Separation of Y from Sr by zirconium vanadate gel ion-exchanger sorbent: kinetics and thermodynamic study

A new zirconium vanadate (Zr–V) ion-exchanger was synthesized and characterized for fast and selective separation procedure of ⁹⁰Y from ⁸⁹Sr. The method was based on ⁹⁰Y(III) sorption from aqueous HCl solution containing ⁸⁹Sr(II) onto Zr–V gel exchanger. The kinetics of Y(III) sorption from HCl solution by Zr–V exchanger was subjected to Weber–Morris, Lagergren, Bhattacharya and Venkobachar, and Bt models. Initially, the uptake of Y(III) onto the exchanger was fast followed by kinetically first-order sorption with an overall rate constant, K _Lager = (3.55 ± 0.03) × 10^?4 min^?1. Film and intraparticle transport are the two steps that might influence Y(III) sorption. The negative values of ΔG of ⁹⁰Y retention dictate that, the process is a spontaneous. The negative values of ΔH and ΔS reflect the exothermic nature of ⁹⁰Y(IIsorption and the random uptake of ⁹⁰Y(III) onto Zr–V sorbent. Zr–V exchanger offers unique advantages of ⁹⁰Y(III) retention over conventional solid sorbents in rapid and effective separation of traces of ⁹⁰Y(III) from Sr. The exchanger was successfully packed in column for an effective separation of ⁹⁰Y.     

Optimization of fundamental parameters in routine production of 90Y-hydroxyapatite for radiosynovectomy

Hydroxyapatite was applied as a carrier adsorbing ⁹⁰Y³⁺ ions for ⁹⁰Y-HA colloid production. The radiopharmaceutical colloid was prepared by adding an acidic solution of ⁹⁰YCl₃ to HA suspension in saline solution. Effective parameters on labeling of ⁹⁰Y-HA were evaluated. Adsorption and cation-exchange properties were studied using inductively coupled plasma elemental analysis and N₂ adsorption–desorption isotherm method. Radionuclidic purity was over 99.9 %. Labeling yield and radiochemical purity were >99 %. Radiochemical purity was evaluated also in human albumin for 7 days at 37 °C. Biodistribution studies have shown complete retention of injected radioactivity at the administration site up to 72 h.     

Atmospheric depositional fluxes of cosmogenic <Superscript>32</Superscript>P, <Superscript>33</Superscript>P and <Superscript>7</Superscript>Be in the Sevastopol region

⁹⁰Y was separated from ⁹⁰Sr using an extraction chromatographic resin consisting of 4, 4′(5′)-bis-t-butylcyclohexano-18-crown-6 (DtBuCH₁₈C₆), 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl) amide (C₂mimNTf₂), and a polymer (Amberlite XAD-7). Ionic liquid was introduced into the column to improve the separation efficiency. The column showed an excellent performance for the separation of Y from Sr. After the separation, the ratio of ⁹⁰Sr/⁹⁰Y was <2.0 × 10^?5; the column was recycled for >18 times. This study provides preliminary results on columns to produce ⁹⁰Y with a high purity in radiopharmaceuticals.     

High-resolution monolithic columns—a new tool for effective and quick separation

This work describes a comparison of three types of commercial high-performance liquid chromatography silica monolithic columns with different inner diameters and generations of monolithic sorbent: a “classic” monolithic column, the first generation (Onyx? monolithic C₁₈, 100 mm?×?4.6 mm, Phenomenex); a “narrow” monolithic column for fast separation at lower flow rates (Chromolith® Performance RP-18e, 100 mm?×?3 mm, Merck); and a recently introduced “high-resolution” monolithic column, the next generation (Chromolith® HighResolution RP-18e, 100 mm?×?4.6 mm, Merck). Separation efficiency (number of theoretical plates, height equivalent to a theoretical plate and van Deemter curves), working pressure, the symmetry factor and resolution were critical aspects of the comparison in the case of the separation of ascorbic acid, paracetamol and caffeine. The separations were performed under isocratic conditions with a mobile phase consisting of 10:90 (v/v) acetonitrile–phosphoric acid (pH 2.80). Detailed comparison of the newest-generation monolithic column (Chromolith® HighResolution) with the previously introduced monolithic sorbents was performed and proved the advantages of the Chromolith® HighResolution column.

