Application of Nanocrystalline Graphite‐like Pyrolytic Carbon Film Electrode in the Electroanalytical Determination of Famotidine

Direct electro‐oxidation of famotidine at different graphitic carbon‐based electrode materials was evaluated. These materials included conventional electrodes of edge‐plane pyrolytic graphite, basal‐plane pyrolytic graphite, carbon paste, and glassy carbon as well as nano‐structured carbon‐based materials such as pyrolytic carbon film, carbon nanotube, and nano‐graphene. Raman spectroscopy and scanning electron microscopy were employed to analyze their structural and morphological features. It was found that the pyrolytic carbon film electrode, after a simple and fast anodic activation, shows superior electroanalytical performance. The method was successfully applied for the electroanalytical determination of famotidine in tablet dosage forms and urine samples.     

Exploring the electrocatalytic sites of carbon nanotubes for NADH detection: an edge plane pyrolytic graphite electrode study

The electrocatalytic properties of multi-walled carbon nanotube modified electrodes toward the oxidation of NADH are critically evaluated. Carbon nanotube modified electrodes are examined and compared with boron-doped diamond and glassy carbon electrodes, and most importantly, edge plane and basal pyrolytic graphite electrodes. It is found that CNT modified electrodes are no more reactive than edge plane pyrolytic graphite electrodes with the comparison with edge plane and basal plane pyrolytic graphite electrodes allowing the electroactive sites for the electrochemical oxidation of NADH to be unambiguously determined as due to edge plane sites. Using these highly reactive edge plane sites, edge plane pyrolytic graphite electrodes are examined with cyclic voltammetry and amperometry for the electroanalytical determination of NADH. It is demonstrated that a detection limit of 5 microM is possible with cyclic voltammetry or 0.3 microM using amperometry suggesting that edge plane pyrolytic graphite electrodes can conveniently replace carbon nanotube modified glassy carbon electrodes for biosensing applications with the relative advantages of reactivity, cost and simplicity of preparation. We advocate the routine use of edge plane and basal plane pyrolytic graphite electrodes in studies utilising carbon nanotubes particularly if 'electrocatalytic' properties are claimed for the latter.     

Analytical procedure for the simultaneous voltammetric determination of toxic metals in dialysis fluids

A new analytical voltammetric procedure for the simultaneous determination of copper(II), lead(II), cadmium(II), zinc(II), chromium(VI), and manganese(II) in two kinds of dialysis fluid (peritoneal and haemodialysis fluids) is described. The voltammetric measurements were performed using, as working electrode, a stationary mercury electrode, and a platinum electrode and a Agmid R:AgClmid R:KCl ((sat.)) electrode as auxiliary and reference electrodes, respectively, employing 0.1 mol L(-1) dibasic ammonium citrate solution pH 6.9 as supporting electrolyte. For all the elements, the accuracy, expressed as relative recovery R%, was very satisfactory being in the range 94-105%, the precision, expressed as relative standard deviation s(r)%, was lower than 6%, while the limits of detection were of the order of a few units of microg L(-1). The analytical voltammetric procedure has been validated by comparison with spectroscopic (graphite furnace atomic absorption spectroscopy, GFAAS) measurements.     

CVD graphene vs. highly ordered pyrolytic graphite for use in electroanalytical sensing

We explore and contrast the electroanalytical performance of a commercially available CVD grown graphene electrode with that of edge- and basal-plane pyrolytic graphite electrodes constructed from highly ordered pyrolytic graphite for the sensing of biologically important analytes, namely β-nicotinamide adenine dinucleotide (NADH) and uric acid (UA). We demonstrate that for the analytes studied here, in the best case, the electroanalytical performance of the CVD-graphene mimics that of edge plane pyrolytic graphite, suggesting no significant advantage of utilising CVD-graphene in this context.     

