Infrared spectra of methylidynes formed in reactions of re atoms with methane, methyl halides, methylene halides, and ethane: methylidyne C-H stretching absorptions, bond lengths, and s character

Rhenium carbyne complexes (HC identical with ReH 3, HC identical with ReH 2X, HC identical with ReHX 2, [X = F, Cl, and Br] and CH 3C identical with ReH 3) are produced by reactions of laser-ablated Re atoms with methane, methyl halides, methylene halides, and ethane via oxidative C-H(X) insertion and alpha-hydrogen migration in favor of the carbon-metal triple bond. The stabilities of the carbyne complexes relative to other possible products are predicted by DFT calculations. The diagnostic methylidyne C-H stretching absorptions of HC identical with ReH 3 and its mono- and dihalo derivatives are observed on the blue sides of the precursor C-H stretching bands, and the frequency decreases and the bond length increases in the order of H, F, Cl, and Br, following the decreasing s character in hybridization for the C-H bond. The dihalo methylidynes have higher C-H stretching frequencies and s characters than the monohalo species. The rhenium methylidynes have C s structures, and as a result the HC identical with ReH 3 and CH 3C identical with ReH 3 complexes have two equivalent shorter and one longer Re-H bonds, as compared to the tungsten methylidyne HC identical with WH 3 with three equivalent W-H bonds.     

Effectiveness of universal pre-enrichment broth for recovery of Salmonella from selected dairy foods

The relative efficiencies of 2 Bacteriological Analytical Manual (BAM) pre-enrichments, lactose broth (LAC) and brilliant green water (BGW), were compared with Universal Pre-enrichment (UP) broth for the recovery of individual Salmonella serovars from instant nonfat dry milk (NFDM), dry whole milk (DWM), lactic casein (LC), and liquid whole milk (LWM). BGW was compared with UP broth for the analysis of NFDM and DWM but not with the other 2 matrixes. LAC was compared with UP broth for the analysis of LC and LWM. UP broth was made both from a commercial dehydrated preparation (UPC) and from individual ingredients (UPI). Bulk quantities of the selected dairy foods were inoculated with Salmonella serovars at levels intended to produce fractionally positive results, where at least half of the test portions analyzed, with one of the methods being evaluated, would be shown to be Salmonella-positive. For NFDM, in 6 of 9 experiments, with 2 different Salmonella serovars, BGW was significantly more productive than either UPI or UPC broth (p < 0.05). Salmonella was recovered from 118 of 180 test portions with BGW, from 25 of 180 test portions with UPC, and from 14 of 180 test portions with UPI. For DWM, in 2 of 4 experiments, with 2 different Salmonella serovars, BGW was significantly more productive than either UPI or UPC broth (p < 0.05). Salmonella was recovered from 67 of 80 test portions with BGW, from 36 of 80 test portions with UPC, and from 37 of 80 test portions with UPI. For LWM, in 9 of 9 experiments, with 3 different Salmonella serovars, there were no significant differences among the broths. Salmonella was recovered from 120 of 180 test portions with LAC, from 135 of 180 test portions with UPC, and from 129 of 180 test portions with UPI. For LC, in 5 of 7 experiments, with 2 different Salmonella serovars, both UPI and UPC broth were significantly more productive than LAC (p < 0.05). Salmonella was recovered from 42 of 140 test portions with LAC, from 114 of 140 test portions with UPC, and from 114 of 140 test portions with UPI. In addition, overall results showed that UPC and UPI broths were equivalent for the recovery of Salmonella from the foods tested, without regard to their performance in comparison with either LAC or BGW.     

Aryl- and alkenyllithium preparations and copper-catalyzed reaction between the derived magnesium reagents and the monoacetate of 4-cyclopentene-1,3-diol

[reaction: see text] Aryl- and alkenyllithiums, prepared by halogen-lithium exchange with lithium, exchange with n-(or t-)BuLi, stannane-lithium exchange with n-BuLi, and direct lithiation with n-BuLi, were transformed into magnesium reagents with MgCl2 and subjected to CuCN-catalyzed reaction with the title monoacetate. Except for the halogen-lithium exchange with n-BuLi, the other preparations of the lithium anions were found to be compatible with the CuCN-catalyzed reaction to afford S(N)2-type products efficiently.     

