聚酯纤维与丙烯酸的辐照-过氧化法接枝聚合

聚对苯二甲酸乙二醇酯纤维在空气氛中经γ-射线辐照生成大分子过氧化物,通过联氨-铜离子催化分解生成大分子自由基,在丙烯酸水溶液中进行接枝反应,丙烯酸的接枝率不受介质中氧的影响。根据接枝条件,有一个对接枝最有利的联氨浓度范围。在铜离子浓度0—2.5×10~(-3)克分子/升的实验范围内,接枝率随铜离子浓度而增加。     

Processing of high density polyethylene and poly(ethylene terephthalate) blends

Commercial grades of high density polyethylene, HDPE and waste poly(ethylene terephthalate), PET were melt blended over a wide range of compositions. Effect of ethylene acrylic acid copolymer, EAA, ethylene vinyl acetate copolymer, EVA and maleic anhydride grafted EVA as compatibilizers on rheology and mechanical properties of the blend was studied. EAA was found most suitable compatibilizer.     

Functionalization of Poly[Ethylene Terephthalate) by Means of Glow-Discharge-Initiated Polymerization of Acrylic Acid

Glow-discharge-initiated polymerization of acrylic acid incorporated in poly(ethylene terephthalate) (PET) films was investigated. An increase in polymerization yield with plasma treatment duration and power was found. Polymerization was not confined to the film surface. At high power and long treatment time, polymerization in the bulk of the PET also took place. Water regain and contact angle of the PET-treated films were affected by the presence of poly(acrylic acid) (PAA). The carboxyl groups of the PAA chains incorporated in the PET matrix were utilized for further chemical modification of the PET film. Poly(ethylene glycol) (PEG) was grafted onto PAA by esterification. DSC studies showed the presence of both PAA and PEG in the PET matrix and shed light on the morphology of the multicomponent polymeric system. Free isocyanate groups were introduced into the PET matrix by reacting PAA carboxyl groups with hexamethylene diisocyanate.     

Graft copolymerization kinetics of acrylic acid onto the poly(ethylene terephthalate) surface by atmospheric pressure plasma inducement

After one atmospheric pressure plasma treatment of poly(ethylene terephthalate) (PET) film, acrylic acid (AAc) in aqueous solution was successfully graft‐copolymerized onto PET films. The effects of reaction time, AAc monomer concentration and reaction temperature on grafting behavior of AAc were systematically studied. Possible reaction kinetics of plasma‐induced graft copolymerization, starting from initial hydroperoxide decomposition, were proposed. Through the Arrhenius analysis about graft copolymerization kinetics of AAc monomers on PET surface, it was revealed that the activation energies of decomposition, propagation and termination were 98.4, 63.5, and 17.5 kJ/mol, respectively. The temperature around 80 °C was favorable not only for the formation of oxide radicals through the thermal decomposition of hydroperoxide on PET surface but also for the extension of graft copolymer chain through direct polymer grafting. Poly(acrylic acid) (PAAc) grains grafted onto PET surfaces possessed relatively uniform size and both PAAc grain size and surface roughness increased with increasing the grafting degree of AAc. The increase of grain size with increasing grafting degree results from the possibility of forming long chain graft copolymers and their shielding of reactive sites. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1594–1601, 2008     

Graft Copolymerization of Acrylamide on Swollen poly (Ethylene Terephthalate) Fibers Using Cerium Ammonium Nitrate Initiator

Abstract

In this study the graft copolymerization of acrylamide (AAm) on swollen poly(ethylene terephthalate) (PET) fibers using cerium ammonium nitrate (CeAN) initiator was investigated. Five organic solvents, dimethylsulfoxide (DMSO), morpholine, acetic acid (HAc), n-butanol, and 1,2-dichloroethane (DCE), were used as swelling agents. DMSO was found to be the most suitable swelling agent. Solvent diffusion into the fibers was observed to increase with treatment time and temperature. The optimum graft yield was obtained when fibers were grafted after having been swollen in DMSO for a period of 1 hour at 140°C. Variation of graft yield with polymerization time and temperature, and monomer, initiator, and acid concentrations were investigated. Graft yields were observed to increase initially with polymerization time, then to level off, and were found to increase up to a certain monomer and Ce⁴⁺ concentration, then to decrease slightly. The effect of grafting on such fiber properties as diameter, viscosity, and moisture gain were also investigated.     

