–Trost palladium‐catalyzed allylic alkylation can be lifted. These initial reports hold great promise for the development of allylic C? H alkylation into a widely applicable methodology, thus providing a means to enhance synthetic efficiency in these reactions.     

Enantioselective Pd‐Catalyzed Allylic Alkylation Reactions of Dihydropyrido[1,2‐a]indolone Substrates: Efficient Syntheses of (−)‐Goniomitine, (+)‐Aspidospermidine,and (−)‐Quebrachamine

The successful application of dihydropyrido[1,2‐a]indolone (DHPI) substrates in Pd‐catalyzed asymmetric allylic alkylation chemistry facilitates rapid access to multiple alkaloid frameworks in an enantioselective fashion. Strategic bromination at the indole C3 position greatly improved the allylic alkylation chemistry and enabled a highly efficient Negishi cross‐coupling downstream. The first catalytic enantioselective total synthesis of (−)‐goniomitine, along with divergent formal syntheses of (+)‐aspidospermidine and (−)‐quebrachamine, are reported herein.     

Enantioselective Pd‐Catalyzed Allylic Alkylation Reactions of Dihydropyrido[1,2‐a]indolone Substrates: Efficient Syntheses of (−)‐Goniomitine, (+)‐Aspidospermidine,and (−)‐Quebrachamine

The successful application of dihydropyrido[1,2‐a]indolone (DHPI) substrates in Pd‐catalyzed asymmetric allylic alkylation chemistry facilitates rapid access to multiple alkaloid frameworks in an enantioselective fashion. Strategic bromination at the indole C3 position greatly improved the allylic alkylation chemistry and enabled a highly efficient Negishi cross‐coupling downstream. The first catalytic enantioselective total synthesis of (?)‐goniomitine, along with divergent formal syntheses of (+)‐aspidospermidine and (?)‐quebrachamine, are reported herein.     

Syntheses of (5E)-PGE2 and New 6-Functionalized Derivatives by the Use of Palladium-Catalyzed Decarboxylative Allylic Alkylation

(5 )-Prostaglandin E₂ (7) was synthesized fron ( )-4- -butyldimethylsilyloxy-2-cyclopentenone (1) by 2-alkenyloxycarbonylatlon of the organocopper conjugate-addition adduct (3) followed by intramolecular palladium-catalyzed decarboxylative allylic alkylation. The (5 )-prostaglandin E₂ skeleton was also obtained from the β-keto allylic ester (11) by a similar decarboxylative allylic alkylation. The decarboxylative allylic alkylation of another type of the three-component coupling product (12) gave new 6-methyleneprostaglandin E1 skeleton (15a), which was converted into new 6-methylprosta-glandin I methyl ester (20) 6-methyleneprostaglandin F₁ derivative (16) by two different ways. The stereochemistry of this intramolecular decarboxylative allylic alkylation was discussed in the reaction of 2-[( )- or ( )-2-butenyloxy-carbonyl] cyclopentanone systems.     

Friedel-Crafts-type allylation of nitrogen-containing aromatic compounds with allylic alcohols catalyzed by a [Mo3S4Pd(η3-allyl)] cluster

With the direct use of allylic alcohols as allylating agents, the Friedel-Crafts-type allylic alkylation of nitrogen-containing aromatic compounds catalyzed by a [Mo(3)S(4)Pd(η(3)-allyl)] cluster is achieved. With a 3 mol % catalyst loading in acetonitrile at reflux or 60 °C, a variety of N,N-dialkylanilines and indoles reacted smoothly with allylic alcohols to afford the Friedel-Crafts-type allylation products in good to excellent yields with high levels of regioselectivity.     