再生障碍性贫血患者中药治疗前后微量元素变化初步观察

对20例再生障碍性贫血患者（以下简称再障）头发中12种微量元素的含量进行测定，与正常人做对照，结果发现，阴虚型患者锂、钙、锶、铬显著减少，阴虚型患者锌、镁、钡、钙、锂明显下降，阴阳俱虚型患者则12种元素均减少，并对本院治疗再障贫血的24味中药的微量元素的含量也进行测定。结合微量元素变化对指导再障的辩证组方和辩证施治提供新的思路，同时系统观察再障贫血10例治疗前后微量元素的变化情况，从微量元素角度探求再障的发症因素，认为与部分微量元素缺乏有关，补充相关的微量元素，再障患者可恢复健康。     

Electrochemical Characterization of the Interaction of Multiwalled Carbon Nanotubes with Doxorubicin

It has been suggested that multiwalled carbon nanotubes (MWCNTs) interacting with pharmaceutics may be introduced into the body as nanocarriers. To deliver the anticancer drugs, covalent or noncovalent functionalization of MWCNTs is required. In this study, the influence of oxidation on MWCNTs in the interaction with chemotherapeutic drug, doxorubicin, was characterized. The binding of doxorubicin with MWCNTs decreased rapidly with the increasing oxidation period with sulfuric acid. However, with nitric acid, the interaction increased initially and slowly decreased with time. The best results were obtained for sulfuric and nitric acid following 1 and 3?h of oxidation, respectively. The results show that sulfuric acid provided more favorable interaction for MWCNTs with doxorubicin than nitric acid.     

Cinnamate ester containing liquid crystalline side chain polymers

The synthesis of methacrylate esters of 4-cyanophenyl-(4-(ω-hydroxyalkyloxy)) cinnamates, with spacer lengths of 2 and 6 methylene units and the synthesis of the corresponding acrylate ester with a spacer of 2 methylene units are described. The methacrylate monomers were polymerized by free radical polymerization, both as homopolymers and as copolymers with the analogous benzoate monomer of spacer length 6. The acrylate ester could not be polymerized successfully under the same reaction conditions. Polymers were characterized by NMR spectroscopy, gel permeation chromatography, differential scanning calorimetry, and thermo-optic observations. Of the monomers prepared, only the cinnamate with a hexamethylene spacer shows a mesophase, seen on supercooling of the melt. All of the polymers prepared were liquid crystalline, with smectic behavior predominating in the polymethacrylates with the longer spacer group. A narrow nematic region is seen just below the clearing temperature with a range of 3–9°C, nematic character is increased in the copolymer series with the degree of incorporation of the cinnamate monomer with the spacer group of length 2.     

Reaction of Lithium Cellulosate with Episulfides

The reactions of propylene, ethylene, and styrene sulfide with cotton fabrics in the form of their lithium cellulosate derivative, obtained by metallation with lithium methoxide, were studied. Both graft and homo-polymerization took place and in the reaction with propylene and ethylene sulfide, cotton fabrics with high polysulfide content were obtained. With propylene sulfide 50% of the monomer polymerized was grafted. The effects of monomer concentration, cellulosate degree of substitution, reaction time, and solvent on the polymerization were investigated. In contrast with propylene and ethylene sulfide, only small conversions were obtained in the reaction with styrene sulfide. The results were attributed to steric effects.     

174例男性不育症患者精浆微量元素检测与分析

检测了174例男性不育症患者精浆锌、铁、铅、钙、镁等五种微量元素,以探讨不育症患者精浆微量元素含量与精液质量的关系。结果显示：（1）粘稠性精液组精浆锌含量显著低于正常粘度精液组（P＜0．01）,精浆钙含量低于正常度精液组（P＜0．05）,铁、铅、镁含量无差异（P＜0．05）。（2）无精子及少精子症组精浆铁、钙含量高于精子密度正常组（P＜0．01）,铜含量低于精子密度正常组（P＜0．01）,锌、镁含量无差异（P＜0．05）。（3）精子活动率低下组与正常组浆微量元素含量无差异（P＜0．05）。提示精浆锌、铁、铅、钙等微量元素含量改变是影响精液质量的重要原因之一。精浆镁含量与精液质量似无明显关系。     

微波辅助流动萃取槐花中的黄酮类成分

槐花为豆科落叶乔木槐树(Sophora japonica L.)的花蕾,槐花能降低血管的通透性,所含芸香甙(芦丁)对心脏传导系统有抑制作用,能增强收缩力及输出量,降低血压;所含槲皮素可以扩张冠状动脉,降低心肌耗氧量,并能降低血脂。     

Interfacial syntheses of polyphosphonate and polyphosphate esters. II. Dependence of yield and molecular weight on solvent volumes and concentrations of comers in basic polymerization of hydroquinone and phenylphosphonic dichloride

The interfacial polymerizations of hydroquinone with phenylphosphonic dichloride, in the presence of barium hydroxide or sodium hydroxide, were studied and contrasted. Polymer yields and molecular weights were shown to vary with concentration of the comer reactants, with the comer ratio, and with the relative amounts of carbon tetrachloride and aqueous phases, but not with concentration of barium ion. The latter supports the impression that the reaction zone is situated in the aqueous phase. The method of Millich and Carraher, employing pH control, yields products of high molecular weights and some results which are distinct from those achieved with the use of sodium hydroxide.     

