聚乙烯吡咯烷酮对Pt/Ru双金属纳米簇的结构和催化性能影响

以乙二醇为还原剂,通过微波热辐射制备得到稳定的Pt/Ru双金属胶体纳米簇,各颗粒粒径在1~2nm范围。考察了聚合物聚乙烯吡咯烷酮（PVP）对Pt/Ru双金属纳米簇表面原子组成及催化性能的影响。结果表明,PVP与金属前体之间的不同相互作用影响Pt/Ru双金属纳米簇的形成。在Pt/Ru双金属纳米簇形成之前加入PVP,Pt原子更容易富集在双金属表面,有利于增加Pt在催化反应中的作用。在PVP稳定的Pt/Ru双金属纳米簇中,除了零价态的Pt、Ru单质外,还存在氧化态的Pt化合物,归因于PVP与Pt前体的相互作用。在环己烯加氢反应中,PVP-Pt/Ru双金属纳米簇显示出比单金属纳米簇更优越的催化性能。     

聚乙烯吡咯烷酮对Pt/Ru双金属纳米簇的结构和催化性能影响

以乙二醇为还原剂,通过微波热辐射制备得到稳定的Pt/Ru双金属胶体纳米簇,各颗粒粒径在1~2 nm范围。考察了聚合物聚乙烯吡咯烷酮(PVP)对Pt/Ru双金属纳米簇表面原子组成及催化性能的影响。结果表明,PVP与金属前体之间的不同相互作用影响Pt/Ru双金属纳米簇的形成。在Pt/Ru双金属纳米簇形成之前加入PVP,Pt原子更容易富集在双金属表面,有利于增加Pt在催化反应中的作用。在PVP稳定的Pt/Ru双金属纳米簇中,除了零价态的Pt、Ru单质外,还存在氧化态的Pt化合物,归因于PVP与Pt前体的相互作用。在环己烯加氢反应中,PVP-Pt/Ru双金属纳米簇显示出比单金属纳米簇更优越的催化性能。     

Differential SERS activity of gold and silver nanostructures enabled by adsorbed poly(vinylpyrrolidone)

We report that poly(vinylpyrrolidone) (PVP), a common stabilizer of colloidal dispersions of noble metal nanostructures, has a dramatic effect on their surface-enhanced Raman scattering (SERS) activity and enables highly selective SERS detection of analytes of various type and charge. Nanostructures studied include PVP-stabilized Au-Ag nanoshells synthesized by galvanic exchange reaction of citrate-reduced Ag nanoparticles (NPs), as well as solid citrate-reduced Ag and Au NPs, both before and after stabilization with PVP. All nanostructures were characterized in terms of their size, surface plasmon resonance wavelength, surface charge, and chemical composition. While the SERS activities of the parent citrate-reduced Ag and Au NPs are similar for rhodamine 6G (R6G) and 1,2-bis(4-pyridyl)ethylene (BPE) at various pH values, PVP-stabilized nanostructures demonstrate large differences in SERS enhancement factors (EFs) between these analytes depending on their chemical nature and protonation state. At pH values higher than BPE's pK(a2) of 5.65, where the analyte is largely unprotonated, the PVP-coated Au-Ag nanoshells showed a high SERS EF of >10(8). In contrast, SERS EFs were 10(3)- to 10(5)-fold lower for the protonated form of BPE at lower pH values, or for the usually highly SERS-active cationic R6G. The differential SERS activity of PVP-stabilized nanostructures is a result of discriminatory binding of analytes within-adsorbed PVP monolayer and a subsequent increase of analyte concentration at the nanostructure surface. Our experimental and theoretical quantum chemical calculations show that BPE binding with PVP-stabilized Au-Ag nanoshells is stronger when the analyte is in its unprotonated form as compared to its cationic, protonated form at a lower pH.     

