Highly effective colorimetric and visual detection of nucleic acids using an asymmetrically split peroxidase DNAzyme

G-quadruplex containing peroxidase DNAzyme is a complex of hemin and a single-stranded guanine-rich DNA (hemin-binding DNA aptamer), which is used as an attractive catalytic label for biosensing recently. Therein, the hemin-binding DNA aptamer contains four GGG repeats and can fold into a G-quadruplex structure. In this paper, we have developed a new split mode to divide the hemin-binding DNA aptamer into two parts: one possesses three GGG repeats, and another part possesses one GGG repeat, namely, the 3:1 split mode. The combination of G-quadruplex and hemin binding could be used as a sensitive probe for the identification of single nucleotide polymorphisms by giving a color signal, visible to the naked eye at room temperature. The G-quadruplex containing peroxidase DNAzyme utilizes the 3:1 split mode and can be directly used for the identification of SNPs with a detection limit in the nM range when the matching length of the probe is short enough. When the matching length of the probe is relatively long, another method adding competition sequences to the probe could also operate effectively for the identification of SNPs. The results also suggested that we could detect the signal when the mutation sample was only 5% in the total target DNA with a competition strategy.     

基于PbS量子点和金纳米颗粒的可卡因适体传感器的研究

本文采用水热法合成了硫化铅量子点,将其与壳聚糖混合后修饰在玻碳电极上,利用PbS与巯基之间的强烈的键和作用,直接将所合成的带巯基的与可卡因适体互补的DNA固定到电极上,将金纳米颗粒标记在可卡因适体作为示踪物检测可卡因,研制了一种新型的用于快速测定可卡因的适体传感器.该适体传感器与不同浓度的可卡因培育时,可卡因适体与可卡...     

Ultrasensitive Detection and Binding Mechanism of Cocaine in an Aptamer‐based Single‐molecule Device

Aptamer serves as a potential candidate for the micro‐detection of cocaine due to its high specificity, high affinity and good stability. Although cocaine aptasensors have been extensively studied, the binding mechanism of cocaine‐aptamer interactions is still unknown, which limits the structural refinement in the design of an aptamer to improve the performance of cocaine aptasensors. Herein, we report a label‐free, ultrasensitive detection of single‐molecule cocaine‐aptamer interaction by using an electrical nanocircuit based on graphene‐molecule‐ graphene single‐molecule junctions (GMG‐SMJs). Real‐time recordings of cocaine‐aptamer interactions have exhibited distinct current oscillations before and after cocaine treatment, revealing the dynamic mechanism of the conformational changes of aptamer upon binding with cocaine. Further concentration‐dependent experiments have proved that these devices can act as a single‐molecule biosensor with at least a limit of detection as low as 1 nmol?L^–1. The method demonstrated in this work provides a novel strategy for shedding light on the interaction mechanism of biomolecules as well as constructing new types of aptasensors toward practical applications.     

Aptamer functionalized microcantilever sensors for cocaine detection

A cocaine-specific aptamer was used as a receptor molecule in a microcantilever-based surface stress sensor for detection of cocaine molecules. An interferometric technique that relies on measuring differential displacement between two microcantilevers (a sensing/reference pair) was utilized to measure the cocaine/aptamer binding induced surface stress changes. Sensing experiments were performed for different concentrations of cocaine from 25 to 500 μM in order to determine the sensor response as a function of cocaine concentration. In the lower concentration range from 25 to 100 μM, surface stress values increased proportionally to coverage of aptamer/cocaine complexes from 11 to 26 mN/m. However, as the cocaine concentration was increased beyond 100 μM, the surface stress values demonstrated a weaker dependence on the affinity complex surface coverage. On the basis of a sensitivity of 3 mN/m for the surface stress measurement, the lowest detectable threshold for the cocaine concentration is estimated to be 5 μM. Sensing cantilevers could be regenerated and reused because of reversible thermal denaturation of aptamer.     

聚集诱导发光分子/适配体/外切酶Ⅰ体系对可卡因的检测

目前非法药物的滥用已经成为全球性的公共安全卫生问题之一[1~3].其中可卡因作为一种全球禁用的非法药物,长期滥用会对人体造成许多不良的影响,如精神疾病、失眠、抑郁和暴力倾向等,甚至威胁生命,同时,吸食可卡因还会导致出现各种社会问题[4,5].因此实现对可卡因的快速检测成为打击毒品犯罪、维护社会稳定的关键.目前对于可卡因的检测主要采用气相色谱/质谱(GC/MS)和液相色谱/质谱(LC/MS)等大型仪器.虽然能够实现对可卡因检测,但大多需要专业人员操作且耗时较长,因此开发一种简便、高效且可靠的可卡因检测方法成为研究的热点[6~8].其中,基于荧光探针的检测手段由于具有高效、灵敏及便捷等优势而备受关注,但传统的荧光探针面临聚集导致发光猝灭(ACQ)的难题[9,10],即这类分子在溶液中发光非常强,一旦聚集或在固体中发光显著减弱,非常不利于实际应用.     

