Simultaneous chirality transfer and structured aggregation of a cyclopeptide in a liquid crystal

We report the finding that a chiral cyclopeptide dissolved in a nematic liquid crystal (LC) host could aggregate in a manner that is controlled by the texture (LC director configuration) of a cholesteric phase that is induced by the cyclopeptide itself. On one hand, with the fingerprint texture, where the helical axis formed by rotating LC molecules, that lies in the substrate plane, the cyclopeptide can use the LC texture as a template to aggregate and form long-range-ordered ribbons that mimic the helical configuration of the LC director. On the other hand, with the planar texture, where the helical axis is normal to the substrate plane, the cyclopeptide can migrate into the "oily-streak" defect regions of the cholesteric phase and stabilize a network of defects that dictates the electrooptical response of the LC. This is the first example of a molecular species exhibiting such a structured aggregation and defect stabilization effect in a cholesteric LC, but similar phenomena were previously reported for platinum nanoparticles and silica colloidal particles, respectively, dispersed in a cholesteric LC host. This study provides more evidence for the potential interest of exploring LCs as an anisotropic medium for mediating the aggregation and assembly of cyclopeptides.     

The first evidence for a stereostable centrometalled chirality in a dicyclopentadienyltantalum complex

Reaction of dichlorophenylphosphine with monohydrides Cp₂M(CO)H (M = Nb or Ta) gives the salts [Cp₂M(CO)(PPhClH(]⁺ Cl⁻ in good yields. In a basic medium these salts give the neutral complexes Cp₂M(CO) [P(O)(H)Ph]. In a reaction starting from the chiral hydride Cp^* CpTa(CO)H, (Cp^* = C₅Me₅), two diastereoisomers are obtained, and can be isolated as stereostable structures.     

Photo-induced liquid crystal alignment on polyimide containing fluorinated groups

Polyimides were prepared from pyromellitic dianhydride, 4,4'-bis[2-(4-aminophenyl)hexafluoroprop-2-yl]diphenyl ether and 4,4'-diamodiphenyl ether (PMDA-BDAF-ODA) and used for liquid crystal alignment using linearly polarized UV exposure. The alignment properties of a LC on the polyimide films were found to depend on the fluorine content in the PMDA-BDAF-ODA alignment layer and on the UV exposure time. Pretilt angles were obtained in the range 0° to 90° dependent upon the fluorine content in the polyimide film and the UV exposure time. These effects seem to be closely related to the surface energy of the photo-alignment layer.     

Supramolecular chirality and reversible chiroptical switching in new chiral liquid-crystal azopolymers

The synthesis of chiral liquid-crystalline polymers of well-controlled structure (linear and three-armed star-shaped) with distinct average chain lengths and low polydispersity was achieved by atom transfer radical polymerisation (ATRP) of a new optically active monomer (S)-4-[6-(2-methacryloyloxypropanoyloxy)hexyloxy)]-4'-ethoxyazobenzene [(S)-ML6A], containing the L-lactic residue of one absolute configuration in the side-chain. All the obtained polymeric samples, characterised by differential scanning calorimetry (DSC), X-ray diffraction (XRD) and polarised optical microscopy (POM), exhibit a smectic A(1/2) (fully interdigitated) liquid-crystalline phase and high cleaning points, with transition temperatures dependent on the average polymerisation degree and the macromolecular structure. The chirality originated at the molecular level by the asymmetric functionality of the L-lactic acid residue provides the polymers, in the smectic phase, of highly homogeneous conformations with a prevailing chirality related to the presence of H-aggregates having conformational dissymmetry of one prevailing screw-sense. By irradiating with circularly polarised light (CPL), it is possible to photomodulate the chiroptical properties of these intrinsically chiral polymeric thin films. Upon irradiation with left-handed CPL (l-CPL), the circular dichroism (CD) spectra of the films show enhancement of ellipticity and a net inversion of sign. The effect is reversible and the mirror image of the CD spectrum can be restored by pumping with right-handed CPL radiation (r-CPL). The results show the ability of l-CPL to invert the supramolecular chirality of the materials and demonstrate the essential role of azoaromatic aggregates.     