Nickel‐Catalyzed Reductive Allylation of Tertiary Alkyl Halides with Allylic Carbonates

The construction of all C(sp³) quaternary centers has been successfully achieved under Ni‐catalyzed cross‐electrophile coupling of allylic carbonates with unactivated tertiary alkyl halides. For allylic carbonates bearing C1 or C3 substituents, the reaction affords excellent regioselectivity through the addition of alkyl groups to the unsubstituted allylic carbon terminus. The allylic alkylation method also exhibits excellent functional‐group compatibility, and delivers the products with high E selectivity.     

CuPd Nanoparticles as a Robust Catalyst for Electrochemical Allylic Alkylation

An efficient CuPd nanoparticle (NP) catalyst (3 nm CuPd NPs deposited on carbon support) is designed for catalyzing electrochemical allylic alkylation in water/isopropanol (1:1 v/v) and 0.2 m KHCO₃ solution at room temperature. The Pd catalysis was Pd/Cu composition‐dependent, and CuPd NPs with a Pd/Cu ratio close to one are the most efficient catalyst for the selective cross‐coupling of alkyl halides and allylic halides to form C?C hydrocarbons with product yields reaching up to 99 %. This NP‐catalyzed electrochemical allylic alkylation expands the synthetic scope of cross‐coupling reactions and can be further extended to other organic reaction systems for developing green chemistry electrosynthesis methods.     

Iridium‐Catalyzed Enantioselective Indole Cyclization: Application to the Total Synthesis and Absolute Stereochemical Assignment of (−)‐Aspidophylline A

The first enantioselective total synthesis of (?)‐aspidophylline A, including assignment of its absolute configuration has been accomplished. A key element of the synthesis is a highly enantioselective indole allylic alkylation/iminium cyclization cascade which was developed by employing a combination of Lewis acid activation and an iridium/ligand catalyst. This strategy relies on the direct use of 2,3‐disubstituted indoles with secondary allylic alcohols appended at C2 and heteronucleophiles appended at C3, indoles which are easily prepared from simple starting materials under C?H activation conditions.     

Catalytic allylic alkylation via the cross-dehydrogenative-coupling reaction between allylic sp3 C-H and methylenic sp3 C-H bonds

A catalytic allylic alkylation was developed via the cross-dehydrogenative-coupling reaction of allylic sp3 C-H and methylenic sp3 C-H catalyzed by copper bromide and cobalt chloride in the presence of an oxidizing reagent, t-BuOOH. This methodology provides a direct way to use allylic sp3 C-H bonds for forming C-C bonds.     

Pd.Et3B-catalyzed alkylation of amines with allylic alcohols

A combination of catalytic amounts of Pd (0.05 mmol) and Et3B (0.3 mmol) promotes allylic alkylation of primary and secondary aromatic and aliphatic amines (1.0 mmol) by the direct use of allylic alcohols, providing tertiary amines in excellent yields under mild conditions (room temperature approximately 50 degrees C).     

Bulky monodentate phosphoramidites in palladium-catalyzed allylic alkylation reactions: aspects of regioselectivity and enantioselectivity

A series of bulky monodentate phosphoramidite ligands, based on biphenol, BINOL and TADDOL backbones, have been employed in the Pd-catalysed allylic alkylation reaction. Reaction of disodium diethyl 2-methyl malonate with monosubstituted allylic substrates in the presence of palladium complexes of the phosphoramidite ligands proceeds smoothly at room temperature. The regioselectivities observed depend strongly on the leaving group and the geometry of the allylic starting compounds. Mono-coordination occurs when these ligands are ligated in [Pd(allyl)(X)] complexes (allyl=C3H5, 1-CH3C3H4, 1-C6H5C3H4, 1,3-(C6H5)2C3H3; X=Cl, OAc). The solid-state structure determined by X-ray diffraction of [Pd(C3H5)(1)(Cl)] reveals a non-symmetric coordination of the allyl moiety, caused by the stronger trans influence of the phosphoramidite ligand relative to X-. In all of these complexes, the syn,trans isomer is the major species present in solution. Because of fast isomerisation and high reactivity of the syn,cis complex, the major product formed upon alkylation is the linear product, especially for monosubstituted phenylallyl substrates in the presence of halide counterions. In the case of biphenol- and BINOL-based phosphoramidites, however, a strong memory effect is observed when 1-phenyl-2-propenyl acetate is employed as the substrate. In this case, nucleophilic attack competes effectively with the isomerisation of the transient cinnamylpalladium complexes. The asymmetric allylic alkylation of 1,3-diphenyl-2-propenyl acetate afforded the chiral product in up to 93 % ee. Substrates with smaller substituents gave lower enantioselectivities. The observed stereoselectivity is explained in terms of a preferential rotation mechanism, in which the product is formed by attack on one of the isomers of the intermediate [Pd[1,3-(C6H5)2C3H3](L)(OAc)] complex.     