Determination of ascorbic acid with o-iodosobenzoate: analysis of mixtures of ascorbic acid with methionine and cysteine or glutathione

Ascorbic acid has been determined in pure solutions, pharmaceutical preparations, food-stuffs and biological fluids by titration with o-iodosobenzoate, with visual or photometric detection of the end-point, with leuco-2,6-dichlorophenolindophenol plus potassium iodide as indicator. Cysteine and glutathione, which interfere quantitatively, are masked by cyanoethylation; the cyanoethylated product and methionine have been determined with o-iodosobenzoate in the presence of acidified potassium bromide, with Methyl Red as indicator. Procedures are given for the analysis of mixtures of ascorbic acid with sulphur-containing amino-acids.     

乳腺癌术前灰阶超声与彩色多普勒超声联合应用对预后的预测价值

目的探究乳腺癌术前灰阶超声与彩色多普勒超声联合应用对预后的预测价值。方法选取温州医科大学附属第一医院2013年5月—2015年5月期间收治的乳腺癌患者83例,治疗前均行灰阶超声与彩色多普勒超声检查,分析患者超声检查结果、临床征象与术后随访2年期间患者预后的关系,从而分析术前灰阶超声与彩色多普勒超声联合应用对乳腺癌患者预后的预测价值。结果乳腺癌肿块边界清晰、边界不清晰、边界恶性晕的患者2年无瘤生存率依次降低,边界恶性晕与边界不清晰患者死亡率均显著高于边界清晰患者(P0.05);肿瘤≥2 cm患者2年无瘤生存率显著低于2 cm患者;淋巴结转移患者2年无瘤生存率显著低于无转移患者(P0.05);血流分级Ⅱ级患者2年无瘤生存率明显低于0级(P0.05),Ⅲ级患者2年无瘤生存率显著低于0级和Ⅰ级(P0.05)。结论乳腺癌患者术前联合应用灰阶超声与彩色多普勒超声检查可确定肿瘤边界、大小及淋巴转移等征象,其与患者无瘤生存率、死亡率等预后指标密切相关,可作为预测乳腺癌患者预后的重要方法。     

阿托伐他汀联合缬沙坦对慢性肾炎的临床疗效分析

目的研究阿托伐他汀联合缬沙坦对慢性肾炎的临床疗效。方法以2014年1月—2016年6月慢性肾炎患者90例随机分为两组。单一药物组采用缬沙坦治疗,联合用药组采用阿托伐他汀联合缬沙坦治疗。比较两组患者慢性肾炎治疗总有效率;治疗前和治疗后患者肾功能指标、舒张压、收缩压的差异。结果联合用药组患者慢性肾炎治疗总有效率高于单一药物组,P0.05;治疗前两组肾功能指标、舒张压、收缩压比较无显著差异,P0.05;治疗后联合用药组肾功能指标、舒张压、收缩压改善幅度更大,P0.05。结论阿托伐他汀联合缬沙坦对慢性肾炎的临床疗效确切,可有效改善患者血压和肾功能,值得推广应用。     

Effective 1,5-, 1,6- and 1,7-remote stereocontrol in reactions of alkoxy- and hydroxy-substituted allylstannanes with aldehydes

Alk-2-enylstannanes with 4-, 5- and 6-alkoxy- or -hydroxy-substituents are transmetallated stereoselectively with tin(iv) halides to generate allyltin trihalides which react with aldehydes to give (Z)-alk-3-enols with useful levels of 1,5-, 1,6- and 1,7-stereocontrol. Alk-2-enylstannanes with a stereogenic centre bearing a hydroxy or alkoxy group at the 4-, 5- or 6-position, react with overall (Z)-1,5-, 1,6- and 1,7-syn-stereoselectivity with respect to the hydroxy and alkoxy substituents. The analogous reactions of alkoxy- and -hydroxyalk-2-enylstannanes with a methyl bearing stereogenic centre at the 4- or 5-position react with overall (Z)-1,5- and 1,6-anti-stereoselectivity with respect to the hydroxy and methyl substituents.     

