Synthesis, structure and non-linear optical property of a copper(II) thiocyanate three-dimensional supramolecular compound

A novel copper(II) thiocyanate complex [Cu(im)₂(NCS)₂] 1 (im=imidazole) has been prepared and characterized by spectroscopic analysis and crystallographic method. This supramolecular compound exhibits a three-dimensional solid state structure constituted by N–HS hydrogen bonds and π–π stacking interactions. The compound in DMF solutions has a very strong third-order non-linear optical (NLO) behavior with absorption coefficient and refractive index ₂=1.18×10⁻¹¹ mw⁻¹, n₂=−9.00×10⁻¹⁶ m²w⁻¹, respectively, and third-order NLO susceptibility χ⁽³⁾ of 7.00×10⁻¹⁰ esu.     

New aspects of the reaction of silver(I) cations with the ethylenediaminetetraacetate ion

The highly neutralized ethylenediaminetetraacetate (EDTA) titrant (95–99% as Y⁴⁻ anion) precipitates with Ag⁺ cations to form the Ag₄Y species, in aqueous medium, which is well characterized from conductometric titration, thermal analysis and potentiometric titration of the silver content of the solid. The precipitate dissolves in excess Y⁴⁻ to form a complex, AgY³⁻. Equilibrium studies at 25°C and ionic strength 0.50 M (NaNO₃) have shown from solubility and potentiometric measurements that the formation constant (95% confidence level) β₁ = (1.93 ± 0.07) × 10⁵ M⁻¹ and the solubility products are K_S0 = [Ag +]⁴[Y⁴⁻] = (9.0 ± 0.4) × 10⁻¹⁸ M⁵ and K_S1 = [Ag +]³[AgY³⁻] = (1.74 ± 0.08) × 10⁻¹² M⁴. The presence of Na⁺, rather than ionic strength, markedly affects the equilibrium; the data at ionic strength 0.10 M are: β₁ = (1.19 ± 0.03) × 10⁶ M⁻¹, K_S0 = (1.6 ± 0.4) × 10⁻¹⁹ M⁵ and K_S1 = (1.9 ± 0.5) × 10⁻¹³ M⁴; at ionic strength tending to zero; β₁ = (1.82 ± 0.05) × 10⁷ M⁻¹, K_S0 = (2.6 ± 0.8) × 10⁻²² M⁵ and K_S1 = (5 ± 1) × 10⁻¹⁵ M⁴. The intrinsic solubility is 2.03 mM silver (I) in 0.50 M NaNO₃. Well-defined potentiometric titration curves can be taken in the range 1–2 mM with the Ag indicator electrode. Thermal analysis revealed from differential scanning calorimetry a sharp exothermic peak at 142°C; thermal gravimetry/differential thermal gravimetry has shown mass loss due to silver formation and a brown residue, a water-soluble polymeric acid (decomposition range 135–157°C), tending to pure silver at 600°C, consistent with the original Ag₄Y salt.     

Synthesis, crystal structure and third-order non-linear optical property of heterobimetallic cluster compound [MoOICu3S3(2,2′-bipy)2]

Nest-shaped cluster [MoOICu₃S₃(2,2′-bipy)₂] (1) was synthesized by the treatment of (NH₄)₂MoS₄, CuI, (n-Bu)₄NI, and 2,2′-bipyridine (2,2′-bipy) through a solid-state reaction. It crystallizes in monoclinic space group P2₁/n, a=9.591(2) Å, b=14.820(3) Å, c=17.951(4) Å, β=91.98(2)°, V=2549.9(10) ų, and Z=4. The nest-shaped cluster was obtained for the first time with a neutral skeleton containing 2,2′-bipy ligand. The non-linear optical (NLO) property of [MoOICu₃S₃(2,2′-bipy)₂] in DMF solution was measured by using a Z-scan technique with 15 ns and 532 nm laser pulses. The cluster has large third-order NLO absorption and the third-order NLO refraction, its ₂ and n₂ values were calculated as 6.2×10⁻¹⁰ and −3.8×10⁻¹⁷ m² W⁻¹ in a 3.7×10⁻⁴ M DMF solution.     

