Mechanistic insight into hydrosilylation reactions catalyzed by high valent ReX (X = O, NAr, or N) complexes: the silane (Si-H) does not add across the metal-ligand multiple bond

Treatment of oxo and imido-rhenium(V) complexes Re(X)Cl3(PR3)2 (X = O, NAr, and R = Ph or Cy) (1-2) with Et3SiH affords Re(X)Cl2(H)(PR3)2 in high yields. Cycloaddition of silane across the ReX multiple bonds is not observed. Two rhenium(V) hydrides (X = O and R = Ph, 4a; X = NMes and R = Ph, 5a) have been structurally characterized by X-ray diffraction. The kinetics of the reaction of Re(O)Cl3(PPh3)2 (1a) with Et3SiH is characterized by phosphine inhibition and saturation in [Et3SiH]. Hence, formation of Re(O)Cl2(H)(PPh3)2 (4a) proceeds via a sigma-adduct followed by heterolytic cleavage of the Si-H bond and transfer of silylium (Et3Si+) to chloride. Oxo and imido complexes of rhenium(V) (1-2) as well as their nitrido analogues, Re(N)Cl2(PR3)2 (3), catalyze the hydrosilylation of PhCHO under ambient conditions, with the reactivity order imido > oxo > nitrido. The isolable oxorhenium(V) hydride 4a reacts with PhCHO to afford the alkoxide Re(O)Cl2(OCH2Ph)(PPh3)2 (6a) with kinetic dependencies that are consistent with aldehyde coordination followed by aldehyde insertion into the Re-H bond. The latter (6a) regenerates the rhenium hydride upon reaction with Et3SiH. These stoichiometric reactions furnish a possible catalytic cycle. However, quantitative kinetic analysis of the individual stoichiometric steps and their comparison to steady-state kinetics of the catalytic reaction reveal that the observed intermediates do not account for the predominant catalytic pathway. Furthermore, for Re(O)Cl2(H)(PCy3)2 and Re(NMes)Cl2(H)(PPh3)2 aldehyde insertion into the Re-H bond is not observed. Therefore, based on the kinetic dependencies under catalytic conditions, a consensus catalytic pathway is put forth in which silane is activated via sigma-adduct formation cis to the ReX bond followed by heterolytic cleavage at the electrophilic rhenium center. The findings presented here demonstrate the so-called Halpern axiom, the observation of "likely" intermediates in a catalytic cycle, generally, signals a nonproductive pathway.     

Multielectron atom transfer reactions of perchlorate and other substrates catalyzed by rhenium oxazoline and thiazoline complexes: reaction kinetics, mechanisms, and density functional theory calculations

The title complexes, the Re(O)L(2)(Solv)(+) complexes (L = hoz, 2-(2'-hydroxyphenyl)-2-oxazoline(-) or thoz, 2-(2'-hydroxyphenyl)-2-thiazoline(-); Solv = H(2)O or CH(3)CN), are effective catalysts for the following fundamental oxo transfer reaction between closed shell molecules: XO + Y --> X + YO. Among suitable oxygen acceptors (Y's) are organic thioethers and phosphines, and among suitable oxo donors (XO's) are pyridine N-oxide (PyO), t-BuOOH, and inorganic oxyanions. One of the remarkable features of these catalysts is their high kinetic competency in effecting perchlorate reduction by pure atom transfer. Oxo transfer to rhenium(V) proceeds cleanly to afford the cationic dioxorhenium(VII) complex Re(O)(2)L(2)(+) in a two-step mechanism, rapid substrate (XO) coordination to give the precursor adduct cis-Re(V)(O)(OX)L(2)(+) followed by oxygen atom transfer (OAT) as the rate determining step. Electronic variations with PyO derivatives demonstrated that electron-withdrawing substituents accelerate the rate of Re(VII)(O)(2)L(2)(+) formation from the precursor adduct cis-Re(V)(O)(OX)L(2)(+). The activation parameters for OAT with picoline N-oxide and chlorate have been measured; the entropic barrier to oxo transfer is essentially zero. The potential energy surface for the reaction of Re(O)(hoz)(2)(OH(2))(+) with PyO was defined, and all pertinent intermediates and transition states along the reaction pathway were located by density functional theory (DFT) calculations (B3LYP/6-31G). In the second half of the catalytic cycle, Re(O)(2)L(2)(+) reacts with oxygen acceptors (Y's) in second-order reactions with associative transition states. The rate of OAT to substrates spans a remarkable range of 0.1-10(6) L mol(-)(1) s(-)(1), and the substrate reactivity order is Ph(3)P > dialkyl sulfides > alkyl aryl sulfides > Ph(2)S approximately DMSO, which demonstrates electrophilic oxo transfer. Competing deactivation and inhibitory pathways as well as their relevant kinetics are also reported.     

