Unusually stable aqueous lyotropic gyroid phases from gemini dicarboxylate surfactants

Aqueous lyotropic liquid crystal (LLC) assemblies with bicontinuous cubic morphologies (Q-phases) have shown promise in applications ranging from selective chemical separations to ion transporting media, yet universal design criteria for amphiphiles that adopt these unique structures remain elusive. Recent reports have demonstrated that cationic gemini surfactants exhibit a tendency to form bicontinuous cubic LLCs as compared to single-tail amphiphiles; however, the universality of this surfactant design motif in stabilizing Q-phases remains untested. Herein, we report the modular synthesis of a new class of anionic gemini surfactants derived from aliphatic carboxylic acids and demonstrate their unexpectedly strong propensity to form gyroid LLC phases with unprecedented stability between 25 and 100 °C over amphiphile concentration windows up to 20 wt % wide. By systematically varying the alkyl spacer length and surfactant counterions (Na(+), K(+), and (CH(3))(4)N(+)), we identify molecular motifs that favor formation of technologically useful bicontinuous cubic LLC morphologies.     

Phase polymorphism by mixing of poly(oxyethylene)-poly(dimethylsiloxane) copolymer and nonionic surfactant in water

The phase behavior of the water/poly(oxyethylene)-poly(dimethylsiloxane) copolymer (Si25C3EO51.6)/pentaoxyethylene dodecyl ether (C12EO5) ternary system has been studied. Both the silicone copolymer and the surfactant have equal volumes of hydrophilic and lipophilic parts; i.e., these are balanced amphiphiles. Although only a lamellar phase is observed in water-Si25C3EO51.6 and water-C12EO5 binary systems, a variety of liquid crystalline phases, including normal micellar cubic (I1), hexagonal (H1), bicontinuous cubic (V1), lamellar (L(alpha)), reverse bicontinuous cubic (V2), and reverse hexagonal (H2), are observed in the copolymer-rich region of the ternary phase diagram. The small C12EO5 molecules dissolve at the hydrophobic interface in the thick bilayer of the Si25C3EO51.6 L(alpha) phase occupying a large area of the total interface of the aggregates and modulate the curvature of the aggregates. Hence a variety of self-assembled structures are observed. In contrast, Si25C3EO51.6 is not dissolved in the thin bilayer of the C12EO5 lamellar phase (L'(alpha)). Hence, the C12EO5 L'(alpha) phase coexists with copolymer-rich L(alpha) and H2 phases. Consequently, small surfactant molecules are dissolved in a large silicone copolymer aggregate to induce a change in layer curvature, but a large copolymer molecule is hard to incorporate with surfactant aggregates.     

Templating Polymerization of Dodecylammonium Surfactants with Polymerizable (Meth)acrylate Counter Ions

Both dodecylammonium acrylate (I) and dodecylammonium methacrylate (II) are reactive surfactants in which the polymerizable group is the organic counterion. Templating polymerization of I and II from the lyotropic liquid crystalline (LLC) lamellar phase was successfully performed with conservation of the supramolecular structure. A 20 wt% aqueous solution of II formed cubic bicontinuous phases, even upon addition of divinyl benzene (DVB). Polymerization from the cubic phases was attempted without and with DVB (3 wt%). Bicontinuous cubic phases always evolved toward lamellar structures upon polymerization.     

Origin of lyotropic liquid crystalline mesophase formation and liquid crystalline to mesostructured solid transformation in the metal nitrate salt-surfactant systems

