Living polymerization of propylene and 1-hexene using bis-Cp type metallocene catalysts

To check the possibility of living polymerization with a biscyclopentadienyl metallocene, propylene polymerization was conducted by Cp₂ZrMe₂ at –78°C or Cp₂HfMe₂ at –50°C using B(C₆F₅)₃ and AlOct₃ as a cocatalyst. The polymer yield increased linearly with polymerization time. The polypropylene obtained showed narrow molecular weight distribution (M_w/M_n 1.04–1.15). In addition, the number-average molecular weight increased in proportion to the polymerization time. It was, thus, found that living polymerization of propylene proceeds with the catalyst systems at a very low temperature. Isospecific living polymerization of 1-hexene also proceeded with the rac-(et)Ind₂ZrMe₂ catalyst at –78°C.     

吡啶亚胺(胺)钒烯烃聚合催化剂

设计合成了一系列以吡啶二亚胺、吡啶胺-亚胺和吡啶二胺为螯合配体的三价钒配合物2a2e, 并通过红外和元素分析等技术手段对其进行了结构表征。 在助催化剂和再生活化剂的存在下, 这些催化剂展示出了高活性和良好的高温稳定性。 得到高相对分子质量、单峰分布聚乙烯表明聚合体系为单活性中心。 以吡啶二胺为螯合配体的配合物2e(2, 6-bis[2, 6-(ⁱPr)₂PhNC(Me)]₂(C₅H₃N)VCl)在50 ℃下显示出的活性高达6.96 kg PE/mmol_V·h, 且在70 ℃时仍保持高的催化活性, 这表明双阴离子吡啶二胺能更好的保护催化活性中心。 此外, 这类三价钒催化剂能高活性催化乙烯-降冰片烯及乙烯-己烯共聚, 在温和条件下即可得到较高单体插入率(降冰片烯37.3%, 己烯4.8%)的共聚物。     

Olefin polymerization by (cyclopentadienyl)(ketimide)titanium(IV) complexes of the type, Cp′TiCl2(N=CBu2)-methylaluminoxane (MAO) catalyst systems

Effects of substituents on cyclopentadienyl group for homopolymerization of ethylene, 1-hexene, and for ethylene/1-hexene copolymerization using a series of nonbridged (cyclopentadienyl)(ketimide)titanium complexes of the type, Cp′TiCl₂(N=C^tBu₂) [Cp′ = Cp (1), ^tBuC₅H₄ (2), C₅Me₅ (Cp^*, 3), and indenyl (4)] have been explored in the presence of methylaluminoxane (MAO) cocatalyst. Complexes 1–3 showed the similar catalytic activities for ethylene polymerization although the activity by 4 was somewhat low, whereas the activity for 1-hexene polymerization increased in the order 1 > 4 2 > 3. These complexes showed significant activities for ethylene/1-hexene copolymerization affording high molecular weight poly(ethylene-co-1-hexene)s with unimodal molecular weight distributions, and the activity increased in the order: 4 > 1 2, 3. The r_Er_H values in the polymerization by 1–3 at 40 °C were 0.35–0.52 which clearly indicate that the 1-hexene incorporation in the copolymerization did not proceed in a random manner. The r_E values by 1–3 were 6.0–6.4 and the values were independent upon the cyclopentadienyl fragment employed; the r_E values by 4 at 40 °C were 10.2–10.9 which were close to those by ansa-metallocene complex catalysts. These values were influenced by the polymerization temperature, and the 1-hexene incorporation by 1–4 became inefficient at higher temperature, although the observed activities especially by 1, 4 were highly remarkable.     

Synthesis of Reactive-Ended Acrylic Polymers by Group Transfer Polymerization: Initiation with Silyl Ketene Acetals

Living methacrylate polymers are obtained at room temperature and above by initiation with ketene silyl acetals in the presence of a soluble bifluoride catalyst. During the polymerization, a trialkylsilyl group is transferred from the living chain end to incoming monomer. The new procedure has thus been named group transfer polymerization (GTP). Monodisperse polymers with predetermined molecular weights as high as 100,000 can be obtained by adjusting the monomer/initiator ratio. Telechelic poly(methyl methacrylate) with hydroxy or carboxy ends can be obtained by using an initiator containing a protected hydroxy or carboxy group and coupling the resulting living polymer.     

