Towards the industrial production of antioxidants from food processing by-products with ultrasound-assisted extraction

Apple pomace, a by-product of the cider production, has been studied as a potential source of polyphenols, compounds of great interest for the industry. Ultrasound has been used to improve extraction efficiency in terms of time needed and total polyphenol content. A preliminary study has been first investigated to optimize ethanol proportion of aqueous extractant (50%, v/v) and solid/liquid ratio (<15%, w/v). A response surface methodology has then been used to maximize total polyphenol content of extracts and investigate influence of parameters involved in extraction procedures for both total polyphenols content and composition of extracts. Optimal settings reached from a central composite design were applied for ultrasound-assisted extraction and were compared to conventional procedure: yields were increased by more than 20%. Ultrasound-assisted polyphenols extraction from apple pomace appears to be a relevant, rapid, sustainable alternative to conventional procedure, and that scale up of the process is possible.     

Ultrasound induced green solvent extraction of oil from oleaginous seeds

Ultrasound-assisted extraction of rapeseed oil was investigated and compared with conventional extraction for energy efficiency, throughput time, extraction yield, cleanness, processing cost and product quality. A multivariate study enabled us to define optimal parameters (7.7 W/cm² for ultrasonic power intensity, 40 °C for processing temperature, and a solid/liquid ratio of 1/15) for ultrasound-assisted extraction of oil from oilseeds to maximize lipid yield while reducing solvent consumption and extraction time using response surface methodology (RSM) with a three-variable central composite design (CCD). A significant difference in oil quality was noted under the conditions of the initial ultrasound extraction, which was later avoided using ultrasound in the absence of oxygen. Three concepts of multistage cross-current extraction were investigated and compared: conventional multistage maceration, ultrasound-assisted maceration and a combination, to assess the positive impact of using ultrasound on the seed oil extraction process. The study concludes that ultrasound-assisted extraction of oil is likely to reduce both economic and ecological impacts of the process in the fat and oil industry.     

Quantitative determination of oil content in small quantity of oilseed rape by ultrasound-assisted extraction combined with gas chromatography

Accurately quantitative determination of oil content in oilseed rape plays an important role in varieties breeding for improving oil content in seeds. However, large quantity of oilseeds were needed in order to obtain accuracy and precision results by using standard Soxhlet extraction method, which may be a handicap in analysis of small, rare and precious samples in plant breeding. In the present work, ultrasound-assisted extraction was evaluated as a simpler and more effective alternative to conventional extraction method for the isolation of oil from small quantity of oilseed rape (<20 mg). The oil of oilseed rape samples was extracted by ultrasound-assisted method, and then the fatty acids and total oil content of the seeds were qualitatively and quantitatively determined by gas chromatography (GC). Extraction efficiency of total oil obtained by ultrasound-assisted extraction through an orthogonal experiment (L(9) (3(4))) were investigated to get the best extraction conditions. Statistical analysis showed that the variable with the largest effect was the ultrasound-assisted extraction time which was followed by the ultrasound-assisted extraction power, and the liquid:solid ratio. A liquid:solid ratio of 1:4 (L:g), an ultrasound-assisted extraction time of 60 min and an ultrasound-assisted extraction power of 500 W were found to be optimal for oil extraction from oilseed rape. By comparing with the conventional method, it was found that the ultrasound-assisted extraction of oil from oilseed rape was about five times faster than the traditional extraction method. By the use of ultrasound-assisted extraction combined with GC analysis, the fatty acids and total oil content in small quantity of seeds (<20 mg) were successfully qualitatively determined and the results are in agreement with that obtained by traditional standard method.     

Ultrasound-assisted extraction of three bufadienolides from Chinese medicine ChanSu

In this study, the application of ultrasound-assisted extraction (UAE) method was shown to be more efficient in extracting anti-tumor bufadienolides (bufalin, cinobufagin and resibufogenin) from important animal medicine of ChanSu than the maceration extraction (ME) and soxhlet extraction (SE) method. The effects of ultrasonic variables including extraction solvent, solvent concentration, solvent to solid ratio, ultrasound power, temperature, extraction time and particle size on the yields of three bufadienolides were investigated. The optimum extraction conditions found were: 70% (v/v) methanol solution, solvent to solid ratio of 10ml/g, ultrasound power of 125W, temperature of 20°C, extraction time of 20min and particle size of 60-80 mesh. The extraction yields of bufalin, cinobufagin and resibufogenin were 43.17±0.85, 52.58±1.12, 137.70±2.65mg/g, respectively. In order to achieve a similar yield as UAE, soxhlet extraction required 6h and maceration extraction required much longer time of 18h. The results indicated that UAE is an alternative method for extracting bufadienolides from ChanSu.     

