Microspheres from stereocomplexes of polylactides containing ionic liquid end‐groups

Low‐molecular‐weight polymers of L ‐ and D ‐lactide containing different end‐groups (hydroxy, butoxy, trifluoromethoxy, heptafluorobutoxy, oxyethylimidazole groups, and groups derived from the imidazolium ionic liquid) are synthesized. It is shown that the nature of end‐groups affects the stereocomplexation of corresponding pairs of polymers. Stereocomplex of poly(L ‐lactide) and poly(D ‐lactide) containing imidazolium ionic liquid end‐groups (PLA‐IL) precipitates from 1,4‐dioxane solution in the form of monodisperse, perfectly spherical microspheres. Such behavior of PLA‐IL, not observed for polymers containing other end‐groups, can be attributed to the presence of strongly interacting ionic liquid end‐groups. This conclusion is supported by the results of ¹H NMR and dynamic light scattering experiments as well as by direct observation of precipitated particles by scanning electron microscopy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

A novel use of Ti‐POSS as initiator of L‐lactide ring‐opening polymerization

The efficacy of a metal‐silsesquioxane, namely, heptaisobutyl (isopropoxyde)titanium‐polyhedral oligomeric silsesquioxanes (Ti‐POSS), as initiator of the ring‐opening polymerization of L ‐lactide (LLA) has been assessed. Indeed, as demonstrated by proton nuclear magnetic resonance (¹H NMR) spectroscopy and gel permeation chromatography (GPC) measurements, a well‐controlled polymerization occurs via a coordination‐insertion mechanism. Moreover, the above reaction leads to the direct insertion of the silsesquioxane molecule into the polymer backbone, thus producing a hybrid system. Differential scanning calorimetry measurements demonstrated that in comparison with a commercial poly‐L ‐lactide (PLLA), the polymers prepared with Ti‐POSS exhibit a higher crystallinity. Indeed, the presence of silsesquioxane molecules, attached to one end of the polymer chains, has been found to appreciably affect the crystal nucleation density. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Effects of stereocomplexation on the physicochemical behavior of PLA/PEG block copolymers in aqueous solution

A series of polylactide/poly(ethylene glycol) (PLA/PEG) block copolymers were synthesized by ring‐opening polymerization of L ‐ or D ‐lactide in the presence of mono‐ or di‐hydroxyl PEG. The effects of stereocomplexation on the physicochemical behavior of PLA/PEG copolymers in aqueous solution were investigated by varying the degree of stereocomplexation or PLLA/PEG to PDLA/PEG ratio. In mixture solutions of insoluble and soluble copolymers, stereocomplexation strongly affects the solubility of the copolymers. In mixture solutions of soluble copolymers, both the size and aggregation number (N_agg) of the aggregates vary as a function of the degree of stereocomplexation. It is suggested that the size variation of the aggregates with increasing the degree of stereocomplexation is dependent on N_agg changes which are determined by two effects: the self‐adjusting of the aggregates so as to minimize the free energy and thus to increase the N_agg, and the kinetics of aggregation which tend to form more aggregates and thus to decrease the N_agg. Combination of the two opposite effects well explains the diverse variations of N_agg and size of the aggregates as a function of the degree of stereocomplexation. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Synthesis and characterization of silsesquioxane-cored star-shaped hybrid polymer via “grafting from” RAFT polymerization

Organic/inorganic hybrid polymers have been widely studied for their potential use in nanocontainers and nanocarriers.In this article,one star-shaped hybrid polymer,polyhedral oligomeric silsesquioxane (POSS) grafted poly (N,N-(dimethylamino) ethyl methacrylate)(POSS-g-PDMA),was synthesized via reversible addition-fragmentation chain transfer polymerization (RAFT).The pH stimuli-responsive character of POSS-g-PDMA in aqueous solution were also studied.     