The zinc nitrate salt acts as a solvent in the ZnX-C(12)EO(10) (ZnX is [Zn(H(2)O)(6)](NO(3))(2) and C(12)EO(10) is C(12)H(25)(OCH(2)CH(2))(10)OH) lyotropic liquid crystalline (LLC) mesophase with a drastic dropping on the melting point of ZnX. The salt-surfactant LLC mesophase is stable down to -52 °C and undergoes a phase change into a solid mesostructured salt upon cooling below -52 °C; no phase separation is observed down to -190 °C. The ZnX-C(12)EO(10) mesophase displays a usual phase behavior with an increasing concentration of the solvent (ZnX) in the media with an order of bicontinuous cubic(V(1))-2D hexagonal(H(1))--a mixture of 2D hexagonal and micelle cubic(H(1) + I)-micelle cubic(I)-micelle(L(1)) phases. The phase behaviors, specifically at low temperatures, and the first phase diagram of the ZnX-C(12)EO(10) system was investigated using polarized optical microscopy (POM), X-ray diffraction (XRD), differential scanning calorimetry (DSC), Fourier transform infrared (FTIR), and Raman techniques and conductivity measurements.     

Nonionic diethanolamide amphiphiles with isoprenoid-type hydrocarbon chains: thermotropic and lyotropic liquid crystalline phase behaviour

The thermotropic and lyotropic liquid crystalline phase behaviour of a series of diethanolamide amphiphiles with isoprenoid-type hydrocarbon chains (geranoyl, H-farnesoyl, and phytanoyl) has been investigated. When neat, both H-farnesoyl and phytanoyl diethanolamide form a smectic liquid crystalline structure at sub-zero temperatures. In addition, all three diethanolamides exhibit a glass transition temperature at around -73 °C. Geranoyl diethanolamide forms a lamellar crystalline phase with a lattice parameter of 17.4 ? following long term storage accompanied by the loss of the glass transition. In the presence of water, H-farnesoyl and phytanoyl diethanolamide form lyotropic liquid crystalline phases, whilst geranoyl diethanolamide forms an L(2) phase. H-farnesoyl diethanolamide forms a fluid lamellar phase (L(α)) at room temperature and up to ～ 40 °C. Phytanoyl diethanolamide displays a rich mesomorphism forming the inverse diamond (Q(II)(D)) and gyroid (Q(II)(G)) bicontinuous cubic phases in addition to an L(α) phase.     

Aqueous phase behavior and dispersed nanoparticles of diglycerol monooleate/glycerol dioleate mixtures

The first part of this study concerns the aqueous phase behavior of mixtures of diglycerol monooleate (DGMO) and glycerol dioleate (GDO) examined by X-ray diffraction (XRD). The ternary phase diagram displays a multitude of liquid crystalline phases (polymorphism). With increasing GDO content the following phase sequence was observed: lamellar (L(alpha)); two reversed bicontinuous cubic phases (Q(230) and Q(224)); reversed hexagonal (H(II)); the reversed micellar (L(2)) phase. The second part deals with the preparation and characterization of aqueous dispersions of the reversed hexagonal phase in the presence of the nonionic triblock copolymer Pluronic F127. Submicrometer-sized monocrystalline H(II) phase particles were obtained, as evidenced by cryo-transmission electron microscopy (cryo-TEM), laser diffraction, and XRD, by use of a simple and reproducible preparation method including a heat-treatment step. Moreover, the particle size distributions of the H(II) phase nanoparticle dispersions were narrow as determined by laser diffraction measurements. Using XRD, we show that the polymeric stabilizer is depleted from the core of the hexagonal particles and preferentially located at the surface. It is concluded that the preferential distribution of stabilizing agents at particle surfaces is a prerequisite for the formation of structurally well-defined and kinetically stable H(II) phase particles (Hexosome).     

Effect of sodium diclofenac loads on mesophase components and structure

We studied the effect of a model electrolytic drug on intermolecular interactions, conformational changes, and phase transitions in structured discontinuous cubic QL lyotropic liquid crystals. These changes were due to competition with hydration of the lipid headgroups. Structural changes of the phase induced by solubilization loads of sodium diclofenac (Na-DFC) were investigated by directly observing the water, ethanol, and Na-DFC components of the resulting phases using 2H and 23Na NMR. Na-DFC interacted with the surfactant glycerol monoolein (GMO) at the interface while interfering with the mesophase curvature and also competed with hydration of the surfactant headgroups. Increasing quantities of solubilized Na-DFC promoted phase transitions from cubic phase (discontinuous (QL) and bicontinuous (Q)) into lamellar structures and subsequently into a disordered lamellar phase. Quadrupolar coupling of deuterated ethanol by 2H NMR showed that it is located near the headgroups of the lipid and apparently is hydrogen bonded to the GMO headgroups. A phase transition between two lamellar phases (L alpha to L alpha*) was seen by 23Na NMR of Na-DFC at a concentration where the characteristics of the drug change from kosmotropic to chaotropic. These findings show that loads of solubilized drug may affect the structure of its vehicle and, as a result, its transport across skin-blood barriers. The structural changes of the mesophase may also aid controlled drug delivery.     

