Methanol Oxidation at Platinum in Alkaline Media: A Study of the Effects of Hydroxide Concentration and of Mass Transport

The hydroxide ion concentration dependence of the methanol oxidation reaction at Pt was studied using microelectrode voltammetry and rotating disk electrode voltammetry. Both methods suggest that the rate of methanol oxidation is limited by hydroxide mass transport at low hydroxide concentrations, while it is inhibited by hydroxide adsorption at high concentrations. It was possible to shift from the transport-limited regime to the inhibitory regime by varying the bulk concentration of hydroxide or by varying mass transport to the electrode. Rotating ring-disk electrode voltammetry was employed to qualitatively assess changes in the diffusion layer pH. The results indicated a decrease in the surface pH during methanol oxidation, as expected, but also that the pH reached a steady state during hydroxide transport limited methanol oxidation.     

Synthesis of 2-hydroxyethylsulfonyl-methyl-substituted polystyrenes and their application in solid phase peptide synthesis

2-Hydroxyethylsulfonylmethyl-substituted polystyrenes are obtained from Merrifield's chloromethylated, cross-linked copolymer, by treatment with sodium 2-hydroxyethylmercaptide in liquid ammonia, followed by oxidation with m-chloroperbenzoic acid. Boc-amino acids can be esterified with the polymer, using dicyclohexylcarbodiimide in dichloromethane. Further condensations are possible via conventional procedures. Protected peptide derivatives, thus prepared, can be detached from the resin by brief treatment with a base. A high elimination rate was observed when the cleavage was performed with a 0.1 M solution of sodium hydroxide containing methanol and a limited amount of water. In the absence of methanol only trace amounts of the product were liberated.     

Investigation of Electrochemical Oxidation of Methanol at a Carbon Paste Electrode Modified with Ni(II)‐BS Complex and Reduced Graphene Oxide Nano Sheets

In the present research, the electro oxidation of methanol was investigated by different electrochemical methods at a carbon paste electrode (CPE) modified with bis(salicylaldehyde)‐nickel(II)‐dihydrate complex (Ni(II)‐BS) and reduced graphene oxide (RGO) (which named Ni(II)‐BS/RGO/CPE) in an alkaline solution. This modified electrode showed very efficient activity for oxidation of methanol. It was found that methanol was oxidized by NiOOH groups generated by further electrochemical oxidation of nickel (II) hydroxide on the surface of the modified electrode. The rate constant and electron transfer coefficient were calculated to be 2.18 s^?1 and 0.4, respectively. The anodic peak currents revealed a linear dependency with the square root of scan rate. This behaviour is the characteristic of a diffusion controlled process, so the diffusion coefficient of methanol was found to be 1.16×10^?5 cm² s^?1 and the number of transferred electron was calculated to be 1. Moreover, differential pulse voltammetry (DPV) investigations showed that the peak current values were proportional to the concentration of methanol in two linear ranges. The obtained linear ranges were from 0.5 to 100.0 µM (R²=0.991) and 400.0 to 1300.0 µM (R²=0.992), and the detection limit was found to be 0.19 µM for methanol determination. Generally, the Ni(II)‐BS/RGO/CPE sensor was used for determination of methanol in an industrial ethanol solution containing 4.0 % methanol.     

Oscillatory electrocatalytic oxidation of methanol on an Ni(OH)2 film electrode

A film of Ni(OH)₂ deposited cathodically on a roughened nickel substrate consists of even nanoparticles, which were characterized by atomic-force microscopy (AFM). The mechanism of potential oscillations in the electrocatalytic oxidation of methanol on this film electrode in alkaline medium was studied in situ by means of Raman spectroscopy in combination with electrochemical measurements. The redox change of the nickel hydroxide film, the concentration distribution of methanol in the diffusion layer, and the oxidation products of methanol were characterized in situ by time-resolved, spatial-resolved, and potential-dependent Raman spectroscopy, respectively. Electrochemical reactions, i.e. methanol oxidation and periodic oxygen evolution, coupling with alternately predominant diffusion and convection mass transfer of methanol, account for the potential oscillations that occur during oxidation of methanol above its limiting diffusion current. This mechanism is totally different from that of methanol oxidation on platinum electrodes, for which surface steps, i.e. formation and removal of CO_ad, are essential.This work is dedicated to Professor Gyorgy Horanyi on the occasion of his 70th birthday in recognition of his numerous contributions to field of electrochemical oscillations and electrocatalysis at Ni-hydroxide electrodes.     