Hydrolysis, hydrosulfidolysis, and aminolysis of imido(methyl)rhenium complexes

The tris(imido)methylrhenium complex CH3Re(NAd)3 (1a, Ad = 1-adamantyl) reacts with H2O to give CH3Re(NAd)2O (2a) and AdNH2. The resulting di(imido)oxo species can further react with another molecule of H2O to generate CH3Re(NAd)O2 (3a). The kinetics of these reactions have been studied by means of 1H NMR and UV-vis spectroscopies. The second-order rate constant for the reaction of 1a with H2O at 298 K in C6H6 is 3.3 L mol-1 s-1, which is much larger than the value 1 x 10(-4) L mol-1 s-1 obtained for the reaction between CH3Re(NAr)3 (1b, Ar = 2,6-diisopropylphenyl) and H2O in CH3CN at 313 K. Both 1a and 1b react with H2S to produce the rhenium(VII) sulfide, (CH3Re(NR)2)2(mu-S)2 (4a, R = Ad; 4b, R = Ar), with second-order rate constants of 17 and 1.6 x 10(-4) L mol-1 s-1 in C6H6 and CH3CN, respectively. Complex 4b has been structurally characterized. The crystal data are as follows: space group C2/c, a = 30.4831 (19) A, b = 10.9766 (7) A, c = 18.1645 (11) A, beta = 108.268(1) degrees, V = 5771.5 (6) A3, Z = 4. The reaction between CH3Re(NAr)2O (2b) and H2S also yields the dinuclear compound 4b. Unlike 1b, 1a reacts with aniline derivatives to give mixed imido rhenium complexes.     

Kinetics and mechanisms of catalytic oxygen atom transfer with oxorhenium(V) oxazoline complexes

The rhenium(V) monooxo complexes (hoz)2Re(O)Cl (1) and [(hoz)2Re(O)(OH2)][OTf] (2) have been synthesized and fully characterized (hoz = 2-(2'-hydroxyphenyl)-2-oxazoline). A single-crystal X-ray structure of 2 has been solved: space group = P1, a = 13.61(2) A, b = 14.76(2) A, c = 11.871(14) A, alpha = 93.69(4) degrees, beta = 99.43(4) degrees, gamma = 108.44(4) degrees, Z = 4; the structure was refined to final residuals R = 0.0455 and Rw = 0.1055. 1 and 2 catalyze oxygen atom transfer from aryl sulfoxides to alkyl sulfides and oxygen-scrambling between sulfoxides to yield sulfone and sulfide. Superior catalytic activity has been observed for 2 due to the availability of a coordination site on the rhenium. The active form of the catalyst is a dioxo rhenium(VII) intermediate, [Re(O)2(hoz)2]+ (3). In the presence of sulfide, 3 is rapidly reduced to [Re(O)(hoz)2]+ with sulfoxide as the sole organic product. The transition state is very sensitive to electronic influences. A Hammett correlation plot with para-substituted thioanisole derivatives gave a reaction constant rho of -4.6 +/- 0.4, in agreement with an electrophilic oxygen transfer from rhenium. The catalytic reaction features inhibition by sulfides at high concentrations. The equilibrium constants for sulfide binding to complex 2 (cause of inhibition), K2 (L x mol(-1)), were determined for a few sulfides: Me2S (22 +/- 3), Et2S (14 +/- 2), and tBu2S (8 +/- 2). Thermodynamic data, obtained from equilibrium measurements in solution, show that the S=O bond in alkyl sulfoxides is stronger than in aryl sulfoxides. The Re=O bond strength in 3 was estimated to be about 20 kcal x mol(-1). The high activity and oxygen electrophilicity of complex 3 are discussed and related to analogous molybdenum systems.     