A new aptameric biosensor for cocaine based on surface-enhanced Raman scattering spectroscopy

The present study reports the proof of principle of a reagentless aptameric sensor based on surface-enhanced Raman scattering (SERS) spectroscopy with "signal-on" architecture using a model target of cocaine. This new aptameric sensor is based on the conformational change of the surface-tethered aptamer on a binding target that draws a certain Raman reporter in close proximity to the SERS substrate, thereby increasing the Raman scattering signal due to the local enhancement effect of SERS. To improve the response performance, the sensor is fabricated from a cocaine-templated mixed self-assembly of a 3'-terminal tetramethylrhodamine (TMR)-labeled DNA aptamer on a silver colloid film by means of an alkanethiol moiety at the 5' end. This immobilization strategy optimizes the orientation of the aptamer on the surface and facilitates the folding on the binding target. Under optimized assay conditions, one can determine cocaine at a concentration of 1 muM, which compares favorably with analogous aptameric sensors based on electrochemical and fluorescence techniques. The sensor can be readily regenerated by being washed with a buffer. These results suggest that the SERS-based transducer might create a new dimension for future development of aptameric sensors for sensitive determination in biochemical and biomedical studies.     

Structure-switching signaling aptamers

Aptamers are single-stranded nucleic acids with defined tertiary structures for selective binding to target molecules. Aptamers are also able to bind a complementary DNA sequence to form a duplex structure. In this report, we describe a strategy for designing aptamer-based fluorescent reporters that function by switching structures from DNA/DNA duplex to DNA/target complex. The duplex is formed between a fluorophore-labeled DNA aptamer and a small oligonucleotide modified with a quenching moiety (denoted QDNA). When the target is absent, the aptamer binds to QDNA, bringing the fluorophore and the quencher into close proximity for maximum fluorescence quenching. When the target is introduced, the aptamer prefers to form the aptamer-target complex. The switch of the binding partners for the aptamer occurs in conjunction with the generation of a strong fluorescence signal owing to the dissociation of QDNA. Herein, we report on the preparation of several structure-switching reporters from two existing DNA aptamers. Our design strategy is easy to generalize for any aptamer without prior knowledge of its secondary or tertiary structure, and should be suited for the development of aptamer-based reporters for real-time sensing applications.     

Rapid detection of a cocaine-binding aptamer using biological nanopores on a chip

This paper describes a methodology for the rapid and highly selective detection of cocaine using a membrane protein channel combined with a DNA aptamer. The DNA aptamer recognizes the cocaine molecule with high selectivity. We successfully detected a low concentration of cocaine (300 ng/mL, the drug test cutoff limit) within 60 s using a biological nanopore embedded in a microchip.     

A selective adenosine sensor derived from a triplex DNA aptamer

The aim of this study is to develop a selective adenosine aptamer sensor using a rational approach. Unlike traditional RNA aptamers developed from SELEX, duplex DNA containing an abasic site can function as a general scaffold to rationally design aptamers for small aromatic molecules. We discovered that abasic site-containing triplex DNA can also function as an aptamer and provide better affinity than duplex DNA aptamers. A novel adenosine aptamer sensor was designed using such a triplex. The aptamer is modified with furano-dU in the binding site to sense the binding. The sensor bound adenosine has a dissociation constant of 400 nM, more than tenfold stronger than the adenosine aptamer developed from SELEX. The binding quenched furano-dU fluorescence by 40%. It was also demonstrated in this study that this sensor is selective for adenosine over uridine, cytidine, guanosine, ATP, and AMP. The detection limit of this sensor is about 50 nM. The sensor can be used to quantify adenosine concentrations between 50 nM and 2 μM.     