"Sponge" nanoparticle dispersions in aqueous mixtures of diglycerol monooleate, glycerol dioleate, and polysorbate 80

Lipid nanoparticles of nonlamellar lyotropic phases have a wide solubilizing and encapsulating spectrum for a range of substances thanks to their nanostructured interior featuring both lipophilic and hydrophilic domains. As a consequence, these systems have emerged as promising drug delivery systems in various pharmaceutical and diagnostic applications. Here we present the phase behavior and dispersion properties of a novel three-component lipid system composed of diglycerol monooleate (DGMO), glycerol dioleate (GDO), and polysorbate 80 (P80) which shows several advantageous features relating to drug delivery applications including: spontaneous dispersion formation with a narrow size distribution and tunable particle phase-structure. The obtained phase diagram shows the presence of lamellar (L(alpha)), hexagonal (H(2)), and reverse bicontinuous cubic (V(2)) liquid crystalline phases and an inverse micellar (L(2)) solution. A particularly interesting observation is the presence of a phase region where two liquid phases coexist, most likely the L(2) and L(3) ("sponge phase"). These two phase structures appear also to coexist in the submicron particles formed in the dilute water region, where the L(3) element appears to stabilize nanoparticles with inner L(2) structure. Increasing the fraction of the dispersing P80 component results in the growth of the more water rich L(3) "surface phase" at the expense of the size of the inner L(2) core.     

New lipid family that forms inverted cubic phases in equilibrium with excess water: molecular structure-aqueous phase structure relationship for lipids with 5,9,13,17-tetramethyloctadecyl and 5,9,13,17-tetramethyloctadecanoyl chains

With a view to discovering a new family of lipids that form inverted cubic phases, the aqueous phase behavior of a series of lipids with isoprenoid-type hydrophobic chains has been examined over a temperature range from -40 to 65 degrees C by using optical microscopy, DSC (differential scanning calorimetry), and SAXS (small-angle X-ray scattering) techniques. The lipids examined are those with 5,9,13,17-tetramethyloctadecyl and 5,9,13,17-tetramethyloctadecanoyl chains linked to a series of headgroups, that is, erythritol, pentaerythritol, xylose, and glucose. All of the lipid/water systems displayed a "water + liquid crystalline phase" two-phase coexistence state when sufficiently diluted. The aqueous phase structures of the most diluted liquid crystalline phases in equilibrium with excess water depend both on the lipid molecular structure and on the temperature. Given an isoprenoid chain, the preferred phase consistently follows a phase sequence of an H II (an inverted hexagonal phase) to a Q II (an inverted bicontinuous cubic phase) to an L alpha (a lamellar phase) as A* (cross-section area of the headgroup) increases. For a given lipid/water system, the phase sequence observed as the temperature increases is L alpha to Q II to H II. The present study allowed us to find four cubic phase-forming lipid species, PEOC 18+4 [mono- O-(5,9,13,17-tetramethyloctadecyl)pentaerythritol], beta-XylOC 18+4 [1- O-(5,9,13,17-tetramethyloctadecyl)-beta- d-xylopyranoside], EROCOC 17+4 [1- O-(5,9,13,17-tetramethyloctadecanoyl)erythritol], and PEOCOC 17+4 [mono- O-(5,9,13,17-tetramethyloctadecanoyl)pentaerythritol]. The values of T K (hydrated solid-liquid crystalline phase transition temperature) of the cubic phase-forming lipids are all below 0 degrees C. Quantitative analyses of the lipid molecular structure-aqueous phase structure relationship in terms of the experimentally evaluated "surfactant parameter" allow us to rationally select an optimum combination of hydrophilic/hydrophobic part of a lipid molecule that will form a desired phase in a desired temperature range.     