Poly(lactide) stereocomplexes: formation, structure, properties, degradation, and applications

Poly(lactide)s [i.e. poly(lactic acid) (PLA)] and lactide copolymers are biodegradable, compostable, producible from renewable resources, and nontoxic to the human body and the environment. They have been used as biomedical materials for tissue regeneration, matrices for drug delivery systems, and alternatives for commercial polymeric materials to reduce the impact on the environment. Since stereocomplexation or stereocomplex formation between enantiomeric PLA, poly(L-lactide) [i.e. poly(L-lactic acid) (PLLA)] and poly(D-lactide) [i.e. poly(D-lactic acid) (PDLA)] was reported in 1987, numerous studies have been carried out with respect to the formation, structure, properties, degradation, and applications of the PLA stereocomplexes. Stereocomplexation enhances the mechanical properties, the thermal-resistance, and the hydrolysis-resistance of PLA-based materials. These improvements arise from a peculiarly strong interaction between L-lactyl unit sequences and D-lactyl unit sequences, and stereocomplexation opens a new way for the preparation of biomaterials such as hydrogels and particles for drug delivery systems. It was revealed that the crucial parameters affecting stereocomplexation are the mixing ratio and the molecular weight of L-lactyl and D-lactyl unit sequences. On the other hand, PDLA was found to form a stereocomplex with L-configured polypeptides in 2001. This kind of stereocomplexation is called "hetero-stereocomplexation" and differentiated from "homo-stereocomplexation" between L-lactyl and D-lactyl unit sequences. This paper reviews the methods for tracing PLA stereocomplexation, the methods for inducing PLA stereocompelxation, the parameters affecting PLA stereocomplexation, and the structure, properties, degradation, and applications of a variety of stereocomplexed PLA materials.     

Synthesis of optically active conjugated polymers containing platinum in the main chain: Control of the higher‐order structures by substituents and solvents

The Sonogashira–Hagihara coupling polymerization of d ‐hydroxyphenylglycine‐derived diiodo monomers 1–4 and platinum‐containing diethynyl monomer 5 gave the corresponding polymers [poly( 1–5 )–( 2–5 )] with number‐average molecular weights of 19,000–25,000 quantitatively. The polymers were soluble in CHCl₃, CH₂Cl₂, THF, and DMF. CD and UV–vis spectroscopic analysis revealed that amide‐substituted polymers [poly( 1–5 ) and poly( 2–5 )] formed chiral higher‐order structures in solution, while ester‐substituted polymers [poly( 3–5 ) and poly( 4–5 )] did not. Poly( 1–5 ) formed one‐handed helices in THF/toluene mixtures, while it formed chiral aggregates in THF/MeOH mixtures. Poly( 1–5 ) emitted fluorescence with quantum yields ranging from 0.8 to 1.3%. The polymers usually aggregated in the solid state. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2452–2461     

pH-responsive amphiphilic hybrid random-type copolymers of poly(acrylic acid) and poly(acrylate-POSS): synthesis by ATRP and self-assembly in aqueous solution

The synthesis and subsequent self-assembly of novel, random-type amphiphilic pH-responsive hybrid copolymers, having acrylic acid as pH-responsive hydrophilic and acrylate-polyhedral oligomeric silsesquioxane (POSS) as hydrophobic constituents are reported. The synthesis was carried out in two steps: first, t-butylacrylate and acrylate-POSS are copolymerized by ATRP, followed by the acid hydrolysis of t-butyl acrylate constituents of the synthesized poly(t-butylacrylate)-co-poly(acrylate-POSS) copolymers to achieve poly(acrylic acid)-co-poly(acrylate-POSS). It was found that POSS is a powerful hydrophobic unit. With very low POSS concentration in the copolymers, i.e., one POSS unit per 40 to 110 acrylic acid repeat units, the obtained amphiphilic hybrid copolymers could self-assemble in aqueous solution to form nanoaggregates, as revealed by the laser light scattering and fluorescence studies on the aqueous solutions of the obtained copolymers. The formation of hydrophobic core in the self-assembled aggregates is verified by the solubilization of pyrene (used as probe in fluorescence measurements) in aqueous solution of the copolymers. In addition to pH-dependent self-assembly behavior, it is also demonstrated that the particle size and aggregation number of the aggregates can be tuned simply by varying the composition of the copolymer, i.e., by changing the molar ratio of poly(acrylic acid) to poly(acrylate-POSS) in the copolymer. Finally, preliminary results on the influence of salt (NaCl) on the self-assembly of poly(acrylic acid)-co-poly(acrylate-POSS) in aqueous solution are also presented.     