SYNTHESIS OF POLYMER-STABILIZED PLATINUM/RUTHENIUM BIMETALLIC COLLOIDS AND THEIR CATALYTIC PROPERTIES FOR SELECTIVE HYDROGENATION OF CROTONALDEHYDE

Polymer-stabilized platinum/ruthenium bimetallic colloids （Pt/Ru） were synthesized by polyol reduction with microwave irradiation and characterized by TEM and XPS. The colloidal nanoparticles have small and narrow size distributions. Catalytic performance of the Pt/Ru colloidal catalysts was investigated on the selective hydrogenation of crontonaldehyde （CRAL）. A suitable amount of the added metal ions and base can improve the selectivity of CRAL to crotylalcohol （CROL） remarkably. The catalytic activity and the selectivity are dependent on the compositions of bimetallic colloids. Thereinto, PVP-stabilized 9Pt/1Ru colloid with a molar ratio of metals Pt：Ru = 9：1 shows the highest catalytic selectivity 77.3% to CROL at 333 K under 4.0 MPa of hydrogen.     

纳米金粒子与R-藻红蛋白的相互作用

以NaBH4为还原剂, 采用化学还原法制备了纳米金溶胶, 发现以pH=7的金前驱液还原得到的纳米金粒子具有最强的紫外吸收(525 nm), 当以聚乙烯吡咯烷酮(PVP)为稳定剂时, 此吸收紫移到510 nm. TEM观察金粒子大小为5~8 nm. PVP、聚乙烯醇(PVA)和吐温-80等能较好地稳定纳米金粒子, 而十二烷基苯磺酸钠、PEG-1000和OP乳化剂等则没有稳定作用. 以紫外-可见光谱(UV-Vis)、X光荧光光谱(XRF)、透射电子显微镜(TEM)等研究了纳米金粒子与R-藻红蛋白的相互作用, 发现R-藻红蛋白本身对纳米金粒子具有良好的稳定作用. 当R-藻红蛋白与纳米金粒子共存时, R-藻红蛋白所具有的538 nm吸收带强度有所增强, 并发生紫移, 同时578 nm的荧光强度也明显减弱, 这表明R-藻红蛋白与纳米金粒子的相互作用对R-藻红蛋白的空间结构产生了影响, 导致位于R-藻红蛋白外缘藻红素发色团(PEB)的微环境发生了改变. 凝胶柱层析及分光光度分析结果进一步证实了金纳米粒子与藻红蛋白存在明显的相互作用, 这种相互作用可能与藻红蛋白分子中所包含的氨基基团有关.     

Evidence of a unique electron donor-acceptor property for platinum nanoparticles as studied by XPS

In the interaction of PVP with Pt nanoparticles <7 nm in size, charge transfer is from carbonyl groups in PVP to Pt nanoparticles, whereas in the interaction of PVP with bulk Pt or Pt nanoparticles >25 nm in size, charge transfer is from Pt metal to the polymer side chain of PVP. There exists a critical nanoparticle size between 7 and 25 nm that would lead to a switch in the electron donor-acceptor property.     

PVP 稳定的纳米 Au 溶胶对葡萄糖液相选择氧化的催化性能

 采用化学还原法制备了聚乙烯吡咯烷酮 (PVP) 稳定的纳米 Au 溶胶, 这种 Au 溶胶在葡萄糖空气氧化制葡萄糖酸反应中具有良好的催化性能. 考察了 PVP 加入量和氯金酸前驱液的浓度对反应活性的影响. 紫外-可见吸收光谱和透射电镜分析结果表明, 含有较小 Au 粒子的 Au 溶胶体系具有较高的催化活性. 当 PVP/Au 质量比为 40, 氯金酸浓度为100 μg/ml 时, 得到稳定的 Au 溶胶体系具有金粒子尺寸小、分布均匀的特点, 对葡萄糖氧化反应活性高, 葡萄糖的转化率达到 54.4%.     

A facile synthesis and characterization of Ag, Au and Pt nanoparticles using a natural hydrocolloid gum kondagogu (Cochlospermum gossypium)

An environmentally benign method for the synthesis of noble metal nanoparticles has been reported using aqueous solution of gum kondagogu (Cochlospermum gossypium). Both the synthesis, as well as stabilization of colloidal Ag, Au and Pt nanoparticles has been accomplished in an aqueous medium containing gum kondagogu. The colloidal suspensions so obtained were found to be highly stable for prolonged period, without undergoing any oxidation. SEM-EDXA, UV-vis spectroscopy, XRD, FTIR and TEM techniques were used to characterize the Ag, Au and Pt nanoparticles. FTIR analysis indicates that -OH groups present in the gum matrix were responsible for the reduction of metal cations into nanoparticles. UV-vis studies showed a distinct surface plasmon resonance at 412 and 525 nm due to the formation of Au and Ag nanoparticles, respectively, within the gum network. XRD studies indicated that the nanoparticles were crystalline in nature with face centered cubic geometry. The noble metal nanoparticles prepared in the present study appears to be homogeneous with the particle size ranging between 2 and 10 nm, as evidenced by TEM analysis. The Ag and Au nanoparticles formed were in the average size range of 5.5±2.5 nm and 7.8±2.3 nm; while Pt nanoparticles were in the size range of 2.4±0.7 nm, which were considerably smaller than Ag and Au nanoparticles. The present approach exemplifies a totally green synthesis using the plant derived natural product (gum kondagogu) for the production of noble metal nanoparticles and the process can also be extended to the synthesis of other metal oxide nanoparticles.     

