The application of solid sorbents for the purification of aluminum contaminated chemicals used as modifiers in electrothermal atomic absorption spectrometry

Various microcolumns with solid sorbents (ion exchange resins, functionalised cellulose sorbents, chelating resins) have been tested with respect to their ability for the purification of aluminum contaminated chemicals used as modifiers in electrothermal atomic absorption spectrometry. The purification of NaNO(3), Mg(NO(3))(2), K(2)SO(4) and (NH(4))(2)HPO(4) has been the most effective with an almost 100% efficiency, when Spheron-Oxine was used as chelating resin. The sorption of aluminum from KOH solution has been found to be very high (around 90%) for all investigated sorbents. However, the best results have been obtained with anion-exchange resins. It has been difficult to purify concentrated mineral acids (HCl, H(2)SO(4)). A retention of aluminum above 80% has been achieved only when Cellex P, Chelex 100 or Amberlite XAD-2 have been used.     

Enzyme electrode probes obtained by electropolymerization of monomers with PMS and selected dehydrogenase enzymes

5-methylphenazonium methylsulphate, (commonly named phenazine methosulphate, PMS) mediated electroxidation of beta-nicotinamide adenine dinucleotide (phosphate), reduced form, (NAD(P)h), on platinum, gold and carbon electrodes has been studied by electropolymerization of 1,2-, 1,3-, 1,4-diaminobenzene (DAB), pyrrole-2-carboxylic acid (PY-2-COOH) and 4,4'-dihydroxybenzophenone (DHB) in presence of PMS using cyclic voltammetry. The electroxidation of ascorbic acid has been evaluated on the electrodes electropolymerized in absence and in presence of PMS. The same experiments have been carried out with NAD(P)H in solution. Results showed that the NAD(P)H is oxidised by PMS coimmobilized with the polymer film on the electrode surface. NAD(P)H has been measured in the range 10(-6)-10(-2)mol l(-1) with a detection limit of 5 x 10(-7) mol 1(-1). Amperometric measurements of NAD(P)H have been carried out at -0.10 V and the efficiency of different elecrodes based on different materials has been studied. The electropolymerization has been also carried out in presence of PMS and selected dehydrogenase enzymes. The activity of these enzymes has been tested amperometrically at -0.1 V. Enzyme substrates such as glucose, lactate and glutamate have been measured in the range 5 x 10(-6)-1 x 10(-2) mol 1(-1) with a detection limit 1 x 10(-6) mol 1(-1). Also the stability of these probes during time has been evaluated.     

Highly stereoselective synthesis, structure, and application of (E)-9-[2-(silyl)ethenyl]-9H-carbazoles

(E)-N-(Silyl)vinylcarbazole has been easily prepared via a new catalytic route, silylative coupling (SC) of vinylcarbazole with vinyltrisubstituted silanes catalyzed by [RuH(Cl)(CO)(PCy3)2]. X-ray structures of two silylvinylcarbazoles as first N-vinylcarbazole derivatives have been resolved. The Pd-catalyzed Hiyama coupling reaction (also as the tandem reaction with SC) of synthesized (E)-N-(triethoxysilyl)vinylcarbazole with iodobenzene has been performed to afford (E)-N-(phenylvinyl)carbazole with high yield and stereoselectivity.     

Vibrational spectra and natural bond orbital analysis of the herbicidal molecule 2(4-chlorophenoxy)-2-methyl propionic acid

The herbicide 2(4-chlorophenoxy)-2-methyl propionic acid (MCPP) has been subjected to NIR FT-Raman and infrared spectral studies. The optimized molecular structure, vibrational wavenumbers, IR intensities and Raman activities have been calculated by using density functional method (B3LYP) with the standard 6-31G(d) basis set. The calculated molecular geometry has been compared with the XRD data. The detailed assignments of the normal modes have been performed based on the potential energy distribution (PED) following the scaled quantum mechanical force field (SQMFF) methodology. The IR and Raman spectra have been plotted for the calculated wavenumbers. The simulated spectra satisfactorily coincide with the experimental spectra. The strong hyperconjugative interaction and charge delocalization that leads to the stability of the molecule have been investigated with the aid of natural bond orbital (NBO) analysis.     

Sensitive spectrophotometric determination of bismuth(III) with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

The complex of the reagent 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) with Bi(III) has been studied. The composition and stability of this complex have been determined. An analytical method for the spectrophotometric determination of Bi(III) using its complex with 5-Br-PADAP has been developed. Variables influencing the method such as pH, wavelength, and time have been studied. The limitations of this method and the effect of interfering ions have been investigated. Comparison of this method with other methods cited in the literature for the determination of Bi(III) is also included.     