Semi-automated cloud point extraction with cold column trapping of surfactant-rich phase for phenazopyridine determination in human serum

A semi-automated cold column trapping-cloud point extraction (CCT-CPE) method was developed and applied to the determination of phenazopyridine in human serum. In the proposed technique, a mixture of sample (pH 8) and Triton X-100 (0.4 % v/v) was incubated at 90 °C for 5 min in a heating sample cell. The developed turbid solution was then flowed through a CCT preconcentration column packed with C18 sorbent using a peristaltic pump. A pair of thermal electric cooler (TEC) plates was used for cooling the column. The surfactant-rich phase was retained on the CCT at 0 °C and desorbed, subsequently, in an elevated temperature by ethanol. The analytical parameters such as pH, surfactant concentration, temperature and incubation time were optimized by a central composite design (response surface) method. Six replicated analyses at the optimized conditions resulted in a recovery of 99.7 % and a relative standard deviation of 2.45 for phenazopyridine. The detection limit of the method (3σ) was 0.50 mg L^?1 for the analyte. Compared to conventional CPE, the proposed CCT-CPE method required less sample handling, eliminated the centrifugation step and was substantially faster. The method was successfully applied to the determination of phenazopyridine in some human serum and tablet samples.     

Preparation of a hybrid monolithic stationary phase with allylsulfonate for the rapid and simultaneous separation of cations in capillary ion chromatography

A hybrid monolithic column with sulfonate functionality was successfully prepared for the simultaneous separation of common inorganic cations in ion‐exchange chromatographic mode through a simple and easy single‐step preparation method. The strong cation‐exchange moieties were provided directly from allylsulfonate, which worked as an organic monomer in the single‐step reaction. Inorganic cations (Li⁺, Na⁺, K⁺, NH₄⁺, Cs⁺, Rb⁺, Mg²⁺, Ca²⁺, and Sr²⁺) were separated satisfactorily by using CuSO₄ as the eluent with indirect UV detection. The allysulfonate hybrid monolith showed a better performance in terms of speed and pressure drop than the capillary packed column. The number of theoretical plates achieved was 19 017 plates/m (in the case of NH₄⁺ as the analyte). The relative standard deviations (n = 6) of both retention time and peak height were less than 1.96% for all the analyte cations. The allysulfonate hybrid monolithic column was successfully applied for the rapid and simultaneous separation of inorganic cations in groundwater and the effluent of onsite domestic wastewater treatment system.     

Sorption of plutonium from low level liquid waste using nano MnO2

Nano-crystalline MnO₂ has been synthesized by the method of alcoholic hydrolysis of KMnO₄ and its potential as a sorbent for plutonium present in the low level liquid waste (LLW) solutions was investigated. The kinetic studies on the sorption of Pu by MnO₂ reveal the attainment of equilibrium sorption in 15 h, however 90 % of sorption could be achieved within an hour. In the studies on optimization of the solution conditions for sorption, it was observed that the sorption increases with the pH of the aqueous solution, attains the maximum value of 100 % at pH = 3 and remains constant thereafter. The sorption was found to be nearly independent of the ionic strength (0.01–1.0 M) of the aqueous solutions maintained using NaClO₄, indicating the inner sphere complexation between the Pu⁴⁺ ions and the surface sites on MnO₂. Interference studies with different fission products, viz., Cs⁺, Sr²⁺ and Nd³⁺, revealed decrease in the percentage sorption with increasing pH of the suspension indicating the competition between the metal ions. However, at the metal ion concentrations prevalent in the low level liquid waste solutions, the decrease in the Pu sorption was only marginally decreased to 90 % at pH = 3, the decrease being more in the case of Nd³⁺ than that in the case of Cs⁺. This study, therefore, shows nano-crystalline MnO₂ can be used as a sorbent for separation of Pu from LLW solutions.     

Synthesis of monolithic zirconia with macroporous bicontinuous structure via epoxide-driven sol–gel process accompanied by phase separation

