Trapping unstable terminal M-O multiple bonds of monocyclopentadienyl niobium and tantalum complexes with Lewis acids

Hydrolysis of [NbCp'Cl(4)] (Cp' = η(5)-C(5)H(4)SiMe(3)) with the water adduct H(2)O·B(C(6)F(5))(3) afforded the oxo-borane compound [NbCp'Cl(2){O·B(C(6)F(5))(3)}] (2a). This compound reacted with [MgBz(2)(THF)(2)] giving [NbCp'Bz(2){O·B(C(6)F(5))(3)}] (2b), whereas [NbCp'Me(2){O·B(C(6)F(5))(3)}] (2c) was obtained from the reaction of [NbCp'Me(4)] with H(2)O·B(C(6)F(5))(3). Addition of Al(C(6)F(5))(3) to solutions containing the oxo-borane compounds [MCp(R)X(2){O·B(C(6)F(5))(3)}] (M = Ta, Cp(R) = η(5)-C(5)Me(5) (Cp*), X = Cl 1a, Bz 1b, Me 1c; M = Nb, Cp(R) = Cp', X = Cl 2a) afforded the oxo-alane complexes [MCp(R)X(2){O·Al(C(6)F(5))(3)}] (M = Ta, Cp(R) = Cp*, X = Cl 3a, Bz 3b, Me 3c; M = Nb, Cp(R) = Cp', X = Cl 4a), releasing B(C(6)F(5))(3). Compound 3a was also obtained by addition of Al(C(6)F(5))(3) to the dinuclear μ-oxo compound [TaCp*Cl(2)(μ-O)](2), meanwhile addition of the water adduct H(2)O·Al(C(6)F(5))(3) to [TaCp*Me(4)] gave complex 3c. The structure of 2a and 3a was obtained by X-ray diffraction studies. Density functional theory (DFT) calculations were carried out to further understand these types of oxo compounds.     

Substituent effects on CL···N, S···N, and P···N noncovalent bonds

Cl, S, and P atoms have previously been shown as capable of engaging in a noncovalent bond with the N atom on another molecule. The effects of substituents B on the former atoms on the strength of this bond are examined, and it is found that the binding energy climbs in the order B = CH(3) < NH(2) < CF(3) < OH < Cl < NO(2) < F. However, there is some variability in this pattern, particularly for the NO(2) group. The A···N bonds (A = Cl, S, P) can be quite strong, amounting to as much as 10 kcal/mol. The binding energy arises from approximately equal contributions from its induction and electrostatic components, although the former becomes more dominant for the stronger bonds. The induction energy is due in large measure to the transfer of charge from the N lone pair to a B-A σ* antibonding orbital of the electron-acceptor molecule containing Cl, S, or P. These A···N bonds typically represent the lowest-energy structure on each potential energy surface, stronger than H-bonds such as NH···F, CH···N, or SH···N.     

Synthesis and Crystal Structure of a Ruthenium(II) Compound of Dinitrogen

The title compound [Ru(bph)(PPh3)2(N2)]·(PF6)·1.5CH2Cl2 (bph = N-(benzoyl)- N?-(picolinylidene)-hydrazine) has been prepared and characterized by X-ray diffraction analysis. It crystallizes in the monoclinic system, space group P21/n with a = 13.5201(6), b = 15.5078(6), c = 25.0656(13) ?, β = 100.257(3)°, C50.50H43Cl3F6N5OP3Ru, Mr = 1150.23, V = 5171.4(4) ?3, Z = 4, F(000) = 2332, Dc = 1.477 g/cm3 and μ(MoKα) = 0.615 mm-1. The structure was refined to R = 0.0524 and wR = 0.1398 for 8060 observed reflections (I > 2σ(I)). The Ru-N2 and N(N bond distances are 1.919(4) and 1.133(5) ?, respectively.     

