A proton and optic dual-control molecular switch based on photochromic diarylethene bearing a rhodamine unit

A novel fluorescent switch based on rhodamine B and photochromic diarylethene, 1-[2-methyl-5-(4-methoxylphenyl)-3-thienyl]-2-[2-methyl-5-(4-rhodamine B hydrazine-Schiff base-phenyl)-3-thienyl]perfluorocyclopentene (1), has been successfully synthesized through the condensation of rhodamine B hydrazine and 1-[2-methyl-5-(4-methoxylphenyl)-3-thienyl]-2-[2-methyl-5-(4-formylphenyl)-3-thienyl]perfluorocyclopentene. UV and FL measurements reveal that the compound exhibits good photochromic properties responsive to proton and optic dual inputs. Upon irradiation with 297 nm light, the colorless solution of compound 1 turns blue, while the blue solution becomes colorless after irradiated with visible light (λ>450 nm). Furthermore, upon an addition of H⁺, the fluorescence resonance energy transfers from the rhodamine unit (FRET donor) to the closed-ring diarylethene unit (FRET acceptor), although no energy transfer occurs when the diarylethene is in the open-ring form. The emission intensity of the rhodamine can be modulated with proton and UV/vis light and molecular-level signal communication has been constructed, indicating high potentials of the compound in molecular switches or naked eye recognition systems.     

A highly selective fluorescence switch for Cu2+ and Fe3+ based on a new diarylethene with a triazole-linked rhodamine 6G unit

A new diarylethene compound with a triazole-linked rhodamine 6G unit attached to the imino group (1O) was designed and synthesized. According to the test results, the solution color and fluorescence color of diarylethene can be modulated by lights and metal ions. The solution color could change from colorless to light purple when irradiated with UV light. When Cu²⁺ was added to the diarylethene solution, the color of diarylethene solution became blue, the fluorescence color turned from dark to bright yellow. Although the solution color did not change by adding Fe³⁺, its fluorescence color varied from dark to yellow. Moreover, it was found that the complex ratio of the diarylethene to Cu²⁺ was 1:1 and the binding stoichiometry of the diarylethene to Fe³⁺ was also 1:1 based on the data of NMR, MS, and other experiments. Based on these findings, photochromic figure of the diarylethene with UV/Vis light, Cu²⁺ and Fe³⁺ was constructed. Furthermore, the logic circuit was designed by input signals (ultraviolet stimulus, visible light stimulus, Cu²⁺ (or Fe³⁺) and EDTA) and an output signal (fluorescent intensity at 566?nm (or 575?nm)).     

Rhodamine based derivative and its zinc complex: synthesis and recognition behavior toward Hg(II)

A simple fluorescent probe, which contains rhodamine and aminoquinoline moieties, was designed and prepared for selective detection of Hg²⁺ in acetonitrile. RbQ exhibited high selectivity and sensitivity toward Hg²⁺ over other common metal ions. The recognition of RbQ toward Hg²⁺ can be detected by fluorescence spectra, absorption spectra, and even by naked eyes. The binding ratio of the RbQ–Hg²⁺ complex was found to be 1:1 according to Job plot experiment, and the limit of detection was 1.05×10⁻⁷ M. Moreover, the prepared complex RbQ–Zn²⁺ (RbQZ) could detect Hg²⁺ in a ratiometric way and showed lower limit of detection (2.95×10⁻⁸ M) than RbQ in the same condition. Finally, we also demonstrated that the aminoquinoline–zinc complex could be served as a new and effective FRET donor for rhodamine derivatives.     

A highly selective fluorescence turn-on detection of Al3+ and Ca2+ based on a coumarin-modified rhodamine derivative

A fluorescent chemosensor 1 was synthesized containing a coumarin moiety bound to rhodamine B hydrazide. Compound 1 displayed different fluorescence emission responses to Al³⁺ and Ca²⁺ ions with high quantum yields (0.64 and 0.15, respectively) and low detection limits (3.0 × 10^–8 and 9.4 × 10^–8 M, respectively). The possible binding modes of compound 1 with Al³⁺ and Ca²⁺ ion were calculated using a Job plot, HRMS, ¹H NMR spectroscopic titration and IR spectroscopy. Moreover, the calcium in 1-Ca²⁺ could be displaced by Al³⁺ ions, resulting in another ratiometric sensing signal output, which indicates that 1-Ca²⁺ could detect Al³⁺ ions in a ratiometric way. Bioimaging results also demonstrated that compound 1 could act as an intracellular Al³⁺ ion imaging sensor.     