Organic/inorganic hybrid star-shaped block copolymers of poly(l-lactide) and poly(N-isopropylacrylamide) with a polyhedral oligomeric silsesquioxane core: Synthesis and self-assembly

The star-shaped organic/inorganic hybrid poly(l-lactide) (PLLA) based on polyhedral oligomeric silsesquioxane (POSS) was prepared using octa(3-hydroxypropyl) polyhedral oligomeric silsesquioxane as initiator via ring-opening polymerization (ROP) of l-lactide (LLA). The molecular weight of POSS-containing star-shaped hybrid PLLA (POSSPLLA) can be well controlled by the feed ratio of LLA to initiator. The POSSPLLA was further functionalized into the macromolecular reversible addition-fragmentation transfer (RAFT) agent for the polymerization of N-isopropylacrylamide (NIPAM), leading to the POSS-containing star-shaped organic/inorganic hybrid amphiphilic block copolymers, poly(l-lactide)–block–poly(N-isopropylacrylamide) (POSS(PLLA–b–PNIPAM)). The self-assembly behavior of POSS(PLLA–b–PNIPAM) block copolymers in aqueous solution was investigated by dynamic light scattering (DLS), transmission electron microscopy (TEM) and atomic force microscopy (AFM). DLS showed the PNIPAM block in the aggregates is temperature-responsive and its phase-transition is reversible. TEM proved that the star-shaped POSS(PLLA–b–PNIPAM) amphiphilic block copolymers can self-assemble into the vesicles in aqueous solution. The vesicular wall and coronas are composed of the hydrophobic POSS core and PLLA, and hydrophilic PNIPAM blocks, respectively. Therefore, POSSPLLA and POSS(PLLA–b–PNIPAM) block copolymers, as a class of novel organic–inorganic hybrid materials with the advantageous properties, can be potentially used in biological and medical fields.     

Hydrolytic degradation of POSS-PEG-lactide hybrid hydrogels

A polyhedral oligomeric silsesquioxane (POSS), functionalized with eight arms of poly(ethylene glycol) (PEG; MW 400) and then acrylated, was incorporated into a hydrogel network based on triblock copolymers of poly(lactide-b-ethylene glycol-b-lactide) diacrylates using a redox-initiated polymerization. The organic-inorganic hybrid hydrogels so prepared contained the inorganic crosslinker POSS from 1 to 28 wt.%. The degradation properties of the hydrogels in a pH 7.4 phosphate-buffered saline solution at 37 °C were studied using measurements of mass loss, cryogenic SEM, and ATR-FTIR spectroscopy. It was found that copolymerization of acrylated 1kPEG-lactide with increasing amounts of POSS created a more porous network which was more resistant to hydrolysis. The ATR-FTIR technique was used to monitor the progress of degradation with exposure time through the changes in the carbonyl and C-H deformation bands of the lactide and the Si-C stretching band of the POSS. Increasing POSS incorporation resulted in decreased rate of degradation due to its hydrophobic nature and inertness to hydrolysis. Conversely, an increase in lactide content increased the degradation rate due to the increased number of hydrolytically-sensitive ester groups in the network.     

Synthesis and self-assembly behavior of thermoresponsive poly(oligo(ethylene glycol) methyl ether methacrylate)-POSS with tunable lower critical solution temperature

This article reports on the synthesis of a novel amphiphilic polyhedral oligomeric silsesquioxane (POSS) end-capped poly(2-(2-methoxyethoxy)ethyl methacrylate)-co-oligo(ethylene glycol) methacrylate) (POSS-P(MEO₂MA-co-OEGMA)). These thermoresponsive organic–inorganic hybrid polymers exhibit critical phase transition temperature in water, which can be finely tuned by changing the feed ratio of OEGMA and MEO₂MA. The lower critical solution temperature (LCST) of POSS-P(MEO₂MA-co-OEGMA) increases from 31 to 59 °C with the increasing of OEGMA content. Dynamic light scattering (DLS) and transmission electron microscopy (TEM) studies show that these polymers can self-assemble into spherical micelles with the thermosensitive block into the corona and the POSS forming the core, and larger aggregates are formed when the temperature values are above their LCSTs. These thermoresponsive polymers POSS-P(MEO₂MA-co-OEGMA) with self-assembly behavior and tunable tempetature-responsive property have the potential applications in material science and biotechnology.     