DEPENDENCE OF THE DISTRIBUTION OF ACTIVE CENTERS ON MONOMER IN SUPPORTED ZIEGLER-NATTA CATALYSTS

Distribution of active centers(ACD)of ethylene or 1-hexene homopolymerization and ethylene-1-hexene copolymerization with a MgCl_2/TiCl_4 type Z-N catalyst were studied by deconvolution of the polymer molecular weight distribution into multiple Flory components.Each Flory component is thought to be formed by a certain type of active center. ACD of ethylene-1-hexene copolymer with very low 1-hexene incorporation was compared with that of ethylene homopolymer to see the effect of introducingα-olefin on eth...     

新型均相铬系催化剂的制备与催化乙烯齐聚

合成了3种新型的N取代基中含有O/N杂原子的1,3,5-三氮杂环己烷[NNN]型配体,利用氢核磁共振谱(1H NMR)、碳核磁共振谱(13C NMR)及电子轰击质谱(EI-MS)等方法对其进行表征.将[NNN]型配体与Cr(Ⅲ)络合制备相应的均相铬催化剂,采用电喷雾质谱(ESI-MS)及元素分析分别对其进行表征.以甲基烷氧铝(MAO)为助催化剂,考察了反应温度、反应压力及铝铬摩尔比等因素对催化乙烯齐聚催化性能的影响.研究结果表明,在以甲苯为溶剂,反应温度50℃,反应压力0.8 MPa,铝铬摩尔比为500∶1,Cr浓度为2.0×10-4mol/L的反应条件下,取代基为3-二甲氨基丙基的均相铬催化剂的催化活性能够达到15.71×105g/(mol Cr·h),对1-己烯和1-辛烯的选择性达到91.02%,而取代基为3-乙氧基丙基的均相铬催化剂的催化活性比较低,为11.54×105g/(mol Cr·h),但对1-己烯和1-辛烯的选择性较高,达到93.05%.     

THERMOSENSITIVITY OF NARROW-DISPERSED POLY(N-n-PROPYLACRYLAMIDE) PREPARED BY ATOM TRANSFER RADICAL POLYMERIZATION

Controlled polymerization of N-n-propylacrylamide was achieved by atom transfer radical polymerization(ATRP) in a N,N-dimethylformamide-water mixture(50 vol%)at room temperature with methyl 2-chloropropinonate as initiator and CuCl/tris(2-dimethylaminoethyl)amine as the catalytic system in a ratio of 1:1:1.High molecular weight homopolymers(up to 3.7×10~4)with narrow molecular weight distribution(less than 1.2)were obtained.The living character of the polymerization was further demonstrated by self-block...     

单电子转移活性自由基聚合制备支化聚丙烯酸甲酯的研究

以丙烯酸2-(2-溴异丁酰氧基)乙酯(BIEA)为引发剂单体(inimer),丙烯酸甲酯(MA)为单体,Cu0/CuBr2和N,N,N',N″,N″-五甲基二亚乙基三胺(PMDETA)为催化体系,二甲亚砜(DMSO)为溶剂,在常温(25℃)下通过单电子转移活性自由基聚合(SET-LRP)合成支化聚丙烯酸甲酯.聚合反应过程中,采用气相色谱(GC)、核磁共振(1H-NMR)和三检测体积排除色谱(TD-SEC)等测试手段跟踪分析和表征支化聚合物的结构.研究结果表明,采用SET-LRP方法,铜粉作为催化剂,常温下聚合反应就能快速进行,130 min之内MA的转化率已达99%以上,制备出高分子量支化聚合物.随着反应的不断进行,聚合物支化程度不断提高,相比较同分子量下的线型聚合物其黏度不断下降,Mark-Houwink特征常数α最小可达0.290.此外,低分子量聚合物组分随着反应不断减少,在高单体转化率下,聚合体系中以高支化度的聚丙烯酸甲酯为主.     

Copper(0)-mediated radical polymerization of styrene at room temperature

The “living’/controlled radical polymerization (LRP) of styrene (St) at room temperature is rarely reported. In this work, copper(0) (Cu(0))-mediated radical polymerization of St at room temperature was investigated in detail. Dimethyl sulfoxide (DMSO), N,N-dimethylformamide (DMF) as well as a binary solvent, tetrahydrofuran/1,1,1,3,3,3-hexafluoro-2-propanol were used as the solvents, respectively. Methyl-2-bromopropionate and ethyl 2-bromoisobutyrate were used as the initiators, respectively. The polymerization proceeded smoothly with moderate conversions at room temperature. It was found that DMF was a good solvent with the essential features of LRP, while DMSO was a poor solvent with uncontrollable molecular weights. Besides, the match among the initiator, solvent and molar ratios of reactants can modulate the livingness of the polymerization, and the proper selection of ligand was also crucial to a controlled process. This work provided a first example of Cu(0)-mediated radical polymerization of St at room temperature, which would enrich and strength the LRP technique.     