Thermotropic and lyotropic phase behaviour of monoalkyl glycosides

We have studied the thermotropic and lyotropic phase behaviour of seven monoalkyl glycosides using polarizing microscopy, differential scanning calorimetry and X-ray diffraction. The phase behaviour of these non-ionic surfactants is compared with that of two previously studied monoalkyl glycosides \[1]. We have found that small modifications in chemical structure can lead to large changes in the phase behaviour. The results reveal the effect of changes in alkyl glycoside chemical structure on the phase behaviour, in particular, on the melting point, the clearing point, the solubility in water, and the extent of the lamellar and curved phases. Seven out of the nine surfactants were found to exhibit thermotropic mesomorphism. Furthermore, in the presence of water, three formed lamellar (L ), type I cubic (Q ) and type I hexagonal (H ) phases, two formed lamellar and cubic phases, and two I I formed only lamellar phases. The cubic phase in each case was indexed, either from powderlike or monodomain samples, as spacegroup I a3 d . The lowest order low angle X-ray spacings were found to lie on single, continuous lines with varying water content across the L , Q and H phases, implying epitaxial relationships between these phases at the phase boundaries. I a a I     

Amphotropic liquid-crystalline behaviour of glycolipids in amino acid ionic liquids

We examined lyotropic liquid-crystalline behaviour of glycolipids (GLs) with a normal alkyl chain or a diacetylene-functionalised alkyl chain in several amino acid ionic liquids (AAILs). It was found that the mixtures of GL and AAIL form various nanosegregated liquid-crystalline phases, such as smectic, bicontinuous cubic and hexagonal columnar phases, depending on the two-component ratio and AAIL species. The observed liquid-crystalline behaviours were summarised as phase diagrams. It is noteworthy that the employment of amino acid anions with superior hydrogen-bonding ability, such as aspartic and glutamic acid anions, gives a phase diagram with a wide liquid-crystalline region. Comparing with a phase diagram obtained for the GL/water mixtures, we gained insights on the similarity/dissimilarity between water and AAILs as self-organisation media of amphiphiles. For the diacetylene-functionalised molecule, UV irradiation was carried out to progress polymerisation. It is of interest that the polymerisation reaction progressed when the glycolipid formed a smectic phase in an AAIL while a reaction progress was not found when it formed a bicontinuous cubic phase in another AAIL. We believe that AAILs have a great potential to be a liquid media not only for amphiphiles but for various functional materials, such as polymers and colloids, to form novel assemblies.     

Nanostructural studies on monoelaidin-water systems at low temperatures

In recent years, lipid based nanostructures have increasingly been used as model membranes to study various complex biological processes. For better understanding of such phenomena, it is essential to gain as much information as possible for model lipid structures under physiological conditions. In this paper, we focus on one of such lipids--monoelaidin (ME)--for its polymorphic nanostructures under varying conditions of temperature and water content. In the recent contribution (Soft Matter, 2010, 6, 3191), we have reported the phase diagram of ME above 30 °C and compared with the phase behavior of other lipids including monoolein (MO), monovaccenin (MV), and monolinolein (ML). Remarkable phase behavior of ME, stabilizing three bicontinuous cubic phases, motivates its study at low temperatures. Current studies concentrate on the low-temperature (<30 °C) behavior of ME and subsequent reconstruction of its phase diagram over the entire temperature-water composition space (temperature, 0-76 °C; and water content, 0-70%). The polymorphs found for the monoelaidin-water system include three bicontinuous cubic phases, i.e., Ia3d, Pn3m, and Im3m, and lamellar phases which exhibit two crystalline (L(c1) and L(c0)), two gel (L(β) and L(β*)), and a fluid lamellar (L(α)) states. The fluid isotropic phase (L(2)) was observed only for lower hydrations (<20%), whereas hexagonal phase (H(2)) was not found under studied conditions. Nanostructural parameters of these phases as a function of temperature and water content are presented together with some molecular level calculations. This study might be crucial for perception of the lyotropic phase behavior as well as for designing nanostructural assemblies for potential applications.     