Pure Blue‐Light Emissive Poly(oligofluorenes) with Bifunctional POSS in the Main Chain

Emission of conjugated polymers is known to undergo bathochromic shift from solution to film formation due to π–π stacking in the solid state. In this report, a series of pearl‐necklace‐like hybrid polymers is designed via the hydrosilylation condensation between bifunctional polyhedral oligomeric silsesquioxanes ( B‐POSS ) and oligofluorene segments. Optoelectronic analyses unequivocally show that the presence of these interconnecting B‐POSS can effectively reduce red‐shift in photoluminescence and electroluminescence during film formation. These hybrid poly(oligofluorenes) display stable blue emission with high color purity. Thermal analyses also indicate that they are vitrified polymers with high glass transition temperature (up to 125 °C). We believe that this strategy can be extended to other conjugated systems to control color purity in electroactive materials and holds promise as new emissive materials for various applications.

     

Irreversible temperature‐responsive formation of high‐strength hydrogel from an enantiomeric mixture of starburst triblock copolymers consisting of 8‐arm PEG and PLLA or PDLA

Starburst triblock copolymers consisting of 8‐arm poly(ethylene glycol) (8‐arm PEG) and biodegradable poly(L ‐lactide) (PLLA) or its enantiomer poly(D ‐lactide) (PDLA), 8‐arm PEG‐b‐PLLA‐b‐PEG ( Stri‐L ), and 8‐arm PEG‐b‐PDLA‐b‐PEG ( Stri‐D ) were synthesized. An aqueous solution of a 1:1 mixture ( Stri‐Mix ) of Stri‐L and Stri‐D assumed a sol state at room temperature, but instantaneously formed a physically crosslinked hydrogel in response to increasing temperature. The resulting hydrogel exhibited a high‐storage modulus (9.8 kPa) at 37 °C. Interestingly, once formed at the transition temperature, the hydrogel was stable even after cooling below the transition temperature. The hydrogel formation process was irreversible because of the formation of stable stereocomplexes. In aqueous solution, gradual hydrolytic erosion was observed because of degradation of the hydrogel. The combination of rapid temperature‐triggered irreversible hydrogel formation, high‐mechanical strength, and degradation behavior render this polymer mixture system suitable for use in injectable biomedical materials, for example, as a drug delivery system for bioactive reagents or a biodegradable scaffold for tissue engineering. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6317–6332, 2008     

Adsorption of Poly(ethylene oxide)-Poly(lactide) Copolymers. Effects of Composition and Degradation

The effect of chemical degradation of two diblock copolymers of poly(ethylene oxide) (E) and poly(lactide) (L), E(39)L(5) and E(39)L(20), on their adsorption at silica and methylated silica was investigated with in situ ellipsometry. Steric stablization of polystyrene dispersions was investigated in relation to degradation. Hydrolysis of the poly(lactide) block of the copolymers was followed at different temperatures and pH by using HPLC to measure the occurrence of lactic acid in solution. The block copolymers were quite stable in pH-unadjusted solution at low temperature, whereas degradation was facilitated by increasing temperature or lowering of the pH. Lower degradation rates of E(39)L(20) where observed at low temperature in comparison with those of E(39)L(5), whereas the degradation rates of the copolymers were quantitatively similar at high temperature. The adsorption of the copolymers at methylated silica substrates decreased with increasing degree of degradation due to the reduction in the ability of hydrophobic block to anchor the copolymer layer at the surface. At silica the adsorption initially increased with increasing degradation, particularly for E(39)L(20) due to deposition of aggregates onto the surface. After extensive degradation the adsorption of the copolymers at both silica and methylated silica resembled that of the corresponding poly(ethylene oxide) homopolymer. Overall, it was found that the eventual reduction in adsorption occurred at a lower degree of degradation for E(39)L(5) than for E(39)L(20). Mean-field calculations showed a reduced anchoring for the block copolymers with decreasing poly(lactide) block length at hydrophobic surfaces. In accordance with this finding, it was observed that polystyrene dispersions were stabilized by E(39)L(20) or E(39)L(5) in a way that depended on both the lactide block length and the degree of degradation. Upon degradation of the hydrophobic block, stabilization of the polystyrene dispersions was maintained initially, but eventually degradation resulted in destabilization. The average residual copolymer concentration required for stabilization of the polystyrene dispersions was much higher than the corresponding concentration of intact copolymer required for stabilization. Copyright 2001 Academic Press.     