二氧化硅-聚-γ-巯丙基硅氧烷-铂络合物对不饱和化合物的硅氢加成的催化活性和稳定性

<正> 文献指出带有二苯膦、二甲基胺或氰基基团的聚苯乙烯、聚烯丙基氯和聚甲基丙烯酸酯的铂或铑的络合物可用来作为烯烃的非均相硅氢加成催化剂。我们曾经发现二氧化硅-聚-γ-氨丙基硅氧烷-铂络合物(简称为Si-NH_2-Pt)也是一种对烯烃的硅氢加成具有高活性及选择性的催化剂。     

Effect of 1-Hexene Comonomer on Polyethylene Particle Growth and Kinetic Profiles

Summary: The polymer growth and the microstructure of the final polymer are greatly affected by mass transfer, especially in the early stages of polymerization. In the present work, the catalytic system (nBuCp)₂ZrCl₂/MAO immobilized over SiO₂-Al₂O₃ has been tested in ethylene-1-hexene copolymerizations using different amounts of comonomer. The catalytic activity shows a positive comonomer effect up to 1-hexene concentration of 0.724 mol/L since larger amounts of 1-hexene lead to a decrease in the activity. Copolymer properties analyzed by ¹³C NMR, GPC, CRYSTAF and DSC point to the presence of important amorphous regions in the growing polymer chains as the 1-hexene concentration increases. In order to study the incorporation of 1-hexene during ethylene polymerization, several experiments were performed with 0.194 mol/L of 1-hexene, 5 bar of ethylene pressure and different polymerization times. The incorporation of 1-hexene decreases slightly at polymerization times above 20 minutes. From cross-sectioned SEM images it can be concluded that the presence of 1-hexene helps catalyst fragmentation which could be related with the filter effect proposed by Fink.     

碳桥限制构型催化剂催化乙烯1-己烯共聚和共聚物结构表征

为了碳桥限制构型催化剂(CpCN-CGC)的工业应用,为模试提供工艺参数,我们考察了用这种催化剂,以正庚烷为溶剂,甲基铝氧烷(MAO)为助催化剂的乙烯与1-己烯共聚,考察因素包括聚合温度、乙烯压力、铝锆比、氢气压力和1-己烯浓度.研究发现聚合温度从100升高到140℃,共聚活性先升高再降低,聚合物分子量持续降低;氢气分压从0.1增加到0.8 MPa,共聚活性仍呈先升高再降低,聚合物分子量持续降低的趋势;乙烯压力从0.4升高到1.8 MPa,共聚活性先升高再降低,但聚合物分子量逐步增大;Al/Zr从500升高到1 000,共聚活性逐步增大,但聚合物分子量趋向减小.优化工艺条件为:催化剂用量为10μmol,Al/Zr=700,聚合温度为110~120℃,乙烯压力为1.2~1.4 MPa,1-己烯加入量为20 mL,聚合时间为30 min.此时共聚活性最高达到106g/(mol-Zr·h),共聚物中1-己烯插入率达到了8.34%;用13C-NMR、GPC、DSC表征了聚合产物,计算了二单元组和三段组序列分布,并发现有交替共聚片段HEHE存在.最后还讨论了在聚合物中发现的多种支链的形成机理.     

Half-zirconocene anilide complexes: synthesis, characterization and catalytic properties for ethylene polymerization and copolymerization with 1-hexene

A number of half-zirconocene anilide complexes of the type Cp*ZrCl(2)[N(2,6-R(1)(2)C(6)H(3))R(2)] [R(1) = (i)Pr (1, 3), Me (2); R(2) = Me (1, 2), Bn (3)] and Cp*ZrCl[N(2,6-Me(2)C(6)H(3))Me](2) (4) (Cp* = pentamethylcyclopentadienyl) were synthesized from the reactions of Cp*ZrCl(3) with the lithium salts of the corresponding anilide in diethyl ether at room temperature. All new zirconium complexes were characterized by (1)H and (13)C NMR and elemental analysis. Molecular structures of complexes 1, 2 and 4 were determined by single crystal X-ray diffraction analysis. Upon activation with Al(i)Bu(3) and Ph(3)CB(C(6)F(5))(4), complexes 1-4 exhibit good catalytic activity for ethylene polymerization, and produce polyethylene with a moderate molecular weight. Among these zirconium complexes, complex 1 shows the highest catalytic activity while complex 4 shows the lowest catalytic activity for ethylene polymerization. Complexes 1-3 also exhibit moderate catalytic activity for copolymerization of ethylene with 1-hexene, and produce copolymers with relatively high molecular weight and reasonable 1-hexene incorporation. In addition, the activation procedure of these catalyst systems were studied by (1)H NMR spectroscopy.     

