A general method for coulometric titration of alkylanilines with bromine

A general method is described for the coulometric titration of alkylanilines with anodically generated bromine. The reaction is carried out in water-acetic acid medium and the reactivity is governed by varying the water content and the concentration of bromide ion and by the addition of pyridine. In this way most types of alkylanilines can be titrated quantitatively. Unlike the case for alkylphenols, the bromine consumption is not always higher in the pyridine-containing media than in the pyridine-free. The bromine consumption is also more dependent on the bromide content of the medium than it is for alkylphenols. The mean relative error, for the best medium for each compound, is +/-0.9% for primary alkylanilines, +/-0.9% for secondary and +/-1.2% for tertiary.     

Determination of free, total, and esterified cholesterol by high-performance liquid chromatography

A method is described for measuring free, total, and esterified cholesterol in blood serum in which reversed-phase liquid chromatography is used and the eluate is monitored at 200 nm. The sample for total cholesterol is prepared according to the Abell-Kendall procedure, and for free cholesterol an extract of serum--isopropanol (1:5, v/v) is used. The column is a muBondapak C18, 10 micrometers, and the mobile phase for total cholesterol is isopropanol--acetonitrile (50:50, v/v); for free cholesterol, it is isopropanol--acetonitrile--water (60:30:10). An approximation of the free cholesterol, triglycerides, and individual cholesteryl esters is obtained from single chromatograms of isopropanol extracts of serum if the first mobile phase is used. In a comparison study with the Abell-Kendall method for total cholesterol, the correlation is excellent and the precision is acceptable.     

The method of moments for multiplet deconvolution in gamma-ray spectrometry

The method of moments is described for deconvolution of a mixture of identical distributions; it is not necessary to know the type of the individual peak distribution. The algorithm for computing the positions and contributions of the peaks forming the multiplet is presented. The real shape of the peak is used. The computational stability of the method of moments for the deconvolution of various types of convolved triple peaks is shown to be satisfactory. The algorithm is used for deconvolution of some double peaks obtained in neutron activation analysis of rock standards. The program is fast and suitable for microcomputers.     

Suitability of nitric-sulphuric acid decomposition for the determination of tungsten and molybdenum in geochemical exploration

A mixture of nitric and sulphuric acids is used for the decomposition of geochemical samples for the estimation of tungsten. In the resulting sample solution tungsten is determined colorimetrically by the dithiol method. The decomposition procedure suggested works well for scheelite mineral. However wolframite is only partially decomposed. The same sample solution is used for estimation of molybdenum by the thiocyanate method. The method is suitable for batch analysis and results in a high throughput.     

Utilization of a computer using programless language for radiation protection management

Utilization of the computer for radiation control is planned and performed in many radioisotope laboratories. But each laboratory has their own situation which makes the planning difficult with respect to the hardware and particularly to the software. What is the most important is that the practice of radiation management is different for each laboratory both in point of view and in the form of recording. Therefore, the computer program for the radiation management, especially for the management of radioisotopes is required to meet many amendments. In this standpoint, we have developed a "programless language" or "programless software" and have used in our work for several years. As the result of our experience, we have found that the programless language is quite satisfactory for the management of radioisotopes and that it has an advantage in some aspects over conventional programs. It is thought that this "programless language" is effective not only for our own works, but also applicable to other radioisotope laboratories.     

Asymptotic quantum yield of triplet sensitized decomposition

The asymptotic quantum yield of triplet energy transfer is found by calculating the fraction of acceptor molecules with energy above the minimum energy for decomposition. This is done by allowing for a statistical energy distribution among the internal modes in the collision complex. It is found that for a monatomic triplet donor most of the triplet energy is transferred to the acceptor molecule, while for a polyatomic donor molecule only a fraction of it is available for future decomposition of the acceptor.     

Polarographic determination of methyl methacrylate

The permanganate oxidation of methyl methacrylate in weakly acidic solution yields methyl pyruvate. Hydroxylamine hydrochloride is used for destroying the excess of permanganate. At the same time it is consumed for oximation of the pyruvate, and the resulting oxime is determined polarographically. The reaction scheme of permanganate oxidation of methyl methacrylate is suggested and optimum working conditions are found both for permanganate oxidation and for polarographic determination. The method is used for the determination of vapours of methyl methacrylate in the air, for industrial hygiene purposes.     