Lattice-Boltzmann simulations of self-assembly of a binary water-surfactant system into ordered bicontinuous cubic and lamellar phases.

We used our recently developed mesoscale amphiphilic lattice-Boltzmann method (Nekovee, M.; Coveney, P. V.; Chen, H.; Boghosian, B. M. Phys. Rev. E 2000, 62, 8282-8894) to investigate the dynamics of self-assembly of the bicontinuous cubic phase in a binary water-surfactant system, and the transition from the lamellar structure to a bicontinuous cubic phase. Our study provides insight into how such structures emerge as a result of competing molecular interactions between water and amphiphiles and among amphiphilic molecules themselves, and represents the first application of any lattice-Boltzmann model to amphiphilic systems in three dimensions.     

Kinetics of low pH-induced lamellar to bicontinuous cubic phase transition in dioleoylphosphatidylserine∕monoolein

Recently, it has been well recognized that the modulation of electrostatic interactions due to surface charges can induce transitions between lamellar liquid-crystalline (L(α)) and inverse bicontinuous double-diamond cubic (Q(II)(D)) phases in biological lipids. To reveal their kinetic pathway and mechanism, we investigated the low pH-induced L(α) to Q(II)(D) phase transitions in 20%-dioleoylphosphatidylserine (DOPS)/80%-monoolein (MO) using time-resolved small-angle x-ray scattering and a rapid mixing method. At a final pH of 2.6-2.9, the L(α) phase was transformed completely into the hexagonal II (H(II)) phase within 2-10 s after mixing a low pH buffer with a suspension of multilamellar vesicles of 20%-DOPS∕80%-MO (the initial step). Subsequently, the H(II) phase slowly converted into the Q(II)(D) phase and completely disappeared within 15-30 min (the second step). The rate constants of the second step were obtained using the singular value decomposition analysis. On the basis of these data, we discuss the underlying mechanism of the kinetic pathway of the low pH-induced L(α) to Q(II)(D) phase transitions.     

SAXS investigation of a cubic to a sponge (L3) phase transition in self-assembled lipid nanocarriers

The encapsulation and release of peptides, proteins, nucleic acids, and drugs in nanostructured lipid carriers depend on the type of the self-assembled liquid-crystalline organization and the structural dimensions of the aqueous and membraneous compartments, which can be tuned by the multicomponent composition of the systems. In this work, small-angle X-ray scattering (SAXS) investigation is performed on the 'melting' transition of the bicontinuous double diamond cubic phase, formed by pure glycerol monooleate (MO), upon progressive inclusion of varying fractions of pharmaceutical-grade glycerol monooleate (GO) in the hydrated system. The self-assembled MO/GO mixtures are found to form diamond (Pn3m) inverted cubic, inverted hexagonal (H(II)), and sponge (L(3)) phases at ambient temperature in excess of aqueous medium without heat treatment. Mixing of the inverted-cubic-phase-forming MO and the sponge-phase-forming GO components, in equivalent proportions (50/50 w/w), yields an inverted hexagonal (H(II)) phase nanostructured carrier. Scattering models are applied for fitting of the experimental SAXS patterns and identification of the structural changes in the aqueous and lipid bilayer subcompartments. The possibility of transforming, at ambient temperature (20 °C), the bicontinuous cubic nanostructures into inverted hexagonal (H(II)) or sponge (L(3)) mesophases may facilitate novel biomedical applications of the investigated liquid crystalline self-assemblies.     