γ-射线辐射活性自由基聚合研究

本文对γ- 射线辐射条件下的活性自由基聚合反应研究及进展进行了综述。虽然γ- 射线辐射引发聚合反应通常是不可控的,但在有机硫化物,如二硫代羧酸酯或三硫代碳酸酯存在下,则成功地实现了可控/活性自由基聚合。聚合过程中聚合物分子量随单体转化率线性增长,不但可控,且分布窄,也可以用于合成嵌段共聚物。有机硫化物对聚合反应控制起着关键性作用,硫化物的结构对于γ- 射线辐射活性自由基聚合行为的影响显著。γ- 射线辐射聚合的突出优点是可在室温或更低的温度下实施,且不需要加入引发剂。在环硫化合物存在下,获得了环形聚合物;而且使热和光敏感的叠氮类单体实现了活性聚合。     

Synthesis and structures of (R)-cyclopentadienyl-binaphthoxy titanium(IV) complexes and catalytic properties for olefin polymerization

Two new chiral pre-ligands, (R)-3,3'-bis(tetramethylcyclopentadienyl)-2,2'-bismethoxy-1,1'-bisnaphthalene (1) and (R)-3-tetramethylcyclopentadienyl-2,2'-bismethoxy-1,1'-bisnaphthalene (2), were synthesized by reaction of (R)-3,3'-dilithium-2,2'-bismethoxy-1,1'-bisnaphthalene with 2,3,4,5-tetramethyl-2-cyclopentenone at room temperature. Treatment of the pre-ligands 1 and 2 with butyllithium and Me(3)SiCl first, and subsequently with TiCl(4) (2 and 1 equiv for 1 and 2, respectively) afforded a binuclear complex (R)-3,3'-bis[(tetramethylcyclopentadienyl)trichlorotitanium]-2,2'-bismethoxy-1,1'-bisnaphthalene (3) and a mononuclear complex (R)-3-(tetramethylcyclopentadienyl)trichlorotitanium-2,2'-bismethoxy-1,1'-bisnaphthalene (4) in moderate yields. Complexes 3 and 4 were further converted into constrained geometry complexes (R)-1,1'-bis{2,2'-naphthoxy-3,3'-bis[(tetramethylcyclopentadienyl)dibromotitanium]} (5) and (R)-1-(2-naphthoxy)-1'-(2'-naphthol)-3-(tetramethylcyclopentadienyl)dibromotitanium (6) by treatment with BBr(3). The pre-ligands 1 and 2 were characterized by (1)H and (13)C NMR and high resolution mass spectroscopy (HRMS), and the new titanium complexes 3-6 were characterized by (1)H and (13)C NMR and elemental analyses. Molecular structures of 4, 5, and 6 were determined by single-crystal X-ray diffraction analysis. Complexes 4, 5, and 6 all have a pseudo-octahedral coordination environment and adopt a three-legged piano stool geometry around the titanium atom in their solid state structures. When activated with Al(i)Bu(3) and Ph(3)CB(C(6)F(5))(4), the chiral complexes 5 and 6 show moderate catalytic activities for propylene, 1-hexene, and 5-ethylidene-2-norbornene (ENB) polymerization and ethylene/1-hexene copolymerization. The polymers produced by the chiral 5/(i)Bu(3)Al/Ph(3)CB(C(6)F(5))(4) catalyst system from the 1-hexene, and ENB polymerization and ethylene/1-hexene copolymerization with high comonomer contents exhibit optical activity.     