Probing the interaction of poly(vinylpyrrolidone) with platinum nanocrystals by UV-Raman and FTIR

The vibrational spectra of platinum nanoparticles (2.4-9 nm) capped with poly(N-vinylpyrrolidone) (PVP) were investigated by deep UV-Raman and FTIR spectroscopy and compared with those of pure PVP. Raman spectra of PVP/Pt show selective enhancement of C=O, C-N, and CH2 vibrational modes attributed to the pyrrolidone ring. Selective enhancement of ring vibrations is attributed both to the resonance Raman effect and SERS chemical enhancement. A red shift of the PVP carbonyl frequency on the order of 60 cm-1 indicates the formation of strong >C=O-Pt bonds. It is concluded that PVP adheres to the nanoparticles through a charge-transfer interaction between the pyrrolidone rings and surface Pt atoms. Heating the Pt nanoparticles under reducing conditions initiates the decomposition of the capping agent, PVP, at a temperature 100 degrees C below that of pure PVP. Under oxidizing conditions, both PVP/Pt and PVP degrade to form amorphous carbon.     

Radiation-assisted synthesis of iridium and rhodium nanoparticles supported on polyvinylpyrrolidone

The controlled synthesis of rhodium (Rh) and iridium (Ir) nanoparticles was carried out by gamma irradiation of aqueous solutions containing the metal precursor salt and polyvinylpyrrolidone (PVP). The nanoparticles were synthesized at various PVP and precursor concentrations with absorbed doses between 20 and 60 kGy. Nanoparticles with average sizes of 2.4 and 2.6 nm and narrow particle size distributions were obtained at metal precursor/PVP concentrations of 6/0.3 and 6/3 mM for Ir and Rh when irradiated at 60 kGy. The interaction of the nanoparticles surfaces with the PVP was studied.     

Pulsed sonoelectrochemical synthesis of size-controlled copper nanoparticles stabilized by poly(N-vinylpyrrolidone)

A novel sonoelectrochemical method for the size-controlled synthesis of spherical copper nanoparticles in an aqueous phase was developed. In this study, poly(N-vinylpyrrolidone) (PVP) was used as the stabilizer for the copper clusters. The copper nanoparticles were characterized by XRD, UV-vis, IR, DLS, TEM, and HRTEM. The PVP was found to greatly promote the formation rate of copper particles and to significantly reduce the copper deposition rate, thereby making monodispersed copper nanoparticles. We could control the particle size by adjusting various parameters such as current density, deposition, temperature, and sonic power, and improve the homogeneity of the copper particles. The results also showed that the transfer rate of PVP-stabilized copper clusters from the cathodic vicinity to the bulk solution played an important role in the preparation of the monodispersed nanoparticles.     

Size-controlled synthesis of colloidal platinum nanoparticles and their activity for the electrocatalytic oxidation of carbon monoxide

Using polyvinylpyrrolidone (PVP) as a stabilizing agent, stable colloidal solutions of platinum nanoparticles of different size distributions have been prepared by reducing H2PtCl6 with hydrogen. The UV-vis adsorption peaks at 258 nm due to the adsorption of Pt(IV) species disappear completely, indicating that the Pt(IV) species has been used up and colloidal Pt has been formed. The electrodes have been prepared from aqueous Pt colloids and glassy carbon (GC). The effect of platinum particle size of Pt/GC catalyst electrode on the electrocatalytic oxidation of carbon monoxide has been investigated. The voltammetry shows that a higher potential is needed for the oxidation of absorbed carbon monoxide with a decrease of the platinum particle size for particle sizes larger than 1 nm. But for particle sizes smaller than 1 nm, the potential remains constant while the activity decreases with decreasing the size. The snowlike, well-dispersed, and highly ordered platinum nanoparticles demonstrate high activity in the oxidation reaction of carbon monoxide. The reason may be due to the geometric structure of platinum nanoparticles.     