Surface modification of non-woven fabric by DC pulsed plasma treatment and graft polymerization with acrylic acid

Direct-current pulsed plasma treatment (DPPT) followed by thermal-induced graft polymerization with acrylic acid (AA) was used to modify poly(ethylene terephthalate)/polyethylene (PET/PE) non-woven fabric (NWF) in this study. The water contact angle of plasma modified NWF decreased sharply with DPPT time in 4 s. The water content of the NWF increased with DPPT time and levelled off after 30 s. Chemical analysis by X-ray photoelectron spectroscopy (XPS) indicated that the surface property of modified NWF could be maintained for more than 8 months under ambient conditions and could be further improved by grafting with acrylic acid. The concentration of AA in PET/PE-g-AA NWF increased both with the monomer concentration and the plasma treatment time. The maximum grafting density was 1.17 μmol/cm² with 40 s DPPT and 20% (w/w) AA. Improved biocompatibility of the modified NWF was confirmed with 3T3 fibroblast cells where cell viability was analyzed by MTT assays. More cells were found to attach to the modified NWF with higher growth rates, indicating that an improvement in surface properties by DPPT followed by graft polymerization of AA is beneficial for cell attachment and growth. A much more uniform cell distribution was found within the modified NWF from confocal laser scanning microscope observations.     

Graft Copolymerization of Methyl Methacrylate onto Poly(Ethylene Terephthalate) Fibers Using Benzoyl Peroxide

Abstract

The graft copolymerization of methyl methacrylate onto poly(ethylene terephthalate) fibers has been studied using benzoyl peroxide as initiator. The grafting reactions were carried out within the 70 to 90°C temperature range, and the variations of graft yield with monomer and initiator concentrations were also investigated. The overall activation energy for grafting was calculated as 34.1 kcal/mol. The results of dyeability with the disperse dye suggested that diffusion into the fiber structure was moderately difficult when the graft yield reached 14?15%. The maximum graft yield was obtained at a benzoyl peroxide concentration of 4.00 × 10^?3 M. The decomposition temperature values obtained from thermogravimetric analysis show that the thermal stability of poly(ethylene terephthalate) fibers decreased as a result of grafting. Further, such change in the properties of methyl methacrylate grafted fibers as density, diameter, and moisture regain were also determined.     

Preparation and characterization of proton exchange membrane by UV photografting technique

Journal of Solid State Electrochemistry - Ultraviolet (UV)-induced graft copolymerization of glycidyl methacrylate GMA onto poly(ethylene terephthalate) (PET) films and the subsequent sulfonation...     

Sequential analysis of polyesters by stepwise chemical degradation: Preparation of degradation products

Model reactions for the sequential analysis of polyesters, especially those of the poly(ethylene terephthalate) and poly(butylene terephthalate) type, by stepwise chemical degradation were performed. The cyclic degradation products, containing the reagent and an ethylene terephthalate or butylene terephthalate unit, terephthalic acid mono(2-{o{N-<N′-[4-(iminomethyl-) benzoyl-]> 2′-(imino)ethoxycarbonyl-}iminobenzoyl-} oxyalkyl) ester N″-lactams, were deliberately synthesized.     

Water-soluble hydrogen-bonding interpolymer complex formation between poly(ethylene glycol) and poly(acrylic acid) grafted with poly(2-acrylamido-2-methylpropanesulfonic acid)

Comb-type copolymers of poly(acrylic acid) grafted with poly(2-acrylamido-2-methylpropanesulfonic acid) (PAMPSA) side chains form with poly(ethylene glycol), at low pH, water-soluble hydrogen-bonding interpolymer complexes. Turbidimetry, viscometry, and dynamic light scattering measurements suggest that compact, negatively charged, colloidal nanoparticles are formed at pH<3.75. The influence of the structure of the graft copolymers and of the ionic strength of the solution on the size of these nanoparticles was investigated. It was found that their hydrodynamic radius decreases by increasing the molecular mass of the PAMPSA side chains of the graft copolymer and increases with increasing the ionic strength of the solution.     

