The influence of solvent structure on the solvolysis oftrans-dichlorotetra (4-ethylpyridine) cobalt(III) perchlorate

Summary The solvolysis oftrans-[Co(4-Etpy)₄Cl₂]ClO₄, was followed spectrophotometrically in water/isopropanol at different temperatures. The activation energy varied nonlinearly with the mole fraction of the co-solvent, ₂. The plot of logk versus D _s ^–1 was also non-linear. These features were attributed to the differential solvation of the initial and transition states. On plotting H versus S, the points fall very close to straight line. The isokinetic temperature was found to be 334K, indicating that the solvolysis reaction is controlled by S and not H. The change in H and S with the mole fraction of the cosolvent shows extrema at the composition range where changes in solvent structure occur. The influence of the solvent structure on the complex ion in the transition state dominates over that in the initial state, where –G _t ⁰ [Co(4-Etpy)₄Cl]²⁺>–G _t ⁰ [Co(4-Etpy)₄Cl₂]⁺.     

Kinetic and mechanistic studies on the interaction of<Emphasis Type="SmallCaps">DL</Emphasis> -Penicillamine with the hydroxopentaaquarhodium(III) ion

The kinetics of interaction between DL-Penicillamine and [Rh(H₂O)₅OH]²⁺ have been studied spectrophotometrically as a function of [Rh(H₂O)₅OH²⁺], [DL-Pen], pH and temperature. The reaction has been monitored at 242 nm, the _max of the substituted complex and where the spectral difference between the reactant and product is a maximum. The reaction rate increases with [DL-Pen] and reaches a limiting value at a higher ligand concentration. From the experimental findings an associative interchange mechanism for the substitution process is suggested. The activation parameters (H}=35.8 ± 1.6 kJ mol^–1, S=–209 ± 5 J K^–1 mol^–1) support the proposition. The negative G ⁰ (–13.6 kJ mol^–1) for the first equilibrium step also supports the spontaneous formation of an outersphere association complex.     

An independent kinetic and mechanistic study of the secondary reactions in the substitution of [FeL(OH)](n−2)− (L= triethylenetetraaminehexaacetic acid) by cyanide ions

Summary The kinetics of reaction between [Fe(CN)₅OH]^3– and CN^– have been investigated spectrophotometrically at pH=11.00, I=0.25 M(NaClO₄) and temp.=25.0°C by disappearance of the absorption peak at 395 nm. The rate data for this reaction followed first order kinetics in both [Fe(CN)₅OH^3–] and [CN^–]. The second order rate constant (k_f) was found to be (3.44±0.08)×10^–3 M^–1 s^–1. The pH dependence of the reaction was also investigated in the range 9–12. The activation parameters were found to be H=36.4kJ mol^–1 and S=–168JK^–1 mol^–1.The reaction between [Fe(CN)₆]^3– and TTHA^6– (TTHA=triethylenetetraaminehexaacetic acid) has also been followed spectrophotometrically at 420 nm, pH=11.00, I=0.1M (NaClO₄) and temp.=25.0°C. This reaction also followed first order kinetics in both [Fe(CN) ₆ ^3– ] and [TTHA^6–]. The second order rate constant (k_f) was found to be (3.74±0.21)×10^–2 M^–1 s^–1. The rate of reaction was found to increase with pH in the range 9–11.5. The different reactive species of TTHA (L) are H₂L^4– HL^5– and L^6–. The rate constants for these species have been calculated and the pH profile is explained. The values of the activation parameters were found to be H= 30.9 kJmol^–1 and S=–167JK^–1 mol^–1. Electron transfer from [Fe(CN)₆]^3– to the substrate followed by decomposition of the latter is proposed. The oxidation products of TTHA have been investigated by g.l.c.     

Solvent effects on the initial and transition states upon solvolysis oftrans-dichlorotetra(4-ethylpyridine) cobalt(III) perchlorate in water +t-butanol mixtures

Summary The solvolysis of the title complex was investigated in water and in water +t-butanol mixtures in the 40 to 55°C range. The activation thermodynamic parameters were calculated and the extrema observed for H and S were compared with data obtained from the measured physical properties of the same solvent mixtures. The ethyl substituent in the pyridine rings manifests its effect on the activation entropy values and on the relatively low activation energies compared with the respective values obtained previously from the solvolysis oftrans-[Co(4-MePy)₄Cl₂]⁺ in the same media. The free energies of transfer of the cation were calculated in the ground and transition states. In the ground state, the ethyl and methyl substituents in the pyridine rings provide the complex cation with nearly equal stabilities. However, the effect of solvent on the cation stability is more pronounced in the transition state for the ethyl substituent.     

