Experimental evidences for some unusual divalent cation complexes of valinomycin

From extraction experiments and γ-activity measurements, the exchange extraction constants corresponding to the general equilibrium M ²⁺ (aq) + 1 · Sr²⁺ (nb) ⇄ 1 · M ²⁺ (nb) + Sr²⁺ (aq) taking place in the two-phase water-nitrobenzene system (M ²⁺ = Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺, UO₂ ²⁺, Fe²⁺, Co²⁺, and Ni²⁺; 1 = valinomycin; aq = aqueous phase, nb = nitrobenzene phase) were evaluated. Moreover, the stability constants of the 1 · M ²⁺ complexes in water saturated nitrobenzene were calculated; they were found to increase in the order Fe²⁺ < Cd²⁺, Co²⁺ < Ni²⁺ < UO₂ ²⁺, Zn²⁺ < Cu²⁺ < Pb²⁺.     

Experimental evidences for some unusual divalent cation complexes of valinomycin

From extraction experiments and γ-activity measurements, the exchange extraction constants corresponding to the general equilibrium M ²⁺ (aq) + 1 · Sr²⁺ (nb) ⇄ 1 · M ²⁺ (nb) + Sr²⁺ (aq) taking place in the two-phase water-nitrobenzene system (M ²⁺ = Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺, UO₂ ²⁺, Fe²⁺, Co²⁺, and Ni²⁺; 1 = valinomycin; aq = aqueous phase, nb = nitrobenzene phase) were evaluated. Moreover, the stability constants of the 1 · M ²⁺ complexes in water saturated nitrobenzene were calculated; they were found to increase in the order Fe²⁺ < Cd²⁺, Co²⁺ < Ni²⁺ < UO₂ ²⁺, Zn²⁺ < Cu²⁺ < Pb²⁺. Correspondence: Emanuel Makrlík, Faculty of Applied Sciences, University of West Bohemia, Pilsen, Czech Republic.     

The stability constants of some bivalent metal complexes of α-hydroxyisobutyrate and lactate

The stability constants of the lactate and α-hydroxyisobutyrate complexes of Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺ and UO₂²⁺ were determined by potentiometric titration. The average ligand number exceeds 2, indicating the formation of ML⁺, ML₂ and ML₃^- complexes. The existence of ML₃^- complexes was confirmed by electrophoretic experiments; no polynuclear complexes were formed. α-Hydroxyisobutyrate forms stronger complexes than lactate.     

A new solvent system for the separation of Th4+, UO 2 2+ and Zr4+ in the presence of common anions by thin-layer chromatography

Summary A TLC method has been developed for separating Th⁴⁺, UO₂ ²⁺ and Zr⁴⁺ in the presence of some common anions using a dimethylamine/acetone/formic acid mobile phase. Capacity factors, separation factors and resolution for the separation of Th⁴⁺ from UO₂ ²⁺ have been evaluated. The effect of the pH of the sample on R_F values of Th⁴⁺, UO₂ ²⁺, Ni²⁺ and Cu²⁺ has also been examined.     

Preparation and metal binding behavior of poly(4-vinylbenzyl 2-hydroxyethyl) sulfoxide and sulfone

In order to explore the reuse properties of oxidized chelating resin containing sulfur after adsorption, two kinds of novel chelating resins, poly[4-vinylbenzyl-(2-hydroxyethyl)] sulfoxide (PVBSO) and poly[4-vinylbenzyl-(2-hydroxyethyl)] sulfone (PVBSO₂), were synthesized using poly[4-vinylbenzyl-(2-hydroxyethyl)] sulfide (PVBS) as material. Their structures were confirmed by FTIR and XPS. The adsorption properties and mechanism for metal ions such as Au³⁺, Pt⁴⁺, Pd²⁺, Hg²⁺, Cu²⁺, Ni²⁺, Fe³⁺, Pb²⁺, Cd²⁺, and Zn²⁺ were investigated. Experimental results showed that PVBSO had good adsorption and selective properties for Au³⁺, Pd²⁺ and Cu²⁺ when the coexisting ion was Pt⁴⁺, Ni²⁺, Pb²⁺ or Cd²⁺. In the aqueous system containing Cu²⁺ and Pb²⁺ or Cu²⁺ and Cd²⁺, PVBSO₂ only adsorbed Cu²⁺. The selective coefficients of PVBSO and PVBSO₂ were α_Au/Pt = 4.8, α_Au/Pd = 11.8, α_Pd/Pt = 10.9, α_Cu/Ni = 2.5, α_Cu/Cd = 41.2, α_Cu/Pb = ∞, α_Cu/Ni = 3.0, α_Cu/Cd = ∞, α_Cu/Pb = ∞, respectively.     