Concurrent Stabilization of π‐Donor and π‐Acceptor Ligands in Aromatized and Dearomatized Pincer [(PNN)Re(CO)(O)2] Complexes

Aromatized cationic [(PNN)Re(π acid)(O)₂]⁺ ( 1 ) and dearomatized neutral [(PNN*)Re(π acid)(O)₂] ( 2 ) complexes (where π acid=CO ( a ), tBuNC ( b ), or (2,6‐Me₂)PhNC ( c )), possessing both π‐donor and π‐acceptor ligands, have been synthesized and fully characterized. Reaction of [(PNN)Re(O)₂]⁺ ( 4 ) with lithiumhexamethyldisilazide (LiHMDS) yield the dearomatized [(PNN*)Re(O)₂] ( 3 ). Complexes 1 and 2 are prepared from the reaction of 4 and 3 , respectively, with CO or isocyanides. Single‐crystal X‐ray structures of 1 a and 1 b show the expected trans‐dioxo structure, in which the oxo ligands occupy the axial positions and the π‐acidic ligand occupies the equatorial plane in an overall octahedral geometry about the rhenium(V) center. DFT studies revealed the stability of complexes 1 and 2 arises from a π‐backbonding interaction between the d_xy orbital of rhenium, the π orbital of the oxo ligands, and the π* orbital of CO/isocyanide.     

Mechanism for the activation of carbon monoxide via oxorhenium complexes

Activation of CO by the rhenium(V) oxo complex [(DAAm)Re(O)(CH(3))] (1) [DAAm = N,N-bis(2-arylaminoethyl)methylamine; aryl = C(6)F(5), Mes] resulted in the isolation of the rhenium(III) acetate complex [(DAAm)Re(O(2)CCH(3))(CO)] (3). The mechanistic details of this reaction were explored experimentally. The novel oxorhenium(V) acyl intermediate [(DAAm)Re(O)(C(O)CH(3))] (2) was isolated, and its reactivity with CO was investigated. An unprecedented mechanism is proposed: CO is activated by the metal oxo complex 1 and inserted into the rhenium-methyl bond to yield acyl complex 2, after which subsequent migration of the acyl ligand to the metal oxo ligand yields acetate complex 3. X-ray crystal structures of 2 and 3 are reported.     

Regioselective and reversible carbon-nitrogen bond formation: synthesis, structure and reactivity of ureato-bridged complexes [Mo2(NAr)2(mu-X){mu-ArNC(O)NAr}(S2CNR2)2](Ar = Ph, p-tol; X = S, NAr; R = Me, Et, Pr)

Reaction of ArNCO with syn-[MoO(mu-O)(S2CNR2)]2 or syn-[MoO(mu-NAr)(S2CNR2)]2 at 110 degrees C leads to the facile formation of bridging ureato complexes [Mo2(NAr)2(mu-NAr){mu-ArNC(O)NAr}(S2CNR2)2](Ar = Ph, p-tol; R = Me, Et, Pr), formed upon substitution of all oxo ligands and addition of a further equivalent of isocyanate across one of the bridging imido ligands. Related sulfido-bridged complexes [Mo2(NAr)2(mu-S){mu-ArNC(O)NAr}(S2CNR2)2] have been prepared from syn-[Mo2O2(mu-O)(mu-S)(S2CNR2)2]. When reactions with syn-[MoO(mu-NAr)(S2CNEt2)]2 were followed by NMR, intermediates were observed, being formulated as [Mo2O(NAr)(mu-NAr){mu-ArNC(O)NAr}(S2CNEt2)2], which at higher temperatures convert to the fully substituted products. A crystallographic study of [Mo2(N-p-tol)2(mu-S){mu-p-tolNC(O)N-p-tol}(S2CNPr2)2] reveals that the bridging ureato ligand is bound asymmetrically to the dimolybdenum centre-molybdenum-nitrogen bonds trans to the terminal imido ligands being significantly elongated with respect to those cis-a result of the trans-influence of the terminal imido ligands. This trans-influence also leads to a trans-effect, whereby the exchange of aryl isocyanates can occur in a regioselective manner. This is followed by NMR studies and confirmed by a crystallographic study of [Mo2(N-p-tol)2(mu-N-p-tol){mu-p-tolNC(O)NPh}(S2CNEt2)2]--the PhNCO occupying the site trans to the terminal imido ligands. Ureato complexes also react with PhNCS, initially forming [Mo2(NAr)2(mu-S){mu-ArNC(O)NAr}(S2CNR2)2], resulting from exchange of the bridging imido ligand for sulfur, together with small amounts of [Mo2(NAr)2(mu-S)(mu-S2)(S2CNEt2)2], containing bridging sulfide and disulfide ligands. The ureato complexes [Mo2(NAr)2(mu-S){mu-ArNC(O)NAr}(S2CNR2)2] react further with PhNCS to give [Mo2(NAr)2(mu-S)2(S2CNR2)2]n (n = 1, 2), which exist in a dimer-tetramer equilibrium. In order to confirm these results crystallographic studies have been carried out on [Mo2(N-p-tol)2(mu-S)(mu-S2)(S2CNEt2)2] and [Mo2(N-p-tol)2(mu-S)2(S2CNPr2)2]2.     