Simultaneous extraction of epimedin A, B, C and icariin from Herba Epimedii by ultrasonic technique

An ultrasonic-assisted extraction (UAE) procedure of epimedin A, epimedin B, epimedin C and icariin from Herba Epimedii was developed. The effects of ethanol concentration, ratio of liquid to solid, UAE time, extraction temperature and number of extraction cycles on the extraction yields of the four flavonoids from Herba Epimedii were investigated. The optimal UAE condition was found using orthogonal test: 50% (v/v) ethanol solution, liquid:solid ratio of 30 ml/g, ultrasonication duration 30 min, extraction temperature 50 degrees C and three extraction cycles. The UAE method showed a high reproducibility. Epimedin A, B, C and icariin in the crude extract exhibited photodegradation under ultraviolet irradiation. This UAE method was shown to be highly efficient compared with the conventional Soxhlet extraction and boiling extraction. The effect of ultrasound on cell destruction was examined by scanning electron microscopy. The contents of epimedin A, B, C and icariin in the leaves of 20 Epimedium species were determined using high-performance liquid chromatographic method following UAE method.     

Investigation on ultrasound-assisted extraction of salvianolic acid B from Salvia miltiorrhiza root

It is reported that salvianolic acid B, a bioactive phenolic compound contained in the root of Salvia miltiorrhiza, exhibits a much stronger activity in free radical scavenging and antioxidance than those of vitamin E. When a conventional refluxing method is adopted to extract salvianolic acid B from the root, in which the materials are subjected to higher temperature and longer time, the yield of this phenolic compound is lower due to the possibility of its hydrolysis to tanshinol. However, a higher extraction yield can be achieved over a shorter time period and lower temperature when an ultrasound-assisted extraction method is used. This paper investigated the parameters influencing the extraction of salvianolic acid B. Factors such as extraction time, frequency of the ultrasound, the ratio of solvent to material, and types of extraction solvent were examined. A comparison was also conducted between conventional refluxing and ultrasound-assisted extraction. Results showed that the optimal parameters to extract salvianolic acid B from the root of S. miltiorrhiza were as follows: ultrasonic frequency: 45 Hz; solvent: 60% aqueous ethanol; extraction temperature: 30 °C; extraction time duration: 25 min.; ratio of solvent to material: 20:1 (v/w, ml/g). Under these conditions, the yield of salvianolic acid B was 5.17 mg/g (33.93 mg/g) higher than those with conventional refluxing method (28.76 mg/g), indicating that the efficiency and the yield of ultrasound-assisted extraction method are higher than reflux method, and the hydrolysis of salvianolic acid B to tanshinol is effectively avoided.     

Green ultrasound-assisted extraction of carotenoids from pomegranate wastes using vegetable oils

The objective of this work was to develop a new process for pomegranate peels application in food industries based on ultrasound-assisted extraction of carotenoids using different vegetable oils as solvents. In this way, an oil enriched with antioxidants is produced. Sunflower oil and soy oil were used as alternative solvents and the effects of various parameters on extraction yield were studied. Extraction temperature, solid/oil ratio, amplitude level, and extraction time were the factors investigated with respect to extraction yield. Comparative studies between ultrasound-assisted and conventional solvent extraction were carried out in terms of processing procedure and total carotenoids content. The efficient extraction period for achieving maximum yield of pomegranate peel carotenoids was about 30 min. The optimum operating conditions were found to be: extraction temperature, 51.5 °C; peels/solvent ratio, 0.10; amplitude level, 58.8%; solvent, sunflower oil. A second-order kinetic model was successfully developed for describing the mechanism of ultrasound extraction under different processing parameters.     