Synthesis and Crystal Structure of Compound[Ni（bipy）3][（μ—oxo）Fe2Cl6]

1 INTRODUCTION Recently, functional models for oxo-bridged diiron (Ⅲ) complexes have received much attention[1, 2]. They provide structural models for diiron sites in several proteins involved in oxygen storage of hemerythrin[3] and oxygen activation of methane monooxygenase[4]. In addition, several synthetic FeOFe (-oxo) diiron(Ⅲ) complexes show catalase-like activity[5, 6]. One of our studies in this respect is trying to synthesis -oxo bridged diiron complexes. The compound [Fe(ph…     

On the Cl···N halogen bond: a rotational study of CF3Cl···NH3

The rotational spectra of six isotopologues (CF(3)(35)Cl···(14)NH(3), CF(3)(37)Cl···(14)NH(3), CF(3)(35)Cl···(15)NH(3), CF(3)(37)Cl···(15)NH(3), CF(3)(35)Cl···(14)ND(3) and CF(3)(37)Cl···(14)ND(3)) of the CF(3)Cl···NH(3) adduct have been investigated and analyzed by pulsed jet Fourier transform microwave spectroscopy. Rotational, centrifugal distortion and quadrupole ((35)Cl, (37)Cl, (14)N) coupling constants have been precisely obtained. The two subunits of the complex are held together via a Cl···N halogen bond interaction. Information on the internal dynamics and on the dissociation energy of the complex is provided.     

1D and 2D assembly structures by imidazole···chloride hydrogen bonds of iron(II) complexes [Fe(II)(HL(n-Pr))3]Cl·Y (HL(n-Pr) = 2-methylimidazol-4-yl-methylideneamino-n-propyl; Y = AsF6, BF4) and their spin states

Two Fe(II) complexes fac-[Fe(II)(HL(n-Pr))(3)]Cl·Y (Y = AsF(6) (1) and BF(4) (2)) were synthesized, where HL(n-Pr) is 2-methylimidazole-4-yl-methylideneamino-n-propyl. Each complex-cation has the same octahedral N(6) geometry coordinated by three bidentate ligands and assumes facial-isomerism, fac-[Fe(II)(HL(n-Pr))(3)](2+) with Δ- and Λ-enantiomorphs. Three imidazole groups per Δ- or Λ-fac-[Fe(II)(HL(n-Pr))(3)](2+) are hydrogen-bonded to three Cl(-) ions or, from the viewpoint of the Cl(-) ion, one Cl(-) ion is hydrogen-bonded to three neighbouring fac-[Fe(II)(HL(n-Pr))(3)](2+) cations. The 3?:?3 NH···Cl(-) hydrogen bonds between Δ- or Λ-fac-[Fe(II)(HL(n-Pr))(3)](2+) and Cl(-) generate two kinds of assembly structures. The directions of the 3?:?3 NH···Cl(-) hydrogen bonds and hence the resulting assembly structures are determined by the size of the anion Y, though Y is not involved into the network structure and just accommodated in the cavity. Compound 1 has a 1D ladder structure giving a larger cavity, in which the Δ- and Λ-fac-[Fe(II)(HL(n-Pr))(3)](2+) enantiomorphs are bridged by two NH···Cl(-) hydrogen bonds. Compound 2 has a 2D network structure with a net unit of a cyclic trimer of {fac-[Fe(II)(HL(n-Pr))(3)](2+)···Cl(-)}(3) giving a smaller cavity, in which Δ- or Λ-fac-[Fe(II)(HL(n-Pr))(3)](2+) species with the same chirality are linked by NH···Cl(-) hydrogen bonds to give a homochiral 2D network structure. Magnetic susceptibility and M?ssbauer spectral measurements demonstrated that compound 1 showed an abrupt one-step spin crossover with 4.0 K thermal hysteresis of T(c↓) = 125.5 K and T(c↑) = 129.5 K and compound 2 showed no spin transition and stayed in the high-spin state over the 5-300 K temperature range.     

Substitution behaviour of novel dinuclear Pt(II) complexes with bio-relevant nucleophiles