Effect of uniaxial strain on a molecule-based ferrimagnet with crystal chirality

Bimetallic ferrimagnet [Cr(CN)₆][Mn(R)-pnH(H₂O)]H₂O with crystallographical chirality of space group P2₁2₁2₁ exhibits a giant third-order harmonic susceptibility at around 38 K. This anomaly appears as precursory magnetic phenomenon of the magnetic ordering. In order to investigate the effect of lattice distortion on this giant nonlinear magnetic response (NLMR) and finally elucidate the correlation between the structural chirality and the giant NLMR, we performed the ac susceptibility measurement for the single crystal in the situation of bringing about lattice distortion along the direction parallel to the a-axis. This giant NLMR was drastically suppressed even by slight strain, whereas the traces could be confirmed in the region up to 3.7 kbar. We conclude that the appearance of the giant NLMR requires crystal chirality well-regulated over the crystal.     

Electrosynthesis in a microemulsion using a novel cobaloxime catalyst

[Bis[μ-[(2,3-butanedione dioximato)(2-)-O:O′]]tetrafluorodiborato(2-)-N,N′,N″,N]cobalt (COBF, 1) was used as a catalyst for the conversion of trans-1,2-dibromocyclohexane (DBCH) to cyclohexene and the photoelectrochemical cyclisation of 2-(4-bromobutyl)-2-cyclohexen-1-one (BBC) to trans-1-decalone 2 in a microemulsion. Voltammetry showed clear evidence of catalytic behaviour and bulk electrolysis showed larger turnover numbers for both reactions when compared with the same system using vitamin B_12a as catalyst. For BBC, improved turnover may result from a relatively weak carbon–cobalt bond in the alkylcobalt intermediate of 1, and from better partition of 1 into the organic phase in which reactant BBC resides.     

Electrocatalytic reduction of dioxygen on a glassy carbon electrode modified with adsorbed cobaloxime complex.

The preparation and electrochemical properties of a glassy carbon (GC) electrode modified with cobaloxime complex were investigated. The complex of the type [CoIII(DO)(DOH)pn)Cl2] where (DO)(DOH)pn = N2,N2'-propanediylbis-2,3-butanedione-2-imine-3-oxime) was adsorbed irreversibly and strongly on the surface of preanodized glassy carbon electrode. Electrochemical behavior and stability of modified GC electrode were investigated by cyclic voltammetry. The electrocatalytic reduction of dioxygen has been studied using this modified glassy carbon electrode by cyclic voltammetry, chronoamperometry and rotating disk electrode voltammetry as diagnostic techniques. The modified electrode showed excellent eletrocatalytic ability for the reduction of dioxygen to hydrogen peroxide in acetate buffer (pH 4.0) with overpotential 1.0 V lower than the plain glassy carbon electrode. The formal potential for this modified electrode is not shifted to more negative potentials by repeated reduction-oxidation cycles in oxygen-saturated supporting electrolyte solution. The apparent electron transfer rate constant (kS), the transfer coefficent (alpha) and the catalytic rate constant of O2 reduction at a GC modified electrode were determined by cyclic voltammetry and rotating disk electrode voltammetry and were found to be around 2.6 s(-1), 0.33 and 2.25 x 10(4) M(-1) s(-1). Based on the results, a catalytic mechanism is proposed and discussed.     

Electron-induced switching of the supramolecular chirality of optically active polythiophene aggregates

A chiral regioregular polythiophene (PT), poly[3-[4-((R)-4-ethyl-2-oxazolin-2-yl)phenyl]thiophene] (poly-1), forms chiral aggregates which exhibit a unique induced circular dichroism (ICD) in the pi-pi transition region derived from the supramolecular chirality in the presence of various poor solvents or metal salts in chloroform. We report here that the chirality of such supramolecular aggregates can be switched ("on" and "off") through electron transfer. We have found that upon the addition of copper(II) trifluoromethanesulfonate [Cu(OTf)(2)] to the chiral aggregates of poly-1 in a chloroform-acetonitrile mixture, the ICD disappears because of the oxidative doping of the poly-1 main chain, while a further addition of amines such as triethylenetetramine (TETA) induces undoping of the poly-1 which results in the reappearance of the ICDs. Therefore, the supramolecular chirality of the poly-1 assemblies was reversibly controlled by the addition or removal of an electron from the poly-1 main chain. This may be the first example of a reversible supramolecular chirality switch on chiral PT aggregates. We investigated the mechanism of the chirality switch through the doping and undoping process on the polymer main chain by means of absorption and CD spectroscopies, ESR, cyclic voltammetry, X-ray diffraction, and AFM measurements.     