Comparative study of ultrasonic pretreatment and ultrasound assisted three phase partitioning for extraction of custard apple seed oil

Custard apple seed oil is a marketable product extracted from custard apple seed which is a potential agriculture waste. The present work aims to elucidate simultaneous extraction of the custard apple seed oil and proteins using three phase partitioning (TPP). The efficient oil extraction was executed by optimization of parameters including time, slurry ratio, salt concentration, and slurry to t-butanol ratio. Additionally, the application of ultrasound as process intensification tool for TPP was studied that reduces the time of conventional TPP and increases the yield by 2.53%. The work also comprises a comparative study of two modes of ultrasound application, namely ultrasound pre-treatment and simultaneous ultrasound assisted TPP. This work proves ultrasonic pre-treatment followed by TPP as a superior mode of ultrasound application that attributes 33.6 ± 0.56% (w/w) oil extraction with optimized pre-treatment time of 150 s, 30 W ultrasound power and 75% duty cycle. Extraction kinetics studied for conventional, Ultrasound assisted Three Phase Partitioning (UTPP), and Ultrasound Pre-treatment assisted Three Phase Partitioning (UPTPP) were observed to fit Peleg’s model.     

Ultrasound-assisted extraction of polyphenols from native plants in the Mexican desert

Several plants that are rich in polyphenolic compounds and exhibit biological properties are grown in the desert region of Mexico under extreme climate conditions. These compounds have been recovered by classic methodologies in these plants using organic solvents. However, little information is available regarding the use of alternative extraction technologies, such as ultrasound. In this paper, ultrasound-assisted extraction (UAE) parameters, such as the liquid:solid ratio, solvent concentration and extraction time, were studied using response surface methodology (RSM) for the extraction of polyphenols from desert plants including Jatropha dioica, Flourensia cernua, Turnera diffusa and Eucalyptus camaldulensis. Key process variables (i.e., liquid:solid ratio and ethanol concentration) exert the greatest influence on the extraction of all of the phenolic compounds (TPC) in the studied plants. The best conditions for the extraction of TPC involved an extraction time of 40 min, an ethanol concentration of 35% and a liquid:solid ratio ranging from 8 to 12 ml g⁻¹ depending on the plant. The highest antioxidant activity was obtained in the E. camaldulensis extracts. The results indicated the ability of UAE to obtain polyphenolic antioxidant preparations from desert plants.     

Influencing factors and kinetics analysis on the leaching of iron from boron carbide waste-scrap with ultrasound-assisted method

In this paper, the ultrasound-assisted leaching of iron from boron carbide waste-scrap was investigated and the optimization of different influencing factors had also been performed. The factors investigated were acid concentration, liquid-solid ratio, leaching temperature, ultrasonic power and frequency. The leaching of iron with conventional method at various temperatures was also performed. The results show the maximum iron leaching ratios are 87.4%, 94.5% for 80 min-leaching with conventional method and 50 min-leaching with ultrasound assistance, respectively. The leaching of waste-scrap with conventional method fits the chemical reaction-controlled model. The leaching with ultrasound assistance fits chemical reaction-controlled model, diffusion-controlled model for the first stage and second stage, respectively. The assistance of ultrasound can greatly improve the iron leaching ratio, accelerate the leaching rate, shorten leaching time and lower the residual iron, comparing with conventional method. The advantages of ultrasound-assisted leaching were also confirmed by the SEM-EDS analysis and elemental analysis of the raw material and leached solid samples.     

Physicochemical,structural, and digestive properties of pea starch obtained via ultrasonic-assisted alkali extraction

As a new and clean extraction technology, ultrasonic extraction has been demonstrated with great potential in the preparation of modified starch. In order to increase its added value, it is necessary to modify pea starch to enlarge its application. In this study, the efficiency of combining ultrasonic with alkali in the extraction of pea starch was evaluated and compared to conventional alkali extraction. Ultrasonic-assisted alkali extraction conditions were optimized using single-factor experiments and response surface methodology. The results revealed that maximum yield of pea starch (54.43 %) was achieved using ultrasound-assisted alkali extraction under the following conditions: sodium hydroxide solution with a concentration of 0.33 %, solid/alkali solution ratio of 1:6 (w/v), ultrasonic power of 240 W, temperature of 42 °C, and extraction time of 22 min. The ultrasound-assisted alkali extraction yielded 13.72 % greater pea starch than conventional alkali extraction. On the other hand, morphological, structural, and physicochemical properties of the obtained starch isolates were evaluated. The ultrasound-assisted alkali extraction resulted in pea starch with greater amylose content, water-solubility, swelling power, and viscosity compared with conventional alkali extraction. Furthermore, ultrasonication influenced the morphological properties of pea starch granules, while the molecular structure and crystal type were not affected. Moreover, the ultrasonic-assisted extraction produced starch with a slightly greater resistant starch content. Therefore, ultrasonic-assisted extraction can be suggested as a potential method for extracting pea starch with improved functional properties.     