Observation of inductive effects that cause a change in the rate-determining step for the conversion of rhenium azides to imido complexes

The cationic oxorhenium(V) complex [Re(O)(hoz)(2)(CH(3)CN)][B(C(6)F(5))(4)] [1; Hhoz = 2-(2'-hydroxyphenyl)-2-oxazoline] reacts with aryl azides (N(3)Ar) to give cationic cis-rhenium(VII) oxoimido complexes of the general formula [Re(O)(NAr)(hoz)(2)][B(C(6)F(5))(4)] [2a-2f; Ar = 4-methoxyphenyl, 4-methylphenyl, phenyl, 3-methoxyphenyl, 4-chlorophenyl, and 4-(trifluoromethyl)phenyl]. The kinetics of formation of 2 in CH(3)CN are first-order in both azide (N(3)Ar) and oxorhenium(V) complex 1, with second-order rate constants ranging from 3.5 × 10(-2) to 1.7 × 10(-1) M(-1) s(-1). A strong inductive effect is observed for electron-withdrawing substituents, leading to a negative Hammett reaction constant ρ = -1.3. However, electron-donating substituents on phenyl azide deviate significantly from this trend. Enthalpic barriers (ΔH(?)) determined by the Eyring-Polanyi equation are in the range 14-19 kcal mol(-1) for all aryl azides studied. However, electron-donating 4-methoxyphenyl azide exhibits a large negative entropy of activation, ΔS(?) = -21 cal mol(-1) K(-1), which is in sharp contrast to the near zero ΔS(?) observed for phenyl azide and 4-(trifluoromethyl)phenyl azide. The Hammett linear free-energy relationship and the activation parameters support a change in the mechanism between electron-withdrawing and electron-donating aryl azides. Density functional theory predicts that the aryl azides coordinate via N(α) and extrude N(2) directly. For the electron-withdrawing substituents, N(2) extrusion is rate-determining, while for the electron-donating substituents, the rate-determining step becomes the initial attack of the azide. The barriers for these two steps are inverted in their order with respect to the Hammett σ values; thus, the Hammett plot appears with a break in its slope.     

Investigation of mixed oxidation state cyanide-bridged Re(V)oxo (acac(2)en/pn) and Re(I)(bipy)(CO)3 complexes

A series of cyanide-bridged complexes that combine a low-valent photoacceptor rhenium(I) metal center with an electroactive midvalent rhenium(V) complex were prepared. The synthesis involved the preparation of novel asymmetric rhenium(V) oxo compounds, cis-Re(V)O(CN)(acac(2)en) (1) and cis-Re(V)O(CN)(acac(2)pn) (2), formed by reacting trans-[Re(V)O(OH(2))(acac(2)en)]Cl or trans-Re(V)O(acac(2)pn)Cl with [NBu(4)][CN]. The μ-bridged cyanide mixed-oxidation Re(V)-Re(I) complexes were prepared by incubating the asymmetric complexes, 1 or 2, with fac-[Re(I)(bipy)(CO)(3)][OTf] to yield cis-[Re(V)O(acac(2)en)(μ-CN-1κC:2κN)-fac-Re(I)(bipy)(CO)(3)][PF(6)] (3) and [cis-Re(V)O(acac(2)pn)(μ-CN-1κC:2κN)-fac-Re(I)(bipy)(CO)(3)][PF(6)] (4), respectively.     

Mechanism for reduction catalysis by metal oxo: hydrosilation of organic carbonyl groups catalyzed by a rhenium(V) oxo complex

The rhenium oxo complex [Re(O)(hoz)2][TFPB], 1 (where hoz = 2-(2'-hydroxyphenyl)-2-oxazoline(-) and TFPB = tetrakis(pentafluorophenyl)borate) catalyzes the hydrosilation of aldehydes and ketones under ambient temperature and atmosphere. The major organic product is the protected alcohol as silyl ether. Isolated yields range from 86 to 57%. The reaction requires low catalyst loading (0.1 mol %) and proceeds smoothly in CH2Cl2 as well as neat without solvent. In the latter condition, the catalyst precipitates at the end of reaction, allowing easy separation and catalyst recycling. Re(O)(hoz)(H), 3, was prepared, and its involvement in an ionic hydrosilation mechanism was evaluated. Complex 3 was found to be less hydridic than Et3SiH, refuting its participation in catalysis. A viable mechanism that is consistent with experimental findings, rate measurements, and kinetic isotope effects (Et3SiH/Et3SiD = 1.3 and benzaldehyde-H/benzaldehyde-D = 1.0) is proposed. Organosilane is activated via eta2-coordination to rhenium, and the organic carbonyl adds across the coordinated Si-H bond [2 + 2] to afford the organic reduction product.     