The novel dinuclear Pt(II) complexes [{trans-Pt(NH(3))(2)Cl}(2)(μ-pyrazine)](ClO(4))(2) (Pt1), [{trans-Pt(NH(3))(2)Cl}(2)(μ-4,4'-bipyridyl)](ClO(4))(2)·DMF (Pt2), and [{trans-Pt(NH(3))(2)Cl}(2)(μ-1,2-bis(4-pyridyl)ethane)](ClO(4))(2) (Pt3), were synthesized. Acid-base titrations, and temperature and concentration dependent kinetic measurements of the reactions with biologically relevant ligands such as thiourea (Tu), glutathione (GSH) and guanosine-5'-monophosphate (5'-GMP) were studied at pH 2.5 and 7.2. The reactions were followed under pseudo-first-order conditions by stopped-flow and UV-vis spectrophotometry. (1)H NMR spectroscopy was used to follow the substitution of chloride in the complex [{trans-Pt(NH(3))(2)Cl}(2)(μ-4,4'-bipyridyl)](ClO(4))(2)·DMF by guanosine-5'-monophosphate (5'-GMP) under second-order conditions. The results indicate that the bridging ligand has an influence on the reactivity of the complexes towards nucleophiles. The order of reactivity of the investigated complexes is Pt1 > Pt2 > Pt3.     

浊点萃取分光光度法测定水样中的痕量锌(Ⅱ)

为建立浊点萃取预富集测定水样中痕量锌的新方法,在表面活性剂TritonX-114存在下,利用5-Br-PADAP与锌(Ⅱ)产生显色反应的性能,采用分光光度法测定了水样中的痕量锌。结果表明,在pH8.5的NH3-NH4Cl缓冲体系中,锌(Ⅱ)与5-Br-PADAP形成紫红配合物,其最大吸收波长为λ=555 nm,摩尔吸光系数为ε=1.284×105L.mol-1.cm-1,检测限为0.003 7μg.mL-1.锌含量在0~1.2μg.mL-1范围内服从比尔定律。该法有较好的选择性,具有低毒、高效、安全、简便等特点,直接用于水样中痕量锌的测定,结果满意,重复6次测定相对标准偏差为2.18%。     

The influence of functionality on the adsorption of p-hydroxy benzoate and phthalate at the hematite-electrolyte interface

Kinetics of adsorption of p-hydroxy benzoate and phthalate on hematite-electrolyte interface were investigated at a constant ionic strength, I = 5 x 10(-4) mol dm(-3), pH 5 and at three different temperatures. The state of equilibrium for the adsorption of p-hydroxy benzoate onto hematite surfaces was attained at 70 h, whereas it was 30 h for phthalate-hematite system. None of the three kinetics models (Bajpai, pseudo first order and pseudo second order) is applicable in the entire experimental time period; however, the pseudo second order kinetics model is considered to be better than the pseudo first order kinetics model in estimating the equilibrium concentration both the p-hydroxy benzoate-hematite and phthalate-hematite systems. The variation of adsorption density of p-hydroxy benzoate and phthalate onto hematite surfaces as a function of concentration of adsorbate was studied over pH range 5-9 at a constant ionic strength, I = 5 x 10(-4) mol dm(-3) and at constant temperature. The adsorption isotherms for both the systems were Langmuir in nature and the maximum adsorption density (Gamma(max)) of p-hydroxy benzoate is approximately 1.5 times more than that of phthalate on hematite at pH 5 and 30 degrees C in spite of an additional carboxylic group at ortho position in phthalate. This is due to the more surface area coverage by phthalate than that of p-hydroxy benzoate on hematite surface. The activation energy was calculated using Arrhenius equation and the activation energy for adsorption of p-hydroxy benzoate at hematite-electrolyte interface is approximately 1.8 times more than that of phthalate-hematite system. The negative Gibbs free energy indicates that the adsorption of p-hydroxy benzoate and phthalate on hematite surfaces is favourable. The FTIR spectra of p-hydroxy benzoate and phthalate after adsorption on hematite surfaces were recorded for obtaining the bonding properties of adsorbates. The phenolic nu(CO) appears at approximately 1271 cm(-1) after adsorption of p-hydroxy benzoate on hematite surfaces, which shifted by 10 cm(-1) to higher frequency region. The phenolic group is not deprotonated and is not participating in the surface complexation. The shifting of the nu(as)(COO-) and nu(s)(COO-) bands and non-dissolution of hematite suggest that the p-hydroxy benzoate and phthalate form outer-sphere surface complex with hematite surfaces in the pH range of 5-7.     