Edge Plane Pyrolytic Graphite Electrodes for Stripping Voltammetry: a Comparison with Other Carbon Based Electrodes

The first examples of using edge plane pyrolytic graphite electrodes for anodic and cathodic stripping voltammetry (ASV and CSV) are presented, notably the ASV of silver and the CSV of manganese. In the former example, detection limits for silver (based on 3σ) of 8.1 nM and 0.185 nM for 120 s and 300 s accumulation time, respectively, were achievable using the edge plane electrode, which were superior to those observed on glassy carbon, basal plane pyrolytic graphite and boron‐doped diamond electrodes. In the second example, a detection limit for manganese of 0.3 μM was possible which was comparable with that achievable with a boron‐doped diamond electrode but with an increased sensitivity. Comparison of the edge plane pyrolytic graphite electrode with boron‐doped diamond electrodes reveals that the edge plane electrode has comparable detection limits and sensitivities whilst exhibiting a lower signal‐to‐noise ratio and large potential window for use in trace analysis suggesting boron‐doped diamond can be conveniently replaced by edge plane pyrolytic graphite as an electrode material in many applications.     

A simple electroanalytical methodology for the simultaneous determination of dopamine,serotonin and ascorbic acid using an unmodified edge plane pyrolytic graphite electrode

A simple method using an unmodified edge plane pyrolytic graphite electrode (EPPGE) is reported for the simultaneous determination of dopamine (DA), serotonin (ST) and ascorbic acid (AA). The performance of this electrode is superior to other unmodified carbon-based electrodes and also to many modified electrodes in terms of detection limit, sensitivity and peak separation for determination of DA, ST and AA. Using this method, detection limits of 90 nM, 60 nM and 200 nM were obtained for DA, ST and AA respectively. No electrode fouling is observed during a set of experiments and good sensitivity is obtained for the simultaneous determination of DA, ST and AA. The peaks for the three species are well resolved from each other and the electrode is successfully utilised for their determination in standard and real samples.      

Edge Plane Pyrolytic Graphite Electrodes for Halide Detection in Aqueous Solutions

The behavior of chloride, bromide and iodide at edge plane pyrolytic graphite electrodes has been explored in aqueous acid solutions. The voltammetric response in each case has been compared with that of basal plane pyrolytic graphite, glassy carbon and boron‐doped diamond. The electrochemical oxidation of chloride is found to only occur on boron‐doped diamond while the electrochemical reversibility for the oxidation of bromide on edge plane pyrolytic graphite is similar to that seen at glassy carbon whilst being superior to basal plane pyrolytic graphite and boron‐doped diamond. In the case of iodide oxidation, edge plane and basal plane pyrolytic graphite and glassy carbon display similar electrode kinetics but are all superior to boron‐doped diamond. The analytical possibilities were examined using the edge plane pyrolytic graphite electrode for both iodide and bromine where is was found that, based on cyclic voltammetry, detection limits in the order of 10^?6 M are possible.     

Direct Electrooxidation of Ascorbic Acid at the Nanocrystaline Graphite‐like Pyrolytic Carbon Film Electrode

Pyrolytic carbon films (PCFs) were prepared by chemical vapor deposition (CVD) at different deposition temperatures. As an example of using PCF electrode in electroanalysis, the direct electrooxidation of ascorbic acid (AA) at the PCF electrode was investigated and compared with common carbon‐based electrodes such as glassy carbon (GC), edge plane pyrolytic graphite (EPPG), and basal plane pyrolytic graphite (BPPG) electrodes. It was found that the PCF electrodes prepared under deposition temperatures higher than 1050 °C showed a higher sensitivity and lower overpotential compared to the other carbon electrodes. The electrode was successfully applied for determination of AA in real samples.     