Monolithic macroporous zirconia was synthesized through a new method involving an epoxide-driven sol–gel method accompanied by a spontaneous phase separation. The sol–gel transition utilized inorganic salt ZrCl₄ as primary precursor and propylene oxide as matrix former through a ring-opening reaction. Phase separation was induced with poly-(ethylene oxide) (PEO) and its tendency was adjusted by incorporating Mg²⁺/Y³⁺ and N-methylformamide (NFA) in starting solution. The morphology of the dried gel changed from a solid nanoporous structure through a phase separated macroporous bicontinuous structure to aggregates particles when varying Mg²⁺ or Y³⁺, NFA and PEO composition. An appropriate choice of the starting composition, by which the phase separation and gelation occurred parallel, allows the fabrication of macroporous zirconia monoliths in large dimensions (Φ = 30 mm, h = 8 mm). The skeleton of the monolithic macroporous zirconia gels possess a BET surface area of 271.7 m²/g. Accordingly, the effect and mechanisms of Mg²⁺, Y³⁺ and NFA during gelation process were proposed in detail. Moreover, Mg²⁺ or Y³⁺ might also act as stabilizer to form the magnesia or yttria stabilized tetragonal or cubic zirconia after the samples were heat-treated at high temperature (800 °C).     

Adsorption kinetic, isotherm and thermodynamic studies of Sr2+ onto hexagonal tungsten oxide

Hexagonal tungsten oxide (hex-WO₃) with exchangeable sodium and ammonium cations located in hexagonal channel was synthesized by a facile hydrothermal treatment of sodium tungstate dihydrate in concentrated HCl solution in the presence of ammonium sulfate. An attempt was made to assess the potential of hex-WO₃ for the adsorption of Sr²⁺ ions from acidic radioactive waste solutions. Adsorption of Sr²⁺ reached equilibrium very quickly in 2 h in acidic aqueous solution. Maximum removal of Sr²⁺ ions occurred at pH 4. Equilibrium studies showed that the extent of Sr²⁺ ions uptake by hex-WO₃ was better described by the Freundlich isotherm in comparison with the Langmuir model. The thermodynamic parameters showed that the adsorption of Sr²⁺ ions onto hex-WO₃ was spontaneous and exothermic under the studied conditions.     

A novel partitioning process for treatment of high level liquid waste using macroporous silica-based adsorbents

To separate the long-life and significant fission product elements from high level liquid waste (HLLW), a novel partitioning process for the treatment of HLLW has been studied experimentally based on column separation technique using macroporous silica-based adsorbents. This process consists of (1) Cs and Rb are removed by the first separation column packed with (calix[4] + dodecanol)/SiO₂–P adsorbent; (2) Sr and Ba are eluted out by the second separation column packed with (DtBuCH18C6 + dodecanol)/SiO₂–P adsorbent; (3) Pd is partitioned by the third separation column packed with MOTDGA–TOA/SiO₂–P adsorbent; (4) Ru, Rh and Mo can be separated by the fourth separation column packed with TODGA/SiO₂–P adsorbent; (5) Am is separated from RE by the fifth column is packed with isobutyl-BTP/SiO₂–P adsorbent. The experimental results indicated that this partitioning process is essentially feasible.     

Effect of Sr2+ doping on the luminescence properties of YVO4:Eu3+,Sr2+ particles prepared by a solvothermal method

Well-dispersed Eu³⁺ and Sr²⁺ co-doped YVO₄ luminescent particles (YVO₄:Eu³⁺,Sr²⁺) on the submicron scale were prepared by a facile solvothermal method at low temperature. The effect of Sr²⁺ doping on the luminescence of YVO₄:Eu³⁺,Sr²⁺ particles was investigated by fixing the Eu³⁺ doping concentration at 7 mol%. It was found that the luminescence intensity of the as-prepared YVO₄:Eu³⁺,Sr²⁺ particles increased with the Sr²⁺ doping concentration x to reach a two-fold enhancement when x = 5 %, and then decreased for higher x. We also investigated the effect of thermal annealing on the luminescence properties of the YVO₄:Eu³⁺ and YVO₄:Eu³⁺,Sr²⁺ particles. A remarkable enhancement in their luminescence properties was observed after annealing at 900 °C in air for 30 min. It was showed that the annealed YVO₄:Eu³⁺,Sr²⁺ particles exhibited a two-fold stronger emission than the annealed YVO₄:Eu³⁺. This work indicates that Sr²⁺ doping is beneficial to the luminescence enhancement for both the as-prepared and annealed YVO₄:Eu³⁺,Sr²⁺ particles.     