Polymerization of allyl(vinyl phenyl) ethers and reactions of the resulting polymers

Solution polymerizations of allyl(o-vinyl phenyl)ether and allyl(p-vinyl phenyl)ether with cationic and radical initiators were investigated. Soluble polymers were formed in polymerizations with boron trifluoride etherate and with benzoyl peroxide. In polymerization with azobisisobutyronitrile the polymerization in dilute solution gave a soluble polymer, whereas that in concentrated solution gave a crosslinked, insoluble one. For informationon the polymerization behavior some infrared and ultraviolet spectroscopic investigations of the soluble polymers were made. From these results it appears that polymers with pendant allyl groups are formed in polymerization with boron trifluoride etherate at low temperature, and polymers containing pendant vinyl groups and allyl groups are obtained with the two types of radical initiator. Copolymerizations of these monomers with ethyl vinyl ether and styrene with the use of boron trifluoride etherate were sucessfully effected. Such reactions as Claisen rearrangement, crosslinking induced with radical initiators, and epoxidation with perbenzoic acid were examined for the polymers prepared in the polymerization with boron trifluoride etherate. Good results were obtained for the former two reactions. However, the latter was unsuccessful.     

Mesomorphic property of 2,5-dibenzoyloxy-, 5-benzoylamino-2-benzoyloxy-, and 2,5-dibenzoylamino-tropones with mono-, di-, and tri-alkoxyl groups on the benzoyl groups and their benzenoid derivatives

Mesomorphic properties of three-ring systems such as 2,5-dibenzoyloxytropones, 5-benzoylamino-2-benzoyloxytropones and 2,5-dibenzoylaminotropones with 4-alkoxy, 3,4-dialkoxy, and 3,4,5-trialkoxy groups on the benzoyl groups were investigated together with those of the corresponding benzenoids. Derivatives with two monoalkoxybenzoyl groups showed nematic and smectic A and C phases. Troponoid tetracatenars with two dialkoxybenzoyl groups had hexagonal columnar phases except for troponoids with two ester-connecting groups, whereas the corresponding benzenoids with two dialkoxybenzoyl groups were non-mesomorphic. All troponoid hexacatenars with two trialkoxybenzoyl groups formed hexagonal columnar phases. With the exception of benzenoid hexacatenars with two ester-connecting groups, the benzenoid hexacatenars showed hexagonal and tetragonal columnar phases. These mesomorphic properties were discussed from the standpoint of the difference of the core structure and the connecting group, where the amide-connecting group played a role to induce and enhance mesomorphic properties through hydrogen bonding.     

Chlorobiphenyls in sewage sludge; comparison of extraction methods

Six extraction methods for the analysis of PCBs (CB-28, CB-52, CB-101, CB-118, CB-138, CB-153 and CB-180) in sewage sludge were tested. A certified reference material (CRM 392) was used for the evaluation of the performance of the methods. Soxhlet-Dean-Starch with toluene as solvent, Soxhlet with hexane:acetone (2:3), cold digestion/saponification with 2 mol/L KOH in methanol followed by partition with hexane, and sonicated liquid-solid extraction with hexane:acetone (1:1) produced accurate results (97%, 93%, 104%, and 88%, respectively) with acceptable precisions (6.2%, 6.8%, 15% and 12%, respectively). Results in close agreement with the certified value for all congeners were obtained by treatment with BF₃-methanol prior to partition with dichloromethane. However, this is a tedious procedure and involves the use of hazardous compounds. Cyclic steam distillation produced results with an accuracy of around 80% and a good precision (5.2%). The very low consumption of solvents and other expensive chemicals by this technique and the possibility of analyzing the extract directly without clean-up make it an interesting alternative to the more sophisticated methods. Column elution with dichloromethane was found to be less efficient (61%), but it is a rapid, direct method with a low consumption of solvents and it may therefore serve as screening method. Received: 29 April 1997 / Revised: 30 July 1997 / Accepted: 6 August 1997     

Unexpected differences in the alpha-halogenation and related reactivity of sulfones with perhaloalkanes in KOH-t-BuOH