A quick and precise heterometric microdetermination of traces of palladium in metals with nitron

A heterometric study was made of the reaction between palladium chloride and nitron in thiocyanate solutions in the presence of excesses of various masking agents.A method is presented for the hetorometric determination of ~0.5 mg palladium in 20 ml aqueous solution with nitron, which can be carried out within 5–10 mn. The solution to be analysed may in general contain ~99.5% of the following foreign metals as cations: Ca⁺², Ba⁺², Mg⁺², Zn⁺², Mn⁺², Co⁺², Ni⁺², Al⁺³, Fe⁺³, Cr⁺³, UO₂⁺², Cu⁺², Cd⁺², Hg⁺², Pb⁺², Tl⁺, Sb⁺³,Bi⁺³, Th⁺⁴, Ce⁺³ and ZrO⁺². The error is between 0 and 1%.     

Preparation of Activated Carbon From Olive Stone Waste: Optimization Study on the Removal of Cu2+, Cd2+, Ni2+, Pb2+, Fe2+, and Zn2+ from Aqueous Solution Using Response Surface Methodology

The removal efficiencies of Cu²⁺, Cd²⁺, Ni²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ from aqueous solution with olive stone activated carbon (OSAC) were investigated in this paper. Central composite design method was used to optimize the preparation of OSAC by chemical activation using potassium hydroxide (KOH) as chemical agent. The optimum conditions obtained were 715°C activation temperature, 2 hours activation time, and 1.53 impregnation ratio. This resulted in removal of 99.25% Cu²⁺, 94.98% Cd²⁺, 99.08% Ni²⁺, 99.33% Pb²⁺, 99.41% Fe²⁺, and 99.17% Zn²⁺, as well as 73.94% OSAC yield. The surface characteristics of the activated carbon (AC) prepared under optimized condition were examined by pore structure analysis, scanning electron microscopy, and Fourier transform infrared spectroscopy. The Brunauer–Emmett–Teller (BET) surface area, total pore volume, and average pore diameter of the prepared activated carbon were 886.72 m²/g, 0.507 cm³/g, and 4.22 nm, respectively. The equilibrium data of the adsorption was well fitted to the Langmuir and the highest value of adsorption capacity (Q) on the OSAC was found for Fe²⁺ (57.47 mg/g), followed by Pb²⁺ (22.37 mg/g), Cu²⁺ (17.83 mg/g), Zn²⁺ (11.14 mg/g), Ni²⁺ (8.42 mg/g), and Cd²⁺ (7.80 mg/g). The prepared OSAC can be used for efficient removal of metals from contaminated wastewater.     

Bulgarian natural diatomites: modification and characterization

Natural Bulgarian diatomite modified by oxidation with sulfuric acid and H₂O₂ or by coating with manganese oxide was characterized considering its chemical composition, surface area, pore volume, and structure. Modified diatomites displayed larger surface area and pore volumes in comparison with untreated natural diatomite, which favored their sorption behavior. Sorption properties of diatomites towards Fe³⁺, Pb²⁺, Cu²⁺, Cd²⁺, Mn²⁺, Ni²⁺, Co²⁺, Cr³⁺, Pd²⁺, Ca²⁺, and Mg²⁺ were investigated and their sorption capacities were determined. Sorption properties of manganese oxide-modified diatomite were superior to those of diatomite modified by oxidation. Owing to its high sorption capacity towards Co²⁺, Ni²⁺, Pb²⁺, Cr³⁺, Fe²⁺, Cu²⁺, and Cd²⁺, the manganese oxide-modified diatomite is a promising low-cost sorbent for selective removal of milligram amounts of these toxic metal ions from contaminated water.     