3D Chiral Nanoporous Metal–Organic Framework for Chromatographic Separation in GC

Metal–organic frameworks (MOFs) have received great attention as stationary phases in chromatographic separation technology because of their unusual properties such as high surface areas, fascinating structures, and excellent chemical and thermal stability. A chiral MOF, [(CH₃)₂NH₂][Cd(bpdc)_1.5]·2DMA, possesses a unique chiral nanotube motif built from the covalent linkage of homochiral nanotubes made up of octuple helices. Here, we report the fabrication of a three-dimensional (3D) chiral nanoporous MOF-coated capillary column (2 m long × 75 μm i.d.) for capillary gas chromatographic separation of racemates, Grob’s test mixture, normal alkanes, normal alcohols, and isomers. The MOF-coated capillary column offered good separation efficiency (2,180 plates m^?1), which was measured using n-dodecane as the analyte at 120 °C. The relative standard deviations of repeatability for citronellal on MOF-coated capillary column were 0.23 and 2.1 % for retention time and peak area, respectively. The results demonstrated that the capillary column exhibited excellent selectivity and separation ability toward Grob’s test mixture, normal alkanes, normal alcohols and isomers, especially for racemates.     

Separation of hafnium from tungsten by extraction chromatography with TOA in HCl–H<Subscript>2</Subscript>O<Subscript>2</Subscript> mixture

In order to measure ¹⁸²Hf by accelerator mass spectrometry (AMS), a chemical procedure for separation of hafnium from tungsten has been developed by extraction chromatography. The extraction chromatographic behavior of hafnium and tungsten has been studied using tri-n-octylamine (TOA) as the stationary phase, HCl–H₂O₂ mixture and NH₃·H₂O as the mobile phase. The effects of H₂O₂ concentration, column loading and column dimensions are investigated. Hf and W with microgram amounts are successfully separated on a chromatographic column (Ø5 × 196 mm), on which Hf is hardly retained after completely eluted with 6 M HCl–1% H₂O₂ and W strongly adsorbed is then eluted with 3 M NH₃·H₂O. The decontamination factor for tungsten is 3.0 × 10⁵ and the recovery of hafnium is better than 99% using a single column separation.     

Zinc–aluminum layered double hydroxide as a nano-sorbent for removal of Reactive Yellow 84 dye from textile wastewater effluents

In this research, the zinc–aluminum layered double hydroxide (Zn–Al LDH) was synthesized and structurally and morphologically characterized by X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy and N₂ adsorption–desorption techniques. The obtained nano-structured inorganic material was employed as an innovative nano-sorbent for separation of Reactive Yellow 84 (RY84) dye from aqueous solutions, which can be spectrophotometrically monitored at λ = 359 nm. The effect of several parameters such as type of interlayer anion in Zn–Al LDH structure, pH, sample flow rate, elution conditions, amount of nano-sorbent, sample volume and co-existing ions on the retention efficiency was investigated and optimized. The results showed that trace amounts of the RY84 could be retained using a column packed with 300 mg of the Zn–Al(NO₃ ^?) LDH at pH 8 and stripped by 2.5 mL of 3.0 mol L^?1 NaOH. Under the optimum experimental conditions, the limit of detection and the relative standard deviation were 0.04 μg mL^?1 and 1.8 %, respectively. The calibration graph using the presented solid phase extraction system was linear in the range of 0.15–1.5 μg mL^?1 with a correlation coefficient of 0.9982. The method was successfully applied to removal of RY84 from several textile wastewater effluents.     

Study of the gadolinium sorption on the C100 ion-exchange resin for the development of the antineutrino detector targets

Adsorption of the gadolinium from H₂O and HCl solutions on the ion-exchange resin C100 is investigated. The experiments were carried out by varying the acidity of the liquid phase, the amount of sorbent, and the temperature. The maximal sorption of the ions Gd³⁺ is observed from the solution 0–0.2 M HCl under optimal conditions, the sorption reaches more than 99.5%. Sorption of Gd³⁺ on C100 from H₂O solution occurs most intensively during the first 3 min then for 30 min the system smoothly comes to equilibrium. The maximal sorption capacity of the resin C100 amounted to 1.2 ± 0.1 mmol g^?1. The thermodynamic parameters of sorption: ΔG = ? 24.20 kJ mol^?1, ΔS = ? 90.27 J mol^?1 K^?1, ?H = ? 50.93 kJ mol^?1 were evaluated. It is shown that the sorption of gadolinium on the ion-exchange resin C100 is described by models of kinetically pseudo-first and pseudo-second order. It is established that the Gd³⁺ sorption on the C100 resin is reversible second order chemical reaction.     