Gold Nanoparticle Modified Electrodes Show a Reduced Interference by Cu(II) in the Detection of As(III) Using Anodic Stripping Voltammetry

Interference by Cu(II) causes serious problems in the detection of As(III) using anodic stripping voltammetry at gold electrodes. The behavior of Cu(II) and As(III) were examined at both a gold macro electrode and two kinds of gold nanoparticle modified electrodes, one where gold particles are deposited on glassy carbon (GC) and the other where basal plane pyrolytic graphite (BPPG) is the substrate. The sensitivity of As(III) detection was higher on gold nanoparticle modified electrodes than those on a macro gold electrode by up to an order of magnitude. In addition, the stripping peak of As(III) was narrower and more symmetric on a gold nanoparticle‐modified GC electrode, leading to analytical data with a lower limit of detection. At a macro gold electrode, the peak currents of Cu(II) were higher than those on gold nanoparticle modified electrodes. Accordingly, through the use of gold nanoparticle modified electrodes, the effect of copper interference to the arsenic detection can be reduced.     

The electrochemical performance of graphene modified electrodes: an analytical perspective

We explore the use of graphene modified electrodes towards the electroanalytical sensing of various analytes, namely dopamine hydrochloride, uric acid, acetaminophen and p-benzoquinone via cyclic voltammetry. In line with literature methodologies and to investigate the full-implications of employing graphene in this electrochemical context, we modify electrode substrates that exhibit either fast or slow electron transfer kinetics (edge- or basal- plane pyrolytic graphite electrodes respectively) with well characterised commercially available graphene that has not been chemically treated, is free from surfactants and as a result of its fabrication has an extremely low oxygen content, allowing the true electroanalytical applicability of graphene to be properly de-convoluted and determined. In comparison to the unmodified underlying electrode substrates (constructed from graphite), we find that graphene exhibits a reduced analytical performance in terms of sensitivity, linearity and observed detection limits towards each of the various analytes studied within. Owing to graphene's structural composition, low proportion of edge plane sites and consequent slow heterogeneous electron transfer rates, there appears to be no advantages, for the analytes studied here, of employing graphene in this electroanalytical context.     

Selective stripping voltammetric determinations employing cells for electrolysis with simultaneous ion-exchange or solvent extraction

Cells have been designed for stripping-voltammetry analyses employing graphite working electrodes and mercury film electrodes on a graphite support, permitting ion-exchange or solvent extraction separation simultaneously with the pre-electrolysis. The ion-exchange separation was tested on the determination of mercury in the presence of excess of copper(II), lead and cadmium and on the determination of bismuth in the presence of excess of copper(II). The solvent extraction separation was tested on the determination of mercury(II) in the presence of copper(II), lead and cadmium and the determination of copper(II) in the presence of bismuth. Very good results were obtained by using ion-exchange, where the sensitivity and precision of the determination are comparable with those obtained in the determinations without separation, the separation efficiency being very high, limited virtually only by the capacity of the ion-exchanger used. The solvent extraction separations yielded poorer results: the sensitivity of the determination is decreased substantially, the separation efficiency is not very high and difficulties arise from the adsorption of the organic phase on the electrode surface.     

Electrocatalytic detection of thiols using an edge plane pyrolytic graphite electrode

The first example of using an edge plane pyrolytic graphite electrode in electroanalysis is reported as the determination of homocysteine, N-acetylcysteine, cysteine and glutathione is studied. The response of the electrode in the direct oxidation of thiol moieties is explored and found to be electrocatalytic producing a reduction in the overpotential while having enhanced signal-to-noise characteristics compared to glassy carbon and basal plane pyrolytic graphite electrodes. The effectiveness of the methodology is examined in the determination of cysteine species in a growth tissue media that contains a high number of common biological interferences. The advantageous properties of this electrode for thiol determination lie in its excellent catalytic activity, sensitivity and simplicity.     