Gas bubbles in simulation and experiment

An experimental setup for the examination of single bubbles, rising in a liquid, is presented. Its main part is a rotating chamber, in which the bubble is spatially stabilized by a balance of buoyancy, drag, and lift forces. This allows for long observation periods in time. Experimental results are presented for air bubbles in silicone oil. The experimental results are validated by a comparison with numerical simulations. A modified, mass-conserving level-set method is used for the representation of the free interface, while an immersed-boundary formulation is engaged for the conservation equations. The agreement between experiment and simulation, and to available correlations from literature, is found to be perfect. It is shown that the influence of the liquid shear due to the rotation is negligible. Also, for the presented liquid system, no influence by Marangoni stresses could be found, which makes the system of air and silicone oil a good choice for validation purposes.     

Kjeldahl nitrogen analysis as a reference method for protein determination in dairy products

Measurement of total nitrogen by Kjeldahl analysis is the historical reference method for determination of the protein content of dairy products and is used for both calibration and validation of alternative methods for protein determination. Accurate evaluation of alternative methods is not possible if there is large uncertainty regarding the reference values. When Kjeldahl analysis is used to establish reference values, the performance of the Kjeldahl testing must be verified and within established expectations. Advice is given for Kjeldahl system optimization, evaluation of test results, and trouble-shooting. Techniques for successful Kjeldahl nitrogen analysis of dairy products other than milk are discussed.     

399 - A diffusion model for the latency of an electroretinogram

The diffusion model of Cone for the latency of the b-wave in the electroretinogram is discussed. It is shown that Cone's original is valid only if the time of illumination is short compared to the latency. A general relation between the intensity of illumination and the latency is derived which holds for arbitrary illumination times. This theoretical result is compared with recent experimental data for the electroretinogram of the frog. By fitting two parameters, good agreement between theory and experiment is achieved. From these parameters an estimate is obtained for the diffusion length of the transmitter substance.     

The orbital relaxation energy for single and double ionizations from valence shells of CH4, NH3, H2O and HF

The orbital relaxation energy is defined for single and double ionizations of valence electrons, and is calculated for CH₄, NH₃, H₂O and HF molecules with the ab initio SCF method. It is shown that the orbital relaxation energy for the ionization from a bonding orbital is about half of that for a non-bonding orbital, and the orbital relaxation energy for the double ionization is about double of that for the single ionization. This result gives a theoretical foundation for the empirical method of interpret Auger electron spectra by using experimental single ionization potentials.     

Metal salt catalyzed carbenoids—XII: General considerations

A systematology for carbene transfer (MT) processes based on apparent molecularities of the product determining step is proposed. An analysis is made of potential conformation effects for copper(I) and copper(II) based carbenoids and a systematology for purposes of nomenclature is proposed for conformations of penta-coordinated systems based upon trigonal bipyramides and tetragonal pyramides. The possible role of valence state is examined and the hazards of applying spin state correlations to carbenoids in parallel with the methods used for carbenes is discussed. Basic guidelines for generating data suitable for internal and external comparisons are given.     

Multi-Physics Modeling of Solid Oxide Fuel Cell Fueled by Methane and Analysis of Carbon Deposition

Internal reformation of low steam methane fuel is important for the high e ciency and low cost operation of solid oxide fuel cell. Understanding and overcoming carbon deposition is crucial for the technology development. Here a multi-physics model is established for the relevant experimental cells. Balance of electrochemical potentials for the electrochemical reactions, generic rate expression for the methane steam reforming, dusty gas model in a form of Fick's model for anode gas transport are used in the model. Excellent agreement between the theoretical and experimental current-voltage relations is obtained, demonstrating the validity of the proposed theoretical model. The steam reaction order in low steam methane reforming reaction is found to be 1. Detailed information about the distributions of physical quantities is obtained by the numerical simulation. Carbon deposition is analyzed in detail and the mechanism for the coking inhibition by operating current is illustrated clearly. Two expressions of carbon activity are analyzed and found to be correct qualitatively, but not quantitatively. The role of anode diffusion layer on reducing the current threshold for carbon removal is also explained. It is noted that the current threshold reduction may be explained quantitatively with the carbon activity models that are only qualitatively correct.     

High-performance liquid chromatographic method for the quantitative analysis of a synthetic copolymer with antitumor activity (copovithane) and methylamine in human blood plasma and urine

A method for the determination of a synthetic polymeric compound with antitumor activity (copovithane) and methylamine in blood plasma and urine is described. Copovithane is prepared by radical polymerisation of a diurethane with N-vinylpyrrolidone. The method is based on high-performance liquid chromatography of the methylamine hydrochloride which arises during the hydrochloric acid hydrolysis of the parent substance. The methylamine hydrochloride is converted to the trinitrobenzenesulphonyl derivative for the purpose of chromatographic detection. The limit of determination for copovithane in blood plasma is 1.2 mg/l and in urine 1.5 mg/day. The determination limit for methylamine in blood plasma is 0.2 mg/l and in urine 0.3 mg/day. The imprecision is dependent on the sample, and amounts to +/- 6.8% for blood plasma and +/- 6.4% for urine.     