Mathematical modeling of separation of microamounts of strontium from yttrium in the two-phase water-nitrobenzene extraction system

A rapid extraction separation of microamounts of Sr²⁺ from Y³⁺ using HCl, benzo-15-crown-5 (B15C5) and hydrogen dicarbollylcobaltate (H⁺B^-) in the two-phase water-nitrobenzene system was developed. The reached separation factor α(Sr/Y) was higher than 10⁵.     

Mathematical modeling of separation of microamounts of strontium from yttrium in water - HCl -nitrobenzene - 15-crown-5 - hydrogen a dicarbollylcobaltate extraction system</p> </p>

Summary A rapid separation of microamounts of Sr²⁺ from Y³⁺ using HCl, 15-crown-5 (15C5) and hydrogen dicarbollylcobaltate (H⁺B^-) in the two-phase water - nitrobenzene extraction system was developed. The reached separation factor a(Sr/Y) was approximately 10. ^5.4</p> __</p>     

Extraction and theoretical study on the complexation of the strontium cation with beauvericin

From extraction experiments and γ-activity measurements, the extraction constant corresponding to the equilibrium Sr²⁺(aq) + 2A^?(aq) +1(nb) ? 1·Sr²⁺(nb) + 2A^?(nb) taking place in the two-phase water–nitrobenzene system (A^? = picrate, 1 = beauvericin; aq = aqueous phase, nb = nitrobenzene phase) was evaluated as log K _ex(1·Sr²⁺,2A^?) = ?0.6 ± 0.1. Further, the stability constant of the 1·Sr²⁺ complex in nitrobenzene saturated with water was calculated for a temperature of 25 °C: log β _nb(1·Sr²⁺) = 8.5 ± 0.1. Finally, by using quantum-mechanical DFT calculations, the most probable structure of the resulting cationic complex 1·Sr²⁺ was derived.     

Synthesis of garnet structured Li7+x La3Y x Zr2-x O12 (x = 0–0.4) by modified sol–gel method

Preparation of lithium garnet Li₇La₃Zr₂O₁₂ (LLZ) in cubic phase by solid state method requires high temperature sintering around 1,200 °C for 36 h in Al₂O₃ crucible with intermittent grinding. Synthesis of LLZ in cubic phase at lower temperatures by wet chemical methods was reported earlier, however that decompose at high temperature around 850 °C. In this work we report the systematic studies on synthesis of garnet structured electrolytes by modified sol–gel method by the simultaneous substitution of Li⁺ and Y³⁺ for Zr⁴⁺ according to the formulae Li_7+x La₃Y _x Zr_2-x O₁₂ (x = 0, 0.1, 0.2, 0.3 and 0.4). The present investigation revealed that the cubic garnet phase is obtained at much lower temperature for Li₇La₃Zr₂O₁₂ and the simultaneous increase of both Li⁺ and Y³⁺ in Li_7+x La₃Y _x Zr_2-x O₁₂ requires slightly higher sintering temperatures for the formation of cubic garnet phase. SEM micrographs of the Li_7+x La₃Y _x Zr_2-x O₁₂ (x = 0, 0.1, 0.2, 0.3 and 0.4) annealed at minimum sintering temperature required for the formation of cubic garnet phase revealed the increase in grain size and relatively dense structure with increase of x in Li_7+x La₃Y _x Zr_2-x O₁₂.     

Extraction and theoretical study on complexation of the strontium cation with antamanide

By using extraction experiments and γ-activity measurements, the extraction constant corresponding to the equilibrium Sr²⁺(aq) + 2A^?(aq) + 1(nb) ? 1·Sr²⁺(nb) + 2A^?(nb) occurring in the two-phase water–nitrobenzene system (A^? = picrate, 1 = antamanide; aq = aqueous phase, nb = nitrobenzene phase) was determined as log K _ex (1·Sr²⁺, 2A^?) = ?0.3 ± 0.1. Further, the stability constant of the 1·Sr²⁺ complex in nitrobenzene saturated with water was calculated for a temperature of 25 °C: log β _nb (1·Sr²⁺) = 8.8 ± 0.1. Finally, applying quantum mechanical density functional level of theory calculations, the most probable structure of the cationic complex species 1·Sr²⁺ was derived. In the resulting complex, the “central” cation Sr²⁺ is bound by six bond interactions to the corresponding six oxygen atoms of the parent ligand 1. The interaction energy of the considered 1·Sr²⁺ complex was found to be ?1,114.9 kJ/mol, confirming the formation of this cationic species as well.