NMR self-diffusion measurements in inverse micellar cubic phases

Abstract

We have measured self-diffusion coefficients of amphiphile and water molecules in novel inverse micellar lyotropic cubic phases using the pulsed field gradient NMR technique. We investigated two different ternary lyotropic systems: oleic acid/sodium oleate/water, and dioleoylglycerol/dioleoylphosphatidylcholine/water. Both of these systems have previously been shown by one of us to form a cubic phase of space group Fd3m, whose structure is a complex packing of two types of disconnected quasi-spherical inverse micelles embedded in a 3D hydrocarbon matrix. The amphiphile translational diffusion coefficients determined for the first time by ¹H NMR in both systems are surprisingly large. Thus the self diffusion coefficients of amphiphiles may not provide a reliable way of distinguising inverse micellar from inverse bicontinuous phases. The water self-diffusion coefficient has been determined to have a value of 2·4 × 10^?12 m² s^?1, a value which is more than two orders of magnitude lower than that typically observed for inverse bicontinuous cubic phases. This confirms unambiguously the inverse micellar topology of the Fd3m cubic phase, and indicates that the value of the water diffusion coefficient should permit inverse micellar and inverse bicontinuous structures to be reliably distinguished, even for systems where the structure has not been previously determined by diffraction.     

A highly oriented cubic phase formed by lipids under shear

We demonstrate the formation of a macroscopically oriented inverse bicontinuous cubic (Q(II)) lipid phase from a sponge (L(3)) phase by controlled hydration during shear flow. The L(3) phase was the monoolein/butanediol/water system; the addition of water reduces the butanediol concentration, inducing the formation of a diamond (Q(II)(D)) cubic phase, which is oriented by the shear flow. The phenomenon was reproduced in both capillary and Couette geometries, indicating that this represents a robust general route for the production of highly aligned bulk Q(II) samples, with applications in nanomaterial templating and protein research.     

Structural and rheological investigation of Fd3m inverse micellar cubic phases

In the present study we demonstrate that a bulk inverse micellar cubic phase of Fd3m structure can be obtained by adding a hydrophobic component, such as the food-grade limonene, to the binary system monolinolein/water in a well-defined composition. The Fd3m structure studied in this work had a very slow kinetics of formation, as a consequence of partitioning of water into two types of micelle populations with different sizes. The Fd3m structure formed at a ratio of limonene oil to total lipids of alpha = 0.4 is stable in the bulk up to a maximum hydration of 12.68 wt % water, beyond which it starts to coexist with dispersed water. At full hydration, by combining small-angle X-ray scattering and available topological models, the inverse micellar cubic phase of Fd3m structure was shown to be formed by 16 small micelles and 8 larger micelles per cubic lattice cell (Q227 group), with radii of the micellar polar cores ranging between 1 and 3 nm and 149-168 monolinolein molecules per micelle depending on the water content. The temperature dependence of the structural and rheological properties of the Fd3m mesophase was investigated using SAXS, rheology, and turbidimetry. It appeared that the Fd3m phase underwent crystallization below 18 degrees C and began melting in an inverse microemulsion (L2 phase) coexisting with water above 28.5 degrees C with complete melting obtained at 40-45 degrees C, as evidenced by SAXS and rheology. Macroscopic phase separation between the L2 phase and excess water was observed with time at higher temperatures. The investigation of the viscoelastic properties of the Fd3m inverse discrete micellar cubic phase revealed a rheological signature similar to that of the bicontinuous cubic phases Pn3m and Ia3d observed in homologous binary systems. However, the Fd3m phase presented a complex set of slower relaxation mechanisms leading to a shift by 1 order of magnitude of the dominant relaxation times and whole relaxation spectrum, as compared to those of inverse bicontinuous cubic phases. These findings have been tentatively explained by (i) the multiple relaxation of micelles upon deformation, (ii) the small hydration level of the Fd3m phase, and (iii) the low temperature at which this phase can be observed.     