Gas-phase dehydrogenation of methanol with mononuclear vanadium-oxide cations

The reactions of methanol with mass-selected V+, VOH+, VO+, and VO2(+) cations are studied by Fourier-transform ion-cyclotron resonance (FT-ICR) mass spectrometry in order to investigate the influence of the formal oxidation state of the metal on the reactivity of vanadium-oxide compounds. Interestingly, the most reactive species is the low-valent hydroxide cation VOH+, for which a formal condensation reaction prevails to afford VOCH3(+). In contrast, atomic V+ is oxidized and the high-valent dioxide cation VO2(+) is reduced by methanol. The dehydrogenation of methanol mediated by VO+ does not involve any change of the metal's oxidation state. For the latter reaction, the experimental results are complemented by a theoretical investigation by using density functional theory.     

Investigation of Methanol Behavior at the Designed Electrochemical Sensor based on Ni(II) Complex and Graphene Nanosheets

In this work, the electrochemical oxidation of methanol was investigated by different electrochemical methods at a carbon paste electrode (CPE) modified with (N‐5‐methoxysalicylaldehyde, N´‐2‐hydroxyacetophenon‐1, 2 phenylenediimino nickel(II) complex (Ni(II)–MHP) and reduced graphene oxide (RGO), which is named Ni(II)‐MHP/RGO/CPE, in an alkaline solution. This modified electrode was found to be efficient for the oxidation of methanol. It was found that methanol was oxidized by the NiOOH groups generated by further electrochemical oxidation of nickel(II) hydroxide on the surface of the modified electrode. Under optimum conditions, some parameters of the analyte (MeOH), such as the electron transfer coefficient (α), the electron transfer rate constant) k_s), and the diffusion coefficient of species in a 0.1 M solution (pH = 13), were determined. The designed sensor showed a linear dynamic range of 2.0–100.0 and 100.0–1000.0 μM and a detection limit of 0.68 μM for MeOH determination. The Ni(II)‐MHP/RGO/CPE sensor was used in the determination of MeOH in a real sample.     

Electrochemical Synthesis of 2,3-Dimethyl-2,3-Dinitrobutane

Anodic oxidation of 2-nitropropane in a methanol solution of sodium iodide and hydroxide is found to produce 2,3-dimethyl-2,3-dinitrobutane with a yield of 65-70% under optimum conditions. Deceased.     

稀土对甲醇车尾气净化银催化剂性能影响的研究

甲醇作为燃料汽油的代用品已引起人们的重视 ,但甲醇车尾气中含有多种含氧化合物 ,通常的三效净化催化剂已不能满足其净化要求 .已知甲醇车在怠速时排气温度仅为 80℃ (二冲程 )或 1 2 0℃ (四冲程 ) ,该温度下甲醇在催化剂作用下通常易生成醛、酯等含氧中间产物 ,因而此时排污最为严重[1] .目前提出的甲醇燃料车尾气净化催化剂的低温起燃活性及深度氧化选择性均未达到使用要求 ,如 Pd,Pt具有良好的甲醇低温转化活性 ,但深度氧化活性差 ;Ag催化剂具有良好的甲醇低温深度氧化选择性 ,但低温转化活性差 [2～ 7] .将稀土元素 La和 Ce应用于汽…     

A facile method for the N-formylation of primary and secondary amines by liquid phase oxidation of methanol in the presence of hydrogen peroxide over basic copper hydroxyl salts

N-formylation reactions by catalytic oxidation of methanol in the presence of primary or secondary amines and hydrogen peroxide has been investigated using a liquid phase reaction system over basic copper hydroxyl salts. A series of basic copper hydroxyl salts was prepared by the conventional precipitation method using aqueous ammonia and sodium hydroxide as precipitating agents. PXRD, SEM, FT-IR, BET were employed for physical characterization of the prepared basic copper hydroxyl salts. The composition of the catalytic material obtained was found dependent on the nature of the anion associated with the copper salt precursor. The copper hydroxyl chloride catalyst has shown the best catalytic performance in terms of the reaction rate and product selectivity whereas for the copper oxide catalyst the reaction rate was extremely slow. It is interesting to observe that 4-piperidone protected with acid-sensitive functional groups such as N-acetyl piperazine and ethylene glycol can also be formylated from moderate to good yields by these catalysts.     

Methanol electrooxidation in alkaline solutions on platinum-based electrodes: Classical and dynamical approach

The electrochemical oxidation of methanol has been carefully studied due to its application in fuel cells. In this work electrooxidation of methanol was investigated on bare platinum electrode, the platinum electrode covered with Nafion and platinum supported on zeolite 13X. Along with classical electrochemical methods, attractor reconstruction was used to make rough distinction among possible reaction mechanisms on different forms of Pt. The obtained transient voltammogram records were used to calculate apparent rate constants for methanol oxidation limiting steps in transient period. All samples contributed to methanol oxidation by basically same reaction mechanism, but with significantly different apparent rate constants.     

