Development of an Efficient Procedure for Determination of Copper,Zinc and Iron after Solid Phase Extraction on 3‐(1‐(1‐H‐Indol‐3‐yl)‐3‐Phenylallyl)‐1H‐Indole Loaded on Duolite XAD 761

A method for the simultaneous preconcentration of Cu²⁺,Zn²⁺ and Fe³⁺ ions, in some food samples has been reported. The method is based on the adsorption of 3‐(1‐(1‐H‐indol‐3‐yl)‐3‐phenylallyl)‐1H‐indole (IPAI) loaded on Duolite XAD 761. The metal ions adsorbed on the modified solid phase resin are eluted using 6 mL of 4 mol L^?1 nitric acid. The influences of the analytical parameters including pH and amount of ligand and solid phase and type and amount of surfactant and sample volume on the metal ions recoveries were investigated. The effects of matrix ions on the retentions of the analytes were also examined. The recoveries of analytes were generally higher than 95% with a RSD lower than 5%. The method has been successfully applied for these metals content evaluation in some real samples.     

Solid phase extraction of heavy metals on chemically modified silica-gel with 2-(3-silylpropylimino) methyl)-5-bromophenol in food samples

Trace amounts of Fe³⁺, Pb²⁺, Cu²⁺, Ni²⁺, Co²⁺ and Zn²⁺ ions were efficiently enriched following complexation with silica-gel chemically functionalized with 2-((3-silylpropylimino)methyl)-5-bromophenol. The enriched metal ions efficiently eluted with 6?mL of 4.0?mol?L^?1 nitric acid and their metal contents were determined by flame atomic absorption spectrometry (FAAS). The influences of the analytical parameters and experimental variables on the recoveries of the metal ions under study were investigated and optimized. The method has high sorption preconcentration efficiency even in the presence of various interfering ions. At optimum values of all variables the method is applicable for analysis of real samples with recoveries in the range of 95 to 105% with RSD lower than 4.2% and detection limits between 1.4 and 2.8?µg?L^?1.     

Simultaneous determination of zinc and copper(II) with 1-(2-pyridylazo)2-naphthol in micellar media by spectrophotometric H-point standard addition method

The H-point standard addition method (HPSAM) was applied to handling spectrophotometric data for simultaneous determination of Zn²⁺ and Cu²⁺ or selective determination of Zn²⁺ in the presence of Cu²⁺. The ligand 1-(2-pyridylazo)2-naphthol (PAN) and its metal complexes (Zn-PAN and Cu(II)-PAN) were made water-soluble by the neutral surfactant Triton X-100, and therefore, no extraction with organic solvents was required. The method is based on the difference in absorbance of formed complexes between Zn²⁺ and PAN, at two different wavelengths at pH = 9.2. The formation of both the complexes was complete within five minutes. Zn²⁺ can be determined in the range of 0.2–25 μg/mL with satisfactory accuracy and precision in the presence of excess of Cu²⁺ and most other metal ions. Interference effects of common anions and cations were studied. Under working conditions, the proposed method was successfully applied to the simultaneous determination of Zn²⁺ and Cu²⁺ in several real and synthetic mixtures with different concentration ratio of Zn²⁺ and Cu²⁺. The text was submitted by the authors in English.     

Metal‐Ion‐Mediated Tuning of Duplex DNA Binding by Bis(2‐(2‐pyridyl)‐1H‐benzimidazole)

Studies of double‐stranded‐DNA binding have been performed with three isomeric bis(2‐(n‐pyridyl)‐1H‐benzimidazole)s (n=2, 3, 4). Like the well‐known Hoechst 33258, which is a bisbenzimidazole compound, these three isomers bind to the minor groove of duplex DNA. DNA binding by the three isomers was investigated in the presence of the divalent metal ions Mg²⁺, Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺. Ligand–DNA interactions were probed with fluorescence and circular dichroism spectroscopy. These studies revealed that the binding of the 2‐pyridyl derivative to DNA is dramatically reduced in the presence of Co²⁺, Ni²⁺, and Cu²⁺ ions and is abolished completely at a ligand/metal‐cation ratio of 1:1. Control experiments done with the isomeric 3‐ and 4‐pyridyl derivatives showed that their binding to DNA is unaffected by the aforementioned transition‐metal ions. The ability of 2‐(2‐pyridyl)benzimidazole to chelate metal ions and the conformational changes of the ligand associated with ion chelation probably led to such unusual binding results for the ortho isomer. The addition of ethylenediaminetetraacetic acid (EDTA) reversed the effects completely.     