An improved SCPF scheme for polarization energy calculations

Convergence of the Self-Consistent Polarization Field (SCPF) method of polarization energy calculations for organic molecular materials is analysed. Use of the Conjugate Gradients method for solving the SCPF equations is proposed. Efficiency of both the original and the newly proposed approach is compared for selected model systems. Brief discussion of the factors influencing the performance of Krylov-space-based methods for polarization energy calculations is presented.     

Determination of Co, Cu, Fe, Ga, W, and Zn in rocks by neutron activation and anion-exchange separation

A neutron-activation method for the simultaneous determination of cobalt, copper, gallium, iron, tungsten and zinc in rocks is described. The method is based on anion-excbange separation in hydrochloric acid media. Chemical yield is higher than 97% for all elements, except for tungsten, where the recovery of the carrier is established by re-activation. The precision is about 1-3% for the iron determination and about 3% for cobalt, copper, gallium and zinc.     

Start‐up of electrophoresis of an arbitrarily oriented dielectric cylinder

An analytical study is presented for the transient electrophoretic response of a circular cylindrical particle to the step application of an electric field. The electric double layer adjacent to the particle surface is thin but finite compared with the radius of the particle. The time‐evolving electroosmotic velocity at the outer boundary of the double layer is utilized as a slip condition so that the transient momentum conservation equation for the bulk fluid flow is solved. Explicit formulas for the unsteady electrophoretic velocity of the particle are obtained for both axially and transversely applied electric fields, and can be linearly superimposed for an arbitrarily‐oriented applied field. If the cylindrical particle is neutrally buoyant in the suspending fluid, the transient electrophoretic velocity is independent of the orientation of the particle relative to the applied electric field and will be in the direction of the applied field. If the particle is different in density from the fluid, then the direction of electrophoresis will not coincide with that of the applied field until the steady state is attained. The growth of the electrophoretic mobility with the elapsed time for a cylindrical particle is substantially slower than for a spherical particle.     

Hydrogen bonded clusters of alcohol molecules in inert solvents: a chain statistics approach

A theory is proposed for modeling the autoassociation of alcohol molecules either in the neat liquid or in inert (non-complexing) solvents. This autoassociation by hydrogen bonds takes the form of clusters which can be predominantly open or cyclized chains, depending on the concentration. Chain conformation statistics are used for calculating the dipole moment of each type of chain. Cyclization equilibrium theory is employed for obtaining formulae for the fraction of all types of clusters. The total Kirkwood angular correlation factorg is calculated in function of the concentration. For this only two parameters are used; the first one is a common equilibrium constant for H bond dissociation; the second one is closely linked to the stiffness of the chains. A numerical illustration is presented for the case of normal hexanol in various aliphatic solvents, for which several dielectric data exist in the literature.     

Statistical mechanical theory for steady-state systems. III. Heat flow in a Lennard-Jones fluid

A statistical mechanical theory for heat flow is developed based upon the second entropy for dynamical transitions between energy moment macrostates. The thermal conductivity, as obtained from a Green-Kubo integral of a time correlation function, is derived as an approximation from these more fundamental theories, and its short-time dependence is explored. A new expression for the thermal conductivity is derived and shown to converge to its asymptotic value faster than the traditional Green-Kubo expression. An ansatz for the steady-state probability distribution for heat flow down an imposed thermal gradient is tested with simulations of a Lennard-Jones fluid. It is found to be accurate in the high-density regime at not too short times, but not more generally. The probability distribution is implemented in Monte Carlo simulations, and a method for extracting the thermal conductivity is given.     

Universal calibration equations in gel permeation chromatography: polymers in good solvents

The error involved in universal calibration equations containing the characteristic constant for the unperturbed dimensions is assessed for polymers having similar polymer-solvent interactions. It is concluded that the maximum difference between this approach and the universal calibration approach based on hydrodynamic volume is 8% for polyethylene. The suggestion that the error may be as high as 30%, in particular for poly(vinyl chloride), is shown to be a result of the use of an inaccurate value for the unperturbed dimensions. A new universal calibration equation, containing the Mark-Houwink exponent as well as constants for the unperturbed dimensions, is proposed and is shown to differ from the universal calibration equation based on hydrodynamic volume by less than 2.5% for polyethylene.