Extraction of gold(III) with (RS)-1-(4-chlorophenyl)-4,4-dimethyl-3-(1H-1,2,4-triazol-1-yl-methyl)-pentan-3-ol from hydrochloric acid solutions

Extraction of gold(III) with (RS)-1-(4-chlorophenyl)-4,4-dimethyl-3-(1H-1,2,4-triazol-1-ylmethyl)-pentan-3-ol from 3 M hydrochloric acid solutions (with chloroform as a diluent) has been studied. Optimal extraction conditions have been found. The reagent has been shown to extract efficiently metal ion from solutions containing 3 M hydrochloric acid due to formation of coordination bond between gold(III) and the N4 atom of the triazole ring. The coordination mechanism of gold(III) extraction has been proposed on the basis of the data obtained. Concentration constants of extraction have been calculated, and the thermodynamic parameters of extraction have been determined.     

Amperometric biosensor based on denatured DNA for the study of heavy metals complexing with DNA and their determination in biological, water and food samples

Amperometric biosensor (BS) has been elaborated based on the stationary mercury-film electrode (SMFE) with silver support and cellulose nitrate (CN) membrane containing immobilized single-stranded DNA (ssIDNA). The sorption isotherms and ssDNA-heavy metal binding constants have been obtained with the BS. According to these data, the chosen heavy metals form the following series of binding strength with ssIDNA: Pb(II)>Fe(III)>Cd(II). It has been found that upon the competitive adsorption, there exists practically simultaneous sorption of different ions at ssIDNA containing membrane. The method of the determination of heavy metals based on preconcentration of metal ions on the BS followed by the destruction of DNA-metal complexes with ethylenediamine tetraacetate (EDTA) and voltammogram recording has been proposed. The lower limits of detectable contents are 1.0x10(-10), 1.0x10(-9) and 1.0x10(-7) mol l(-1) for Pb(II), Cd(II) and Fe(III), respectively. Heavy metals have been assayed in natural and drinking water, milk and blood serum samples even under simultaneous presence with a selectivity factor of 1:10. The effect of matrix components has been estimated.     

Ab initio and kinetic calculations for the reactions of Cl with SiH(n)Cl(4-n) (n=1,2,3,4)

The direct hydrogen abstraction reactions of Cl atom with SiH(n)Cl(4-n) (n=1,2,3,4) have been studied systematically using ab initio molecular orbital theory. Geometries have been optimized at the MP2 level with 6-311+G(d) basis set, QCISD(T)/6-311+G(d,p) has been used in the final single point energy calculation. The kinetic calculations of these reactions have been explored using the canonical variational transition (CVT) state theory method with small-curvature tunneling (SCT) effect correction over the temperature range of 200-2000 K. The CVT/SCT rate constants exhibit typical non-Arrhenius behavior and three-parameter rate-temperature formulas have been fitted for the reactions of Cl with SiH4, SiH3Cl, SiH2Cl2, and SiHCl3, respectively (in unit of cm(3) molecule(-1) s(-1)). The calculated CVT/SCT rate constants are in agreement with the available experimental values.     

Photomagnetic properties in a series of spin crossover compounds

The spin crossover (SC) compounds [Fe(PM-AzA)2(NCX)2] and [Fe(PM-FIA)2(NCX)2] (with PM-AzA = N-2'-pyridylmethylene-4-(phe-nylazo)aniline, PM-FIA = N-2'-pyridylmethylene-4-(2-amino)fluorene, and X = S, Se) have been prepared. The SC regimes have been deduced from variable-temperature magnetic susceptibility data. The enthalpy and entropy changes associated with the SC have been evaluated from DSC measurements. A cooperativity factor, C, has been defined, and its values for the different compounds have been deduced from the spin crossover curves. At 10 K, the light-induced excited spin state trapping (LIESST) effect has been observed within the cavity of the SQUID magnetometer. The critical temperatures Tc(LIESST) have been determined for [Fe(PM-AzA)2(NCS)2] and [Fe(PM-F1A)2(NCX)2], and the role of cooperativity has been analyzed. A linear correlation has been found between the Tc(LIESST) and C values. The kinetics of HS-->LS relaxation have been investigated; a thermally activated mechanism at elevated temperatures and a nearly temperature independent relaxation behavior at low temperatures have been found. Finally, the magnetic behavior recorded under light irradiation in the warming and cooling modes has revealed the occurrence of the light-induced thermal hysteresis (LITH) effect.     