Über die Extrahierbarkeit von Metallverbindungen der Diphenylarsinsäure

Zusammenfassung Es wird über die Möglichkeit berichtet, Metallionen aus wäßriger Lösung mit Hilfe organischer Lösungsmittel als Verbindungen der Diphenylarsinsäure extrahieren zu können. Von den untersuchten Ionen Fe³⁺, Al³⁺, Bi³⁺, Cr³⁺, UO₂ ²⁺, Zn²⁺, Cd²⁺, Cu²⁺, Co²⁺, Ni²⁺, Mn²⁺, Be²⁺, Pb²⁺, Ca²⁺ und Mg²⁺ sind mit Chloroform nur Pb²⁺, Bi³⁺, Be²⁺, Zn²⁺ und Al³⁺ extrahierbar. Mit Trichloräthylen ist praktisch nur mehr Pb²⁺ extrahierbar, während Benzol und Essigester keinerlei Extraktionswirkung zeigen. Vergleiche mit dem Verhalten aliphatischer Arsinsäuren werden angestellt.

---

Summary A report is given concerning the possibility of extracting metal ions from aqueous solution by means of organic liquids as compounds of diphenylarsinic acid. The ions investigated included Fe³⁺, Al³⁺, Bi³⁺, UO₂ ²⁺, Zn²⁺, Cr³⁺, Cd²⁺, Cu²⁺, Co²⁺, Ni²⁺, Mn²⁺, Be²⁺, Pb²⁺, Ca²⁺, and Mg²⁺. Of these only Pb²⁺, Bi³⁺, Be²⁺, Zn³⁺ and Al³⁺ are extractable with chloroform. With trichloro ethylene only Pb²⁺ is extractable, whereas benzene and acetic ester show no extraction action. Comparisons were made with the behavior of aliphatic arsinic acids.

---

Résumé On décrit la possibilité d'extraction d'ions métalliques à l'état de composés de l'acide diphénylarsinique, à partir de leur solution aqueuse, à l'aide d'un solvant organique. Parmi les ions étudiés, Fe³⁺, Al³⁺, Bi³⁺, Cr³⁺, UO₂ ²⁺, Zn²⁺, Cd²⁺, Cu²⁺, Co²⁺, Ni²⁺, Mn²⁺, Be²⁺, Pb²⁺, Ca²⁺ et Mg²⁺, seuls Pb²⁺, Bi³⁺, Be²⁺, Zn²⁺ et Al³⁺ peuvent être extraits par le chloroforme. Le trichloréthyléne ne permet que l'extraction du Pb²⁺, cependant que le benzène et l'ester acétique ne manifestent aucune activité d'extraction. On établit une comparaison avec le comportement des acides arsiniques aliphatiques.

     

Microdetermination of uranium (VI)

Summary A new method has been evolved for the separation and estimation of UO₂ ²⁺ from Cu²⁺, Zn²⁺, Ag⁺, Pb²⁺, Ga³⁺, In³⁺, Tl³⁺, La³⁺, Ti⁴⁺, Zr⁴⁺ and Th⁴⁺ with the sodium salt of benzilic acid as precipitating and chelating agent andn-butanol as solvent for solvent extraction. All these cations except UO₂ ²⁺ are precipitated by benzilic acid; UO₂ ²⁺ forms a deep yellow complex extractable byn-butanol. The uranium can be determined in the organic phase spectrophotometrically at 430 nm. The pH range over which the separation can be carried out is 2.6–4.0. Few anions and cations interfere.