X-ray diffraction (powder), e.s.r. and other spectral studies oftris[methylenebis(diphenylphosphine oxide)]iron(III) perchlorate

Summary Bifunctional methylenebis(diphenylphosphine oxide) (mdpo) on reaction with iron(III) perchlorate forms the complex, [Fe(mdpo)₃](ClO₄)₃ · H₂O. This has been characterized through elemental analysis, i.r., far-i.r., u.v. and visible spectroscopy and by x-ray diffraction, magnetic moment, molar conductance and e.s.r. data. The e.s.r. spectrum consists of five lines with transitions from: ¦–5/2¦–3/2¦–3/2¦–1/2, ¦–1/2¦+1/2¦+1/2¦+3/2 and ¦+3/2¦+5/2 centred at a g-value of 2.00. On the basis of these studies, a chelated octahedral structure has been assigned to the cation, [Fe(mdpo)₃]³⁺.     

Novel dioximato-bridged chromium(III)-copper(II)-chromium(III) trinuclear complexes with ferromagnetic exchange interactions

Summary Two new dioximato-bridged trinuclear Cr^II-Cu^II-Cr^III complexes, [Cr(salen)-Cu(-BD)₂-Cr(salen)] (1) and [Cr(salen)-Cu(-FD)₂-Cr(salen)]-H₂O (2), have been prepared and characterized [salen^2– = N,N-ethylene- bis (salicylideneiminate), (-BD)^2– = -benzyldioximato and (-FD)^2– = -furildioximato]. Magnetic susceptibility measurements in the 4.2–300 K range demonstrated the operation of a ferromagnetic interaction between the adjacent Cr^III and Cu^II ions through oximato bridges in both (1) and (2). Based on spin Hamiltonians =–2J(₁₂+₂₃)(S₁=S₃=3/2,S₂=1/2) the exchange integrals (J) were evaluated as 3.19 and 5.38 cm^–1 for (1) and (2), respectively.     

Mechanism of the oxidation of L-ascorbic acid by the bis(pyridine-2,6-dicarboxylate)cobaltate(III) ion in aqueous solution

A detailed investigation of the oxidation of L-ascorbic acid (H₂A) by the title complex has been carried out using conventional spectrophotometry at 510 nm, over the ranges: 0.010 [ascorbate] _T 0.045 mol dm^–3, 3.62 pH 5.34, and 12.0 30.0 °C, 0.50 I 1.00 mol dm^–3, and at ionic strength 0.60 mol dm^–3 (NaClO₄). The main reaction products are the bis(pyridine-2,6-dicarboxylate)cobaltate(II) ion and l-dehydroascorbic acid. The reaction rate is dependent on pH and the total ascorbate concentration in a complex manner, i.e., k _obs = (k ₁ K ₁)[ascorbate] _T /(K ₁ + [H⁺]). The second order rate constant, k ₁ [rate constant for the reaction of the cobalt(III) complex and HA^–] at 25.0 °C is 2.31 ± 0.13 mol^–1 dm³ s^–1. H = 30 ± 4 kJ mol^–1 and S = –138 ± 13 J mol^–1 K^–1. K ₁, the dissociation constant for H₂A, was determined as 1.58 × 10^–4 mol dm^–3 at an ionic strength of 0.60 mol dm^–3, while the self exchange rate constant, k ₁₁ for the title complex, was determined as 1.28 × 10^–5 dm³ mol^–1 s^–1. An outer-sphere electron transfer mechanism has been proposed.     

The effects of cyclodextrin inclusion of the ferrocenemonocarboxylate anion on the kinetics of its oxidation by bis(pyridine-2,6-dicarboxylato)cobaltate(III) in aqueous solution

The effects of -, -, dm-(heptakis(2,6-di-O-methyl)--) and -cyclodextrins (CD) on the kinetics of the electron-transfer reaction of the ferrocenemonocarboxylate anion (FCA^–) with bis(pyridine-2,6-dicarboxylato)cobaltate(III) have been investigated in aqueous solution (0.20 M Na₂HPO₄, pH 9.2) at 25.0°C. Substantial decreases in the rate constants for the electron-transfer reactions were observed upon cyclodextrin inclusion of the reductant, due to an increase in the FCA^0/– reduction potential and to the insulation of the reductant from oxidant. The inclusion stability constants for {FCA·CD}^– were evaluated from the¹H NMR and kinetic data, and the order of the stability constants was found to be -CDdm-CD-CD>-CD.     