Biomolecule induced nanoparticle aggregation: effect of particle size on interparticle coupling

Gold nanoparticles of variable sizes have been prepared by reducing HAuCl(4) with trisodium citrate by Frens' method. It has been found that the gold particles under consideration produce well-ordered aggregates upon interaction with a biomolecule, glutathione in variable acidic pH condition and exhibit pronounced changes in their optical properties arising due to electromagnetic interaction in the close-packed assembly. The effect of nanoparticle size on the nature of aggregation as well as the variation in the optical response due to variable degree of interparticle coupling effects amongst the gold particles have been investigated. The optical properties of the gold aggregates have been accounted in the light of Maxwell-Garnett effective medium theory considering the changes in the filling factor in different aggregates produced by variable sizes of gold colloids. The aggregates have been characterized by UV-vis spectroscopy, FTIR, Raman, XRD and TEM studies. It has been observed that a new peak appearing at a longer wavelength intensifies and shifts further to the red from the original peak position depends on the particle size, concentration of glutathione and pH of the solution. On the basis of the first appearance of a clearly defined new peak at longer wavelength, a higher sensitivity of glutathione detection has been achieved with gold nanoparticles of larger dimension.     

Colloidal metal nanoparticles as a component of designed catalyst

Recent advances in the synthesis of colloidal metal nanoparticles of controlled sizes and shapes that are relevant for catalyst design are reviewed. Three main methods, based on colloid chemistry techniques in solution, i.e., chemical reduction of metal salt precursors, electrochemical synthesis, and controlled decomposition of organometallic compounds and metal-surfactant complexes, are used to synthesize metal nanoparticles. Their catalytic activity and selectivity depend on the shape, size and composition of the metal nanoparticles, and the support effect, as shown for many reactions in quasi-homogeneous and heterogeneous catalysis. A specially designed type of thermally stable catalysts--"embedded" metal catalysts, in which metal nanoparticles are isolated by porous support shells so that metal sintering is effectively avoided at high temperatures, are also introduced. The utilization of pre-prepared colloidal metal nanoparticles with tuned size, shape and composition as components of designed catalysts opens up new field in catalysis.     

Interaction of collagen and poly(vinyl pyrrolidone) in blends

The interaction between collagen and poly(vinyl pyrrolidone) (PVP) in blends has been studied by viscometry, differential scanning calorimetry (DSC) and by Fourier transform infrared spectroscopy (FTIR). It was found that the amide A and amide I bands position in FTIR spectra of collagen were shifted after blending with PVP to higher wavenumbers. DSC measurements showed different melting temperature, glass transition temperature and enthalpy for the blends and for the single components. Viscosity measurements showed interaction between collagen and PVP also in a dilute water solution.The results have shown, that the interactions between collagen and PVP exist due to the strong interactions between the synthetic and biological component, mainly by hydrogen bonds. These interactions caused that collagen and PVP are miscible at molecular level. The blending of collagen with PVP may give the possibility of producing new materials for potential biomedical applications.     

Photochemical preparation of poly(N-vinyl-2-pyrrolidone)-stabilized platinum colloids and their deposition on titanium dioxide

Preparation processes for Pt-deposited TiO(2) (Pt/TiO(2)) by the synthesis of Pt nanoparticles and their deposition were pursued by transmission electron microscopy, extended X-ray absorption fine structure, UV-vis spectroscopy, and Fourier transform infrared spectroscopic studies. Colloidal dispersions of Pt particles stabilized by poly(N-vinyl-2-pyrrolidone) (PVP) were photochemically synthesized in aqueous ethanol solution. The average diameter of Pt particles was estimated to be 2.0 +/- 0.5 nm, which was almost unchanged by changing the reducing agent from ethanol to methanol and 2-propanol. The PVP-stabilized Pt particles were distributed over a TiO(2) surface only by mixing the Pt colloidal dispersions and TiO(2). CO was chemically coordinated on the Pt particles on a TiO(2) surface after heat treatment was carried out in an O(2) flow at 673 K to completely remove the residual PVP on Pt/TiO(2). Hydrogen reduction at 473 K did not increase the amount of CO adsorbed on Pt sites. The Pt/TiO(2) catalyst after the oxidation treatment showed higher activity for CO photooxidation than that obtained for pure TiO(2) catalyst. The CO photooxidation rate was not unchanged by the H(2) reduction.     