Electron transfer in organometallic clusters : XI. Redox chemistry of M3(CO)12(M = Ru, Os) and PPh3 derivatives; mechanism of catalysed nucleophilic substitution

The generality of a two-electron reduction process involving an mechanism has been established for M₃(CO)₁₂ and M₃(CO)₁₂−n(PPh₃)_n (M = Ru, Os) clusters in all solvents. Detailed coulometric and spectral studies in CH₂Cl₂ provide strong evidence for the formation of an ‘opened’ M₃(CO)₁₂²⁻ species the triangulo radical anions M₃(CO)₁₂^−· having a half-life of < 10⁻⁶ s in CH₂Cl₂. However, the electrochemical response is sensitive to the presence of water and is concentration dependent. An electrochemical response for “opened” M₃(CO)₁₂²⁻ is only detected at low concentrations < 5 × 10⁻⁴ mol dm⁻³ and under drybox conditions. The electroactive species ground at higher concentrations and in the presence of water M₃(CO)₁₁²⁻ and M₆(CO)₁₈²⁻ were confirmed by a study of the electrochemistry of these anions in CH₂Cl₂; HM₃(CO)₁₁⁻ is not a product. The couple [M₆(CO)₁₈]^−/2− is chemically reversible under certain conditions but oxidation of HM₃(CO)₁₁⁻ is chemically irreversible. Different electrochemical behaviour for Ru₃(CO)₁₂ is found when [PPN][X] (X = OAc⁻, Cl⁻) salts are supporting electrolytes. In these solutions formation of the ultimate electroactive species [μ-C(O)XRu₃(CO)₁₀]⁻ at the electrode is stopped under CO or at low temperatures but Ru₃(CO)₁₂^−· is still trapped by reversible attack by X presumably as [η¹-C(O)XRu₃(CO)₁₁]⁻. It is shown that electrode-initiated electron catalysed substitution of M₃(CO)₁₂ only takes place on the electrochemical timescale when M = Ru, but it is slow, inefficient and non-selective, whereas BPK-initiated nucleophilic substitution of Ru₃(CO)₁₂ is only specific and fast in ether solvents particulary THF. Metal---metal bond cleavage is the most important influence on the rate and specificity of catalytic substitution by electron or [PPN]-initiation. The redox chemistry of M₃(CO)₁₂ clusters (M = Fe, Ru, Os) is a consequence of the relative rates of metal---metal bond dissociation, metal-metal bond strength and ligand dissociation and in many aspects resembles their photochemistry.     

Collisional quenching of electronically excited germanium atoms, Ge[4p(S0)], by small molecules investigated by time-resolved atomic resonance absorption spectroscopy

The collisional quenching of electronically excited germanium atoms, Ge[4p²(¹S₀)], 2.029 eV above the 4p²(³P₀) ground state, has been investigated by time-resolved atomic resonance absorption spectroscopy in the ultraviolet at λ = 274.04 nm [4d(¹P₁⁰) ← 4p²(¹S₀)]. In contrast to previous investigations using the ‘single-shot mode’ at high energy, Ge(¹S₀) has been generated by the repetitive pulsed irradiation of Ge(CH₃)₄ in the presence of excess helium gas and added gases in a slow flow system, kinetically equivalent to a static system. This technique was originally developed for the study of Ge[4p²(¹D₂)] which had eluded direct quantitative kinetic study until recently. Absolute second-order rate constants obtained using signal averaging techniques from data capture of total digitised atomic decay profiles are reported for the removal of Ge(¹S₀) with the following gases (k_R in cm³ molecule⁻¹ s⁻¹, 300 K): Xe, 7.1 ± 0.4 × 10⁻¹³; N₂, 4.7 ± 0.6 × 10⁻¹²; O₂, 3.6 ± 0.9 × 10⁻¹¹; NO, 1.5 ± 0.3 × 10⁻¹¹; CO, 3.4 ± 0.5 × 10⁻¹²; N₂O, 4.5 ± 0.5 × 10⁻¹²; CO₂, 1.1 ± 0.3 × 10⁻¹¹; CH₄, 1.7 ± 0.2 × 10⁻¹¹; CF₄, 4.8 ± 0.3 × 10⁻¹²; SF₆, 9.5 ± 1.0 × 10⁻¹³; C₂H₄, 3.3 ± 0.1 × 10⁻¹⁰; C₂H₂, 2.9 ± 0.2 × 10⁻¹⁰; Ge(CH₃)₄, 5.4 ± 0.2 × 10⁻¹¹. The results are compared with previous data for Ge(¹S₀) derived in the single-shot mode where there is general agreement though with some exceptions which are discussed. The present data are also compared with analogous quenching rate data for the collisional removal of the lower lying Ge[4p²(¹D₂)] state (0.883 eV), also characterized by signal averaging methods similar to that described here.     