Double plasma treatment-induced graft polymerization of carbohydrated monomers on poly(ethylene terephthalate) fibers

This study deals with the grafting of carbohydrate monomers on poly(ethylene terephthalate) fibers by double argon plasma treatment. Two monomers were used: allyl alpha-D-galactopyranoside and 2-methacryloxyethyl glucoside. The quantity of grafted carbohydrates was determined by phenol/sulfuric acid colorimetric titration. The graft density was observed to vary according to the monomer used. Allyl alpha-D-galactopyranoside yields to smaller graft densities compared to 2-methacryloxyethyl glucoside, suggesting transfer reactions occurring at the surface with allyl alpha-D-galactopyranoside. Fibers with the highest graft levels were obtained with the higher monomer concentration and the lower quantity of fiber treated in a plasma reactor. The grafting density can be modulated by the monomer concentration and mass of fiber exposed in the plasma reactor. For 0.5 mg of fibers, the graft densities for 23 and 68 mM allyl alpha-D-galactopyranoside are, respectively, 18 and 35 nmol/cm2. For 0.5 mg of fibers, the graft densities for 19 and 38 mM 2-methacryloxyethyl glucoside are, respectively, 150 and 250 nmol/cm2. Comparative study without the preactivation treatment shows the efficiency of the preactivation: for a mass of fiber of 0.5 mg and a 2-methacryloxyethyl glucoside concentration of 38 mM, the grafting density without plasma pretreatment is 38 nmol/cm2. Attenuated total reflectance Fourier transform infrared spectra confirmed the anchoring of the glycopolymer onto the poly(ethylene terephthalate) surfaces. Atomic force microscopy and scanning electronic microscopy pictures indicated their morphological changes.     

Hydrogen-bonding-driven self-assembly of PEGylated organosilica nanoparticles with poly(acrylic acid) in aqueous solutions and in layer-by-layer deposition at solid surfaces

PEGylated organosilica nanoparticles have been synthesized through self-condensation of (3-mercaptopropyl)trimethoxysilane in dimethyl sulfoxide into thiolated nanoparticles with their subsequent reaction with methoxypoly(ethylene glycol) maleimide. The PEGylated nanoparticles showed excellent colloidal stability over a wide range of pH in contrast to the parent thiolated nanoparticles, which have a tendency to aggregate irreversibly under acidic conditions (pH < 3.0). Due to the presence of a poly(ethylene glycol)-based corona, the PEGylated nanoparticles are capable of forming hydrogen-bonded interpolymer complexes with poly(acrylic acid) in aqueous solutions under acidic conditions, resulting in larger aggregates. The use of hydrogen-bonding interactions allows more efficient attachment of the nanoparticles to surfaces. The alternating deposition of PEGylated nanoparticles and poly(acrylic acid) on silicon wafer surfaces in a layer-by-layer fashion leads to multilayered coatings. The self-assembly of PEGylated nanoparticles with poly(acrylic acid) in aqueous solutions and at solid surfaces was compared to the behavior of linear poly(ethylene glycol). The nanoparticle system creates thicker layers than the poly(ethylene glycol), and a thicker layer is obtained on a poly(acrylic acid) surface than on a silica surface, because of the effects of hydrogen bonding. Some implications of these hydrogen-bonding-driven interactions between PEGylated nanoparticles and poly(acrylic acid) for pharmaceutical formulations are discussed.     