Rhenium oxohalides: synthesis and crystal structures of ReO3Cl(THF)2, ReOCl4(THF), Re2O3Cl6(THF)2, and Re2O3Cl6(H2O)2

Convenient methods to prepare solvated rhenium oxochlorides are described; these compounds should serve as useful starting materials for rhenium chemistry. Treatment of perrhenic acid, HReO(4), with chlorotrimethylsilane or with thionyl chloride, followed by addition of tetrahydrofuran, forms the new oxochloride complexes ReO(3)Cl(THF)(2) and ReOCl(4)(THF), respectively. Small amounts of two dinuclear oxochlorides, which evidently resulted from adventitious hydrolysis, were also isolated: Re(2)O(3)Cl(6)L(2), where L = THF or H(2)O. All four compounds were characterized by X-ray crystallography. The rhenium(vii) complex ReO(3)Cl(THF)(2) adopts a distorted octahedral geometry in which the three oxo ligands are in a facial arrangement; the rhenium(vi) complex ReOCl(4)(THF) adopts a trans octahedral structure. The two dinuclear rhenium(vi) compounds both have a single, nearly linear, bridging oxo group; on each Re center, the three terminal chlorides adopt a mer arrangement, and the terminal oxo and the coordinated Lewis base are mutually trans. The water ligand in the aqua complex is hydrogen bonded to nearby THF molecules. IR data are given.     

Rhenium and technetium complexes with tridentate N-[(N',N'-dialkylamino)(thiocarbonyl)]-N'-substituted benzamidine ligands

N-[(Dialkylamino)(thiocarbonyl)]benzimidoyl chlorides react with functionalized amines such as 2-aminophenol, 2-methylaminopyridine, and 2-aminobenzoic acid in clean and high-yield procedures with the formation of the novel tridentate N-[(N', N'-dialkylamino)(thiocarbonyl)]- N'-substituted benzamidine ligands H2L1, HL2, and H2L3. By starting from (NBu4)[MOCl4] (M = Re, Tc) or [ReOCl3(PPh3)2] and H2L1, a series of oxorhenium(V) and oxotechnetium(V) complexes of the composition [MOCl(L1)] were synthesized and characterized by spectroscopic methods and X-ray crystallography. The monomeric, five-coordinate compounds are air-stable and bind (L1)(2-) tridentate in the equatorial coordination sphere. Dimeric products of the compositions [(ReOCl(L2))2O] and [ReOCl(L3)]2 were isolated during reactions with HL2 and H2L3. While dimerization in [(ReOCl(L2))2O] is established via an oxo bridge, the metal atoms in [ReOCl(L3)]2 are connected by the carboxylic group of the ligand, and the product represents the first example of a high-oxidation state rhenium complex displaying such a bonding feature.     

Kinetic and mechanistic studies of sulfur transfer from imidomethylrhenium sulfides

The bis(2,6-diisopropylphenylimido)methylrhenium(VII) sulfide dimer, [CH(3)Re(NAr)(2)](2)(mu-S)(2) (1), reacts with a 1:1 amount of a phosphine or an alkyl isocyanide to yield a dimeric rhenium(VI) species, [CH(3)Re(NAr)(2)](2)(mu-S) (2), which has been structurally characterized. The two rhenium atoms in 2 are within bonding distance, 280 pm, more than 90 pm shorter than in 1. With excess L, 1 reacts to give a monomeric rhenium(V) complex, CH(3)Re(NAr)(2)L(2) (3A, L = PZ(3), Z = alkyl, aryl; 3B, L = isocyanide). The rate of formation of 3A is first-order with respect to [1] and second-order with respect to monodentate phosphine concentrations. With bidentate phosphines, however, the order with respect to the phosphine drops to unity. The addition of another (nonoxidizable) coordinating ligand, such as pyridine or one of its derivatives, accelerates the formation of 3A. In the presence of a pyridine ligand the reaction is first-order with respect to phosphine concentration, both monodentate and bidentate. The reactions between phosphines and 2 are slower than those with 1, which excludes [CH(3)Re(NAr)(2)](2)(mu-S) from being the intermediate in the reactions of 1. To account for that, we have proposed an intervening species that partitions between transformation to 3 with excess L and to 2 otherwise.     

