Catalytic reduction of U(VI) to U(IV) using hydrogen with platinum loaded on alumina and silica

During the reprocessing of spent nuclear fuel, uranium (U) and plutonium (Pu) are together extracted by employing tri-n-butyl phosphate (TBP)/dodecane mixture and their partitioning is achieved by adding uranous nitrate. The partitioning agent, uranous is conventionally produced by the electrolytic reduction of uranyl nitrate. An alternate route for the reduction of U from (VI) to (IV) using hydrogen (H₂) as reductant was developed using platinum (Pt) based catalyst. Improvements in the development of the catalyst have been carried out in order to reduce the requirement of Pt without affecting the reduction performance. Experiments using 2 wt% Pt loaded on alumina beads and alumina powder have been performed and results are discussed. As the catalyst supported on alumina was found to be unstable in acidic environment, Pt loaded on silica powder has also been developed. Pt loaded on alumina and silica substrates have been tried to envisage the reduction behaviour using H₂ as reductant in presence of hydrazine nitrate which acts as U(IV) stabiliser as well as reductant. Parametric studies have been carried out to optimise the process parameters namely pressure, temperature, U concentration, free acidity, hydrazine concentration and catalyst to U (C/U) ratio. 2 wt% Pt loaded on silica has been selected for further scale up studies for making uranous.     

Kinetic studies on the extraction of U(IV) by TBP in kerosene from nitrate medium

The kinetics of extraction of U(IV) by TBP in kerosene was investigated using a stirred Lewis cell. The effect of the different parameters affecting the extraction rate as well as temperature were separately investigated. The rate equation deduced from the experimental results show that the extraction of U(IV) is first order dependent on TBP concentration while it is of zero order with respect to U(IV), H⁺, NO ₃ ^– and HNO₃ concentrations. The data obtained show that the extraction process is governed by chemical reactions taking place at teh interface.     

Mechanism of U(VI) extraction by CYANEX 301 in kerosene from nitrate medium

The rate of extraction of U(VI) by CYANEX 301 in kerosene from nitrate medium of constant ionic strength (0.1M) was investigated using a stirred Lewis cell. The different parameters affecting the extraction rate of U(VI) as well as the temperature were studied. The effects of interfacial area and tension on the extraction rate showed that the extraction process is controlled by a chemical reaction taking place at the interface. The kinetic results indicated that the extraction of U(VI) is of first order, dependent on CYANEX 301 and nitrate concentrations while it is of inverse first order for uranium concentration. This revised version was published online in July 2006 with corrections to the Cover Date.     

Synergistic effect of HBMPPT with PSO, DOSO and TBP on the extraction of U(VI) and on the separation of U(VI) and Th(IV)

Some popular neutral extractants (PSO-petroleum sulfoxide, DOSO-di-n-octyl sulfoxide, TBP-tributylphosphate etc.) were chosen as synergist to study the synergistic effect on the extraction reaction with HBMPPT (4-benzoyl-2,4-dihydro-5-methyl-2-phenyl-3H-pyrazol-3-thione) for U(VI), and the synergistic separation ability of HBMPPT for U(VI) and Th(IV). The synergistic extraction ability shown by the studied systems for U(VI) is as follows: PSO>DOSO>TBP, and the same sequence was also verified for the separation coefficient of U(VI) and Th(IV). The synergistic complexes may be presented as: UO₂NO₃·BMPPT·S and UO₂(BMPPT)₂·S for U(VI) (S is PSO, DOSO or TBP).     

Liquid-liquid extraction of uranium(VI) from aqueous acidic solutions using Alamine, TBP and CYANEX systems

Liquid-liquid extraction of uranium(VI) (UO₂ ²⁺) from aqueous acidic (HCl and HNO₃) solutions into a co-existing organic phase containing Alamine 308 (triisooctyl amine), TBP (tri-n-butyl phosphate) or CYANEX 302 (bis(2,4,4-trimethylpentyl) monothiophosphinic acid) and diluent (toluene) was studied at isothermal conditions (298.2 K) at aqueous phase acidity varying in the range 0.5-6 mol/dm³. All solvent systems exhibit a maximum distribution ratio restricted in the acidity range 3-4 mol/dm³. An obvious difference in extraction behavior through amine system has been observed for two acids, HCl and HNO₃, distinguishing the divergent interactions attributed to the different mechanism of complexation depending on the acidic medium. The high degree of separation of UO₂ ²⁺ from HNO₃ solution is feasible through a complex formation with extractants ranging in the order CYANEX 302 > TBP > Alamine 308. The results were correlated using various versions of the mass action law, i.e., a chemodel approach and a modified version of the Langmuir equilibrium model comprising the formation of one or at least two U(VI)-extractant aggregated structures.     