The formation of Pt(P–P)(X)(COAr) (X=Cl, I; Ar=Ph, 2-Tioph) complexes via insertion of carbon monoxide

Pt(diphosphine)X(aryl) complexes [diphosphine = 1,3-bis(diphenylphosphino)propane (dppp); aryl=phenyl, 2-thiophenyl; X=Cl, I] have been reacted with carbon monoxide in chloroform. It has been revealed by in situ NMR studies that the starting compounds insert carbon monoxide into the Pt-aryl group resulting in Pt(diphosphine)X{C(O)aryl} complexes. It has been found that the phenyl complexes are much more reactive than the corresponding 2-thiophenyl complexes. Similarly, higher reactivity has been observed with iodo than with the chloro complexes.     

A Spectrophotometric Study of Fe(III) Chelates of Some Hydroxy Coumarin Derivatives

Chelates formation of Fe(III) with 7–hydroxy–4–methyl coumarin–6–carboxylic acid (HMCCH)₂ and 8–amino–7–hydroxy–4–methyl coumarin (AHMCH) have been studied. It has been observed that Fe(III) forms 1:2 (metal:ligand) chelates with HMCCH₂ and AHMCH. The stability constants of these chelates at different ionic strengths and the effect of temperature on the stability constants of these chelates have been studied. The thermodynamic parameters such as entropy change (ΔS), free energy of formation (ΔG) and enthalpy change (ΔH) have also been calculated. The effect of dielectric constant oh the stability constants of these chelates have been studied. Estimation of nanogram quantities of Fe(III) with these ligands and the effect of diverse ions have also been studied and the results have been compared with other methods used for estimation of Fe(III).     

Enhancement of electroluminescence intensity in poly(3-alkylthiophene) with different alkyl side-chain length by doping of fluorescent dye

Electroluminescent diodes utilizing poly(3-alkylthiophene) (PAT) containing fluorescent dyes have been fabricated and their unique enhancement of emission characteristics have been studied. Remarkable enhancement of the electroluminescence efficiency has been observed for diodes with PAT doped with oxadiazole derivative (2-(4-biphenylyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole; PBD) and perylene derivative (N,N′ - Bis(2,5 - di - tert - butylphenyl) - 3,4,9,10 - perylenedi- carboximide; BPPC). The mechanism of emission enhancement by doping of PBD into PAT has been discussed with different alkyl side-chain lengths. © 1997 John Wiley & Sons, Ltd.     

Study on the interaction of lanthanum(III) with adrenaline

Lanthanum(III) equilibria in the presence of adrenaline have been investigated by potentiometric titration under physiological conditions (37°C and an ionic strength of 0.15?M NaCl). The interaction of lanthanum(III) with adrenaline has also been studied using an ab initio method. The complex species in the lanthanum(III)–adrenaline system have been ascertained and the protonation constants for adrenaline and the stability constants for lanthanum(III) complexes with adrenaline have been obtained. Adrenaline can form stable lanthanum(III) complexes with the phenolic hydroxyl group of adrenaline as the binding site of lanthanum(III).     

New phytoactive polymers prepared by polycondensation

Some new poly(ether-ester)s (PEEs) and poly(ether-amide)s (PEAs) with polyether sequences linked by tartrate units have been synthesized. Derivatives bearing residues from the synthetic plant-growth regulator 1-naphthylacetic acid (NAA) as pendent groups and end-groups have been prepared by esterification of PEEs and PEAs with NAA. Polymers bearing residues from pyridine-2, 6-dicarboxylic acid (a herbicide) in the main chain have been prepared. The hydrolysis has been found to depend on the structure of the polymer carrier, on pH of the medium and on the ability of the polymers to form complexes with polyacids. The phytosanitary activity of the new polymers has been related to the particular features of their hydrolysis behaviour.     

Kinetics and mechanism of the reactions of CH3CO and CH3C(O)CH2 radicals with O2. Low-pressure discharge flow experiments and quantum chemical computations

The reactions CH(3)CO + O(2)--> products (1), CH(3)CO + O(2)--> OH +other products (1b) and CH(3)C(O)CH(2) + O(2)--> products (2) have been studied in isothermal discharge flow reactors with laser induced fluorescence monitoring of OH and CH(3)C(O)CH(2) radicals. The experiments have been performed at overall pressures between 1.33 and 10.91 mbar of helium and 298 +/- 1 K reaction temperature. OH formation has been found to be the dominant reaction channel for CH(3)CO + O(2): the branching ratio, Gamma(1b) = k(1b)/k(1), is close to unity at around 1 mbar, but decreases rapidly with increasing pressure. The rate constant of the overall reaction, k(2), has been found to be pressure dependent: the fall-off behaviour has been analysed in comparison with reported data. Electronic structure calculations have confirmed that at room temperature the reaction of CH(3)C(O)CH(2) with O(2) is essentially a recombination-type process. At high temperatures, the further reactions of the acetonyl-peroxyl adduct may yield OH radicals, but the most probable channel seems to be the O(2)-catalysed keto-enol transformation of acetonyl. Implications of the results for atmospheric modelling studies have been discussed.     