A series of [3 + 2] cycloaddition products from the reaction of rhenium oxo complexes with diphenyl ketene

The reaction of rhenium (VII) trioxo complexes containing the ligand sets scorpionate, [HB(pz)3]ReO3 (6), [Ph-B(pz)3]ReO3 (7), and [[HC(pz)3]ReO3][ReO4] (8) and pyridine/pyridine-type ligands [(4,7-diphenyl-1,10-phen)(Br)ReO3] (12), [(4,4'-di-tert-butyl-2,2'-dipyridyl)(Cl)ReO3] (13), and [(py)2Re(Cl)O3] (4), with diphenyl ketene, has led to the isolation of six novel [3 + 2] cycloaddition products. These air-stable solids 9-11 and 15-17 are the result of [3 + 2] addition of the O=Re=O motif across the ketene C=C double bond. Five of the six [3 + 2] cycloaddition products have been structurally characterized by single-crystal X-ray diffraction and in all cases by 13C NMR and IR spectroscopies.     

Chemistry of the rhenium-azopyridine family: an oxo parent and derivatives thereof including a novel oxo-imido dimer

The concerned azo ligands are 2-(phenylazo)pyridine (HL) and 2-((p-chlorophenyl)azo)pyridine (ClL). The reaction of KReO4 with HL in hot concentrated HCl is attended with metal reduction and ligand chlorination affording the oxo complex ReVOCl3(ClL), 2, which furnishes ReIII(OPPh3)Cl3(ClL), 3, upon treatment with PPh3. Aromatic amines, ArNH2, convert 2 to the imido complex ReV(NAr)Cl3(ClL), 5, and the unusual oxo-imido dimer (ClL)-Cl2(O)ReVOReV(NAr)Cl2(ClL), 7. The complex ReIII(OPPh3)Cl3(HL), 4, has been generated from ReVOCl3(PPh3)2 and HL. Reaction of 4 with HL has yielded ReV(NPh)Cl3(HL), 6, via azo splitting. The complexes have been characterized with the help spectral, magnetic, and X-ray structural data (2, 3, 5c (Ar = pClC6H4) and 7.CH2Cl2 (Ar = pMeC6H4)). In 2, 3, and 5c the ReCl3 fragment is meridionally disposed, and in 7 the ReCl2 fragments have a trans configuration. The Re-O(oxo) bond, 1.663(6) A, in 2 and Re-N(imido) bond, 1.719(5) A, in 5c are triple bonds. The corresponding bonds are slightly longer in 7 wherein the (O)Re(1)-O(2)-Re(2)(NAr) bridge is angular (151.0(5) degrees) and unsymmetrical, the Re(1)-O(2) bond, 1.849(7) A, having a large double-bond character (Re(2)-O(2), 1.954(7) A). In effect, cis-ReVO2 acts as a monodentate oxygen ligand toward ReVNAr in 7. In all cases the pyridine nitrogen binds trans to the oxo, OPPh3, or NAr donor. Bond length data are consistent with the presence of substantial d(Re)-pi*(azo) back-bonding. In acetonitrile solution the complexes display electrochemical one-electron metal (ReVI/ReV or ReIV/ReIII) and azo redox. The imido ligand in 5 stabilizes the ReVI state (E1/2 approximately 1.4 V) better than the oxo ligand in 2 (approximately 1.9 V). Parallely it is more difficult to reduce the azo group in 5 (approximately -0.4 V) than in 2 (approximately 0.0 V). In 7 the metal (approximately 1.0 V) and azo (approximately -0.4 V) couples correspond to the imido and oxo halves, respectively. The significantly higher (by 0.2-0.6 V) metal reduction potentials of the azopyridine compared to pyridine-2-aldimine complexes is ascribed to the superior pi-acidity and electron-withdrawing character of the azo function relative to the aldimine function. This also makes the transfer of the ReVO oxygen function much more facile under azopyridine chelation as in 2. For the same reason, ReOCl3(PPh3)2 reacts with HL affording only 4 while it reacts with pyridine-2-aldimines furnishing oxo species. Crystal data for the complexes are as follows: 2, empirical formula C11H8Cl4N3ORe, crystal system triclinic, space group P1, a = 7.118(4) A, b = 8.537(4) A, c = 13.231(9) A, alpha = 79.16(5) degrees, beta = 78.03(5) degrees, gamma = 70.96(4) degrees, V = 737.2(7) A3, Z = 2; 3, empirical formula C29H23Cl4N3OPRe, crystal system monoclinic, space group P2(1)/n, a = 11.264(2) A, b = 15.221(3) A, c = 17.628(4) A, beta = 94.21(3) degrees, V = 3014(1) A3, Z = 4; 5c, empirical formula C17H12Cl5N4Re, crystal system triclinic, space group P1, a = 9.683(3) A, b = 10.898(3) A, c = 11.522(3) A, alpha = 63.67(2) degrees, beta = 71.24(2) degrees, gamma = 86.79(2) degrees, V = 1026(1) A3, Z = 2; 7.CH2Cl2, empirical formula C30H25Cl8N7O2Re2, crystal system triclinic, space group P1, a = 12.522(6) A, b = 12.857(8) A, c = 13.182(7) A, alpha = 67.75(4) degrees, beta = 88.30(4) degrees, gamma = 82.09(4) degrees, V = 1945(2) A3, Z = 2.     