Comparison of the effects of visible femtosecond laser pulses and continuous wave laser radiation of low average intensity on the clonogenicity of Escherichia coli.

To evaluate the contribution of local pulsed heating of light-absorbing microregions to biochemical activity, irradiation of Escherichia coli was carried out using femtosecond laser pulses (λ = 620 nm, τ_p=3 × 10⁻¹³ s, f_p = 0.5 Hz, E_p = 1.1 × 10⁻³J cm⁻², I_av = 5.5 × 10⁻⁴ W cm⁻², I_p = 10⁹ W cm⁻²) and continuous wave (CW) laser radiation (λ = 632.8 nm, I = 1.3 W cm⁻²). The irradiation dose required to produce a similar biological effect (a 160%–190% increase in the clonogenic activity of the irradiated cells compared with the non-irradiated controls) is a factor of about 10³ lower for pulsed radiation than for CW radiation (3.3 × 10⁻¹ and 7.8 × 10² J cm⁻² respectively). The minimum size of the microregions transiently heated on irradiation with femtosecond laser pulses is estimated to be about 10 Å, which corresponds to the size of the chromophores of hypothetical primary photoacceptors—respiratory chain components.     

Pulse radiolysis study of reactions of alkyl and alkylperoxy radicals originating from methyl tert-butyl ether in the gas phase

UV spectra and kinetics for the reactions of alkyl and alkylperoxy radicals from methyl tert-butyl ether (MTBE) were studied in 1 atm of SF₆ by the pulse radiolysis-UV absorption technique. UV spectra for the radical mixtures were quantified from 215 to 340 nm. At 240 nm. σ_R = (2.6 ± 0.4) × 10⁻¹⁸ cm² molecule⁻¹ and σ_RO2 = (4.1 ± 0.6) × 10⁻¹⁸ cm² molecule⁻¹ (base e). The rate constant for the self-reaction of the alkyl radicals is (2.5 ± 1.1) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹. The rate constants for reaction of the alkyl radicals with molecular oxygen and the alkylperoxy radicals with NO and NO₂ are (9.1 ± 1.5) × 10⁻¹³, (4.3 ± 1.6) × 10⁻¹² and (1.2 ± 0.3) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹, respectively. The rate constants given above refer to reaction at the tert-butyl side of the molecule.     

Anodic characterization of mercury microelectrodes for determinations of anions in real samples

The anodization of mercury microelectrodes was investigated in synthetic samples containing several strong and weak electrolytes at different concentrations. In particular, the effects on mercury anodization due to the presence of NaOH, HClO₄, NaCl, NaI, NaF, Na₂SO₄, NaHCO₃, Na₂CO₃, tartaric and citric acids, were studied in solutions containing either each species or mixtures of them, and without addition of supporting electrolyte. Some of the electrode processes studied led to linear calibration plots e.g. 1 × 10⁻⁵ − 1 × 10⁻⁴M Cl⁻, 1 × 10⁻⁶ − 1 × 10⁻⁵M I⁻, 5 × 10⁻⁴ − 3 × 10⁻³M SO₄²⁻, 5 × 10⁻⁴ − 2 × 10⁻²M HCO₃⁻, with typical correlation coefficients of 0.998–0.999. The anodization of mercury microelectrodes was also investigated directly in wine, rain, tap and mineral water, without pretreatment and without addition of supporting electrolyte. In the real samples only the ions Cl⁻ and HCO₃⁻ could be quantified, and the values found were in agreement, within 3–5%, with the reference values obtained by using Italian standard methods for food.     