Kinetic capillary electrophoresis-based affinity screening of aptamer clones

DNA aptamers are single stranded DNA (ssDNA) molecules artificially selected from random-sequence DNA libraries for their specific binding to a certain target. DNA aptamers have a number of advantages over antibodies and promise to replace them in both diagnostic and therapeutic applications. The development of DNA aptamers involves three major stages: library enrichment, obtaining individual DNA clones, and the affinity screening of the clones. The purpose of the screening is to obtain the nucleotide sequences of aptamers and the binding parameters of their interaction with the target. Highly efficient approaches have been recently developed for the first two stages, while the third stage remained the rate-limiting one. Here, we introduce a new method for affinity screening of individual DNA aptamer clones. The proposed method amalgamates: (i) aptamer amplification by asymmetric PCR (PCR with a primer ratio different from unity), (ii) analysis of aptamer-target interaction, combining in-capillary mixing of reactants by transverse diffusion of laminar flow profiles (TDLFP) and affinity analysis using kinetic capillary electrophoresis (KCE), and (iii) sequencing of only aptamers with satisfying binding parameters. For the first time we showed that aptamer clones can be directly used in TDLFP/KCE-based affinity analysis without an additional purification step after asymmetric PCR amplification. We also demonstrated that mathematical modeling of TDLFP-based mixing allows for the determination of K_d values for the in-capillary reaction of an aptamer and a target and that the obtained K_d values can be used for the accurate affinity ranking of aptamers. The proposed method does not require the knowledge of aptamer sequences before screening, avoids lengthy (3-5 h) purification steps of aptamer clones, and minimizes reagent consumption to nanoliters.     

Structure-switching signaling aptamers: transducing molecular recognition into fluorescence signaling

The development of aptamer technology considerably broadens the utility of nucleic acids as molecular recognition elements, because it allows the creation of DNA or RNA molecules for binding a wide variety of analytes (targets) with high affinity and specificity. Several recent studies have focused on developing rational design strategies for transducing aptamer-target recognition events into easily detectable signals, so that aptamers can be widely exploited for detection directed applications. We have devised a generalizable strategy for designing nonfluorescent aptamers that can be turned into fluorescence-signaling reporters. The resultant signaling probes are denoted "structure-switching signaling aptamers" as they report target binding by switching structures from DNA/DNA duplex to DNA/target complex. The duplex is formed between a fluorophore-labeled DNA aptamer and an antisense DNA oligonucleotide modified with a quencher (denoted QDNA). In the absence of the target, the aptamer hybridizes with QDNA, bringing the fluorophore into close proximity of the quencher for efficient fluorescence quenching. When this system is exposed to the target, the aptamer switches its binding partner from QDNA to the target. This structure-switching event is coupled to the generation of a fluorescent signal through the departure of QDNA, permitting the real-time monitoring of the aptamer-target recognition. In this article, we discuss the conceptual framework of the structure-switching approach, the essential features of structure-switching signaling aptamers as well as remaining challenges and possible solutions associated with this new methodology.     

Biomimetic sensing based on chemically induced assembly of a signaling DNA aptamer on a fluid bilayer membrane

The adenosine aptamer was split into two halves and linked to a fluid liposome surface; addition of adenosine resulted in aptamer assembly, which did not occur if the split aptamer was attached to silica nanoparticles, demonstrating the feasibility of using aptamer probes to study diffusion within lipid membranes.     

Aptamer based fluorescent cocaine assay based on the use of graphene oxide and exonuclease III-assisted signal amplification

The article reports an aptamer based assay for cocaine by employing graphene oxide and exonuclease III-assisted signal amplification. It is based on the following scheme and experimental steps: (1) Exo III can digest dsDNA with blunt or recessed 3-terminus, but it has limited activity to ssDNA or dsDNA with protruding 3-terminus; (2) GO can absorb the FAM-labeled ssDNA probe and quench the fluorescence of probe, while the affinity between FAM-labeled mononucleotide and GO is negligible; (3) Cocaine aptamer can be split into two flexible ssDNA pieces (Probe 1 and Probe 2) without significant perturbation of cocaine-binding abilities; (4) The triple complex consisting of Probe 1, Probe 2 and cocaine can be digested by Exo III with the similar efficiency as normal dsDNA. Cocaine aptamer is split into two flexible ssDNA pieces (Probe 2 and 3′-FAM-labeled Probe 1). Cocaine can mediate the cocaine aptamer fragments forming a triplex. The triple complex has unique characteristic with 3′-FAM-labeled blunt end at the Probe 1 and 3′-overhang end at Probe 2. If exonuclease III is added, it will catalyze the stepwise removal of fluorescein (FAM) labeled mononucleotides from the 3-hydroxy termini of the special triplex complex, resulting in liberation of cocaine. The cocaine released in this step can produce a new cleavage cycle, thereby leading to target recycling. Through such a cyclic bound-hydrolysis process, small amounts of cocaine can induce the cleavage of a large number of FAM-labeled probe 1. The cleaved FAM-labeled mononucleotides are not adsorbed on the surface of graphene oxide (GO), so a strong fluorescence signal enhancement is observed as the cocaine triggers enzymatic digestion. Under optimized conditions, the assay allows cocaine to be detected in the 1 to 500 nM concentration range with a detection limit of 0.1 nM. The method was applied to the determination of cocaine in spiked human plasma, with recoveries ranging from 92.0 to 111.8 % and RSD of <12.8 %.