Synthesis, structure, and characterization of molybdenum(VI) imido complexes with N-salicylidene-2-aminophenol

Diimido complexes of the type Mo(NAr)2Cl2(dme) (dme = 1,2-dimethoxyethane) react with N-salicylidene-2-aminophenol (sapH2) in methanol in the presence of 2 equiv of triethylamine to form complexes with the general formula Mo(NAr)(1,2-OC6H4NH)(sap). The structures of three of these compounds (NAr = 2,6-dimethylphenylimido (1), 2,4,6-trimethylphenylimido (2), 2-tert-butylphenylimido3) have been determined by X-ray crystallography. The coordination sphere around the Mo is a distorted octahedron. The oxygen from the 2-aminophenol is trans to the imido nitrogen, whereas the amido nitrogen and the tridentate sap occupy the four equatorial positions. The Mo-N-C imido linkages have angles of 167.5(2) degrees (1), 163.2(2) degrees (2), and 162.4(1) degrees (3). A precursor complex to the imido-amido complex, Mo(NAr)(sap)(OCH3)2 (4, NAr = 2,4,6-trimethylphenylimido), has been isolated and characterized. Compound 4 reacts with 2-aminophenol to form 2, with 2-aminothiophenol to form Mo(NAr)(1,2-SC6H4NH)(sap) (5), with catechol to form Mo(NAr)(1,2-OC6H4O)(sap) (6), with naphthalene-2,3-diol to form Mo(NAr)(naphthalene-2,3-diolate)(sap) (7), with 1,2-benzenedithiol to form Mo(NAr)(1,2-SC6H4S)(sap) (8), and with 1,2-phenylenediamine to form Mo(NAr)(1,2-HNC6H4NH)(sap) (9). The structures of compounds 5-9 have been determined by X-ray crystallography. With the exception of compound 8, the structures are similar to those of 1,2, and 3, with the bidentate ligand occupying one axial and one equatorial position. In 8, 1,2-benzendithiolate occupies two equatorial positions, and the nitrogen from sap is located trans to the imido nitrogen. All complexes were characterized by 1H NMR spectroscopy, cyclic voltammetry, and UV-vis spectroscopy. When a solution of 4 is exposed to moisture-containing air, MoO2(sap)(CH3OH) (10) is formed. The structure of 10 was also determined.     

Structural study on 2,2'-(methylimino)bis(N,N-dioctylacetamide) complex with Re(VII)O4- and Tc(VII)O4- by 1H NMR, EXAFS, and IR spectroscopy

The structures of the complex of 2,2'-(methylimino)bis(N,N-dioctylacetamide) (MIDOA) with M(VII)O(4)(-) (M = Re and Tc), which were prepared by liquid-liquid solvent extraction, were investigated by using (1)H nuclear magnetic resonance (NMR), extended X-ray absorption fine structure (EXAFS), and infrared (IR) spectroscopy. The (1)H NMR spectra of the complex of MIDOA with Re(VII)O(4)(-) prepared in the organic solution suggest the transfer of a proton from aqueous to organic solution and the formation of the H(+)MIDOA ion. The EXAFS spectra of the complexes of H(+)MIDOA with Re(VII)O(4)(-) and Tc(VII)O(4)(-) show only the M-O coordination of the aquo complexes, suggesting that the chemical state of M(VII)O(4)(-) was unchanged during the extraction process. The results from (1)H NMR and EXAFS, therefore, provide evidence of M(VII)O(4)(-)···H(+)MIDOA complex formation in the organic solution. The IR spectra of Re(VII)O(4)(-)···H(+)MIDOA and Tc(VII)O(4)(-)···H(+)MIDOA were analyzed based on the structures and the IR spectra that were calculated at the B3LYP/cc-pVDZ level. Comparison of the observed and calculated IR spectra demonstrates that an intramolecular hydrogen bond is formed in H(+)MIDOA, and the M(VII)O(4)(-) ion interacts with H(+)MIDOA through multiple C-H(n)···O hydrogen bonds.     