Kinetics and mechanism of the acid-catalyzed hydrolysis of [carbonatoethylenediamine(L)2cobalt(III)]+ ions

The kinetics of acid-catalyzed hydrolysis of the [Co(en)(L)₂(O₂CO)]⁺ ion (L = imidazole, 1-methylimidazole, 2-methylimidazole) follows the rate law –d[complex]/dt = {k ₁ K[H⁺]/(1 + K[H⁺])}[complex] (15–30 or 25–40 °C, [H⁺] = 0.1–1.0 M and I = 1.0 M (NaClO₄)). The reaction course consists of a rapid pre-equilibrium protonation, followed by a rate determining chelate ring opening process and subsequent fast release of the one-end bound carbonato ligand. Kinetic parameters, k ₁ and K, at 25 °C are 5.5 × 10^–2 s^–1, 0.44 M^–1 (ImH), 5.1 × 10^–2 s^–1, 0.54 M^–1 (1-Meim) and 3.8 × 10^–3 s^–1, 0.74 M^–1 (2-MeimH) respectively, and activation parameters for k ₁ are H₁ = 43.7 ± 8.9 kJ mol^–1, S₁ = –123 ± 30 J mol^–1 deg^–1 (ImH), H₁ = 43.1 ± 0.3 kJ mol^–1, S₁ = –125 ± 1 J mol^–1 deg^–1 (1-Meim) and H₁ = 64.2 ± 4.3 kJ mol^–1, S₁ = –77 ± 14 J mol^–1 deg^–1 (2-MeimH). The results are compared with those for similar cobalt(III) complexes.     

Reaction between cis-diaquabisbiguanideruthenium(III) and hexathiocyanatochromium(III) ions in aqueous media. A mechanistic survey on the formation of a dinuclear bridged complex

The reaction between two complex species [Ru(BigH)₂(H₂O)₂]³⁺ and [Cr(SCN)₆]^3– has been investigated in aqueous medium in the pH range 4.00–6.10, and followed in the 21–40 °C range. Pseudo-first order rate constants were evaluated using the chromium complex in a ten-fold excess. The plot of k _obs versus pH has a bell shaped profile. From this and other evidence it was concluded that only the [Ru(BigH)₂(OH)(H₂O)]²⁺ form of the ruthenium complex is reactive under the experimental conditions, and forms the dinuclear complex [Ru(BigH)₂--(SCN)₂-Cr(NCS)₄]⁰. The rate constant for the dinuclear complex formation at 31 °C is (2.57 ± 0.05) × 10^–3 mol^–1 s^–1. H = 60 ± 2 kJ mol^–1 and S = 116 ± 10 J K^–1 mol^–1.     

Internal Mobility, Phase Transition, and Ionic Conductivity in Thallium(I) Heptafluorodiantimonate(III)

The internal mobility of fluorine ions and the electrophysical properties of TlSb₂F₇ were studied by the ¹⁹F NMR method and impedance spectroscopy. Modes of ionic motions in the fluoride subsystem were determined in the temperature range 213–430 K. A structural phase transition is found to occur at 400 K, resulting in the TlSb₂F₇ modification characterized by high ionic (superionic) conductivity in the temperature range of 400–430 K 2.5·10^-3 S/cm at 430 K).     

Kinetics and mechanism of the reactions ofcis-tetraaminediaqua-cobalt(III) with nitrite,azide and salicylate ions in aqueous acidic media

Summary Kinetic studies of the anation of the title complex by NO ₂ ^– show that it occurs in a stepwise manner leading to thecis-dinitro-complex both steps having a common rate equation:-d[complex]/dt = a[NO ₂ ^– ]/{[NO ₂ ^– ] + b}. The variation ofpseudo-first-order rate constant (k_obs) with [NO ₂ ^– ] indicates that the reaction proceeds through ion-pair interchange path. Activation parameters calculated by the Eyring equation are: H ₁ = (65±7) kJ mol^–1 and S ₁ = (–82±11) JK^–1 mol^–1 for the formation of [Co(NH₃)₄(NO₂)(H₂O)]²⁺, and H ₂ = (97±1) kJ mol^–1 and S ₂ = (6±2) JK^–1 mol^–1 for the formation of [Co(NH₃)₄(NO₂)₂]⁺. Anation of the title complex by N ₃ ^– at pH 4.1 also occurs in a stepwise manner ultimately producing thecis-diazido species. At a fixed pH the reaction shows a first-order dependence on [N ₃ ^– ] for each step. pH-variation studies at a fixed [N ₃ ^– ] show that the hydroxoaqua-form of the complex reactsca. 16 times faster than the diaqua form. Evidence is presented for an ion-pair preequilibrium at high ionic strength (I = 2.0 mol dm^–3). Activation parameters obtained from temperature variation studies are: H ₁ = (121±1) kJ mol^–1 and S ₁ = (104±3) JK^–1 mol^–1 (for the first step anation), and H ₂ = (111±2) kJ mol^–1 and S ₂ = (74±9) JK^–1 mol^–1 (for the second step anation). The reaction ofcis-tetraaminediaquacobalt(III) ion with salicylate (HSal^–) has been studied in aqueous acidic medium in the temperature range 39.8–58.2°C. The reaction is biphasic corresponding to the anation of two salicylate ions. The kinetic results for the first phase reaction are compatible with the equation: k_obs = k_IPQ[HSal^–]/(1 + Q[HSal^–]) where Q denotes ion-pair formation constant and k_IP is the first-order rate constant for the interchange reaction. The activation parameters obtained from the temperature dependence of rate are: H = (138±3) kJ mol^–1 and S = (135±4) JK^–1 mol^–1. The reaction seems to take place by a dissociative interchange mechanism.     