Effective synthesis of bicyclodienes via palladium-catalyzed asymmetric allylic alkylation and ruthenium-catalyzed cycloisomerization

[n.3.0]Bicycles (n = 3–6) can be synthesized using palladium-catalyzed asymmetric allylic alkylation followed by ruthenium-catalyzed cycloisomerization. New types of triarylphosphino-1,2-diaminooxazoline ligands show the same high levels of enantioselectivity observed with Trost ligand when employed in Pd-catalyzed allylic alkylation reactions. The enyne products of these allylic alkylation reactions were further elaborated using a Ru-catalyzed redox isomerization process, for which a mechanism is proposed.     

Biomimetic synthesis of hyperolactones

Through a biomimetic pathway, hyperolactone D, 4-hydroxyhyperolactone D, and hyperolactone C were synthesized from methyl acetoacetate via Weiler's dianion method, asymmetric allylic alkylation, biomimetic lactonization, oxidation, and cyclization. The stereochemistry of the quaternary carbon was controlled efficiently by Palladium-catalyzed asymmetric allylic alkylation. This strategy was also used for the synthesis of hyperolactone B.     

Regioselective synthesis of 3-alkylindoles mediated by zinc triflate

Zinc triflate was found to be an effective reagent for the C3-alkylation of indoles by alkyl halides in the presence of Hünig's base and tetrabutylammonium iodide. This new method for indole alkylation proceeds by a S(N)1-like pathway, and is general for allylic, benzylic, and tertiary halides.     

Features and applications of [Rh(CO)(2)Cl](2)-catalyzed alkylations of unsymmetrical allylic substrates

A novel regio- and stereoselective [Rh(CO)2Cl]2-catalyzed allylic alkylation of unsymmetrical allylic carbonates was discovered. The regioselectivity of the reaction favors product ratios in which substitution occurs at the carbon bearing the leaving group. When an enantiomerically enriched carbonate (> or = 99% ee) was examined, the Rh(I)-catalyzed allylic alkylation proceeded stereoselectively to provide the alkylation product with retention of absolute stereochemistry (98% ee). To establish the scope of the [Rh(CO)2Cl]2-catalyzed allylic alkylation, a variety of carbon and heteroatom nucleophiles were examined and the results described. As an application of the Rh(I)-catalyzed allylic alkylation, a series of novel domino reactions have been developed that couple the unique regio- and stereoselective [Rh(CO)2Cl]2-catalyzed alkylation of allylic trifluoroacetates with an intramolecular Pauson-Khand annulation, a cycloisomerization, or a [5+2] cycloaddition. A unique aspect of the method described is the use of a single catalyst to effect sequential transformations in which the catalytic activity is moderated simply by controlling the reaction temperature. Implementation of such processes provides a rapid and efficient entry to a variety of bicyclic carbon skeletons from simple precursors.     

Geminal dicarboxylates as carbonyl surrogates for asymmetric synthesis. Part II. Scope and applications.