Removal of U(VI) from aqueous solutions by using attapulgite/iron oxide magnetic nanocomposites

The attapulgite/iron oxide magnetic nanocomposites were prepared by coprecipitation method and characterized by scanning electron microscopy, X-ray diffraction, vibrating sample magnetometer and Fourier transform infrared sorption spectroscopy. The results of characterization showed that iron oxides were successfully deposited on the surfaces of attapulgite. The prepared magnetic nanocomposites were applied to remove radionuclide U(VI) ions from aqueous solutions by using batch technique and magnetic separation method. The results showed that the sorption of U(VI) on attapulgite/iron oxide magnetic composites was strongly dependent on ionic strength and pH at low pH values, and was independent of ionic strength at high pH values. The interaction of U(VI) with the magnetic nanocomposites was mainly dominated by outer-sphere surface complexation or ion exchange at low pH values, and was controlled by inner-sphere surface complexation or multinuclear surface complexation at high pH values. With increasing temperature, the sorption of U(VI) on attapulgite/iron oxide magnetic composites increased and the thermodynamic parameters calculated from the temperature dependent sorption isotherms suggested that the sorption of U(VI) on the magnetic nanocomposites was a spontaneous and endothermic process. The high sorption capacity and easy magnetic separation of the attapulgite/iron oxide magnetic composites make the material as suitable sorbent in nuclear waste management.     

Cr(VI) ion removal from artificial waste water using supported liquid membrane

In this study, a novel flat-type synergic-supported liquid membrane was evaluated with a mixture of N-methyl-N,N,N-trioctylammonium chloride (Aliquat 336) and tributyl phosphate (TBP) as the carrier and kerosene as the diluent to remove Cr(VI) from synthetic waste water. The main parameters involved in the process were identified and optimised. The parameters were divided into two groups, those that were independent and those having an interaction. The parameters of the carrier/kerosene volumetric proportion and stirring rate were optimised individually due to their nature. The optimal values of these parameters were 0.5 and 500 min^?1, respectively, for a constant carrier/kerosene ratio and stirring rate in the designed experiments using the response surface method (RSM). The four parameters of TBP/Aliquat 336, chromium concentration in the feed phase, feed and product pH were optimised using RSM; it was observed that the TBP/Aliquat 336 ratio, feed pH, pH of the stripping phase and interaction of this parameter with feed concentration have the most important effects on the removal of Cr(VI). The optimal levels of these parameters were 0.61, 71.75 mg L^?1, 3.5 and 12.66 for the ratio of TBP/Aliquat 336, feed chromium concentration, pH of the feed and pH of the product, respectively. An experimental removal rate of 94.63 % at the optimized levels was obtained.     

Adsorption of U (VI) ions from aqueous solution using silicon dioxide nanopowder

The adsorption kinetics for removal of uranium (V1) from aqueous solution using silicon dioxide nanopowder (nano-SiO₂) was investigated in batch and continuous techniques. Pseudo-first order and pseudo-second order were used to analyze the kinetics of batch experiments. In continuous technique the important parameters (initial concentration, flow rate and bed height) on the breakthrough curves were studied and the adsorption kinetics was analyzed using Thomas and Yoon and Nelson kinetic models. The comparison between the kinetic models was evaluated by the correlation coefficients (r²). The results indicated that the batch experiments fitted well with pseudo second-order kinetic model. The comparison of the experimental breakthrough curve to the breakthrough profile obtained from Thomas and Yoon and Nelson methods showed a satisfactory fit for silicon dioxide nanopowder.     