Complexation,solubilities and thermodynamic functions for cerium(III) fluoride-water system

The solubility, solubility product and the thermodynamic functions for the CeF₃–H₂O system have been measured using the radiometric, conductometric and potentiometric techniques. The radiometric values for the solubility and solubility product, the lowest and more acceptable for reasons cited in previous papers, are 3.14·10^–5 M and 2.17·10^–17 respectively. The enthalpy change measured by the conductometric method is almost twice as that obtained by potentiometric method due to abnormal conductances registered at higher temperatures. The average values for H^o and G^o and S^o at 298 K are 53.0±17.4, 91.7±4.0 and –129.7±58.2 KJ·mol^–1 respectively. The positive values for H^o and G^o and the negative value for S^o are indicative of the low solubility of this salt in water. The stability constants for the mono- and difluoride complexes of Ce(III) have been determined potentiometrically using unsaturated solution mixtures of Ce(III) and F^–. These values for CeF⁺ and CeF ₂ ⁺ are 997±98 and (1.03±0.44)·10⁵, respectively. Studies on pH dependence of the solubility shows that the solubility reaches a minimum value at a pH of about 3.2.     

Kinetics of the interaction of aquo-ethylenediaminetetraacetatoruthenate(III) with ferricyanide ion in water

Summary The interaction of aquo-ethylenediaminetetraacetatoruthenate(III) with ferricyanide ion was studied spectrophotometrically as a function of ferricyanide ion concentration, pH (1.5–8.5) and temperature (30–45°C) at ionic strength 0.2 M (NaClO₄). Kinetic and activation parameters (H=27.1±1.75 KJ mol^–1, S=–136.7±5.57 J mol^–1 deg^–1) are consistent with the proposed mechanism.     

Kinetics of the Ru(III) catalyzed oxidation of formaldehyde and acetaldehyde by alkaline hexacyanoferrate(III)

The kinetics of ruthenium(III) catalyzed oxidation of formaldehyde and acetaldehyde by alkaline hexacyanoferrate(III) has been studied spectrophotometrically. The rate of oxidation of formaldehyde is directly proportional to [Fe(CN) _3– ⁶ ] while that of acetaldehyde is proportional tok[Fe(CN) _3– ⁶ ]/{k +k[Fe(CN) _3– ⁶ ]}, wherek, k andk are rate constants. The order of reaction in acetylaldehyde is unity while that in formaldehyde falls from 1 to 0. The rate of reaction is proportional to [Ru(III)] _T in each case. A suitable mechanism is proposed and discussed.

---

Die Kinetik der Ru(III)-katalysierten Oxidation von Formaldehyd und Acetaldehyd mittels alkalischem Hexacyanoferrat(III)

Zusammenfassung Die Untersuchung der Kinetik erfolgte spektrophotometrisch. Die Geschwindigkeitskonstante der Oxidation von Formaldehyd ist direkt proportional zu [Fe(CN) _3– ⁶ ], währenddessen die entsprechende Konstante für Acetaldehyd proportional zuk[Fe(CN) _3– ⁶ ]/{k +k[Fe(CN) _3– ⁶ ]} ist, wobeik,k undk Geschwindigkeitskonstanten sind. Die Reaktionsordnung für Acetaldehyd ist eine erste, die für Formaldehyd fällt von erster bis zu nullter Ordnung. Die Geschwindigkeitskonstante ist in jedem Fall proportional zu [Ru(III)] _T . Es wird ein passender Mechanismus vorgeschlagen.