Syntheses,structures of N‐(substituted)‐2‐aza‐[3]‐ferrocenophanes and their application as redox sensor for Cu2+ ion

Rigid N‐(substituted)‐2‐aza‐[3]‐ferrocenophanes L1 and L2 were easily synthesized from 1,1 ‐dicarboxyaldehydeferrocene and the corresponding amines. Ligands L1 and L2 were characterized by ¹H NMR, ¹³C NMR and single‐crystal X‐ray crystallography. The coordination abilities of L1 and L2 with metal ions such as Cu²⁺, Mg²⁺, Ni²⁺, Zn²⁺, Pb²⁺ and Cd²⁺ were evaluated by cyclic voltammetry. The electrochemical shift (ΔE_1/2) of 125 mV was observed in the presence of Cu²⁺ ion, while no significant shift of the Fc/Fc + couple was observed when Mg²⁺, Ni²⁺, Zn²⁺, Pb²⁺, Cd²⁺ metal ions were added to the solution of L1 in the mixture of MeOH and H₂O. Moreover, the extent of the anodic shift of redox potentials was approximately equal to that induced by Cu²⁺ alone when a mixture of Cu²⁺, Mg²⁺, Ni²⁺, Zn²⁺, Pb²⁺ and Cd²⁺ was added to a solution of L1. Ligand L1 was proved to selectively sense Cu²⁺ in the presence of large, excessive first‐row transition and late‐transition metal cations. The coordination model was proposed from the results of controlled experiments and quantum calculations. Copyright © 2012 John Wiley & Sons, Ltd.     

All Solid State Chromium(III) Selective Potentiometric Sensor Based on 2‐(1‐(2‐((3‐(2‐Hydroxyphenyl)‐1H‐pyrozol‐1‐yl)methyl)benzyl)‐1H‐pyrazol‐3‐yl)phenol

Highly selective all solid state electrochemical sensor based on a synthesized compound i.e. 2‐(1‐(2‐((3‐(2‐hydroxyphenyl)‐1H‐pyrozol‐1‐yl)methyl)benzyl)‐1H‐pyrazol‐3‐yl)phenol (I) as an ionophore has been prepared and investigated for the selective quantification of chromium(III) ions. The effect of various plasticizers, viz. dibutyl phosphonate (DBP), dibutyl(butyl) phosphonate (DBBP), nitrophenyl octyl ether (NPOE), tris‐(2‐ethylhexyl)phosphonate (TEP), tri‐butyl phosphonate (TBP), dioctyl phthalate (DOP), dioctyl sebacate (DOS), benzyl acetate (BA) and acetophenone (AP) along with anion excluders NaTPB (sodium tetraphenyl borate) and KClTPB (potassium(tetrakis‐4‐chlorophenyl)borate was also studied. The optimum composition of the best performing membrane contained (I):KClTPB:NPOE:PVC in the ratio 15 : 3 : 40 : 42 w/w. The sensor exhibited near Nernstian slope of 20.1±0.2 mV/decade of activity in the working concentration range of 1.2×10^?7–1.0×10^?1 M, and in a pH range of 3.8–4.5. The sensor exhibited a fast response time of 10 s and could be used for about 5 months without any considerable divergence in potentials. The proposed sensor showed very good selectivity over most of the common cations including Na⁺, Li⁺, K⁺, Cu²⁺, Sr²⁺, Ni²⁺, Co²⁺, Ba²⁺, Hg²⁺, Pb²⁺, Zn²⁺, Cs⁺, Mg²⁺, Cd²⁺, Al³⁺, Fe³⁺and La³⁺. The activity of Cr(III) ions was successfully determined in the industrial waste samples by using this sensor.     

Magnetocaloric Properties of Heterometallic 3d–Gd Complexes Based on the [Gd(oda)3]3− Metalloligand

A series of heterometallic 3d–Gd³⁺ complexes based on a lanthanide metalloligand, [M(H₂O)₆][Gd(oda)₃] ? 3 H₂O [M=Cr³⁺ ( 1‐Cr )] (H₂oda=2,2′‐oxydiacetic acid), [M(H₂O)₆][MGd(oda)₃]₂ ? 3 H₂O [M=Mn²⁺ ( 2‐Mn ), Fe²⁺ ( 2‐Fe ) and Co²⁺ ( 2‐Co )], and [M₃Gd₂(oda)₆(H₂O)₆] ? 12 H₂O [M=Ni²⁺ ( 3‐Ni ), Cu²⁺ ( 3‐Cu ), and Zn²⁺ ( 3‐Zn )], are reported. Magnetic and heat‐capacity studies revealed a significant impact on the magnetocaloric effect depending on the anisotropy of the 3d transition metal ions, as confirmed by comparison of the observed maximum values of ?ΔS_m between complexes 2‐Co and 1‐Cr . In these two complexes, the 3d metal ions have the same spin (S=3/2 for Co²⁺ and Cr³⁺ ions), and the theoretical calculation suggested a larger ?ΔS_m value for 2‐Co (47.8 J K^?1 kg^?1) than 1‐Cr (37.5 J K^?1 kg^?1); however, the significant anisotropy of Co²⁺ ions in 2‐Co , which can result in smaller effective spins, gives a smaller value of ?ΔS_m for 2‐Co (32.2 J K^?1 kg^?1) than for 1‐Cr (35.4 J K^?1 kg^?1) at ΔH=9 T.     