Development and Evaluation of a Nanoporous Iron (Hydr)oxide Electrode for Phosphate Sensing

Nanoporous iron (hydr)oxide electrodes are evaluated as phosphate sensors using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The intensity of the reduction peak current (I_cp) of the ferrihydrite working electrode is tied to phosphate concentration at low pH; however, a hematite electrode combined with the use of EIS provided reliable sensing data at multiple pH values. Nanoporous hematite working electrodes produced an impedance phase component (θ) that shifts with increasing phosphate, and, at chosen frequencies, θ values were fitted for the range 1 nM to 0.1 mM phosphate at pH 4 and pH 7 in 5 mM NaClO₄.     

2,2'-联吡啶In(Ⅲ)配合物与DNA作用的电化学研究

应用循环伏安法、微分脉冲伏安法和交流阻抗法研究了配合物In(bpy)Cl3.H2O与DNA在Tris-HCl缓冲溶液(pH=7.2)中的相互作用.结果表明:配合物中心In(Ⅲ)离子的循环伏安曲线上呈现一对准可逆的氧化还原波,DNA与配合物作用后,配位中心离子的氧化还原峰电流明显降低,扩散系数减小,电化学反应阻抗增大,式量电位负移,表明该配合物与DNA的作用方式为静电结合.     

环丙沙星－锰络合吸附波的研究

环丙沙星－锰络合吸附波的研究①张加玲樊惠芝潘景浩＊（山西大学化学系,太原０３０００６）环丙沙星（ｃｉｐｒｏｆｌｏｘａｃｉｎ简写ＣＰＦＸ）是新一代氟喹诺酮类抗菌药物之一,它的抗菌力强、抗菌谱宽,临床应用非常广泛．关于氟喹诺酮类抗菌药物与抗酸剂、维生素类...     

Structure of the Manganese (V) Complex-Mn·3/2(μ-DHBQ)·4H_2O·2Cl

FewcompoundswithMninthe 5oxidationstatewerestructuraIlycharacterizedsofaLC.L.HilIlfirstdeterminedthecrystalstructUreoftheMn(V)complex:NMnTpMPP-Nitriodotrtrakis(p-methoxyphenyl)porphinnato-manganese(V).Thepapers'-'reportedseveralnovelmanganese(V)and(Vl)complexes.RecentpublicationshavebeenestablishedthatthecoordinationcompoundsofhighvaIentmanganesedisplaymanyinterestingfeatures.Theyshowabilitytoundergointramolecularinterligandormetal-ligandelectrontransferreaction,especiallyonthenatUreo…     

Biomimetic hydrocarbon oxidation catalyzed by nonheme iron(III) complexes with peracids: evidence for an Fe(V)=O species

Mononuclear nonheme iron(III) complexes of tetradentate ligands containing two deprotonated amide moieties, [Fe(Me(2)bpb)Cl(H(2)O)] (3 a) and [Fe(bpc)Cl(H(2)O)] (4 a), were prepared by substitution reactions involving the previously synthesized iron(III) complexes [Et(3)NH][Fe(Me(2)bpb)Cl(2)] (3) and [Et(3)NH][Fe(bpc)Cl(2)] (4). Complexes 3 a and 4 a were characterized by IR and elemental analysis, and complex 3 a also by X-ray crystallography. Nonheme iron(III) complexes 3, 3 a, 4, and 4 a catalyze olefin epoxidation and alcohol oxidation on treatment with m-chloroperbenzoic acid. Pairwise comparisons of the reactivity of these complexes revealed that the nature of the axial ligand (Cl(-) versus H(2)O) influences the yield of oxidation products, whereas an electronic change in the supporting chelate ligand has little effect. Hydrocarbon oxidation by these catalysts was proposed to involve an iron(V) oxo species which is formed on heterolytic O-O bond cleavage of an iron acylperoxo intermediate (FeOOC(O)R). Evidence for this iron(V) oxo species was derived from KIE (k(H)/k(D)) values, H(2) (18)O exchange experiments, and the use of peroxyphenylacetic acid (PPAA) as the peracid. Our results suggest that an Fe(V)=O moiety can form in a system wherein the supporting chelate ligand comprises a mixture of neutral and anionic nitrogen donors. This work is relevant to the chemistry of mononuclear nonheme iron enzymes that are proposed to oxidize organic substrates via reaction pathways involving high-valent iron oxo species.     