---

Zusammenfassung Eine neue Methode der Trennung und Bestimmung von UO₂ ²⁺ neben Cu²⁺, Zn²⁺, Ag⁺, Pb²⁺, Ga³⁺, In³⁺, Tl²⁺, La³⁺, Ti⁴⁺, Zr⁴⁺ und Th⁴⁺ wurde ausgearbeitet. Das Natriumsalz der Benzilsäure dient als Färbungs- und Komplexbildungsmittel und n-Butanol zur Extraktion. Alle angeführten Kationen mit Ausnahme von UO₂ ²⁺ werden von Benzilsäure gefällt; UO^{2 2+} bildet einen tiefgelben, mit n-Butanol extrahierbaren Komplex und kann in der organischen Phase spektrophotometrisch bei 430 nm bestimmt werden. Die Trennung kann bei pH 2,6 bis 4,0 durchgeführt werden. Nur wenige Anionen und Kationen stören.

---

Résumé On développe une nouvelle méthode pour la séparation et l'évaluation de UO₂ ²⁺ dans Cu²⁺, Zn²⁺, Ag⁺, Pb²⁺, Ga³⁺, In³⁺, Tl³⁺, La³⁺, Ti⁴⁺, Zr⁴⁺ et Th⁴⁺, par le sel de sodium de l'acide benzilique comme agent précipitant et chélatant et le N-butanol comme solvant pour l'extraction par solvant. Tous ces cations, sauf UO₂ ²⁺, précipitent par l'acide benzilique; UO₂ ²⁺ forme un complexe jaune intense que l'on peut extraire par le N-butanol. On peut doser l'uranium en phase organique par spectrophotométrie à 430 nm. La séparation peut s'effectuer dans le domaine de pH de 2,6 à 4,0. Peu d'anions et de cations interfèrent.

     

Synthesis of a Dithiocarbamate Chelate Resin and Its Oxidized form and Their Adsorption Properties for Heavy Metal Ions

A series of macroporous dithiocarbamate chelate resins, III and V, and an oxidized resin, VI, with high adsorption capacity were prepared. The influence of various reaction conditions of amination, dithiocarboxylation, and oxidation were examined. The structure and the conversion of functional groups of resins were confirmed by IR spectra and elemental analysis. The adsorption capacities of Resin II for Hg²⁺, Cu²⁺, Zn²⁺, and Cd²⁺ are 4.40, 2.44, 1.77, and 1.36 mmol/g, respectively. The adsorption capacities of Resins V and VI for Cu²⁺. Zn²⁺, Ni²⁺, Co³⁺, Ag⁺, Hg²⁺, Cd²⁺, Pb²⁺, and Au³⁺ are 4.07–0.51 and 3.81–0.59 meq ion/g, respectively. The adsorption rate and the influence of pH on the adsorption percentage of the resins for metal ions were examined. Noble metal, transitional metal, and heavy metal ions can be quantitatively adsorbed by the resins. The adsorbed Cu²⁺, Pb²⁺, Cd²⁺, Co³⁺, and Ni²⁺ can be quantitatively eluted with 5N HNO₃, and the presence of large amounts of Ca²⁺, Mg²⁺, Fe³⁺, and Al³⁺ did not interfere.     

Interaction of actinide ions with [NaP5W30O110]14- and [P2W18O62]6-

Stability constants (log b₁₀₁) of Th⁴⁺, UO₂ ²⁺, NpO₂ ⁺ and Am³⁺ with [NaP₅W₃₀O₁₁₀]^14- were determined by solvent extraction (m = 0.1M NaCl) and found to be 6.18±0.07, 3.80±0.06, 2.98±0.04, and 5.85±0.05, respectively. The order of stability constants: Th⁴⁺>Am³⁺>UO₂ ²⁺>NpO₂ ⁺ is due to electrostatic repulsion between the actinyl oxygens and oxygens on the polyoxometalate surface. The order of stability constants for metal complexes with [P₂W₁₈O₆₂]^6- is Th⁴⁺>UO₂ ²⁺>Eu³⁺>NpO₂ ⁺ because the steric repulsion between actinyl oxygens and oxygens on polyoxometalate are less important. Enthalpies of complexation were measured by calorimetric titration of Th⁴⁺, UO₂ ²⁺, Nd³⁺ with [NaP₅W₃₀O₁₁₀]^14- and [P₂W₁₈O₆₂]^6-. The results indicate that the conformation and charge distribution of the microscopic surface structures are important factors in the formation of pseudocolloids.     