Determination of cadmium and copper with ET-AAS after electrochemical deposition on a graphite electrode

The electrodeposition of cadmium and copper on a special graphite disk electrode has been performed at controlled potential. The electrode with the deposit has been inserted into the graphite atomizer HGA-400 by an adapted automatic sampler for the final determination by ET-ASS. The sensitivity of determination has been 0.371 (microg l(-1))(-1) for cadmium and 0.025 (microg l(-1))(-1) for copper for 2 min electrodeposition and increased linearly with the time of deposition. The limit of detection (3s(bl)) has been 7.9 ng l(-1) Cd(2+) and 0.11 microg l(-1) Cu(2+) for 2 min deposition and it has been improved with increased time of electrodeposition. The technique has been applied to the determination of both metals in seawater and to speciation in the presence of EDTA complexing agent.     

A novel tricarbonyl rhenium complex of 2-benzoylpyridine - Synthesis, spectroscopic characterization, X-ray structure and DFT calculations

The reaction of Re(CO)₅Cl with 2-benzoylpyridine (bopy) has been examined and a novel Re(CO)₃⁺ tricarbonyl - fac-[Re(CO)₃(bopy)Cl] - has been obtained. The compound has been studied by IR, UV-Vis spectroscopy and X-ray crystallography. The molecular orbital diagram of the tricarbonyl has been calculated with the density functional theory (DFT) method. The spin-allowed singlet-singlet electronic transitions of [Re(CO)₃(bopy)Cl] have been calculated with the time-dependent DFT method, and the UV-Vis spectrum of the title compound has been discussed on this basis.     

Sulfonamide carbazole receptors for anion recognition

Carbazole-based receptors functionalized with two sulfonamide groups have been synthesized and their properties as anion receptors have been evaluated. The receptor with bis(trifluoromethyl)aniline groups has shown a very high affinity for halide ions, especially remarkable as only two hydrogen bonds are formed in the complexes. (1)H NMR and fluorescence titrations have been carried out and binding constants up to 7.9 × 10(6) M(-1) have been reached. X-ray structures have been obtained and a modelling study has shown the possible reasons for the large affinity of these compounds for halide anions.     

Synthesis, thermal, spectral and magnetic studies of complexes of Co(II), Ni(II), Cu(II), Ru(II), Pd(II) and Pt(II) with 2, 3-disubstituted quinazolin-(3H)-4-ones

A number of complexes of Co(II), Ni(II), Cu(II), Ru(II), Pd(II) and Pt(II) with 2-methyl-3-(carboxy methyl) quinazolin (3H)-4-one (MCMQ) and 2-phenyl-3-(carboxy methyl) quinazolin (3H)-4-one (PCMQ) have been synthesized and characterized by analytical, conductivity, thermal, magnetic, infrared, electronic, proton magnetic resonance and electron spin resonance spectral data. Based on analytical data, the stoichiometry and the association with other molecules of the complexes have been determined. Conductivity data show that all these complexes are nonelectrolytes. Infrared and PMR spectral data indicate that both the ligands are uninegative bidentate with all the metal ions. Based on electronic spectral data, the geometries of the complexes have been indicated. Electronic spectral parameters for Co(II) and Ni(II) and ESR parameters for Cu(II) complexes have been calculated and relevant conclusions have been drawn with respect to the nature of bonds present in them.     

Extraction of uranium(VI) and thorium(IV) from nitric acid solution by N-alkylcaprolactam

Extraction of uranium(VI), thorium(IV) from nitric acid has been studied with N-octylcaprolactam and N-(2-ethyl)hexylcaprolactam. Distribution coefficients of U(VI), Th(IV) and HNO₃ as a function of aqueous NHO₃ concentration, extractant concentration and temperature have been studied. The compositions of extracted species, thermodynamic parameters of extraction have been evaluated. Third phase formation in extraction of U(VI) has been studied. Back extraction behavior of U(VI) and Th(IV) from the organic phase has also been tested. The results obtained are compared with those obtained by using TBP under the same experimental conditions.