Exploration of gas sensing possibilities with edge plane pyrolytic graphite electrodes: nitrogen dioxide detection

The voltammetric response of nitrogen dioxide in aqueous sulfuric acid using an edge plane pyrolytic graphite electrode has been explored and contrasted with that from basal plane pyrolytic graphite, glassy carbon or boron-doped diamond electrodes. Edge plane graphite electrode is found to produce an excellent voltammetric signal in comparison with other carbon-based electrodes exhibiting a well-defined analytically useful voltammetric redox couple in 2.5 M sulfuric acid which is absent on the alternative electrodes.     

Determination of trace amounts of lead and cadmium using a bismuth/glassy carbon composite electrode

We examined the use of a bismuth-glassy carbon (Bi/C) composite electrode for the determination of trace amounts of lead and cadmium. Incorporated bismuth powder in the composite electrode was electrochemically dissolved in 0.1 M acetate buffer (pH 4.5) where nanosized bismuth particles were deposited on the glassy carbon at the reduction potential. The anodic stripping voltammetry on the Bi/C composite electrode exhibited well-defined, sharp and undistorted peaks with a favorable resolution for lead and cadmium. Comparing a non-oxidized Bi/C composite electrode with an in-situ plated bismuth film electrode, the Bi/C composite electrode exhibited superior performance due to its much larger surface area. The limit of detection was 0.41 μg/L for lead and 0.49 μg/L for cadmium. Based on this study, we are able to conclude that various types of composite electrodes for electroanalytical applications can be developed with a prudent combination of electrode materials.     

Electrochemical Response of Cobalt(II) in the Presence of Ammonia

The electrochemical oxidation of cobalt(II) at gold, boron‐doped diamond, basal and edge plane pyrolytic graphite, and highly oriented pyrolytic graphite electrodes in aqueous solutions containing NH₃ has been studied using cyclic voltammetry, with subsequent chemical and electrochemical processes explained in detail. Furthermore, the electro‐reduction of [Co(NH₃)₆]³⁺ in the presence of different electrolytes has also been studied to obtain a better understanding of the oxidation pathway of the Co(II)‐ammine complexes. In aqueous solution the mechanism can be described by the following scheme:     

Electrochemical sensor for trace determination of cadmium(II) from aqueous solutions: use of hybrid materials precursors to natural clays

A sensitive and efficient electroanalytical method for trace determination of cadmium(II) was developed using hybrid material-modified carbon paste electrodes. The hybrid materials were obtained by modifying the commercial bentonite (BC) and locally collected clay (LC) using the hexadecyltrimethylammonium bromide (HDTMA) as to obtain the organo-modified clay samples (BH and LCH). Moreover, the local clay was pillared with aluminium and modified with the HDTMA (LCAH). The carbon paste electrode was modified with the BC/BCH/LC/LCH/LCAH hybrid materials. Cyclic voltammetric analytical data showed that the modified electrodes were possessed a characteristic reversible behaviour of Cd(II) in aqueous media. Moreover, a significant increase in cathodic or anodic current was obtained using the modified electrodes, BCH, LCH and LCAH. The electroactive surface area of modified electrodes was increased significantly compared to the pristine clay-modified carbon paste electrodes. The response of the modified electrode was not affected significantly varying the pH within the pH region 2.0–10.0. Fairly, a good linearity between the anodic current and concentration of Cd(II) (5.0–40 μg/L) was achieved using the modified electrodes (BCH, LCH and LCAH). The presence of different cations and anions as coexisting ions were studied in order to simulate the real water matrix measurements. Additionally, the real matrix analysis was simulated using the Cd(II) spiked tap water, which showed a good linearity between the concentration of Cd(II) and anodic current.     