Oxidative modification of native protein residues using cerium(IV) ammonium nitrate

A new protein modification strategy has been developed that is based on an oxidative coupling reaction that targets electron-rich amino acids. This strategy relies on cerium(IV) ammonium nitrate (CAN) as an oxidation reagent and results in the coupling of tyrosine and tryptophan residues to phenylene diamine and anisidine derivatives. The methodology was first identified and characterized on peptides and small molecules, and was subsequently adapted for protein modification by determining appropriate buffer conditions. Using the optimized procedure, native and introduced solvent-accessible residues on proteins were selectively modified with polyethylene glycol (PEG) and small peptides. This unprecedented bioconjugation strategy targets these under-utilized amino acids with excellent chemoselectivity and affords good-to-high yields using low concentrations of the oxidant and coupling partners, short reaction times, and mild conditions.     

Utilization of industrial waste as a novel adsorbent: Mono/competitive adsorption of chromium(VI) and nickel(II) using diatomite waste modified by EDTA

The adsorption of Cr(VI) and Ni(II) using ethylenediaminetetraacetic acid‐modified diatomite waste (EDTA‐DW) as an adsorbent in single and binary systems was investigated. The EDTA‐DW was characterized using various analytical techniques, including Fourier transform infrared spectroscopy, thermogravimetric analysis, Brunauer–Emmett–Teller measurements, X‐ray diffraction, scanning electron microscopy and energy‐dispersive spectrometry. The adsorption experiment was conducted by varying pH, adsorbent dosage, initial concentration and temperature. In the single system, the sorption data for Cr(VI) fitted the Langmuir isotherm, but the Ni(II) adsorption data fitted well the Freundlich isotherm. The maximum sorption capacity of Cr(VI) and Ni(II) was 2.9 mg g^?1 at pH = 3 and 3.64 mg g^?1 at pH = 8, respectively. The kinetic data for both Cr(VI) and Ni(II) followed well the pseudo‐second‐order kinetic model in single and binary systems. Meanwhile, the extended Langmuir and extended Freundlich multicomponent isotherm models were found to fit the competitive adsorption data for Cr(VI) and Ni(II). In addition, in the binary system, the existence of Ni(II) hindered the adsorption of Cr(VI), but the presence of Cr(VI) enhanced the removal of Ni(II). This study provides some realistic and valid data about the usage of modified diatomite waste for the removal of metal ions.     

Highly efficient sorption of U(VI) from aqueous solution using amino/amine-functionalized magnetic mesoporous silica nanospheres

The amino/amine-functionalized magnetic mesoporous silica nanospheres (MSN-DETA) exhibited relatively high sorption capacity (q_m?=?153.68 mg/g) as well as excellent selectivity for U(VI). The U4f_7/2 X-ray photoelectron spectrometry revealed two binding energies at 380.8?±?0.3 eV (with the proportion of 75.2%) and 382.3?±?0.3 eV, which indicated the inner-surface complexation mechanism. The sorption isotherms fitted well with the Langmuir model, whereas the sorption kinetics could be fitted by pseudo-second-order model. The U(VI)-loaded MSN-DETA could be efficiently regenerated by acidified EDTA (0.4 M). These findings indicated that MSN-DETA could be used as a potential material for the efficient sorption/separation of U(VI) from wastewater.

     

Regioselective nitration of N,N-dialkylanilines using cerium(IV) ammonium nitrate in acetonitrile

A highly regioselective and inexpensive nitration of N,N-dialkylanilines by cerium(IV) ammonium nitrate (CAN) in acetonitrile under room temperature to yield p-nitryl-N,N-dialkylanilines in good yields was reported.     