Kinetics and mechanisms of the redox reaction of hexaaquotitanium(III) and the ethylenediamine tetraacetato titanium(III) complex by aqueous solutions of bromine

At 25°C, I = 1.0 M (CF₃SO₃⁻Li⁺+CF₃SO₃H), [H⁺] = 0.034–0.274 M and λ = 453 nm, the rate equation for the oxidation of Ti(H₂O), ₆³⁺ by bromine was found to be: −d/[Br₂]T/dt=kK/[Br₂][Ti^III]/[H⁺]+K+kK/[Br₃⁻][Ti^III]/[H⁺+K, where k = 9.2 × 10⁻³ M ⁻¹ s ⁻¹ and K = 4.5 × 10⁻³ M. At [H⁺] = 1.0 M, [Br⁻] = 0.05–0.4 M, the apparent second-order rate constant decreases as [Br⁻] increases.

The pH-dependence of the oxidation of Ti^III-edta by bromine is interpreted in terms of the change in identity of the Ti^III-edta species as the pH of the reaction medium changes. The second-order rate constants were fitted using a non-linear least-square computer program with (1/k₀^edta)² weighting into an equation of the form: k₀^edta =k₁+k₂K₁[H⁺]⁻¹+k₃K₁K₂[H⁺]^−2/1+K₁[H⁺[H⁺⁻¹+K₁K₂[H⁺]⁻², with K₁ and K₂ fixed as earlier determined at 9.55 × 10⁻³ and 2.29 × 10⁻⁹ M, respectively, for the oxidation of bromine. k₁=k₂=(3.1±0.32)×10³M⁻¹s⁻¹ k₃=(2.3±0.45)×10⁶N⁻¹s⁻¹.

It is proposed that these electron transfer reactions proceed by univalent changes with the production of Br₂^.− as a transient intermediate. An outer-sphere mechanism is proposed for these reactions. The homonuclear exchange rate for Ti^III-edta+Ti^IV-edta is estimated at 32 M⁻¹ s⁻¹.     

Voltammetric determination of glucose based on reduction of copper(II)–glucose complex at lanthanum hydroxide nanowire modified carbon paste electrodes

A novel voltammetric method for the determination of β-d-glucose (GO) is proposed based on the reduction of Cu(II) ion in Cu(II)(NH₃)₄²⁺–GO complex at lanthanum(III) hydroxide nanowires (LNWs) modified carbon paste electrode (LNWs/CPE). In 0.1 mol L⁻¹ NH₃·H₂O–NH₄Cl (pH 9.8) buffer containing 5.0 × 10⁻⁵ mol L⁻¹ Cu(II) ion, the sensitive reduction peak of Cu(II)(NH₃)₄²⁺–GO complex was observed at −0.17 V (versus, SCE), which was mainly ascribed to both the increase of efficient electrode surface and the selective coordination of La(III) in LNW to GO. The increment of peak current obtained by deducting the reduction peak current of the Cu(II) ion from that of the Cu(II)(NH₃)₄²⁺–GO complex was rectilinear with GO concentration in the range of 8.0 × 10⁻⁷ to 2.0 × 10⁻⁵ mol L⁻¹, with a detection limit of 3.5 × 10⁻⁷ mol L⁻¹. A 500-fold of sucrose and amylam, 100-fold of ascorbic acid, 120-fold of uric acid as well as gluconic acid did not interfere with 1.0 × 10⁻⁵ mol L⁻¹ GO determination.     