A fluorescent sensor for Hg and Ag functions as a molecular switch based on click-generated triazole moiety

The novel (S)-BINOL-based sensor 1 incorporating triazole moieties could be obtained by click reaction. The results show that 1 can exhibit excellent fluorescence response behaviors toward Hg²⁺ (selective switching-off) and Ag⁺ (selective switching-on) without interference from other metal ions, which functions as a molecular switch. This work can expand the application of click reaction in design and synthesis of the novel fluorescence sensor molecules.     

A novel rhodamine-based turn-on probe for fluorescent detection of Au3+ and colorimetric detection of Cu2+

In this work, we design and synthesize the novel probe RC through introduction the 1-aza-4,13-dithia-15-crown-5 ring into the structure of rhodamine 6G hydrazide, where the N atom of crown ring is responsible for quenching of rhodamine fluorescence. The compound obtained behaves as multifunctional cation sensor providing selective fluorescent response to Au³⁺ and selective colorimetric response to Cu²⁺ ions in aqueous acetonitrile (1/1, v/v) at pH 7.0. The use of 10^?5?M RC solution allowed reliable determination of target cations in the presence of a wide range of environmentally relevant ions with detection limits of 2?×?10^?6?M and 5?×?10^?7?M for gold and copper, respectively.     

A novel turn-on fluorescent probe for Hg2+ detection based on rhodamine B spirolactam derivative

ABSTRACT

In this work, a new turn-on fluorescent probe 1 for Hg²⁺ ions detection based on rhodamine B spirolactam was reported. Among tested metal ions, probe 1 shows high selectivity towards Hg²⁺ in the the mixture solution of methanol and 0.02 M HEPES buffer (V/V = 9:1, pH = 7.2). No absorption and emission band of probe 1 was observed in the range from 450 to 700 nm. While only addition of Hg²⁺ to probe 1 could lead to appearance of a new absorption band centered at 553 nm and a fluorescence emission band around 577 nm upon excitation at 520 nm. Moreover, it exhibits excellent linear relationship (R² = 0.9993) between fluorescence intensity at 577 nm and the concentration of Hg²⁺ from 1.6 to 32 μM. The sensing mechanism was proven to be spirolactam ring open induced by Hg²⁺ through ¹H NMR, MS, absorption and fluorescence spectra. In addition, probe 1 could detect Hg²⁺ in real water samples and on filter paper, which demonstrates its application in environment science.     

A Fluorescent and Colorimetric Probe Based on Isatin-appended Rhodamine for the Detection of Hg2+

A new fluorescent probe for the detection of Hg²⁺ was designed and synthesized via attaching N-methylisatin to rhodamine B hydrazide through an imine linkage. In an ethanol-Tris buffer medium, the addition of Hg²⁺ caused a strong orange fluorescence and a visual color change from colorless to pink. Other coexisting metal ions did not interfere with the detection of Hg²⁺. The research on the detection of Hg²⁺ in natural water suggested the possibility of practical applications in environment monitoring. Based on ESI-MS analysis, the Hg²⁺-sensing mechanism was proposed.     

Novel fluorescent sensor for Ag and Hg based on the BINOL-pyrene derivative via click reaction

A novel BINOL-pyrene derivative sensor 1 for Ag⁺ and Hg²⁺ incorporating the triazole moieties and pyrenes was synthesized via click reaction. Binding of Ag⁺ ion induces the formation of 1:1 Ag⁺-1 chelating complex, and occurs in a ratiometric manner through an enhanced monomer and declining excimer emission, which make it possible to ratiometrically detect Ag⁺. The competitive experiment shows 1 can be used as an Ag⁺ specific fluorescence sensor over a wide range of competing cations. In the meanwhile, the sensor 1 was found to be selectively quenched by only Hg²⁺ at both monomer and excimer emission. Furthermore, we obtained evidences for different fluorescence signaling behaviors with Ag⁺ and Hg²⁺ by ¹H NMR titration experiments.     