Stripping Voltammetry with Bismuth Modified Graphite‐Epoxy Composite Electrodes

The attractive performance of graphite‐epoxy composite electrodes (GECE) surface‐modified with a bismuth film (Bi‐GECE) for simultaneous and separate stripping determination of trace amounts of heavy metals (lead, cadmium and zinc) is described. Several key parameters have been optimized. Bi‐GECEi electrode shows superior accumulation properties when compared to bare GECE or even to Hg‐GECE. Bi‐GECE exhibits well‐defined, undistorted, reproducible and sharp stripping signals with RSD of 2.99%, 1.56% and 2.19% for lead, cadmium and zinc respectively. Detection limits of 23.1, 2.2 and 600 μg/L for lead, cadmium and zinc were obtained. Sharp peaks with high resolution (of neighboring signals) that permit convenient multi‐elemental measurements resulted. The applicability of the electrodes to the real samples (tap water and soil sample) was also tested and promising results with good recoveries were obtained.     

A Comparison of Electron Transfer Kinetics of Three Common Carbon Electrode Surfaces in Acetonitrile and in Room Temperature Ionic Liquid 1‐Butyl‐3‐Methylimidiazonium Hexafluorophosphate: Correlation to Surface Structure and the Limit of the Diffusion Domain Approximation

We report the comparison of electron transfer kinetic parameters of the ferrocene redox couple in both acetonitrile and in room temperature ionic liquid (RTIL) 1‐butyl‐3‐methylimidiazonium hexafluorophosphate ([C₄mim] [PF₆]), using edge plane pyrolytic graphite (EPPG), basal plane pyrolytic graphite (BPPG) and glassy carbon (GC) electrodes. Each electrode surface was characterized using SEM and AFM and the surface morphology was analyzed in terms of surface heterogeneity including the distribution of edge plane defects. The experimental data were modeled using both one and two dimensional simulations to correlate the electron transfer parameters obtained with the different surface structure of each electrode. Furthermore, we show that the diffusion domain approximation (commonly used to accurately simulate electron transfer kinetics at graphitic surfaces) breaks down when a BPPG electrode is used in RTIL and demonstrate the near impossibility of assigning rate constant to the basal plane surface.     

Heterogeneous Electron Transfer and Oxygen Reduction Reaction at Nanostructured Iron(II) Phthalocyanine and Its MWCNTs Nanocomposites

Electron transfer and oxygen reduction dynamics at nanostructured iron(II) phthalocyanine/multi‐walled carbon nanotubes composite supported on an edge plane pyrolytic graphite electrode (EPPGE‐MWCNT‐nanoFePc) platform have been reported. All the electrodes showed the category 3 diffusional behaviour according to the Davies–Compton theoretical framework. Both MWCNTs and MWCNT‐nanoFePc showed huge current responses compared to the other electrodes, suggesting the redox processes of trapped redox species within the porous layers of MWCNTs. Electron transfer process is much easier at the EPPGE‐MWCNT and EPPGE‐MWCNT‐nanoFePc compared to the other electrodes. The best response for oxygen reduction reaction was at the EPPGE‐MWCNT‐nanoFePc, yielding a 4‐electron process.     

Electrocatalytic reduction of oxygen at electrodes coated with a bimetallic cobalt(II)/platinum(II) porphyrin

Edge plane pyrolytic graphite (EPG) electrodes coated with 5-(4-pyridyl)-10,15,20-tris(3-methoxy-4-hydroxyphenyl)porphyrin and its Pt(II) and Co(II)/Pt(II) analogs undergo an electrochemical-chemical-electrochemical (ECE) reaction when anodically scanned in 1.0 M HClO4. The new redox couple formed from this anodic conditioning of the coated electrode is dependent on the pH of the solution. Roughened EPG electrodes coated with the Co(II)/Pt(II) bimetallic porphyrin show a catalytic shift of 500 mV for the reduction of O2 when compared to the reduction of O2 at a bare EPG electrode. An additional catalytic shift of ca. 100 mV is observed for O2 reduction at an EPG electrode coated with the Co(II)/Pt(II) porphyrin which has been oxidized in 1.0 M HClO4. In addition to the added electrocatalysis a significant percentage of O2 reduced at the oxidized Co(II)/Pt(II) EPG electrode is converted to H2O as determined by rotating disk electrode measurements.