煅烧温度对阳极氧化WO3多孔薄膜的形貌及光电化学性能的影响

采用一步式阶跃电压加压方法,在NH4F/(NH4)2SO4电解质溶液中对W片进行阳极氧化处理制备了WO3多孔薄膜,通过后续热处理温度的控制,制备了性能规律性变化的WO3多孔纳米薄膜材料.用场发射扫描电镜(FE-SEM)、X射线衍射(XRD)分析等手段考察了热处理温度对氧化钨晶体结构和形貌影响的规律,在450°C以下的煅烧温度下,薄膜保持50-100nm孔径;通过对光电化学性质、光催化降解甲基橙动力学行为的研究,考察了不同热处理温度对WO3多孔薄膜光电转换性能影响的规律.研究表明,450°C煅烧处理后的WO3薄膜在500W氙灯光源照射及1.2V偏压下,光电流密度达到5.11mA·cm-2;340及400nm单色光辐射下光电转换效率(IPCE)值分别达到87.4%及22.1%.电化学交流阻抗谱显示,450°C煅烧处理后的WO3薄膜表现出最佳的导电率及最小的界面电荷转移电阻.实验结果证明,高结晶度的多孔结构是WO3薄膜具有高光电转换效率的主要因素,控制热处理温度是实现薄膜具有高孔隙率、完整结晶度、低电阻的重要手段.     

NH4Cl和HCl溶液浸取电石渣制备多晶型CaCO3

以电石渣为原料,分别以NH4Cl溶液和HCl溶液为浸取剂提取电石渣中的钙,以NH4HCO3为碳化剂制备CaCO3。研究了两种浸取工艺对电石渣中Ca^2+离子提取率的影响,并对两种体系浸取得到的Ca^2+离子提取率、二次残渣量和滤液中的杂质情况,以及制得的CaCO3的产率和性状进行了比较。结果表明,在浸取时间为30 min,浸取剂浓度为2.5 mol·L^-1,pH为8的条件下,以NH4Cl溶液浸取电石渣,加入量按Cl^-/Ca^2+物质的量比为2.0,得到Ca^2+离子提取率为92.87%;以HCl溶液浸取电石渣,加入量按Cl-/Ca^2+物质的量比为2.2,得到Ca^2+离子提取率为98.65%。Ca^2+离子滤液中的主要杂质通过调节pH均可以得到有效控制。NH4Cl溶液浸取电石渣Ca^2+离子提取率略低,二次残渣量高(22.39%),制得CaCO3的产率为1.065 g·g^-1电石渣;HCl溶液浸取电石渣Ca^2+离子提取率高,二次残渣量小(8.87%),制得CaCO3的产率为1.203 g·g^-1电石渣。两种浸取液碳化后制得的CaCO3产品纯度都在99%以上,白度在92.2-97.1%之间,通过控制碳化条件均可制得方解石型、球霰石型和文石型三种晶型的CaCO3。     

Etching behavior of silicon nanowires with HF and NH4F and surface characterization by attenuated total reflection Fourier transform infrared spectroscopy: similarities and differences between one-dimensional and two-dimensional silicon surfaces

A systematic study of the etching behavior of one-dimensional (1-D) Si nanowires (SiNWs) in various HF and NH4F etching solutions is reported. The concentration and pH dependences of the etching time (which is inverse to the "stability") of the SiNWs in these solutions were investigated. A V-shaped bimodal etching curve was observed for HF solutions with concentrations of 0.5-40%. Specifically, SiNWs exhibit high stability in both low (0.5%) and high (40%) concentrations of HF solution, with the lowest stability (i.e., fastest etching rate) occurring at 2% (1 M) HF solution. With NH4F, the time needed to totally etch away the SiNWs sample decreases with increasing concentration (from 1-40%). The opposite is true when the pH of the NH4F solution was maintained at 14. These surprising results were rationalized in terms of "passivation" of the SiNW surfaces by HF or related molecules via hydrogen bonding for Si-H-terminated surfaces in HF solutions (with low pH values) and by NH4(+) ions via ionic bonding for Si-O(-)-terminated surfaces in NH4F solutions (with high pH values), respectively. Furthermore, it was found that SiNWs are stable only in relatively narrow pH ranges in these solutions. When SiNWs are etched with HF, the stability range is pH = 1-2 where the surface moieties are Si-H(x) species (x = 1-3). When SiNWs are etched with NH4F, the stability range is pH = 12-14 where the surface moieties are mainly Si-(O-)x species (x = 1-3). These rationales were confirmed by attenuated total reflection Fourier transform infrared spectroscopy measurements, which showed that, while etching SiNWs with HF gave rise to Si-H(x) surface species, no Si-H(x) species were observed when SiNWs were etched with NH4F. The latter finding is at odds with the corresponding results reported for the two-dimensional (2-D) Si wafers where etching with either HF or NH4F produces Si-H(x) species on the surface. This difference suggests either that the etching mechanisms for NH4F versus HF are different for SiNWs or, more likely, that the Si-H(x) surface species produced in NH4F solutions are so unstable that they are hydrolyzed readily at pH > 4. The similarities and differences of the etching behaviors and the resulting surface speciations between the 1-D SiNWs and the 2-D Si wafers suggest that the nanoscale structures as well as the low dimensionality of SiNWs may have contributed to the rapid hydrolysis of the surface Si-H(x) species in NH4F solutions, especially at high pH values.     