Green extraction of lutein from marigold flower petals,process optimization and its potential to improve the oxidative stability of sunflower oil

Marigold flower petals are considered the richest source of lutein which possesses immense applications in the food and health sector. The study was undertaken to improve the stability of sunflower oil by enriching it with lutein extracted from marigold flower petals using safe and green technology. The extraction of lutein was optimized using Box-Behnken design by ultrasound-assisted extraction (UAE) employing sunflower oil as a solvent. The impact of three independent variables i.e., ultrasonic intensity, solid to solvent ratio, and extraction time were evaluated on the amount of lutein extracted and its antioxidant activity. Highest amount of lutein (21.23 mg/g) was extracted by employing ultrasonic intensity of 70 W/m2, extraction time of 12.5 min, and solid to solvent ratio of 15.75%. FT-IR spectra of lutein extracted by ultrasound and conventional extraction show similar peaks depicting that ultrasound does not have any impact on the functionality of lutein. Sunflower oil incorporated with lutein at 1000 PPM and the synthetic antioxidant (TBHQ) showed good oxidative stability than oil with 500 PPM lutein and no lutein during accelerated storage for a month. The oxidative stability was shown by different oil samples in the following order: TBHQ = 1000PPM lutein˃500PPM lutein ˃control oil. It was concluded that the ultrasound technique extracts lutein efficiently from marigold flowers and this lutein was effective in improving the oxidative stability of sunflower oil under accelerated storage conditions.     

Ultrasound-assisted extraction of geniposide from Gardenia jasminoides

Fructus gardeniae (Zhizi), one of commonly-used traditional Chinese medicines, is derived from the ripe fruit of the evergreen shrub, Gardenia jasminoides Ellis, and is an ingredient of many traditional Chinese preparations, and has numerous pharmacological actions. Geniposide is the important bioactive element derived from F. gardeniae. This study established optimum conditions and method of ultrasound-assisted extraction for geniposide from F. gardeniae by exploring the different experimental parameters, such as type of solvent, ratio of solid/liquid, extraction temperature and extraction time. The data gained from this study is important to further extract and apply the geniposide and is also a significant reference to extract the bioactive compounds from plant materials by the ultrasound-assisted method.     

Optimization of ultrasonic cell grinder extraction of anthocyanins from blueberry using response surface methodology

Ultrasonic cell grinder extraction (UCGE), using water as the solvent, was firstly applied to extract anthocyanins from blueberry. Extraction yield was related with four variables, including ratio of solution to solid, extraction power, buffer time, and extraction time. On the basis of response surface methodology (RSM), the optimal conditions were determined to be the ratio of solution to solid as 25:1 (mL/g), the extraction power as 1500 W, the buffer time as 3.0 s, and the extraction time as 40 min. The experimental yield of anthocyanins using UCGE was 2.89 mg/g higher than that of conventional ultrasound-assisted extraction (CUAE). This study indicated that UCGE was an innovative, efficient, and environment friendly method in ultrasonic extraction fields, and had a potential to effectively extract other bioactive constituents.     

Ultrasound-assisted extraction of d-pinitol from carob pods using Response Surface Methodology

This study reports on the optimization of the conditions of extraction of d-pinitol compound from carob pods by using ultrasonication. For this purpose, the Box–Behnken design, which is a widely used form of Response Surface Methodology, was used to investigate the effects of parameters on the ultrasound-assisted extraction. Four independent variables, temperature (°C), ultrasonic power (W), dilution rate (material:water ratio) and time (min), were studied. The results showed that the highest d-pinitol concentration of 11.98 g/L was obtained with an extraction temperature of 50 °C, ultrasonic power of 207 W, a dilution rate of 1:4 and an extraction time of 120 min. It was found that the d-pinitol concentration of carob extract increased with the effect of ultrasonication during the extraction process. Therefore, ultrasound-assisted extraction could be used as an alternative to conventional hot water extraction with respect to the recovery of d-pinitol from carob pods with the advantages of lower extraction temperatures, shorter extraction time and reduced energy consumption.     