A Lead‐Selective Membrane Electrode Based Upon a Phosphorylated Hexahomotrioxacalix[3]Arene

Solvent extraction of a mixture of Pb^II, Mn^II, Fe^III, Co^II, Ni^II and Cd^II in aqueous perchlorate medium by a phosphorylated hexahomotrioxacalix[3]arene (calix‐3) in dichloromethane shows a significant selectivity towards lead ions. The ligand can also be incorporated into a membrane to provide a new lead ion‐selective electrode (Pb^II‐ISE). A plasticized PVC membrane containing 30% PVC, 53.5% ortho‐nitrophenyloctylether (NPOE), 4.5% sodium tetraphenylborate (NaTPB) and 12% ionophore was directly coated on a graphite rod. This sensor gave a good Nernstian response of 29.7 ± 0.7 mV decade^?1 over a concentration range of 1 × 10^?8 – 1 × 10^?4 M of lead ions, independent of pH in the range 3‐7, with a detection limit of 0.4 × 10^?8 M. The dynamic response time of the electrode to achieve a steady potential was very fast and found to be less than 7 s. The selectivity relative to Ag⁺, NH₄⁺, Li⁺, Na⁺, K⁺, Ca²⁺, Sr²⁺, Ba²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Fe³⁺, La³⁺, Sm³⁺, Dy³⁺, Er³⁺, Y³⁺ and Th⁴⁺ was examined. The electrode exhibits adequate stability with good reproducibility (with a slope of 29.6 ± 1.5 mV for 8 weeks). The characteristics of the sensor are compared with those of a tetraphosphorylated calix[4]arene (calix‐4) based Pb^II‐ISE, reported recently. The electrode was successfully used as an indicator electrode for a potentiometric titration of a lead solution using a standard solution of EDTA. The applicability of the sensor for lead ion measurements in various synthetic samples was also investigated.     

Amphotere Ionenaustauscherharze

Zusammenfassung N-Methyl--aminopropionsäure-Harz bindet infolge Komplexbildung Cu²⁺, UO₂ ²⁺, Bi³⁺, Cr³⁺ und Fe³⁺, während Ni²⁺, Co²⁺, Zn²⁺, Mn²⁺, Cd²⁺, Pb²⁺, Be²⁺, Tl⁺, NH₄ ⁺, Alkali-, Erdalkali- und Seltenerdionen keine Kapazität zeigen. Durch Variation des pH-Wertes, der Temperatur und Neutralsalzzusatz kann die Selektivität noch erhöht werden. Die analytische Anwendbarkeit wird an Hand von Trennungen binärer Gemische belegt, die oft als Filtrationsverfahren mit geringem Arbeits- und Zeitaufwand durchgeführt werden können.

---

Summary N-Methyl--aminopropionic acid (MAP) containing resin binds Cu²⁺, UO₂ ²⁺, Bi³⁺, Cr³⁺ and Fe³⁺ due to its coordinating tendencies, whereas Ni²⁺, Co²⁺, Zn²⁺, Mn²⁺, Cd²⁺, Pb²⁺, Be²⁺, Tl⁺, NH₄ ⁺, alkalines, alkaline earths and rare earths are not retained. The selectivity can be increased by variation of pH, temperature and inert-salt background. Analytical applications have been shown by separations of binary mixtures. Sometimes these separations are simple and rapid filtration operations.

---

---

1. Mitteilung: Kühn, G., u. E. Hoyer: J. prakt. Chem. (im Druck).

---

Dem Direktor des Instituts für Anorganische Chemie, Herrn Prof. Dr. H. Holzapfel, gilt unser Dank für das entgegengebrachte Interesse und die Überlassung von Institutsmitteln.

---

Herrn Doz. Dr. R. Hering, Güstrow, danken wir für wertvolle Hinweise.     