Ratiometric fluorescence chemosensors for copper(II) and mercury(II) based on FRET systems

A system based on FRET mechanism, comprising a coumarin donor and a rhodamine acceptor, was developed for the selective and quantitative detection of metal ions. Fluorescent chemosensors RCs, linked by 1,2-diethylamine, exhibit significant fluorescence enhancement and excellent selectivity toward Cu²⁺. Fluorescent probes CRB and CR6G, linked by hydrazide, function as ratiometric receptors for Cu²⁺ chromogentically and fluorogentically in organic-aqueous media. Furthermore, the characteristic rhodamine-based fluorescence response of CRB (excitation at 550 nm) exhibits high selectivity for Hg(II). The construction of this kind of universal FRET system opens a broader prospect for future design of ratiometric fluorescent probes.     

A highly selective fluorescent sensor for Ca2+ and Sr2+ based on diarylethene with a furan-carbohydrazide unit

A fluorescent sensor based on diarylethene has been designed and synthesized. The sensor not only exhibited excellent photochromic properties, but also has distinguishing ability for Ca²⁺ and Sr²⁺ from other metal ions. Upon addition of Ca²⁺ and Sr²⁺, its emission intensity enhanced 27-fold and 24-fold respectively, accompanied by the emission peak shifted from 439 nm to 484 nm for Ca²⁺, and to 479 nm for Sr²⁺. The 1:1 stoichiometry between the sensor and the two ions was confirmed by Job's plot and HRMS. The LOD for Ca²⁺ and Sr²⁺ was determined to be 9.4 × 10^?8 mol L^?1 and 7.2 × 10^?8 mol L^?1, respectively. Furthermore, the sensor was applied in the detection of Ca²⁺ and Sr²⁺ in practical samples successfully.     

Two Rhodamine-based Turn on Chemosensors with High Sensitivity,Selectivity, and Naked-Eye Detection for Hg2+

Two novel rhodamine-based fluorescence enhanced molecular probes (RA₁ and RA₂) were synthesized, which were both designed as comparative fluoroionophore and chromophore for the optical detection of Hg²⁺. The recognizing behaviors were investigated both experimentally and computationally. They exhibited high selectivity and sensitivity for Hg²⁺ over other commonly coexistent metal ions in CH₃CN/H₂O (1:1, V/V) solution. Test shows that hydroxy benzene of rich electron was beneficial to the chelate of Hg²⁺ with sensors. The detection limit was measured to be at least 0.14 μmol/L. After addition of Hg²⁺, the color changed from colourless to pink, which was easily detected by the naked eye in both solution and hydrogel sensor.     

A highly selective fluorescent probe for Hg based on a rhodamine-coumarin conjugate

A fluorescent probe 1 for Hg²⁺ based on a rhodamine-coumarin conjugate was designed and synthesized. Probe 1 exhibits high sensitivity and selectivity for sensing Hg²⁺, and about a 24-fold increase in fluorescence emission intensity is observed upon binding excess Hg²⁺ in 50% water/ethanol buffered at pH 7.24. The fluorescence response to Hg²⁺ is attributed to the 1:1 complex formation between probe 1 and Hg²⁺, which has been utilized as the basis for the selective detection of Hg²⁺. Besides, probe 1 was also found to show a reversible dual chromo- and fluorogenic response toward Hg²⁺ likely due to the chelation-induced ring opening of rhodamine spirolactam. The analytical performance characteristics of the proposed Hg²⁺-sensitive probe were investigated. The linear response range covers a concentration range of Hg²⁺ from 8.0 × 10⁻⁸ to 1.0 × 10⁻⁵ mol L⁻¹ and the detection limit is 4.0 × 10⁻⁸ mol L⁻¹. The determination of Hg²⁺ in both tap and river water samples displays satisfactory results.     

A new fluorescence probe based on diarylethene with a benzothiazine unit for selective detection of Cd2+

A novel photochromic diarylethene derivative containing a benzothiazine unit has been synthesized. Its photochromism and fluorescent selectivity to metal ions were studied in detail in methanol solution. Under the stimulation of Cd²⁺ ions, the derivative showed a significant fluorescence enhancement and obvious red shift, accompanied by the fluorescent color changed from dark purple to bright blue. The 1: 1 stoichiometry between the derivative and Cd²⁺ was verified by titration experiments and high resolution mass spectrometry. In addition, a molecular logic circuit was designed with the emission intensity at 476?nm as output and the stimuli of Cd²⁺/EDTA and UV/vis as inputs.     