An enantioselective synthesis of allylic esters has been achieved by a novel asymmetric alkylation of allylic gem-dicarboxylates. The catalyst derived from palladium(0) and R,R-1,2-di(2'-diphenylphosphinobenzamido)cyclohexene efficiently induced the alkylation process with a variety of nucleophiles to provide allylic esters as products in good yield. High regio- and enantioselectivities were observed in the alkylation with most nucleophiles derived from malonate, whereas a modest level of ee's was obtained in the reactions with less reactive nucleophiles such as bis(phenylsulfonyl)ethane. In the latter case, a slow addition procedure proved effective, leading to significantly improved ee's. The utility of the alkylation products was demonstrated by several synthetically useful transformations including allylic isomerizations, allylic alkylations, and Claisen rearrangements. Using these reactions, the chirality of the initial allylic carbon-oxygen bond could be transferred to new carbon-oxygen, carbon-carbon, or carbon-nitrogen bonds in a predictable fashion with high stereochemical fidelity. The conversion of gem-diesters to chiral esters by the substitution reaction is the equivalent of an asymmetric carbonyl addition by stabilized nucleophiles. In conjunction with the subsequent reactions that occur with high stereospecificity, allylic gem-dicarboxylates serve as synthons for a double allylic transformation.     

Highly enantioselective regiodivergent allylic alkylations of MBH carbonates with phthalides

Phthalides were used for the first time in the allylic alkylation reactions with MBH carbonates for the creation of chiral 3,3-disubstituted phthalides. Highly enantioselective regiodivergent synthesis of γ-selective or β-selective allylic alkylation products was achieved by employing bifunctional chiral phosphines or multifunctional tertiary amine-thioureas as the catalyst, respectively. It was demonstrated that proper selection of catalysts and reaction conditions would differentiate an S(N)2'-S(N)2' pathway and an addition-elimination process, yielding different regioisomers of the allylic alkylation products in a highly enantiomerically pure form.     

Nickel‐Catalyzed Allylic Alkylation with Diarylmethane Pronucleophiles: Reaction Development and Mechanistic Insights

Palladium‐catalyzed allylic substitution reactions are among the most efficient methods to construct C?C bonds between sp³‐hybridized carbon atoms. In contrast, much less work has been done with nickel catalysts, perhaps because of the different mechanisms of the allylic substitution reactions. Palladium catalysts generally undergo substitution by a “soft”‐nucleophile pathway, wherein the nucleophile attacks the allyl group externally. Nickel catalysts are usually paired with “hard” nucleophiles, which attack the metal before C?C bond formation. Introduced herein is a rare nickel‐based catalyst which promotes substitution with diarylmethane pronucleophiles by the soft‐nucleophile pathway. Preliminary studies on the asymmetric allylic alkylation are promising.     

Stereodivergent synthesis via iridium-catalyzed asymmetric double allylic alkylation of cyanoacetate

Methods that enable the rapid construction of multiple C–C bonds using a single catalyst with high diastereo- and enantio-control are particularly valuable in organic synthesis. Here, we report an Ir-catalyzed double allylic alkylation reaction in which bisnucleophilic cyanoacetate reacted successionally with electrophilic π-allyl-Ir species, producing various pseudo-C₂-symmetrical cyanoacetate derivatives in high yield with excellent stereocontrol. More challenging sequential allylic alkylation/allylic alkylation with two distinct allylic carbonates that can deliver the corresponding products bearing three contiguous tertiary–quaternary–tertiary stereocenters was also developed by using a modified catalytic system, which is revealed to be associated with the quasi-dynamic kinetic resolution of the initially formed diastereomeric monoallylation intermediates. Notably, stereodivergence for this sequential process depending on a single iridium catalyst was successfully realized, and up to six stereoisomers could be predictably prepared by combining the appropriate enantiomer of the chiral ligand for the iridium catalyst and adjusting the adding sequence of two distinct allylic precursors.

Ir-catalyzed asymmetric double AAA reaction of cyanoacetate was developed, affording cyanoacetate derivatives in high yield with excellent stereocontrol. Notably, quasi-DKR is involved in the sequential protocol with two distinct allylic carbonates.