Most alkyl phenyl sulfones are readily alpha-chlorinated with CCl(4) and alpha-brominated with CBrCl3 in KOH-t-BuOH via radical-anion radical pair (RARP) reactions. While isopropyl mesityl sulfone (4) is easily alpha-chlorinated with CCl(4), it was completely recovered when treated with the more reactive CBrCl3. Subsequent investigations showed the latter result to be due to the poor acidity of 4 together with the rapid depletion of CBrCl3 and KOH by their reaction with each other, and led to a variety of other important results. 4-Hydroxyphenyl isopropyl sulfone (6) is unreactive with either CCl4 or CBrCl3 in KOH-t-BuOH, its phenoxide anion strongly reducing the electronegativity of the sulfonyl group, thereby inhibiting alpha-anion formation. This effect is reversed by the electron-withdrawing influence of two alpha-phenyls, so that benzhydryl 4-hydroxyphenyl sulfone (8) is readily alpha-halogenated in KOH-t-BuOH with CCl4 or CBrCl3. On further contact with KOH-t-BuOH the alpha-halogenated sulfones from 8 are decomposed into benzophenone and phenol. While the alpha-halogenated derivatives of 4-methoxyphenyl benzhydryl sulfone (9) are stable to base, they are decomposed even under mildly acidic conditions into 4-methoxyphenyl 4-methoxybenzenethiolsulfonate (9c), phenol, and benzophenone. Mono-alpha-halogenation of benzyl phenyl sulfone (10) enhances the rate of the subsequent halogenation, so that alpha,alpha-dihalogenation is attained while much substrate is still present and the mono-alpha-halogenated product is not detected. The ease of reductive debromination of alpha-bromo sulfones with Cl3C- was correlated with the stability of the formed alpha-anions, explaining the success with alpha-bromobenzylic sulfones but failure with alpha-bromoalkyl sulfones. In the presence of air and the absence of competing halogenation, formation of the alpha-anions of alkyl aryl sulfones is quickly accompanied by oxidative cleavage by atmospheric O2, leading to the formation of arenesulfonyl alcohols, arenesulfonyl halides, and haloarenes.     

Photolysis of organopolysilanes. The reaction of photochemically generated methylphenylsilylene with conjugated dienes

Photolysis of 2-phenylheptamethyltrisilane (I) in the presence of acyclic and cyclic conjugated dienes has been investigated using both a high-pressure mercury lamp with a quartz filter and a low-pressure mercury lamp with a Vycor filter. Irradiation of I in the presence of 1,3-butadiene, isoprene or 2,3-dimethylbutadiene with a high-pressure mercury lamp gave a product arising from photochemical isomerization of a silacyclopropane derivative and a compound apparently formed by 1,4-silylene addition, along with a 1/1 “ene” adduct of the diene to a photo-rearranged intermediate containing the silicon—carbon double bond. Irradiation of I in the presence of the conjugated diene with a low-pressure mercury lamp, followed by treatment of the product with methanol, afforded a methoxysilane arising from methanolysis of the corresponding silacyclopropane, together with the isomerization product, silacyclopentene and rearranged addition product. Irradiation of I in the presence of cyclopentadiene with a high-pressure mercury lamp produced methylphenylsilylcyclopentadiene, while irradiation of a similar mixture with a low-pressure mercury lamp followed by treatment with methanol gave 4-(methoxymethylphenylsilyl)-1-cyclopentene. With 1,3-cyclooctadiene, the photochemically generated methylphenylsilylene afforded many types of addition product. Photolysis of I in the presence of 1,3-cyclohexadiene, however, afforded none of the silylene addition products.     

Synthesis and copolymerization of new phosphorus‐containing acrylates

Two phosphorus‐containing acrylate monomers were synthesized from the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with triethyl phosphite. The selective hydrolysis of the ethyl ester monomer with trimethylsilyl bromide (TMSBr) gave a phosphonic acid monomer. The attempted bulk polymerizations of the monomers at 57–60 °C with 2,2′‐azobisisobutyronitrile (AIBN) were unsuccessful; however, the monomers were copolymerized with methyl methacrylate (MMA) in bulk at 60 °C with AIBN. The resulting copolymers produced chars on burning, showing potential as flame‐retardant materials. Additionally, α‐(chloromethyl)acryloyl chloride (CMAC) was reacted with diethyl (hydroxymethyl)phosphonate to obtain a new monomer with identical ester and ether moieties. This monomer was hydrolyzed with TMSBr, homopolymerized, and copolymerized with MMA. The thermal stabilities of the copolymers increased with increasing amounts of the phosphonate monomer in the copolymers. A new route to highly reactive phosphorus‐containing acrylate monomers was developed. A new derivative of CMAC with mixed ester and ether groups was synthesized by substitution, first with diethyl (hydroxymethyl)phosphonate and then with sodium acetate. This monomer showed the highest reactivity and gave a crosslinked polymer. The incorporation of an ester group increased the rate of polymerization. The relative reactivities of the synthesized monomers in photopolymerizations were determined and compared with those of the other phosphorous‐containing acrylate monomers. Changing the monomer structure allowed control of the polymerization reactivity so that new phosphorus‐containing polymers with desirable properties could be obtained. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2207–2217, 2003