Kinetics and mechanism of oxidation of leucine by chloramine-T in alkaline media

Alkaline media oxidation of leucine by chloramine-T has been investigated. A first order dependence in chloramine-T and leucine and a near inverse first order dependence in hydroxide ion has been observed. Ionic strength had negligible effect while the effect of methanol addition was slightly negative. The oxidation process has been shown to proceed via two paths, one involving p-toluenesulfochloramide as the main oxidising species and the other involving hypochlorite ion, each interacting in a slow step with a leucine molecule leading to formation of monochloroleucine acid, which subsequently interacts with another molecule of p-toluenesulfochloramide or hypochlorite ion resp., yielding products.     

四磺酸基酞菁钴对于光滑Pt电极上氧还原过程的影响

将大环化合物四磺酸基酞菁钴(CoTSPc)加入到电解液中, 研究了其对Pt阴极催化氧还原以及耐甲醇性能的影响. 实验结果发现, 这种影响与加入到溶液中的CoTSPc的浓度有关, 当溶液中加入CoTSPc的浓度为0.09 mmol•L^－1时, Pt电极催化氧还原的电流基本不变, 而有效抑制了甲醇在阴极的氧化, 使甲醇氧化的峰电流值下降79.7%.     

Chiral ion-pair chromatography on porous graphitized carbon using N-blocked dipeptides as counter ions

Two newly synthesized chiral di-anionic counter ions were tested for enantiomeric resolution of a set of amino alcohols on porous graphitized carbon, Hypercarb. Z-L-Aspartyl-L-proline dissolved in methanol baseline resolved nine of 12 tested racemates. One of its diastereoisomers, Z-L-aspartyl-D-proline was also tested but resulted in low separation factors, <1.1. Sodium hydroxide was added to the mobile phase in order to titrate the counter ion to its mono- or di-anionic form. Results show that the di-anionic form was found to be superior to the mono-anionic form regarding enantioselectivity. Increased content of the counter ion in the mobile phase, with constant ratio between counter ion and sodium hydroxide concentration, decreased retention but only slightly affected enantioselectivity. Increased retention and enantioselectivity were observed with decreased column temperature. Resolution factors >3 were obtained between the enantiomers in atenolol and metoprolol with a total retention time of less than 15 min. Further, all four stereoisomers of an analogue to metoprolol were separated using Hypercarb and a mobile phase of 5 mM Z-L-aspartyl-L-proline and 9 mM sodium hydroxide in methanol.     

Use of hypervalent iodine oxidation for the C(3)-hydroxylation of chromone,flavone and α-naphthoflavone

C(3)-Hydroxylation of chromone (1a) , flavone (1b) and α-naphthoflavone (4) via acid-catalysed hydrolysis of the corresponding β-methoxy-α-hydroxydimethylacetals (2a, 2b , and 5) formed by iodobenzene diacetate-potassium hydroxide methanol oxidation is described.     

Oxydative Umwandlung von 17-Alkoxy-aspidospermidin-Derivaten in 17, 17-Dialkoxy-17, 18-dihydro-1, 18-dehydro-aspidospermidine

Treatment of 17-alkoxy-aspidospermidine derivatives with iodine and sodium hydroxide in methanolic or ethanolic solution yields the corresponding 17, 17-dialkoxy-17, 18-dihydro-1, 18-dehydro-aspidospermidine. Hence compounds 1 and 2 in methanol give the oxidation products 8 and 3 , respectively. In ethanol, 4 is converted to 5 , 2 to a mixture of 6 and 7 ; 4 in methanol yields a mixture of 6 and 7 in a different ratio.     

Methanol dehydrogenation and oxidation on Pt(111) in alkaline solutions

Adsorption, dehydrogenation, and oxidation of methanol on Pt(111) in alkaline solutions has been examined from a fundamental mechanistic perspective, focusing on the role of adsorbate-adsorbate interactions and the effect of defects on reactivity. CO has been confirmed as the main poisoning species, affecting the rate of methanol dehydrogenation primarily through repulsive interactions with methanol dehydrogenation intermediates. At direct methanol fuel cell (DMFC)-relevant potentials, methanol oxidation occurs almost entirely through a CO intermediate, and the rate of CO oxidation is the main limiting factor in methanol oxidation. Small Pt island defects greatly enhance CO oxidation, though they are effective only when the CO coverage is 0.20 ML or higher. Large Pt islands enhance CO oxidation as well, but unlike small Pt islands, they also promote methanol dehydrogenation. Perturbations in electronic structure are responsible for the CO oxidation effect of defects, but the role of large Pt islands in promoting methanol dehydrogenation is primarily explained by surface geometric structure.     