Transparent polymeric hybrid film of ZnO nanoparticle quantum dots and PMMA with high luminescence and tunable emission color

ZnO nanoparticle quantum dots (QDs)/poly(methyl methacrylate) (PMMA) composites are synthesized by conventional radical polymerization in the presence of 3-(trimethoxysilyl)propylmethacrylate (TPM)-modified ZnO nanoparticle QDs. Although unmodified ZnO nanoparticle QDs were precipitated in tetrahydrofuran (THF) and show only weak emissions under UV irradiation, ZnO nanoparticle QDs/PMMA composite is well dispersed in THF and shows high emissions. TPM acts as the stabilizer and promotes the compatibility between the ZnO nanoparticle QDs and the PMMA matrix. After evaporation of THF from the ZnO nanoparticle QDs/PMMA composite solution, transparent polymeric hybrid films of ZnO nanoparticle QDs and PMMA are obtained. These polymeric hybrid films are characterized by photoluminescence (PL) spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, transmission electron microscopy (TEM), and thermogravimetric analysis. The hybrid film exhibited a high quantum yield and PL emission under ultraviolet excitation. PL emission has been successfully tuned from blue to yellow.     

Facile and quick synthesis of poly(N‐methylolacrylamide)/polyhedral oligomeric silsesquioxane graft copolymer hybrids via frontal polymerization

We report on a new strategy for fabricating well‐defined POSS‐based polymeric materials with and without solvent by frontal polymerization (FP) at ambient pressure. First, we functionalize polyhedral oligomeric silsesquioxane (POSS) with isophorone diisocyanate (IPDI). With these functionalized POSS‐containing isocyanate groups, POSS can be easily incorporated into a poly(N‐methylolacrylamide) (PNMA) matrix via FP in situ. Constant velocity FP is observed without significant bulk polymerization. The morphology and thermal properties of POSS‐based hybrid polymers prepared via FP are comparatively investigated on the basis of scanning electronic microscopy (SEM) and thermogravimetric analysis (TGA). Results show that the as‐prepared POSS‐based polymeric materials exhibit a higher glass transition temperature than that of pure PNMA, ascribing to modified POSS well‐dispersed in these hybrid polymers. Also, the products with different microstructures display different thermal properties. The pure PNMA exhibits a featureless morphology, whereas a hierarchical morphology is obtained for the POSS‐based polymeric materials. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1136–1147, 2009     

Visualization of spontaneous aggregates by diblock poly(styrene)‐b‐poly(L‐lactide)/poly(D‐lactide) pairs in solution with new fluorescent CdSe quantum dot labels

Spontaneous stereocomplex aggregation of diblock poly(styrene)‐b‐poly(L ‐lactide) PS‐b‐PLLA/poly(D ‐lactide) PDLA pairs has been investigated under ambient temperature in tetrahydrofuran solution. First, diblock PS₂₆₀‐b‐PLLA₁₆₅ and PS₂₆₀‐b‐PDLA₁₆₂ bearing similar lengths of respective PLLA and PDLA blocks were synthesized through controlled atom‐transfer radical polymerization of styrene, and a subsequent living ring‐opening polymerization of optically pure lactides, and their structures were further characterized by nuclear magnetic resonance spectroscopy (NMR) and gel‐permeation chromatography (GPC). Subsequently, new enantiomeric poly(D ‐lactide) stabilized core‐shell fluorescent CdSe quantum dots (CdSe/PDLA QD) were designed and prepared as sensitive fluorescence labels to shed new lights on the spontaneous stereocomplex aggregation in THF, which was mediated by stereocomplexation of the PLLA and PDLA chains. Upon simply mixing two individual THF solution of diblock PS₂₆₀‐b‐PLLA₁₆₅ and HO‐PDLA₃₀‐SH, spontaneous stereocomplex aggregation was studied, and the aggregated uniform spherical particles were observed by scanning electronic microscopy (SEM) to exhibit average particle diameters of 2.0 μm. Finally, utilizing the prepared CdSe/PDLA QDs as new fluorescent labels, morphologies of the spontaneous aggregates by new diblock PS₂₆₀‐b‐PLLA₁₆₅/HO‐PDLA₃₀‐SH pair were for the first time directly visualized by a confocal laser scanning fluorescence microscopy (CLSFM). These results might suggest alternative ways to simply prepare functional fluorescent particles with tunable diameter sizes and would be helpful to understand the mechanism of stereocomplex particle aggregation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1393–1405, 2009     