     

The kinetics of the oxidation-reduction reaction between uranium(VI) and titanium(III) in HCl solution

The oxidation-reduction reaction between U(VI) and Ti(III) in HCl solution was studied spectrophotometrically. The reaction is second-order at all concentrations of reactants, HCl, ferrous chloride and mannitol used in this work. In 5M HCl the rate constantk increases with increasing Ti(III) concentration, whereas it decreases with increasing U(VI) concentration, with increasing HCl concentration from 1.00M to 7.17M and increases thereafter from 7.17M to 11.79M. The addition of mannitol causes a consistent decrease in the rate of reaction, whereas ferrous chloride has no effect. The activation energy for this oxidation-reduction reaction was 47.90±0.11 kJ·mol^–1. The values of H , G and S were 45.40±0.11 kJ·mol^–1, 72.50±0.17 kJ·mol^–1 and –91.10±0.22J·k^–1·mol^–1, respectively. The mode of reaction is discussed in the light of kinetic results.     

Adsorption and Electrochemical Behavior of Cobalt Tetra(p-methoxyphenyl)porphyrin at Anisotropic Pyrographite

The electrochemical behavior and electrocatalytic activity of cobalt tetra(p-methoxyphenyl)porphyrin (CoTMPP) adsorbed at anisotropic pyrographite in the reaction of oxygen electroreduction in 0.5 M H₂SO₄ is studied by cyclic voltammetry. Dependences of voltammogram parameters (currents and potentials of maximums of the Co^3+/2+TMPP redox reaction, numbers of adsorbed and working molecules, values of uncompensated layer resistance) on the adsorbate concentration (10^–6 to 10^–3 M) in chloroform are analyzed. It is concluded that adsorbed molecules change their orientation from a flat to an inclined position at c _CoMPP> 5 × 10^–5 M. The optimum, as to the effectiveness of CoTMPP in the oxygen reduction, is the adsorption layer thickness close to the thickness of a monolayer of flatly-oriented molecules.     

Kinetic and mechanistic studies on the interaction of thymidine with the hydroxopentaaquarhodium(III) ion

The interaction of thymidine, a nucleoside, with hydroxopentaaquarhodium(III), [Rh(H₂O)₅(OH)]²⁺ ion in aqueous medium is reported and the possible mode of binding is discussed. The kinetics of interaction between thymidine and [Rh(H₂O)₅OH]²⁺ has been studied spectrophotometrically as a function of [Rh(H₂O)₅OH²⁺], [thymidine], pH and temperature. The reaction has been monitored at 298 nm, the _max of the substituted complex, and where the spectral difference between the reactant and product is a maximum. The reaction rate increases with [thymidine] and reaches a limiting value at a higher ligand concentration. From the experimental findings an associative interchange mechanism for the substitution process is suggested. The activation parameters (H=47.8 ± 5.7 kJ mol^–1, S=–173 ± 17 J K^–1 mol^–1) supports our proposition. The negative G⁰ (–13.8 kJ mol^–1) for the first equilibrium step also supports the spontaneous formation of the outer sphere association complex.     

Rearrangement ofO-perfluoroisobutenylacetone oxime. The structure of 2,2-bis(trifluoromethyl)-5-methyl-gD4-pyrrolin-3-one

Dehydrofluorination ofO-(-hydroperfluoroisobutyl)acetone oxime affords 2,2-bis(tri-fluoromethyl)-5-methyl-⁴-pyrrolin-3-one; the molecular structure of the latter was unambiguously established by X-ray diffraction method.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 951–953, May, 1994.     

Kinetics and mechanism of ligand substitution of aquopropylenediaminetetraacetato ruthenate(III) in water

Summary The reaction of pentadentate PDTA complex of ruthenium(III) with various sulphur containing ligands such as thiourea and 2-mercaptopyrimidine were studied as a function of pH (1.5–9.0), temperature (30–45°C) and substituting ligand concentration at 0.2 M ionic strength (NaClO₄) in water. The reaction of Ru(PDTA)(H₂O)^– with 2-mercaptopyrimidine proceeds with the formation of a red product (_max=511 nm) which undergoes pH-dependent conversion into a violet product (_max=511 nm). The activation parameters at pH 5 lie in the range 21.9 < H < 28.8 KJ mol^-1 and -120.4 < S < -96.7 J mol^-1deg^-1 and support the operation of an associatively activated ligand substitution. The experiments are discussed with reference to data for the corresponding ethylenediaminetetraacetate complex and the labilisation effect of such chelated ligands.