X‐ray photoreduction of U(VI)‐bearing compounds

During XPS analysis, the soft X‐ray‐induced reduction of metals such as Cr(VI) and Ce(IV) in oxides has been reported in the literature and some mechanisms have been proposed to explain this phenomenon. The reduction of U(VI) by the beam during X‐ray Photoelectron Spectroscopy has been already reported in the literature but only for U(VI) sorbed or precipitated onto solids with reducing properties (as micas or pyrites) for whose Fe(II) can also induce the reduction of U(VI), or onto TiO₂ whose the photocatalytic properties are well known. The objective of this paper is to investigate the effects of X‐ray beam on U(VI) bulk compounds (UO₃, UO₂(OH)₂, (UO₂)₂SiO₄, UO₂(CH₃COO)₂ and UO₂C₂O₄). Successive U4f, U5f, C1s XPS spectra were recorded and compared as a function of the irradiation time. The XPS photoreduction of U(VI) into U(IV) is only observed for uranyl compounds containing organic matter (uranyl acetate and uranyl oxalate). Considering the evolution of the C1s signal during the X‐ray irradiation, a significant decrease of the C ? O component simultaneously to the U(VI) reduction is observed, which suggests a desorption of CO or other volatile organic products from the solid surface. All these results on U(VI) bulk compounds indicate the important role of organic carbon species in the photoreduction process and to explain these observations, a photoreduction mechanism has been suggested. Copyright © 2010 John Wiley & Sons, Ltd.     

Adsorptive removal of U(VI) and Th(IV) from aqueous solutions using polymer-based electrospun PEO/PLLA fibrous membranes

Fibrous membranes based on poly(ethylene oxide) and poly(l-lactide) fabricated by electrospinning were evaluated for the first time as substrates for the adsorption of tetravalent thorium (Th(IV)) and hexavalent uranium (U(VI)) from aqueous media. The membranes consisted of microfibers with diameters of approximately 2 μm as revealed by scanning electron microscopy. The adsorption of Th(IV) and U(VI) on the membrane was investigated as a function of pH, ionic strength and initial metal concentration under normal atmospheric conditions. The experimental data indicated increased affinity of the membrane for Th(IV) and U(VI), which was pH depended and reaches maximum values (>90 %) for Th(IV) and U(VI) at pH 3 and pH 6.5, respectively. The maximum adsorption capacity (q _max) at optimum conditions was evaluated from the Langmuir isotherm and was found to amount 50.08 and 9.3 mmol kg^?1 for Th(IV) and U(VI), respectively. In addition, studies on the effect of ionic strength on the adsorption efficiency did not show any significant effect indicating that the adsorption of Th(IV) and U(VI) on the membrane was most probably based on specific interactions and the formation of inner-sphere surface complexes. The significantly higher adsorption efficiency of the membrane for Th(IV) in acidic media (pH ≤ 3) could be utilized for a pH-triggered, selective separation of Th(IV) from U(VI) from aqueous media.     

Removal of Cr(VI) from water by cork waste

The biosorption by cork powder is considered as a promising method for heavy metal removal from industrial waste waters such as chromium tanning factories. The aim of this study is to evaluate the efficiency extent of this method using cork powder as a biosorbent for Cr(VI). The Fourier Transform Infrared spectroscopy (FTIR) analysis permits to distinguish the type of functional groups likely to participate in metal binding. A linear form of BET isotherms for all the three used temperatures (i.e., 25, 35 and 45 °C) and a pseudo-second-order equation of adsorption kinetics are obtained. Other experimental results highlight the meaningful influence of parameters such as contact time, pH, concentration of Cr(VI) and the adsorbent particle size on Cr(VI) adsorption. 97% of Cr(VI) has been removed under definite conditions particularly a particle size of diameter d < 0.08 mm and pH of 2–3 values.     

A density functional theory study of uranium(VI) nitrate monoamide complexes

Density functional theory calculations were performed on uranyl complexed with nitrate and monoamide ligands (L) [UO(2)(NO(3))(2)·2L]. The obtained results show that the complex stability is mainly governed by two factors: (i) the maximization of the polarizability of the coordinating ligand and (ii) the minimization of the steric hindrance effects. Furthermore, the electrostatic interaction between ligands and uranium(vi) was found to be a crucial parameter for the complex stability. These results pave the way to the definition of (quantitative) property/structure relationships for the in silico screening of monoamide ligands with improved extraction efficiency of uranium(vi) in nitrate acidic solution.     

Oxidation of 4-methoxyanilines to 1,4-benzoquinones using ceric ammonium nitrate (CAN)

Treatment of substituted 4-methoxyanilines with ceric ammonium nitrate in a 1:1 mixture of water and acetonitrile resulted in the formation of 1,4-benzoquinones in acceptable yields.