微波辅助萃取-分光光度法测定卫矛中总黄酮

采用微波辅助萃取法提取,以分光光度法测定卫矛样品中的总黄酮含量。并且通过单因素实验和正交实验设计优化了溶剂浓度、溶剂用量、微波功率和微波辐射时间等微波提取条件,确定了微波辅助萃取法提取卫矛中黄酮类化合物的最佳条件为：使用60%乙醇,在液固比40：1条件下,以255 W的微波功率,微波辐射5 min。在上述最优条件下进行了精密度和回收率实验,所得结果的相对标准偏差为1.71% (n=5),回收率在97%～101%之间。与传统的索氏提取法和超声波提取法比较,微波辅助萃取法具有操作简便,经济可靠,重现性好等特点。该实验采用的微波辅助萃取-分光光度法测定法简便高效,可推广应用于各类中草药中总黄酮的含量测定。     

Ultrasound-assisted extraction of phillyrin from Forsythia suspensa

Forsythia suspensa (Thunb.) Vahl is one of the most widely used traditional Chinese medicines, and possesses important biological activities, such as antibacterial, antiviral, anti-inflammatory and antioxidant activities. Phillyrin is the main bioactive component of Forsythia suspensa. In this paper, ultrasound-assisted extraction of phillyrin from Forsythia suspensa was studied with HPLC-photodiode array detection. Effects of several experimental parameters, such as type and concentration of extracting solvent, ratio of liquid to material, extraction temperature, and time of sonication on extraction efficiencies of phillyrin from Forsythia suspensa were evaluated. The optimal extraction conditions were 1g plant sample with 10 ml of 20% methanol and the extraction for 60 min at 60°C under ultrasonic irradiation. Under the optimum conditions, the yield of phillyrin was 0.713±0.009 mg/g. The results indicated that the ultrasound-assisted extraction is a very useful method for the extraction of important phytochemicals from plant materials.     

Ultrasound-assisted cyanide extraction of gold from gold concentrate at low temperature

A sonochemical reactor was developed to study the ultrasound-assisted cyanide extraction of gold from gold ore at low temperature. The effects of ultrasound on gold leaching in low temperature and conventional conditions were investigated. At the low temperature of 10 °C, ultrasound-assisted extraction increased extraction rate of gold by 0.6%–0.8% and reduced the gold content of cyanide tailings to 0.28 g/t in the leaching of gold concentrate and cyanide tailings, respectively. At the conventional temperature of 25 °C, ultrasound-assisted extraction obtained a 0.1% higher extraction rate of gold compared with conventional extraction, with the unit consumption of NaCN reduction of 15%. The analysis of kinetic model also demonstrated that sonication indeed improved the reaction of gold leaching greatly. The mineralogy and morphology of ore were further analyzed by X-ray diffraction (XRD), scanning electron microscope (SEM) and particle size analyzer to explore the strengthening mechanism of gold leaching. The results showed that the ore particles were smashed, the ore particle surface was peeled, the passive film was destroyed and the reaction resistance decreased under ultrasonic processing. Therefore, the extraction rate of gold was improved and the extraction time was shortened significantly in ultrasound-assisted cyanide extraction.     

Ultrasound-assisted extraction of oleanolic acid and ursolic acid from Ligustrum lucidum Ait

Oleanolic acid and ursolic acid are the main bioactive compounds in fruit of Ligustrum lucidum Ait, which possess anti-inflammatory, antioxidative, antiprotozoal, antimutagenic and anticancer properties. In this study, the ultrasound-assisted extraction of oleanolic acid and ursolic acid from L. lucidum Ait was investigated with HPLC-photodiode array detection. Effects of several experimental parameters, such as type and concentration of extraction solvent, ratio of liquid to material, extraction temperature and extraction time, on extraction efficiencies of oleanolic acid and ursolic acid from L. lucidum were evaluated. The influence of experimental parameters on extraction efficiency of ursolic acid was more significant than that of oleanolic acid. The optimal extraction conditions were 95% ethanol, the ratio of material to liquid at 1:20, and extraction for 10 min at 40 °C under ultrasonic irradiation. Under the optimal conditions, the yields of oleanolic acid and ursolic acid were 6.3 ± 0.25 and 9.8 ± 0.30 mg/g, respectively. The results indicated that the ultrasound-assisted extraction is a very useful method for the extraction of oleanolic acid and ursolic acid from L. lucidum.     

微波辅助提取甘草中甘草苷的工艺研究

以乙醇溶液为溶剂微波辅助提取甘草中甘草苷,紫外可见分光光度法测定甘草苷的含量。以甘草苷的提取率为评价指标,考察微波辐射时间、料液比、乙醇浓度、微波功率等因素,利用正交设计实验,筛选最佳工艺条件。结果表明最佳工艺条件为：微波辐射时间40min、料液比为1∶12（g∶mL）、乙醇浓度为40%、微波功率640W。与传统回流提取方法相比,微波辅助提取快速,甘草苷的提取率较高。