Fluorinated polyimide/POSS hybrid polymers with high solubility and low dielectric constant

A series of fluorinated polyimide/POSS hybrid polymers(FPI-4-FPI-16) were prepared via a facile synthetic route using 2,2'-bis(trifluoromethyl)benzidine, 4,4'-oxydiphthalic dianhydride and monofunctional POSS as starting materials. The hybrid polymers showed excellent solubility and film formation ability. Flexible and robust hybrid films could be conveniently obtained via solution-casting. The hybrid films demonstrated low dielectric constants and high thermal stability. Their dielectric constants were in the range of 2.47–2.92 at 1 MHz measured for their capacitance, and were tunable and decreased with an increase of POSS content. Their 10% weight loss temperatures were in the range of 539-591 ℃ and the weight residual at 800 ℃ ranged from 48% to 53% in nitrogen atmosphere. These hybrid films also possessed good mechanical properties and hydrophobic characteristics. This work could provide a potential strategy for the preparation of fluorinated polyimide/POSS hybrid polymers.     

Aggregation-enhanced emissions of intramolecular excimers in disubstituted polyacetylenes

Whereas chain aggregation commonly quenches light emission of conjugated polymers, we here report a phenomenon of aggregation-induced emission enhancement (AIEE): luminescence of polyacetylenes is dramatically boosted by aggregate formation. Upon photoexcitation, poly(1-phenyl-1-alkyne)s and poly(diphenylacetylene)s emit blue and green lights, respectively, in dilute THF solutions. The polymers become more emissive when their chains are induced to aggregate by adding water into their THF solutions. The polymer emissions are also enhanced by increasing concentration and decreasing temperature. Lifetime measurements reveal that the excited species of the polymers become longer-lived in the aggregates. Conformational simulations suggest that the polymer chains contain n=3 repeat units that facilitate the formation of intramolecular excimers. The AIEE effects of the polymers are rationalized to be caused by the restrictions of their intramolecular rotations by the aggregate formation.     

Effect of POSS on thermomechanical properties of epoxy–POSS nanocomposites

The epoxy–POSS hybrid networks with POSS bound as pendant cages or with untethered POSS dispersed in the matrix were prepared and their structure was controlled. Formation of the hybrid network was followed by chemorheology. In situ development of physical crosslinks in the pregel stage of the network build-up was observed in case of the hybrids with tethered POSS. The complex effect of POSS on mechanical properties is manifested by either increase or decrease in rubbery modulus of different hybrids. This behavior reflects (a) reinforcement due to POSS hard aggregates, (b) diminishing of crosslinking density of the epoxy network by tethered monofunctional POSS and (c) physical crosslinking via POSS domains. Theories of network formation and rubbery elasticity as well as the model of mechanical behavior of particulate composites were applied to interpret the mechanical properties of the hybrids.     

On modulating the self-assembly behaviors of poly(styrene-b-4-vinylpyridine)/octyl gallate blends in solution state via hydrogen bonding from different common solvents

We have investigated the complexation-induced phase behavior of the mixtures of poly(styrene-b-4-vinylpyridine) (PS-b-P4VP) and octyl gallate (OG) due to hydrogen bonding in different solvents. The Fourier transform infrared spectroscopic result indicates that the hydrogen-bonding was formed between the P4VP blocks and OG in both THF and DMF, implying the P4VP blocks can bind to OG. For PS-b-P4VP/OG mixture in chloroform, the morphological transitions were induced from the unimer configuration to swollen aggregate and complex-micelles by adding OG. Interestingly, the complex-micelles can lead the formation of the honeycomb structure from chloroform solution. The PS-b-P4VP/OG mixture in THF, behaving an amphiphilic diblock copolymer in solution state, exhibited a series of morphological transitions from sphere, pearl-necklace-liked rod, worm-liked rod, vesicle, to core-shell-corona aggregates by increasing the OG content. In contrast, the PS-b-P4VP/OG mixture in DMF maintained the unimer configuration upon adding OG. Therefore, the complexation-induced morphology of the mixtures of PS-b-P4VP and OG can be mediated by adopting different common solvents to affect the self-assembly behavior.