A fluorescent sensor for Al3+ based on a photochromic diarylethene with a hydrazinobenzothiazole Schiff base unit

A new fluorescent turn-on chemosensor for Al³⁺ based on a diarylethene unit was designed and synthesized. Photochromism, fluorescence switch, and metal ion recognition behaviors of this diarylethene derivative were investigated by absorption and fluorescence emission spectra. It shows an outstanding fluorometric sensing ability toward Al³⁺ ion, and the detection limit was measured to be 9.3 × 10^?8 mol L^?1 via fluorescence methods. Based on these interesting properties, a combinational logic circuit was constructed successfully.     

A fluorescent probe for Hg2+sensing in solutions and living cells with a wide working pH range简

In this paper, 2-carboxybenzaldehyde rhodamine B thiohydrazine(1) was synthesized and developed as a fluorescent probe to recognize Hg2+in DMF/H2 O(1:9, v/v) solution with high selectivity. The probe can be applied to the quanti?cation of Hg2+with a linear concentration range covering from 1.0×10-7mol/L to 1.0×10-5mol/L(R2= 0.9985) and a detection limit of 4.2×10-8mol/L. The experiment results show that the response of probe 1 to Hg2+is pH-independent in a wide range from 4.0 to 9.0. Moreover, the probe 1 exhibits excellent selectivity toward Hg2+over other common metal cations. Most importantly, the probe can be employed to monitor Hg2+in living cells using fluorescent imaging technique with satisfied results.     

Au nanoparticles based ultra-fast “Turn-On” fluorescent sensor for detection of biothiols and its application in living cell imaging

Au or other metal nanostructures have the ability to strongly quench the fluorescence of fluorophores.This feature has made AuNP-conjugates attractive for the construction of platforms for various bioanalytes to overcome the limitations of small molecule fluorophores(poor solubility,long reaction time).In this paper,an ultrafast "Turn-On" fluo rescent sensor for biothiols was constructed.The sensor is based on the fluorescent resonance energy transfer(FRET) effect between the fluorophore(PN) and AuNPs,which effectively quenches the fluorescence of the fluorophore.In the presence of thiols,PN is displaced and released from AuNP surfaces,and thus,the fluorescence is rapidly restored.The sensor features appreciable water solubility and ultrafast response time(a few seconds for Cys).In addition,it exhibits high selectivity and a detection limit as low as 12 nmol/L for Hcy.Moreover,the sensor presents good biocompatibility and has been successfully applied for imaging biothiols in living cells.     

Synthesis and properties of three novel rhodamine-based fluorescent sensors for Hg2+

Three novel rhodamine-based Hg~(2+) fluorescent sensors were designed and synthesized. The sensors could work in semi-aqueous solutions with nearly neutral p H and showed high selectivity and sensitivity to Hg~(2+) with remarkable fluorescence enhancement. For these three sensors, the linear working range broadened(0–80, 0–100 and 0–140 μmol/L, respectively) and the sensitivity increased(7.7, 15.5 and 17.6 folds of the fluorescence enhancement and 512, 66.2 and 37.6 ppb of the detection limit) with the rising of the thiourea-unit numbers. Furthermore the sensors exhibited excellent interference immunity to multiple environmentally and biologically relevant metal ions. Pond and tap water assay showed good practicability of the sensors. The number of the bound Hg~(2+) equaling to that of the thiourea units and the irreversible recognition process implied a new interaction way between Hg~(2+) and the sensor.     

Bifunctional probe for Cu2+/Al3+ based on a diarylethene with a 4, 5-[bis-(5-ethylacetate-yl)-2-thienyl]-1H-imidazole unit

A new asymmetric perfluordiarylethene (1O) was synthesized using 4, 5-[bis-(5-ethylacetate-yl)-2-thienyl]-1H-imidazole as a functional group. 1O exhibited favorable reversible cyclization and cycloreversion reactions upon alternating irradiation with UV and visible light. Both of its open- and closed-ring isomers were found to be highly selective towards Cu²⁺ with significant absorption and color changes, which could be used as a ‘naked-eye’ colorimetric sensor for Cu²⁺ detection. Upon exposure to acid, its fluorescence dramatically enhanced by 14-fold with a color change from dark to bright cyan due to the formation of the protonated compound. Moreover, 1O showed obvious fluorescence “turn-on” signal response towards Al³⁺, and the detection limit for Al³⁺ was determined to be 4.8 × 10^?9 mol L^?1. Based on the fluorescence signals of 1O, a combinational stimuli logic circuit were designed by using the fluorescence intensity as the output signal with the inputs of lights, Al³⁺ and EDTA. Finally, 1O could be used as a biological probe for detecting intracellular Al³⁺ in a physiological environmental.