Open image in new window

Graphical abstract Aptamer based fluorescent cocaine assay based on graphene oxide and exonuclease III-assisted signal amplification

     

KF polymerase-based fluorescence aptasensor for the label-free adenosine detection

We have developed a simple, inexpensive, and label-free method for the selective detection of adenosine. Klenow fragment polymerase (KF polymerase) is a commonly-used 5' to 3' DNA polymerase, it also has 3' to 5' exonuclease activity that can digest single-stranded DNA. An adenosine binding DNA aptamer was employed, the aptamer was split into two pieces of single-stranded DNA (aptamer-A1 + aptamer-A2). Without the addition of adenosine, aptamer-A1 and aptamer-A2 existed as single-stranded DNA which could be efficiently degraded by the exonuclease activity of KF polymerase. Much reduced background fluorescence was obtained when SYBR Green dye was added. However, in the presence of adenosine, aptamer-A1 and aptamer-A2 bound to adenosine, and hybridization of the complementary sequences resulted in the formation of a duplex DNA structure, which could initiate DNA polymerization. The addition of SYBR Green dye resulted in a very high fluorescence enhancement, which could be used for the quantification of adenosine.     

非标记夹心式电化学可卡因适体传感器的研究

设计一种基于双链核酸适体的非标记夹心式电化学适体传感器, 建立简单、高灵敏度的可卡因分析方法. 首先将末端巯基修饰的捕获适体探针组装在金电极表面, 构建可卡因适体传感器. 该传感器与目标分子可卡因和部分互补的检测适体探针作用后, 在电极表面形成适体/可卡因/适体复合物. 以六氨合钌为信号分子, 基于单链适体和适体/可卡因/适体复合物对六氨合钌吸附量的不同, 通过计时电量法检测电极表面吸附六氨合钌的还原电量, 进行可卡因的分析检测. 在优化的条件下, 还原电量与可卡因浓度在1～50 mmol/L范围内呈良好的线性关系, 检出限为0.1 mmol/L. 用于血清中可卡因的检测, 回收率为96.4%～104%. 该方法简单, 灵敏度高, 可作为一种通用型的适体传感器模型.     

Structure-switching allosteric deoxyribozymes

DNA aptamers and DNA enzymes (DNAzymes or deoxyribozymes) are single-stranded DNA molecules with ligand-binding and catalytic capabilities, respectively. Allosteric DNA enzymes (aptazymes) are deoxyribozymes whose activity can be regulated by the binding state of an appended aptamer domain and have many potential uses in the fields of drug discovery and diagnostics. In this report, we describe a simple, yet potentially general, DNA aptazyme rational design strategy that requires no structural characterization of the constituent deoxyribozymes and aptamers. It is based on the concept originally developed in our laboratory for the design of structure-switching signaling aptamers that change structural states from a DNA-DNA duplex to a DNA-target complex upon target binding. In our new strategy, an antisense oligonucleotide is used to regulate the enzymatic activity of a linked aptamer-deoxyribozyme by annealing with a stretch of nucleotides on each side of the aptamer-DNAzyme junction. Structural reorganization of the aptamer domain upon target binding relieves the suppressive effect of this regulatory oligonucleotide on the attached DNA enzyme. Consequently, the target-binding event triggers the catalytic action of the aptazyme. We have demonstrated this concept using two RNA-cleaving deoxyribozymes, each adjoined to a DNA aptamer that binds ATP. These allosteric DNA enzymes exhibit the same ligand-binding specificity as the parental DNA aptamer and show up to 30-fold rate enhancement in the presence of ATP. The described methodology provides a convenient approach for rationally designing catalytic DNA-based biosensors.     