Application of Cloud Point Extraction for Copper,Nickel, Zinc and Iron Ions in Environmental Samples

A cloud point extraction procedure was presented for the preconcentration of copper, nickel, zinc and iron ions in various samples. After complexation by 2‐(6‐(1H‐benzo[d]imidazol‐2‐yl)pyridin‐2‐yl)‐1H‐benzo[d]Imidazole (BIYPYBI), analyte ions are quantitatively extracted in Triton X‐114 following centrifugation. 1.0 mol L^?1 HNO₃ nitric acid in methanol was added to the surfactant‐rich phase prior to its analysis by flame atomic absorption spectrometry (FAAS). The adopted concentrations for BIYPYBI, Triton X‐114 and HNO₃ and bath temperature, centrifuge rate and time were optimized. Detection limits for Cu²⁺, Fe³⁺, Zn²⁺ and Ni²⁺ ions was 1.4, 2.2, 1.0 and 1.9 ng mL^?1, respectively. The preconcentration factors for all ions was 30, while the enrichment factor of Cu²⁺, Fe³⁺, Zn²⁺ and Ni²⁺ ions was 35, 25, 39 and 30, respectively. The proposed procedure was applied to the analysis of real samples.     

Rational Construction of Polymeric Cadmium(II) Benzimidazole for Transition Metal Ion Exchange

A 1D double‐helical coordination polymer {[Cd(pbbm)₂]₂(ClO₄)₄(H₂O)₂}_n ( 1 ) was successfully constructed by the reaction of Cd(ClO₄)₂ · 6H₂O with 1,1′‐(1,5‐pentanediyl)bis‐1H‐benzimidazole (pbbm). Interestingly, polymer 1 exhibits highly selective capacity for the ionic exchange of Zn²⁺ and Cu²⁺ over Co²⁺ and Ni²⁺ ions in the crystalline solid state when the crystals of 1 are immersed in the aqueous solutions of the perchlorate salts of Cu²⁺, Zn²⁺, Co²⁺, and Ni²⁺ ions, respectively, which indicates that central Cd^II ion exchange might be considered as being dominated by the coordination ability of metal ions to free functional groups, ionic radii of exchanged metal ions, and the solution concentration of adsorbed metal salts. The parent material‐ and ion‐exchange‐induced products are identified by FT‐IR spectroscopy, PXRD patterns as well as SEM and EDS measurements. In addition, the thermal stability of 1 was also investigated.     

Silver nanoparticle loaded on activated carbon and activated carbon modified with 2-(4-isopropylbenzylideneamino)thiophenol (IPBATP) as new sorbents for trace metal ions enrichment

The efficiencies and performances of silver nanoparticle loaded activated carbon modified with 2-(4-isopropylbenzylideneamino)thiophenol (IPBATP-Ag-NP-AC) and activated carbon modified with IPBATP (IPBATP-AC), as new sorbents, were evaluated for separation and preconcentration of Cu²⁺, Zn²⁺, Co²⁺, Cd²⁺ and Pb²⁺ ions from real environmental samples. The retained metals content was reversibly eluted using 5?mL of CH₃COOH (6.0?mol?L^?1) and/or 10?mL of 4.0?mol?L^?1 HNO₃ for IPBATP-Ag-NP-AC and IPBATP-AC, respectively. The experimental parameters influence the recoveries of metal ions including pH, amounts of ligand and supports, condition of eluents, sample and eluent flow rates of has been investigated. The preconcentration factors were found to be 100 for Zn²⁺, Cd²⁺, Co²⁺, Cu²⁺ and 50 for Pb²⁺ ions using IPBATP-Ag-NP-AC, and 50 for Zn²⁺, Cd²⁺, Co²⁺, Cu²⁺ and 25 for Pb²⁺ ions using IPBATP-AC. The detection limit of both SPE-based sorbents was between 1.6–2.5?ng?mL^?1 for IPBATP-AC and 1.3–2.5?ng?mL^?1 for IPBATP-Ag-NP-AC. The proposed methods have been successfully applied for the extraction and determination of the understudy metal ions content in some real samples with extraction efficiencies higher than 90% and relative standard deviations (RSD) lower than 2.4%.     