Small-angle neutron scattering from typical synthetic and biopolymer solutions

Small-angle neutron scattering (SANS) has been used to investigate the solution properties of four model polymers, two poly-amino acids [poly(lysine) and poly(proline)], and two water-soluble synthetic polymers [poly(acrylic acid) and poly(ethylene oxide)]. In each case, one of the two polymers is charged, while the other is neutral. SANS measurements were made in the semi-dilute concentration regime in two different solvents [d-water and d-ethylene glycol]. The scattering signals were decomposed into low-Q clustering and high-Q solvation contributions. The temperature dependence of the scattering parameters was determined for poly(lysine) and poly(ethylene oxide) solutions over the temperature range of 13 to 82 °C. Analysis of the SANS spectra revealed that with increasing temperature, the solvation intensity increased in both solvents, while the clustering intensity increased in d-water and decreased in d-ethylene glycol. Significant differences were observed between the SANS spectra of charged and neutral polymer solutions. However, biopolymers and synthetic polymers exhibited qualitatively similar behavior.     

Microwave assisted hydroxyalkylamidation of poly(ethylene‐co‐acrylic acid) and formation of grafted poly(ϵ‐caprolactone) side chains

The microwave assisted amidation of poly(ethylene‐co‐acrylic acid) (PEAA) with 2‐(2‐aminoethoxy)ethanol was performed to yield a hydroxy functionalized poly(ethylene) based copolymer (PEAAOH) in a single step. PEAAOH was used as a polyinitiator for the ring‐opening polymerization of ε‐caprolactone. The obtained graft copolymers were studied via ¹H NMR spectroscopy, gel permeation chromatography, differential scanning calorimetry, polarized optical microscopy, and scanning electron microscopy. Microscopy methods show a crystallization behavior of banded spherulites. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3659–3667, 2007     

Photo-grafting Poly(acrylic acid) onto Poly(lactic acid) Chains in Solution

Poly(lactic acid)(PLA)is one of the most important bio-plastics,and chemical modification of the already-polymerized poly(lactic acid)chains may enable optimization of its material properties and expand its application areas.In this study,we demonstrated that poly(lactic acid)can be readily dissolved in acrylic acid at room temperature,and acrylic acid can be graft-polymerized onto poly(lactic acid)chains in solution with the help of photoinitiator benzophenone under 254 nm ultraviolet(UV)irradiation.Similar photo-grafting polymerization of acrylic acid(PAA)has only been studied before in the surface modification of polymer films.The graft ratio could be controlled by various reaction parameters,including irradiation time,benzophenone content,and monomer/polymer ratios.This photo-grafting reaction resulted in high graft ratio(graft ratio PAA/PLA up to 180%)without formation of homopolymers of acrylic acid.When the PAA/PLA graft ratio was higher than 100%,the resulting PLA-g-PAA polymer was found dispersible in water.The pros and cons of the photo-grafting reaction were also discussed.     

Conducting polymer films fabricated by oxidative graft copolymerization of aniline on poly(acrylic acid) grafted poly(ethylene terephthalate) surfaces

A conductive polyaniline/poly(ethylene terephthalate) (PANI/PET) composite film was fabricated via the oxidative graft copolymerization of aniline (ANI) onto the plasma-induced poly(acrylic acid) (PAAc) grafted PET surface. The attenuated total reflectance Fourier transform infrared spectroscopy spectra (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS) results confirmed that PANI was successfully grafted onto the surface of the PAAc-g-PET films. The effects of the experimental conditions on the percentage of PANI grafted onto the PAAc-g-PET films were extensively investigated. A very high grafting percentage of ANI can be obtained through the acid-base reaction between the aniline monomer and PAAc on the PAAc-g-PET surface at high temperature. As a result, the grafting percentage of PANI can be increased to as high as 12.18 wt %, which causes the surface resistance of the PANI-g-PAAc-g-PET film to be reduced to about 1000 Omega/sq. We predicted that this is because of the high flexibility of the PAAc molecular chains and high solubility of aniline, both of which facilitate the binding of aniline to PAAc during this high temperature acid-base reaction. It was observed by atomic force microscopy (AFM) that the PANI-modified PET surface exhibits higher size irregularity and surface roughness, which further indicated that a much greater number of aniline molecules can be reactively bonded to and distributed along the grafted AAc chains and that the PANI-g-PAAc-g-PET surface resulting from the sequential oxidative graft copolymerization can possess higher electrical conductivity.     