Comparison of the performance of dispersion-corrected density functional theory for weak hydrogen bonds

Potential energy curves for five complexes with weak to medium strong hydrogen bonds have been computed with dispersion corrected DFT methods. The electronic density based vdW-DF2 and VV10 van der Waals density functionals have been tested, as well as an atom pair-wise correction method (DFT-D3). The short-range exchange-correlation components BLYP and rPW86-PBE together with the extended aug-cc-pVQZ basis sets have been employed. Reference data have been computed at the estimated CCSD(T)/CBS(aQ-a5) level of theory. The investigated systems are CH(4)·NH(3), Cl(3)CH·NH(3), NH(3)·NH(3), CH(3)F·C(2)H(2) and CH(3)F·H(2)O with binding energies ranging from -0.7 kcal mol(-1) to -5.5 kcal mol(-1). We find that all dispersion corrected methods perform reasonably well for these hydrogen bonds, but also observe distinct differences. The BLYP-D3 method provides the best results for three out of five systems. For the fluorinated complexes, the VV10 method gives remarkably good results. The vdW-DF2 method yields good interaction energies similar to the other methods (mean average deviation of 0.2-0.3 kcal mol(-1)), but fails to provide accurate equilibrium separations. Based on these results and previous experience with the computation of non-covalent interactions, for large-scale applications we can recommend DFT-D3 based structure optimizations with subsequent checking of interaction energies by single-point VV10 computations. Comparison of the DFT-D3 and VV10 results leads to the conclusion that the short-range exchange-correlation functional and not the dispersion correction mainly determines the achievable accuracy.     

Nafion基氧化还原聚合物在空气中的电荷传输性能

利用三明治电池和伏安法测试了不同制备条件的Nafion基氧化还原聚合物膜在空气中的电荷传输性能. 研究结果表明, 混合适量聚乙二醇(PEG)的Nafion基金属联吡啶配合物{Nafion[M(bpy)2+3, PEG](M=Ru, Fe)}膜的表观电荷传递扩散系数(Dct)达到10-6-10-7 cm2·s-1 , 电子或空穴迁移率(μ)达到10-4-10-5 cm2·V-1·s-1. 在导电玻璃(ITO)电极与Nafion基氧化还原聚合物膜界面引入一层导电聚苯胺(PANI)后, 降低了其接触电阻, 使氧化还原聚合物膜的Dct提高至10-5-10-6 cm2·s-1, μ提高至10-3-10-4 cm2·V-1·s-1, 且工作电流提高了近两个数量级. 该固态氧化还原聚合物膜的性能比较稳定, 在空气中放置30天后其Dct和μ降低得很少.     

微波灰化-原子荧光光谱法测定卷烟纸中镉

卷烟纸样品于瓷坩埚中,放入微波灰化系统中在450℃灰化20min,残渣加入体积分数为2.5%盐酸溶液溶解转入50mL容量瓶中定容后,供原子荧光光谱仪测定卷烟纸中镉的含量。在优化的仪器条件下,镉的质量浓度在0.2～10μg.L-1范围内与其荧光强度呈线性关系,方法的检出限(3s/k)为0.018μg.L-1。方法用于分析卷烟纸样品,所得回收率在94.4%～98.4%之间。方法的日内和日间相对标准偏差(n=7)分别为2.2%和2.8%。