Kinetics of lamellar-to-cubic and intercubic phase transitions of pure and cytochrome c containing monoolein dispersions monitored by time-resolved small-angle X-ray diffraction

We investigated the effect of incorporation of a small aqueous peripheral membrane protein (cyt c) into the three-dimensional periodic nanochannel structures formed by the lipid monoolein (MO) on its rich phase behavior as a function of temperature, pressure, and protein concentration using synchrotron X-ray small-angle diffraction. By simultaneous use of the pressure-jump relaxation technique and time-resolved synchrotron X-ray diffraction, we also studied the kinetics of various lipid mesophase transformations of the system for understanding the mechanistic pathways of their formation influenced by the protein-lipid interactions. Cyt c incorporated into the bicontinuous cubic phase Ia3d of MO has a significant effect on the lipid structure and the pressure stability of the system already at low protein concentrations. Concentrations higher than 0.2 wt % of cyt c led to an increase in interfacial curvature due to interaction of the protein with the lipid headgroups. This promotes the formation of a new, probably partially micellar cubic phase of crystallographic space group P4(3)32. Upon pressurization, the P4(3)32 phase undergoes a phase transition to a cubic Pn3m phase with smaller partial specific volume. Increase in protein concentration increases the pressure stability of the P4(3)32 phase. The formation of this phase from the cubic phase Pn3m is a slow process taking many seconds and having a time lag in the beginning. It seems to occur as a two-state process without ordered intermediate states. At temperatures above 60 degrees C, the P4(3)32 phase is unable to accommodate the unfolded protein and transforms to a bicontinuous cubic Ia3d phase. Time-resolved small-angle X-ray scattering studies show that the L(alpha) --> Ia3d transition in pure MO dispersions under limited hydration conditions occurs within a time interval of 1 s at 35 degrees C preceded by a lag phase of 1.5 s. The Ia3d cubic phase initially forms with a much larger lattice constant due to hydration and experiences an initially lower curvature that relaxes within about 1 s. Interestingly, no other cubic phases are involved as intermediates in the transition, i.e., the gyroid cubic phase is able to form directly from the L(alpha) phase. The mechanism behind the L(alpha) --> Ia3d transition in pure MO dispersions has been discussed within the framework of recent stalk models for membrane fusion. In the presence of cyt c, the L(alpha) --> Ia3d transition is much slower. The rather long relaxation times of the order of seconds are probably due to a kinetic trapping of the system and limitation by the transport and redistribution of water and lipid in the evolving new lipid phases. We also studied the transition from the pure lamellar L(alpha) phase to the Ia3d-P4(3)32 two phase region and observed a rather complex transition behavior with transient lamellar and cubic intermediate states.     

On structural transitions in a discontinuous micellar cubic phase loaded with sodium diclofenac

An intermediate mesophase of lyotropic liquid crystalline structure from the ternary mixtures of glycerol monooleate, water, and ethanol was recently characterized in our lab. This mesophase, termed Q(L), consists of discrete discontinuous micelles arranged in a cubic array. The Q(L) phase can solubilize very significant loads of water-insoluble anti-inflamatory drug sodium diclofenac (Na-DFC). Close examination of the internal structures of the lyotropic liquid structure upon increasing the solubilization loads reveals the existence of three structural transitions controlled by the Na-DFC levels. Up to 0.4 wt% Na-DFC, the Q(L) structure remains intact with some influence on the hydration of the headgroups and on the intermicellar forces. However, at 0.8 to 1.2 wt% Na-DFC, the discontinuous micellar cubic phase is transformed into a more condensed mesophase of a bicontinuous cubic phase. At > or =1.2 wt% Na-DFC, the cubic phase is converted into a lamellar phase (L(alpha)). Within 5.5 to 7.3 wt% Na-DFC the mesophase is progressively transformed into a less ordered lamellar structure. At 12 wt% Na-DFC crystals tend to precipitate out. At low Na-DFC concentrations the drug behaves like a lyotropic or kosmotropic salt and can salt-out the surfactant from its water layer, but at higher levels it behaves like a hydrotropic, chaotropic salt and can salt-in the surfactant. The Na-DFC location and position within the interface as well as its polarization and partial ionization are strongly affected by its solubilization contents and the structure that it is inducing. In the cubic phase the drug is located less close to the hydration layer while once transition occurs it is exposed more to the water layer and the surfactant headgroups.