pH responsive adhesion of phospholipid vesicle on poly(acrylic acid) cushion grafted to poly(ethylene terephthalate) surface

Polymer-supported lipid bilayer is a key enabling technology for the design and fabrication of novel biomimetic devices. To date, the physical driving force underlying the formation of polymer-supported lipid bilayer remains to be determined. In this study, the interaction between dipalmitoylphosphocholine (DPPC) vesicle and poly(ethylene terephthalate) [PET] surface with or without grafted poly(acrylic acid) [PAA] layer is examined with several biophysical techniques. First, vesicle deformation analysis shows that the geometry of adherent vesicle on either plain PET or PAA-grafted PET surface is best described by a truncated sphere model. At neutral pH, the degree of deformation and adhesion energy are unaltered by the grafted polymerization of acrylic acid on PET surface. Interestingly, the average magnitude of adhesion energy is increased by 185% and −43% on PAA-grated PET and plain PET surface, respectively, towards an increase of pH at room temperature. Our results demonstrate the possibility of tuning the adhesive interaction between vesicle and polymer cushion through the control of polyelectrolyte ionization on the solid support.     

pH-Responsive Self-assembled Nanoparticles of Simulated P(AA-co-SA)-g-PEG for Drug Release

Simulated graft copolymer of poly(acrylic acid-co-stearyl acylate) [P(AA-co-SA)] and poly(ethylene glycol) (PEG) was synthesized, where acrylic acid, stearyl acylate and PEG was employed as the pH-sensitive, hydrophobic and hydrophilic segment, respectively. Polymeric nanoparticles prepared by the dialysis of simulated graft copolymer solution in dimethylformamide against citrate buffer solution with different pH values were characterized by transmission electron microscopy (TEM), fluorescence technique and laser light scattering (LLS). TEM image revealed the spherical shape of the self-aggregates, which was further confirmed by LLS measurements. The critical aggregation concentration increased markedly (10 to 150 mg/L) with increasing pH (4.6 to 7.0), consistent with the de-protonation of carboxylic groups at higher pH. The hydrodynamic radius of polymeric nanoparticles decreased from 118 nm at pH 3.4 to 90 nm at pH 7.0. The controlled release of indomethacin from those nanoparticles was investigated, and the self-assembled nanoparticles exhibited improved performance in controlled drug release.     

Grafting of poly(acrylic acid) onto nonporous glass bead surfaces

The surface of glass beads were modified with covalently bonded poly(acrylic acid). The optimum reaction conditions were determined to graft poly(acrylic acid) effectively onto the glass surface. The dependence of the graft polymer molecular weight, grafting percentage and monomer weight conversion based on these reaction conditions were consistent with free radical kinetics. Grafting efficiency for azobisisobutyronitrile was more complex compared with the benzyl peroxide initiator system © 1997 John Wiley & Sons, Ltd.     

Branching and cross-linking of poly(ethylene terephthalate) and its foaming properties

The branching and cross-linking of poly(ethylene terephthalate) were investigated using two chain extenders: glycidyl methacrylate-styrene copolymer (GS) and poly(butylene terephthalate)-GS (PBT-GS) in order to improve the melt viscosity and melt strength of poly(ethylene terephthalate). An obvious increase in torque evolution associated with chain extending, branching and cross-linking was observed during the process. The properties of modified poly(ethylene terephthalate) were characterized by intrinsic viscosity and insoluble content measurements, rheological and thermal analysis. The intrinsic viscosity and rheological properties of modified PET were improved significantly when using PBT-GS, indicating that PBT-GS should be a better chain extender. Good foaming of poly(ethylene terephthalate) materials were obtained using supercritical CO₂ as blowing agent. The average cell diameter and cell density were 61 μm and 1.8 × 10⁸ cells/cm³, respectively.