Single-nucleotide-specific PNA-peptide ligation on synthetic and PCR DNA templates

DNA-directed chemical synthesis has matured into a useful tool with applications such as fabrication of defined (nano)molecular architectures, evolution of amplifiable small-molecule libraries, and nucleic acid detection. Most commonly, chemical methods were used to join oligonucleotides under the control of a DNA or RNA template. The full potential of chemical ligation reactions can be uncovered when nonnatural oligonucleotide analogues that can provide new opportunities such as increased stability, DNA affinity, hybridization selectivity, and/or ease and accuracy of detection are employed. It is shown that peptide nucleic acid (PNA) conjugates, nonionic biostable DNA analogues, allowed the fashioning of highly chemoselective and sequence-selective peptide ligation methods. In particular, PNA-mediated native chemical ligations proceed with sequence selectivities and ligation rates that reach those of ligase-catalyzed oligodeoxynucleotide reactions. Usually, sequence-specific ligations can only be achieved by employing short-length probes, which show DNA affinities that are too low to allow stable binding to target segments in large, double-stranded DNA. It is demonstrated that the PNA-based ligation chemistry allowed the development of a homogeneous system in which rapid single-base mutation analyses can be performed even on double-stranded PCR DNA templates.     

G-Quadruplex-based DNAzyme for colorimetric detection of cocaine: using magnetic nanoparticles as the separation and amplification element

The appearance of the aptamer provides good recognition elements for small molecules, especially for drugs. In this work, by combining the advantages of magnetic nanoparticles (MNPs) with colorimetric drug detection using hemin-G-quadruplex complex as the sensing element, we report a simple and sensitive DNAzyme-based colorimetric sensor for cocaine detection in a 3,3,5,5-tetramethylbenzidine sulfate (TMB)-H(2)O(2) reaction system. The whole experimental processes are simplified. Cocaine aptamer fragments, SH-C2, are covalently labeled onto the amine-functionalized MNPs. When the target cocaine and another cocaine aptamer fragments (C1) grafted with G-riched strand AG4 (i.e. C1-AG4) are present simultaneously, the C2 layer on MNPs hybridizes partly with C1-AG4 to bind the cocaine. The C1-AG4 can be combinded with hemin to form DNAzyme which can effectively catalyze the H(2)O(2)-mediated oxidation of TMB, giving rise to a change in solution color. Importantly, using MNPs as the separation and amplification elements could effectively reduce the background signal and the interference from the real samples. A linear response from 0.1 μM to 20 μM is obtained for cocaine and a detection limit of 50 nM is achieved, which provides high sensitivity and selectivity to detect cocaine.     

A G‐Quadruplex/Hemin Complex with Switchable Peroxidase Activity by DNA Hybridization

A hemin‐binding DNA G‐quadruplex (also known as a hemin aptamer or DNAzyme) has been previously reported to be able to enhance the peroxidase activity of hemin. In this work, we described a DNAzyme structure that had an effector‐recognizing part appearing as a single stranded DNA linkage flanked by two split G‐quadruplex halves. Hybridization of the single stranded part in the enzyme with a perfectly matched DNA strand (effector) formed a rigid DNA duplex between the two G‐quadruplex halves and thus efficiently suppressed the enzymatic activity of the G‐quadruplex/hemin complex, while the mismatched effector strand was not able to regulate the peroxidase activity effectively. With 2,2′‐azinobis(3‐ethylbenzthiazoline)‐6‐sulfonic acid (ABTS) as an oxidizable substrate, we were able to characterize the formation of the re‐engineered G‐quadruplex/hemin complex and verify its switchable peroxidase activity. Our results show that the split G‐quadruplex is an especially useful module to design low‐cost and label‐free sensors toward various biologically or environmentally interesting targets.     

An Aptamer‐Nanotrain Assembled from Six‐Letter DNA Delivers Doxorubicin Selectively to Liver Cancer Cells

Expanding the number of nucleotides in DNA increases the information density of functional DNA molecules, creating nanoassemblies that cannot be invaded by natural DNA/RNA in complex biological systems. Here, we show how six‐letter GACTZP DNA contributes this property in two parts of a nanoassembly: 1) in an aptamer evolved from a six‐letter DNA library to selectively bind liver cancer cells; and 2) in a six‐letter self‐assembling GACTZP nanotrain that carries the drug doxorubicin. The aptamer‐nanotrain assembly, charged with doxorubicin, selectively kills liver cancer cells in culture, as the selectivity of the aptamer binding directs doxorubicin into the aptamer‐targeted cells. The assembly does not kill untransformed cells that the aptamer does not bind. This architecture, built with an expanded genetic alphabet, is reminiscent of antibodies conjugated to drugs, which presumably act by this mechanism as well, but with the antibody replaced by an aptamer.