Syntheses,structures of N‐(substituted)‐2‐aza‐[3]‐ferrocenophanes and their application as redox sensor for Cu2+ ion

Rigid N‐(substituted)‐2‐aza‐[3]‐ferrocenophanes L1 and L2 were easily synthesized from 1,1 ‐dicarboxyaldehydeferrocene and the corresponding amines. Ligands L1 and L2 were characterized by ¹H NMR, ¹³C NMR and single‐crystal X‐ray crystallography. The coordination abilities of L1 and L2 with metal ions such as Cu²⁺, Mg²⁺, Ni²⁺, Zn²⁺, Pb²⁺ and Cd²⁺ were evaluated by cyclic voltammetry. The electrochemical shift (ΔE_1/2) of 125 mV was observed in the presence of Cu²⁺ ion, while no significant shift of the Fc/Fc + couple was observed when Mg²⁺, Ni²⁺, Zn²⁺, Pb²⁺, Cd²⁺ metal ions were added to the solution of L1 in the mixture of MeOH and H₂O. Moreover, the extent of the anodic shift of redox potentials was approximately equal to that induced by Cu²⁺ alone when a mixture of Cu²⁺, Mg²⁺, Ni²⁺, Zn²⁺, Pb²⁺ and Cd²⁺ was added to a solution of L1. Ligand L1 was proved to selectively sense Cu²⁺ in the presence of large, excessive first‐row transition and late‐transition metal cations. The coordination model was proposed from the results of controlled experiments and quantum calculations. Copyright © 2012 John Wiley & Sons, Ltd.     

Complexation of metal ions with double-armed diazadithia lariat ether carrying anthracene moieties in acetonitrile–dioxane

A new 14-membered crown ether with nitrogen–sulfur donor atom carrying two anthryl groups was designed and synthesized by the reaction of the corresponding macrocyclic compound and 9-(chloromethyl) anthracene. The influence of metal cations such as Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ on the spectroscopic properties of the ligand was investigated in acetonitrile–dioxane solution (1/1) by means of absorption and emission spectrometry. The results of spectrophotometric titration experiments disclosed the complexation stoichiometry and complex stability constant of the novel ligand with Fe²⁺, Fe³⁺, Al³⁺, Cd²⁺, Cu²⁺, Zn²⁺, Pb²⁺ and Hg²⁺ cations. Absorption spectra show isobestic points in the spectrophotometric titration of these cations. The presence of excess of Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ cations caused an enhancement of anthryl fluorescence. Especially, the enhancement in case of the interaction of Hg²⁺ and Al³⁺ cations with the ligand was pronounced.     

Specific Uphill Transport of Zinc as Zn(SCN)42− Ion using Na+-Dicyclohexyl-18-Crown-6 as Carrier

Sodium-dicyclohexyl- 18-crown-6 complex cation was used as carrier for the uphill transport of zinc as Zn(SCN)₄^2? complex anion. By using L-cysteine as a metal ion acceptor in the receiving phase at the optimized pH of 7.6, the amount of zinc transport through the liquid membrane after 90 min was 97.2 ± 1.0%. The selectivity and efficiency of zinc transport from aqueous solutions containing equimolar mixtures of Ag⁺, Cd²⁺ Co²⁺, Cu²⁺, Fe²⁺, Ni²⁺, Pb²⁺, Pd²⁺, Sr²⁺, Bi³⁺, Cr³⁺ and Fe³⁺ ions was investigated. In the presence of NH₂OH.HCl as a suitable masking agent in the source phase, the interfering effect of Cu²⁺ and Pb²⁺ ions was diminished drastically.     