EPR and IR studies on the local structure of 80MoO3–20B2O3 glass

EPR lineshape simulation studies have been performed on a specimen of 80MoO₃–20B₂O₃ glass in the temperature range of 300–77 K. The values of the obtained spin Hamiltonian parameters are: g=1.940, g=1.974, A=150.0×10⁻⁴ cm⁻¹, A=35.6×10⁻⁴ cm⁻¹ and g=1.935, g=1.975, A=141.9×10⁻⁴ cm⁻¹, A=34.5×10⁻⁴ cm⁻¹ at 300 and 77 K, respectively. The paramagnetic site in the specimen is molybdenyl, MoO³⁺, ion in which the Mo is in a distorted octahedral environment of six oxygen atoms with C_4v symmetry. The 11-parallel and 11-perpendicular line feature of the EPR lineshape shows that two Mo nuclei are magnetically equivalent in the glassy matrix, in the temperature range 300–77 K.     

Electron paramagnetic resonance study of the reactions of tetrathiomolybdate with roussin salts and esters, and with some related iron nitrosyls

The tetrathiomolybdate ion [MoS₄]²⁻ reacts in DMF solution with Roussin esters Fe₂(SR)₂(NO)₄ (R = Me, Et, n-Pr, i-Pr, n-Bu,t-Bu, n-C₅H₁₁) to yield the paramagnetic iron nitrosyls [Fe(NO)₂(SR)₂]⁻ (1), [Fe(NO)₂(S₂MoS₂]⁻ (2) and [Fe(NO)(S₂MOS₂)₂]⁻ (3). The new complexes (2) and (3) have been characterized by EPR spectroscopy and the assignment to them of constitutions based respectively upon tetrahedral and square pyramidal iron is supported by EHMO calculations. Fe₂(SPh)₂(NO)₄ with [MoS₄]²⁻ yields only [Fe(NO)₂(SPh)₂]⁻, and preformed (3) reacts with PhS⁻ to give firstly EPR-silent species, and then [Fe(NO)₂(SPh)₂]⁻. The mononitrosyl (3) can also be formed by reaction of [MoS₄]²⁻ with [Fe₄S₃(NO)₇]⁻, Fe₄S₄(NO)₄, or Fe₂I₂(NO)₄.     

Simultaneous derivative spectrophotometric determination of thorium and uranium in a micellar medium

Derivative photometric methods for trace analysis of Th(IV) and UO₂(II), and their simultaneous determination in mixtures using 5,8-dihydroxy-1,4-naphthoquinone in a micellar medium are reported. Molar absorptivity and Sandell's sensitivity of 1:2 Th(IV) and 1:1 UO₂(II) complexes at their λ_max, 614.5 nm and 637.0 nm are, 1.19 × 10⁴ 1/mol/cm and 1.12 × 10⁴ 1/mol/cm and 1.95 × 10⁻² μg/cm² and 2.13 × 10⁻² μg/cm² μg/cm², respectively. Calibration graph is linear over the range 9.28 × 10⁻²−18.56 μg/ml of Th(IV) and 9.52 × 10⁻²−19.04 μg/ml of UO₂(II). Though presence of Th(IV) and UO₂(II) causes interference in each others determination, 9.28 × 10⁻¹−9.28 μg/ml Th(IV) and 9.52 × 10⁻¹−9.52 μg/ml UO₂(II) when present together, can be simultaneously determined using derivative spectra.     

Isotopic exchange reactions between iron-sulphur-nitrosyl clusters and nitrite

The anion [Fe₄S₃(NO)₇]⁻ undergoes slow exchange with labelled nitrite [¹⁵NO₂]⁻ to yield a product [Fe₄S₃(¹⁴NO)(¹⁵NO)₆]⁻ in which complete isotopic exchange has occurred at the basal Fe(NO)₂ groups, but with no exchange at the apical Fe(NO) group. The neutral Fe₄S₄(NO)₄ reacts rapidly with [¹⁵NO₂⁻ to give fully exchanged [Fe₄S₃(¹⁵NO)₇]⁻, and it is proposed that the conversion proceeds by fragmentation, followed by complete isotopic exchange and rapid reassembly. The binuclear anion [Fe₂S₂(NO)₄]²⁻ also yields, with [¹⁵NO₂]²⁻ in CD₂Cl₂ solution, the fully exchanged [Fe₄S₃(¹⁵NO)₇]⁻, and a mechanism involving successive fragmentation, exchange and reassembly steps is proposed; however in aqueous solution, a clean exchange reaction occurs to give [Fe₂S₂(¹⁵NO)₄]²⁻. Neutral binuclear esters Fe₂(SR)₂(NO)₄ (R = Me, Et, or Ph) with [¹⁴NO₂]⁻ yield the mononuclear paramagnetic [Fe(¹⁴NO)₂(¹⁴NO₂)₂]⁻, and with [¹⁵NO₂]⁻ the analogous [Fe(¹⁵NO)₂(₁₅NO₂)₂]⁻.     