Colloidal synthesis and structural control of PtSn bimetallic nanoparticles

PtSn bimetallic nanoparticles with different particle sizes (1-9 nm), metal compositions (Sn content of 10-80 mol %), and organic capping agents (e.g., amine, thiol, carboxylic acid and polymer) were synthesized by colloidal chemistry methods. Transmission electron microscopy (TEM) measurements show that, depending on the particle size, the as-prepared bimetallic nanocrystals have quasi-spherical or faceted shapes. Energy-dispersive X-ray (EDX) analyses indicate that for all samples the signals of both Pt and Sn can be detected from single nanoparticles, confirming that the products are actually bimetallic but not only a physical mixture of pure Pt and Sn metal nanoparticles. X-ray diffraction (XRD) measurements were also conducted on the bimetallic particle systems. When compared with the diffraction patterns of monometallic Pt nanoparticles, the bimetallic samples show distinct shifts of the Bragg reflections to lower degrees, which gives clear proof of the alloying of Pt with Sn. However, a quantitative analysis of the lattice parameter shifts indicates that only part of the Sn atoms are incorporated into the alloy nanocrystals. This is consistent with X-ray photoelectron spectroscopy (XPS) measurements that reveal the segregation of Sn at the surfaces of the nanocrystals. Moreover, short PtSn bimetallic nanowires were synthesized by a seed-mediated growth method with amine-capped bimetallic particles as precursors. The resulting nanowires have an average width of 2.3 nm and lengths ranging from 5 to 20 nm.     

液相脉冲激光烧蚀法制备高熔点的纳米金属粒子

采用液相脉冲激光烧蚀法成功地制备了高熔点的金属Pt、Ru与Ag纳米粒子. 采用SEM、TEM、ED和紫外-可见吸收光谱表征了纳米粒子的特征. 纳米粒子的粒径基本在数个到数十个纳米的大小范围内. 发现含适量PVP(poly(vinylpyrrolidone))的水溶液有利于纳米粒子的制备, 而且还能够提高纳米粒子悬浮液的稳定性. 该制备方法较简单, 在制备高熔点的纳米金属粒子方面有着其它方法所不能比拟的优势.     

Size and surface effects of prussian blue nanoparticles protected by organic polymers

Prussian blue (PB) nanoparticles protected by organic polymers such as poly(vinylpyrrolidone) (PVP) and poly(diallyldimethylammonium chloride) (PDDA) were prepared. Different experimental conditions (concentrations of Fe ions and feed ratios of Fe to the polymers) have been investigated to control the size of the PB nanoparticles. For example, the averaged dimensions of the PB nanoparticles were tuned from 12 to 27 nm by use of PVP in the different conditions. Addition of PDDA produced the PB nanoparticles with very small dimensions (5-8 nm) by an effective electrostatic interaction. We found that the surface environments of the PB nanoparticles affect the inherent properties of PB. The shifts of charge transfer (CT) absorptions from Fe(2+) to Fe(3+) in the PB nanoparticles resulted from the surface-protecting polymers. Especially, the PB nanoparticles with the PVP protection show high solubility in a variety of organic solvents and a solvent-dependent CT absorption. Measurement of the magnetic properties of the PB nanoparticles showed unprecedented size-dependency, surface effect, and superparamagnetic properties.     

Synthesis of Ag/Polypyrrole Core-Shell Nanospheres by a Seeding Method

Ag/polypyrrole (PPy) core‐shell nanospheres were fabricated through the redox reaction between pyrrole monomer and silver nitrate in the presence of polyvinylpyrrolidone (PVP) and by using the Ag colloidal nanoparticles acting as the seedings. The prepared nanospheres with a shell thickness of 10–12 nm and a core diameter of 20–40 nm are uniform in size and well dispersed. The morphologies, compositions, and electrochemical activities of Ag/PPy composites were characterized by TEM, XRD, FTIR, TGA and CV. The synthetic route employed here is gentle and can be extended to prepare other conducting polymer/inorganic nanocomposites.