New polymer structures based on vinyl ether polymerization

Sequential living cationic polymerization of octadecyl vinyl ether (ODVE) and methyl vinyl ether (MVE) was used for the preparation of amphiphilic ABA‐type block copolymers. The polymerization of ODVE was initiated with the trimethyl silyl iodide/1,1,3,3‐tetramethoxy propane/ZnI₂ system at 0°C in toluene. The living bifunctional polyODVE thus obtained was used as initiator for the polymerization of MVE. Below the LCST of polyMVE (37°C), the copolymers are amphiphiles. Above the LCST of polyMVE, the polyMVE‐blocks become hydrophobic and the amphiphilic nature of the block copolymer is lost. This was demonstrated by using the block copolymers as emulsifiers for water/decane mixtures. The emulsions were stable for several hours at room temperature, while the emulsion stability decreased to about 30 seconds at 40°C. PolyMVE‐α,ω‐bis‐methacrylates were obtained by end‐capping of living bifunctional polyMVE with 2‐hydroxyethyl methacrylate (HEMA). Copolymerization of these bis‐macromers with HEMA leads to segmented networks. The networks showed a reversible swelling/deswelling behavior in water as a function of temperature. This is caused by a change of the hydrophilicity of the polyMVE segments in the networks. Hexa(chloromethyl)melamine, combined with zinc chloride was found to be an efficient hexafunctional initiator for the living cationic polymerization of vinyl ethers. This simple initiating system opens new ways for the synthesis of endgroup‐functionalized star‐shaped poly(vinyl ethers).     

Observation of different catalytic activity of various 1-olefins during ethylene/1-olefin copolymerization with homogeneous metallocene catalysts

This research aimed to investigate the copolymerization of ethylene and various 1-olefins. The comonomer lengths were varied from 1-hexene (1-C?) up to 1-octadecene (1-C??) in order to study the effect of comonomer chain length on the activity and properties of the polymer in the metallocene/MAO catalyst system. The results indicated that two distinct cases can be described for the effect of 1-olefin chain length on the activity. Considering the short chain length comonomers, such as 1-hexene, 1-octene and 1-decene, it is obvious that the polymerization activity decreased when the length of comonomer was higher, which is probably due to increased steric hindrance at the catalytic center hindering the insertion of ethylene monomer to the active sites, hence, the polymerization rate decreased. On the contrary, for the longer chain 1-olefins, namely 1-dodecene, 1-tetradecene and 1-octadecene, an increase in the comonomer chain length resulted in better activity due to the opening of the gap aperture between C(p)(centroid)-M-C(p)-(centroid), which forced the coordination site to open more. This effect facilitated the polymerization of the ethylene monomer at the catalytic sites, and thus, the activity increased. The copolymers obtained were further characterized using thermal analysis, X-ray diffraction spectroscopy and 13C-NMR techniques. It could be seen that the melting temperature and comonomer distribution were not affected by the 1-olefin chain length. The polymer crystallinity decreased slightly with increasing comonomer chain length. Moreover, all the synthesized polymers were typical LLDPE having random comonomer distribution.     

Preparation of rhodium–phyllosilicate catalysts without leaching in liquid-phase 1-hexene hydrogenation

Rhodium catalysts have been prepared on palygorskite and montmorillonite (clay) supports by reduction with hydrogen (1 atmosphere) at room temperature of a cationic organometallic rhodium compound anchored to the support. The activity of these catalysts for the hydrogenation of liquid-phase 1-hexene remains constant with increase of prehydrogenation time and with re-use for several runs. No rhodium leaching is observed.     

A coordination polymer of (Ph3P)AuCl prepared by post-synthetic modification and its application in 1-hexene/n-hexane separation

PCM-10 is a porous phosphine coordination material based on Ca(II) and tris(p-carboxylated) triphenylphosphine. The material provides a unique 3-dimensional surface of P(III) Lewis base sites, which is ideal for post-synthetic functionalization. The addition of Au(I) yields an advanced material that can selectively adsorb 1-hexene over n-hexane at room temperature.     

Metalloporphyrin catalysts for living and immortal polymerizations

The living polymerization of methyl methacrylate with aluminium porphyrin ( 1 ) proceeded dramatically rapidly at room temperature in the presence of sterically crowded organoaluminium compounds such as methylaluminium ortho-substituted diphenolates ( 3a − 3g ), bis(triphenylmethanolate) ( 4a ), and triphenylaluminium, where undesired reaction between the growing species and the Lewis acids was sterically suppressed. On the basis of this Lewis acid - assisted high-speed living polymerization, various monomers such as ethyl, propyl, butyl, and dodecyl methacrylates, methacrylonitrile, and 1,2-epoxypropane were polymerized very rapidly with the aluminium porphyrin - Lewis acid systems.