Influence of activated carbon modifications on their catalytic activity in methanol and ethanol conversion reactions

Activated carbons containing different surface functionalities have been investigated as catalysts in conversion reactions of ethanol and methanol. These carbon materials were prepared from Polish brown coal by chemical activation with potassium hydroxide and modified by the oxidation or reaction with ammonia or chlorine. The main process upon ethanol decomposition was its dehydrogenation, while in the process of methanol decomposition only a few samples were catalytically active, and the only product was dimethyl ether (a product of dehydration).      

Kinetics and mechanisms of the catalytic reactions of formaldehyde with copper oxides and a copper ion complex in aqueous alkali

The kinetics of the autocatalytic reactions of formaldehyde with copper(II) and copper(I) oxides and with the Cu²⁺ ion of the copper EDTA complex, as well as formaldehyde disproportionation in the presence of copper metal, have been investigated in aqueous solutions of sodium hydroxide. Two likely reaction mechanisms are presented. The difference between these mechanisms does not alter the observed kinetics of the processes, whose rate is determined by their first, slow step, namely, the oxidation of the methylene glycol anion adsorbed on the copper surface into formic acid. In the slow step of the first mechanism, a hydride ion is abstracted from the methylene glycol anion and is transferred to copper. In the slow step of the second mechanism, the methylene glycol anion undergoes anodic oxidation, releasing a hydrogen atom and an electron. In the rapid steps of the first mechanism, the hydride ion undergoes anodic oxidation to hydrogen, the copper compound undergoes cathodic reduction to copper metal, and, simultaneously, the electron and hydrogen are transferred to a nonionized formaldehyde molecule to yield methanol. Mathematical models are suggested for the reactions. The effective rate constants and activation energies of the slow steps of the reactions have been determined. The effective rate constants of the noncatalytic reduction reactions of the copper compounds and the ratios of the rates of the rapid hydrogen and methanol formation reactions have been estimated.     

以方沸石负载Ni(II)催化剂修饰的电极电氧化甲醇Seyed Naser Azizi,Shahram Ghasemi,Neda Salek Gilani简

There is a high overvoltage in the oxidation of methanol in fuel cells, and so modified electrodes are used to decrease it. A modified electrode that used Ni(Ⅱ) loaded analcime zeolite to catalyze the electrooxidation of methanol in alkaline solution was proposed. Analcime zeolite was synthesized by hydrothermal synthesis, and Ni(Ⅱ) ions were incorporated into the analcime structure, which was then mixed with carbon paste to prepare modified electrode. The electrocatalytic oxidation of methanol on the surface of the modified electrode in alkaline solution was investigated by cyclic voltammetry and chronoamperometry. The effects of the scan rate of the potential, concentration of methanol, and amount of zeolite were investigated. The rate constant for the catalytic reaction of methanol was 6×10³ cm³ mol^-1 s^-1 from measurements using chronoamperometry. The proposed electrode significantly improved the electron transfer rate and decreased the overpotential for methanol oxidation.     

In-situ X-ray absorption spectroscopy study of Pt and Ru chemistry during methanol electrooxidation

Methanol electrooxidation in a 0.5 M sulfuric acid electrolyte containing 1.0 M CH3OH was studied on 30% Pt/carbon and 30% PtRu/carbon (Pt/Ru = 1:1) catalysts using X-ray absorption spectroscopy (XAS). Absorption by Pt and Ru was measured at constant photon energy in the near edge region during linear potential sweeps of 10-50 mV/s between 0.01 and 1.36 V vs rhe. The absorption results were used to follow Pt and Ru oxidation and reduction under transient conditions as well as to monitor Ru dissolution. Both catalysts exhibited higher activity for methanol oxidation at high potential following multiple potential cycles. Correlation of XAS data with the potential sweeps indicates that Pt catalysts lose activity at high potentials due to Pt oxidation. The addition of Ru to Pt accelerates the rate of methanol oxidation at all potentials. Ru is more readily oxidized than Pt, but unlike Pt, its oxidation does not result in a decrease in catalytic activity. PtRu/carbon catalysts underwent significant changes during potential cycling due to Ru loss. Similar current density vs potential results were obtained using the same PtRu/carbon catalyst at the same loading in a membrane electrode assembly half cell with only a Nafion (DuPont) solid electrolyte. The results are interpreted in terms of a bifunctional catalyst mechanism in which Pt surface sites serve to chemisorb and dissociate methanol to protons and carbon monoxide, while Ru surface sites activate water and accelerate the oxidation of the chemisorbed CO intermediate. PtRu/carbon catalysts maintain their activity at very high potentials, which is attributed to the ability of the added Ru to keep Pt present in a reduced state, a necessary requirement for methanol chemisorption and dissociation.