Phosphorescence of biacetyl sensitized by benzene in gas phase pulse radiolysis

The phophorescence of biacetyl induced by an energy transfer to biacetyl from triplet benzene produced in the pulse radiolysis of benzene-biacetyl mixtures has been studied. The time required to reach the maximum intensity of phosphorescence, t_max, after the electron pulse, varies as a function of biacetyl pressure at constant benzene pressure (40 torr), which gives the lifetime of triplet benzene τ = (6.7 ± 3.2) × 10⁻⁶ s and the rate constant of the energy transfer k_{C6H6^*(T1) + biacetyl} = (1.6 ± 0.7) × 10⁻¹⁰ cm³ molecule⁻¹ s⁻¹.     

Dynamics of electronic polarization in molecular crystals

Dynamics of electronic polarization in the vicinity of charge carriers in molecular crystals is for the first time investigated here in connection with the carrier transport and intramolecular vibronic polarization. According to standard picture it has been assumed that the electronic polarization relaxation time is extremely short, as estimated from the relation τ_c = τ_d1 ≈ h/E_exc, where E_exc is the energy of the first single exciton state. In the case of anthracene (Ac) crystals, the value of τ_e is about 2 × 10⁻¹⁶ s, i.e. by several orders of magnitude shorter than a typical hopping (residence) time of charge carriers τ_h = 10⁻¹⁴ -10⁻¹³ s. It is argued that typical time of full reconstruction of the electronic polarization after individual carrier hops equals, in the slow carrier regime, approximately to t_d2 ≈ h/ΔE_exc is the width of the lowest singlet-exciton band. In Ac, this means t_d2 ≈ 0.73 × 10⁻¹⁴ s. Physical implications of this relatively high value of t_d2 in connection with carrier transport and molecular (vibronic) polarization are discussed.     

Homo- and hetero-bridged mixed-valence dinuclear complexes which contain the fragment ‘Rh(C6F5)3’

The reaction of the anionic mononuclear rhodium complex [Rh(C₆F₅)₃Cl(Hpz)]^t- (Hpz = pyrazole, C₃H₄N₂) with methoxo or acetylacetonate complexes of Rh or Ir led to the heterodinuclear anionic compounds [(C₆F₅)₃Rh(μ-Cl)(μ-pz)M(L₂)] [M = Rh, L₂ = cyclo-octa-1,5-diene, COD (1), tetrafluorobenzobarrelene, TFB (2) or (CO)₂ (4); M = Ir, L₂ = COD (3)]. The complex [Rh(C₆F₅)₃(Hbim)]⁻ (5) has been prepared by treating [Rh(C₆F₅)₃(acac)]⁻ with H₂bim (acac = acetylacetonate; H₂bim = 2,2′-biimidazole). Complex 5 also reacts with Rh or Ir methoxo, or with Pd acetylacetonate, complexes affording the heterodinuclear complexes [(C₆F₅)₃Rh(μ-bim)M(L₂)]⁻ [M = Rh, L₂ = COD (6) or TFB (7); M = Ir, L₂ = COD (8); M = Pd, L₂ = η³-C₃H₅ (9)]. With [Rh(acac)(CO)₂], complex 5 yields the tetranuclear complex [{(C₆F₅)₃Rh(μ-bim)Rh(CO)₂}₂]₂₋. Homodinuclear Rh^III derivatives [{Rh(C₆F₅)₃}₂(μ-L)₂]^·- [L₂ = OH, pz (11); OH, S^tBu (12); OH, SPh (13); bim (14)] have been obtained by substitution of one or both hydroxo groups of the dianion [{Rh(C₆F₅)₃(μ-OH)}₂]²⁻ by the corresponding ligands. The reaction of [Rh(C₆F₅)₃(Et₂O)_x] with [PdX₂(COD)] produces neutral heterodinuclear compounds [(C₆F₅)₃Rh(μ-X)₂Pd(COD)] [X = Cl (15); Br (16)]. The anionic complexes 1–14 have been isolated as the benzyltriphenylphosphonium (PBzPh₃⁺) salts.     