Individual extraction constants of some divalent metal cations in the two-phase water-phenyltrifluoromethyl sulfone system

From extraction experiments and γ-activity measurements, the exchange extraction constants corresponding to the general equilibrium \textM ²⁺ ( \textaq ) + \textSr ²⁺ ( \textorg ) ? \textM ²⁺ ( \textorg ) + \text Sr ²⁺ ( \textaq ) {\text{M}}^{ 2+ } \left( {\text{aq}} \right) + {\text{Sr}}^{ 2+ } \left( {\text{org}} \right) \Leftrightarrow {\text{M}}^{ 2+ } \left( {\text{org}} \right) + {\text{ Sr}}^{ 2+ } \left( {\text{aq}} \right) taking place in the two-phase water–phenyltrifluoromethyl sulfone (abbrev. FS 13) system (M²⁺ = Mg²⁺, Ca²⁺, Ba²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺, \textUO₂^{2 +} {\text{UO}}_{2}^{2 + } , Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺; aq = aqueous phase, org = FS 13 phase) were evaluated. Furthermore, the individual extraction constants of the M²⁺ cations in this two-phase system were calculated; they were found to increase in the series of Mg²⁺, \textUO₂^{2 +} {\text{UO}}_{2}^{2 + }  < Ca²⁺, Co²⁺ < Cd²⁺, Ni²⁺ < Zn²⁺ < Cu²⁺, Mn²⁺, Fe²⁺ < Pb²⁺ < Ba²⁺.     

Nanometer-sized alumina coated with chromotropic acid as solid phase metal extractant from environmental samples and determination by inductively coupled plasma atomic emission spectrometry

A method for solid phase extraction of trace metals such as Cd²⁺, Cr⁶⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni²⁺, Pb²⁺ and Zn²⁺ using nanometer-sized alumina coated with chromotropic acid prior to determination by inductively coupled plasma atomic emission spectrometry (ICP-AES) has been developed. Various influencing parameters on the separation and preconcentration of trace metals, pH, flow rate, sample volume, amount of adsorbent, concentration of eluent and sorption kinetics have been studied. The detection limits for Cd²⁺, Cr⁶⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni²⁺, Pb²⁺ and Zn²⁺ were found to be 0.14, 0.62, 0.22, 0.54, 0.27, 0.28, 0.53 and 0.38 ng ml^− 1, respectively. The adsorption capacity of the solid phase adsorption material is 10.3, 11.3, 14.5, 16.4, 15.1, 11.7, 15.4 and 16.8 mg g^− 1 for Cd²⁺, Cr⁶⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni^2+, Pb²⁺ and Zn²⁺, respectively. The preconcentration factor was obtained in the range of 50-100 for all studied metal ions. Coexisting ions over a high concentration range have not shown any significant effects on the determination of aforesaid metal ions. The accuracy of the proposed method was tested by standard reference materials (NIST 1643e: water, NIST 1573a: tomato leaves and NIST 1568a rice flour) and natural waters and the results obtained were in good agreement with the certified values.     

Zur komplexometrischen Titration von Molybd?n

Zusammenfassung Es wird gezeigt, daß die komplexometrische Molybdän(V)-bestimmung, über die wir kürzlich berichteten, auch im Mikrobereich bei Verwendung von 0,005 m Maßlösungen durchführbar ist. Der Fehler beträgt bei mehrfacher Endpunktseinstellung ±0,02 mg Mo.Im weiteren wird über den Einfluß von Fremdionen berichtet. Cl^–, SO₄ ^2–, NO₃ ^–, PO₄ ^3–, Acetat, Tartrat, Citrat, Alkalien, Erdalkalien und Mn²⁺ stören nicht. Durch Zusatz von Weinsäure und Fluorid können Ti⁴⁺, Nb⁵⁺, Ta⁵⁺, W⁶⁺, Th⁴⁺, Al³⁺, Ce³⁺, La³⁺ und U⁴⁺ maskiert werden.Die Ionen Bi³⁺, Cd²⁺, Zn²⁺, Co²⁺, Ni²⁺, Cu²⁺, Hg²⁺, V⁴⁺, Cr³⁺ und Pb²⁺ stören durch Komplexbildung mit ÄDTA. Fe²⁺ stört durch Reduktion des Kupfers.Abschließend wird an Hand einiger Analysen von Molybdänlegierungen die Anwendbarkeit der Methode in der Praxis gezeigt. Der dabei auftretende Fehler beträgt maximal ±0,5 Relativprozent.