An asymmetric S(N)Ar reaction using the molecular chirality in a crystal

An asymmetric S(N)Ar reaction was performed by using molecular chirality generated and amplified by the spontaneous crystallization of achiral naphthamides; the chirality was retained in a cold solution, caused by slow racemization, and was transferred to stable axially chiral materials with high enantiomeric excesses.     

Host-guest effect on chirality transfer from a binaphthyl derivative to a host nematic liquid crystal

A novel dichiral compound possessing both an asymmetric axis and a chiral centre induces opposite twist senses and distinct helical pitches in different host nematic liquid crystals; the host-guest effect on chirality transfer is discussed in terms of molecular recognition.     

Nanogel nanosecond photonic crystal optical switching

We developed a robust nanosecond photonic crystal switching material by using poly(N-isopropylacrylamide) (PNIPAM) nanogel colloidal particles that self-assemble into crystalline colloidal arrays (CCAs). The CCA was polymerized into a loose-knit hydrogel which permits the individual embedded nanogel PNIPAM particles to coherently and synchronously undergo their thermally induced volume phase transitions. A laser T-jump from 30 to 35 degrees C actuates the nanogel particle shrinkage; the resulting increased diffraction decreases light transmission within 900 ns. Additional transmission decreases occur with characteristic times of 19 and 130 ns. Individual NIPAM sphere volume switching occurs in the approximately 100 ns time regime. These nanogel nanosecond phenomena may be useful in the design of fast photonic crystal switches and optical limiting materials. Smaller nanogels will show even faster volume phase transitions.     

Multifunctional switching of a photo- and electro-chemiluminescent iridium-dithienylethene complex

Optical or electrochemical excitation of an Ir(iii) cyclometalated complex bearing photochromic and acid-sensitive dithienylethene ligands generates phosphorescence emission that can be switched on/off by light and chemical stimulation.     

Versatile switching in substrate topicity: supramolecular chirality induction in di- and trinuclear host complexes

Supramolecular chirality effects have been achieved both for ditopic and monotopic substrates by using a programmable bis-salphen scaffold that incorporates either two or three Zn nuclei. The dinuclear host shows preferential chirogenesis in the presence of ditopic systems, whereas effective chirality transfer to the trinuclear complex is realized through monotopic binding. The mode of binding in the trinuclear host has been investigated through X-ray crystallography, CD measurements, UV/Vis spectroscopy, and DFT analysis. The bis-salphen scaffold holds promise for the development of substrate-specific host systems useful for determination of the absolute configuration of various types of organic molecules.     

Fast switching and luminance-controlled fringe-field switching liquid crystal device for vehicle display

ABSTRACT

Liquid crystal displays (LCDs) for vehicle displays should exhibit a fast response time in wide temperature range and wide-viewing angle in horizontal and downward directions without grey-scale inversion but limited brightness in the upward direction because the display images can be reproduced in the front window glass of a vehicle, affecting driver’s front visibility. Currently, fringe-field switching (FFS) liquid crystal device is widely commercialised for high resolution and wide-viewing-angle LCD; however, it needs to improve response times and limit the display brightness in the upward direction. As a solution, we propose a homogeneously aligned liquid crystal device in which liquid crystal director does tilt as well as twist deformation in a confined area by both vertical- and fringe-electric fields, exhibiting about two times faster decay response time than that of conventional FFS mode with suppressed luminance in the upward direction. The proposed liquid crystal device can be applied to LCDs for vehicle displays.     

Banana-shaped liquid crystals with two oligosiloxane end-groups: field-induced switching of supramolecular chirality

The first bent core mesogen carrying branched oligosiloxane units at both ends was synthesized and investigated with polarized light microscopy, DSC, X-ray diffraction of well aligned samples, and electrooptical methods. Two different antiferroelectric switching liquid crystalline phases were found. Both can be regarded as modulated smectic phases in which the molecules have extremely large tilt angles. In both mesophases, the field-induced switching takes place by rotation around the molecular long axes. This field-induced reorientation switches the layer chirality. The transition between the two mesophases is associated with a change of the tilt direction from synclinic to anticlinic. The synclinic high-temperature phase is an obliquelike ribbon phase whereas the anticlinic low-temperature phase represents a sinusoidal undulated layer structure (SmCAPA). It is proposed that the phase transition from the ribbon phase to the undulated layer structure is mainly driven by the change of the interlayer correlation.