Electrocatalytic response of norepinephrine at a thiolactic acid self-assembled gold electrode

The thiolactic acid (TLA) self-assembled monolayer modified gold electrode (TLA/Au) is demonstrated to catalyze the electrochemical response of norepinephrine (NE) by cyclic voltammetry. A pair of well-defined redox waves were obtained and the calculated standard rate constant (k_s) is 5.11×10⁻³ cm s⁻¹ at the self-assembled electrode. The electrode reaction is a pseudo-reversible process. The peak current and the concentration of NE are a linear relationship in the range of 4.0×10⁻⁵–2.0×10⁻³ mol l⁻¹. The detection limit is 2.0×10⁻⁶ mol l⁻¹. By ac impedance spectroscopy the apparent electron transfer rate constant (k_app) of Fe(CN)³⁻/Fe(CN)⁴⁻ at the TLA/Au electrode was obtained as 2.5×10⁻⁵ cm s⁻¹.     

Electrokinetic characterization of a microporous non-commercial polysulfone membrane: phenomenological coefficients and transport parameters

Electrical and electrokinetic phenomena (electrical resistance, streaming potential and membrane potential) in a porous polysulfone membrane was studied in the framework of the linear thermodynamics of irreversible processes and the phenomenological coefficients were determined for different concentrations of NaCl and MgCl₂ solutions (10⁻³M<5×10⁻²M). From experimental values, other characteristic membrane parameters such as the concentration of fixed charge in the membrane (=−3×10⁻³M), the ionic transport numbers and permeabilities through the membrane (t(Na⁺)=0.392 and t(Mg⁺²)=0.363; P(Na⁺)=3.5×l0⁻⁸m/sec and P(Mg⁺²)=2.9×10⁻⁸m/sec) were also obtained. Membrane surface-electrolyte solution interface was characterized by zeta potential values. The effect of both salt concentration and pH on zeta potential results was also studied.     

Fluorescence reaction and complexation equilibria between norfloxacin and aluminium (III) ion in chloride medium

Norfloxacin, 1-ethyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinoline carboxylic acid (NORH), reacts with aluminium(III) ion forming the strongly fluorescent complex [Al(HNOR)]³⁺, in slightly acidic medium. The complex shows maximum emission at 440 nm with excitation at 320 nm. The fluorescence intensity is enhanced upon addition of 0.5% sodium dodecylsulphate. Fluorescence properties of the Al-NOR complex were used for the direct determination of trace amounts of NOR in serum. The linear dependence of fluorescence intensity on NOR concentration, at a NOR to Al concentration ratio of 1:10, was found in the concentration range 0.001–2 μg/ml NOR with a detection limit of 0.1 ng/ml. The ability of aluminium (III) ion to form complexes with NOR was investigated by titrations in 0.1 M LiCl medium, using a glass electrode, at 298 K, in the concentration range: 2 × 10⁻⁴ ≤ [Al] ≤ 8 × 10⁻⁴; 5 × 10⁻⁴ ≤ [NOR] ≤ 9 × 10⁻⁴ mol/dm³; 2.8 ≤ pH ≤ 8.3. The experimental data were explained by the following complexes and their respective stability constants, log(β ± σ): [Al(HNOR)], (14.60 ± 0.05); [Al(NOR)], (8.83 ± 0.08); [A1(OH)₃(NOR)], (−14.9 ± 0.1), as well as several pure hydrolytic complexes of A1³⁺. The structure of the [Al(HNOR)] complex is discussed, with respect to its fluorescence properties.