Synthesis and crystal structure of unprecedented phosphine adducts of d(1)-aryl imido-vanadium(IV) complexes

The reaction of the imido precursor [V(NAr)Cl(2)](n)() (1) (Ar = 2,6-i-Pr(2)C(6)H(3)) with 3 equiv of PMe(2)Ph yields the monomeric complex [V(=NAr)Cl(2)(PMe(2)Ph)(2)] (2). Reacting 1 with 1.5 equiv of dmpe or 1 equiv of dppm affords the dimeric complexes [V(=NAr)Cl(2)(dmpe)](2)(mu-P,P'-dmpe) (3) and [V(=NAr)Cl(2)(dppm)](2) (4), respectively. Complexes 2-4 have been fully characterized by spectroscopic methods, magnetism studies, and X-ray crystallography.     

Synthesis,Characterization, and Reactivity of a Uranium(VI) Carbene Imido Oxo Complex

We report the uranium(VI) carbene imido oxo complex [U(BIPM^TMS)(NMes)(O)(DMAP)₂] ( 5 , BIPM^TMS=C(PPh₂NSiMe₃)₂; Mes=2,4,6‐Me₃C₆H₂; DMAP=4‐(dimethylamino)pyridine) which exhibits the unprecedented arrangement of three formal multiply bonded ligands to one metal center where the coordinated heteroatoms derive from different element groups. This complex was prepared by incorporation of carbene, imido, and then oxo groups at the uranium center by salt elimination, protonolysis, and two‐electron oxidation, respectively. The oxo and imido groups adopt axial positions in a T‐shaped motif with respect to the carbene, which is consistent with an inverse trans‐influence. Complex 5 reacts with tert‐butylisocyanate at the imido rather than carbene group to afford the uranyl(VI) carbene complex [U(BIPM^TMS)(O)₂(DMAP)₂] ( 6 ).     

Chelated hydrazido(3-)rhenium(V) complexes: on the way to the nitrido-M(V) core (M = Tc, Re)

Neutral and asymmetrical hydrazido(3-)rhenium(V) heterocomplexes of the type [Re(eta(2)-L(4))(L(n))(PPh(3))] (eta(2)-L(4) = NNC(SCH(3))S; H(2)L(1) = S-methyl beta-N-((2-hydroxyphenyl)ethylidene)dithiocarbazate, 1, H(2)L(2) = S-methyl beta-N-((2-hydroxyphenyl)methylidene)dithiocarbazate, 2) are prepared via ligand-exchange reactions in ethanolic solutions starting from [Re(V)(O)Cl(4)](-) in the presence of PPh(3) or from [Re(V)(O)Cl(3)(PPh(3))(2)]. The distorted octahedral coordination sphere of these compounds is saturated by a chelated hydrazido group, a facially ligated ONS Schiff base, and PPh(3). Reduction-substitution reactions starting from [NH(4)][Re(VII)O(4)] in acidic ethanolic mixtures containing PPh(3) and H(2)L(n) (or its dithiocarbazic acid precursor H(3)L(4)) produce another example of chelated hydrazido(3-) rhenium(V) derivative, namely [Re(eta(2)-L(4))Cl(2)(PPh(3))(2)], 3. On the contrary, the N-methyl-substituted dithiocarbazic acid H(2)L(3) reacts with perrhenate to give the known nitrido complex [Re(N)Cl(2)(PPh(3))(2)]. Rhenium(V) complexes incorporating the robust eta(2)-hydrazido moiety represent key intermediates helpful for the comprehension of the reaction pathway which generates nitridorhenium(V) species starting from oxo precursors. An essential requirement for the stabilization of such chelated hydrazido-Re(V) units is the triple deprotonation at the hydrazine nitrogens, thereby providing efficient pi-electron circulation in the resulting five-membered ring. The thermal stability of these units is affected by the nature of the anchoring donor, thione sulfur ensuring stronger chelation than nitrogen and oxygen. The eta(2)-hydrazido complexes are characterized by conventional physicochemical techniques, including the X-ray crystal structure determination of 1 and 3.