A coordinatively flexible hexadentate ligand gives structurally isomeric complexes M2(L)X3 (M = Cu,Zn; X = Br,Cl)

Polypyridyl multidentate ligands based on ethylenediamine backbones are important metal‐binding agents with applications in biomimetics and homogeneous catalysis. The seemingly hexadentate tpena ligand [systematic name: N,N,N′‐tris(pyridin‐2‐ylmethyl)ethylenediamine‐N′‐acetate] reacts with zinc chloride and zinc bromide to form trichlorido[μ‐N,N,N′‐tris(pyridin‐2‐ylmethyl)ethylenediamine‐N′‐acetato]dizinc(II), [Zn₂(C₂₂H₂₄N₅O₂)Cl₃], and tribromido[μ‐N,N,N′‐tris(pyridin‐2‐ylmethyl)ethylenediamine‐N′‐acetato]dizinc(II), [Zn₂Br₃(C₂₂H₂₄N₅O₂)]. One Zn^II ion shows the anticipated N₅O coordination in an irregular six‐coordinate site and is linked by an anti carboxylate bridge to a tetrahedral ZnX₃ (X = Cl or Br) unit. In contrast, the Cu^II ions in aquatribromido[μ‐N,N,N′‐tris(pyridin‐2‐ylmethyl)ethylenediamine‐N′‐acetato]dicopper(II)–tribromido[μ‐N,N,N′‐tris(pyridin‐2‐ylmethyl)ethylenediamine‐N′‐acetato]dicopper(II)–water (1/1/6.5) [Cu₂Br₃(C₂₂H₂₄N₅O₂)][Cu₂Br₃(C₂₂H₂₄N₅O₂)(H₂O)]·6.5H₂O, occupy two tpena‐chelated sites, one a trigonal bipyramidal N₃Cl₂ site and the other a square‐planar N₂OCl site. In all three cases, electrospray ionization mass spectra were dominated by a misleading ion assignable to [M(tpena)]⁺ (M = Zn²⁺ and Cu²⁺).     

Co(II), Ni(II), Cu(II) and Zn(II) complexes of aminothiazole‐derived Schiff base ligands: Synthesis,characterization, antibacterial and cytotoxicity evaluation,bovine serum albumin binding and density functional theory studies

Transition metal complexes of type M(L)₂(H₂O)_x were synthesized, where L is deprotonated Schiff base 2,4‐dihalo‐6‐(substituted thiazol‐2‐ylimino)methylphenol derived from the condensation of aminothiazole or its derivatives with 2‐hydroxy‐3‐halobenzaldehyde and M = Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺ (x = 0 for Cu²⁺ and Zn²⁺; x = 2 for Co²⁺ and Ni²⁺). The synthesized Schiff bases and their metal complexes were thoroughly characterized using infrared, ¹H NMR, electronic and electron paramagnetic resonance spectroscopies, elemental analysis, molar conductance and magnetic susceptibility measurements, thermogravimetric analysis and scanning electron microscopy. The results reveal that the bidentate ligands form complexes having octahedral geometry around Co²⁺ and Ni²⁺ metal ions while the geometry around Cu²⁺ and Zn²⁺ metal ions is four‐coordinated. The geometries of newly synthesized Schiff bases and their metal complexes were fully optimized in Gaussian 09 using 6–31 + g(d,p) basis set. Fluorescence quenching data reveal that Zn(II) and Cu(II) complexes bind more strongly to bovine serum albumin in comparison to Co(II) and Ni(II) complexes. The ligands and their complexes were evaluated for in vitro antibacterial activity against Escherichia coli ATCC 25922 (Gram negative) and Staphylococcus aureus ATCC 29213 (Gram positive) and cytotoxicity against lever hepatocellular cell line HepG2.     

A Bifunctional Luminescent Metal–Organic Framework for the Sensing of Paraquat and Fe3+ Ions in Water

The hydrothermal reaction of Zn²⁺ ions with a mixture of two ligands, Hcptpy and H₃btc (Hcptpy=4‐(4‐carboxyphenyl)‐2,2′:4′,4′′‐terpyridine; H₃btc=1,3,5‐benzenetricarboxylic acid), led to the formation of a 3D metal–organic framework (MOF) with 1D channels, [Zn₂(cptpy)(btc)(H₂O)]_n ( 1 ), which was structurally characterized by using single‐crystal X‐ray diffraction (SXRD). In MOF 1 , two independent Zn²⁺ ions were interconnected by btc^3? ligands to form a 1D chain, whilst adjacent Zn²⁺ ions were alternately bridged by cptpy^? ligands to generate a 2D sheet, which was further linked by 1D chains to form a 3D framework with a new (3,3,4,4)‐connected topology. Furthermore, compound 1 also exhibited excellent stability towards air and water and, more importantly, luminescence experiments indicated that it could serve as a probe for the sensitive detection of paraquat (PAQ) and Fe³⁺ ions in aqueous solution.     

A valence bond model for aqueous Cu(II) and Zn(II) ions in the AMOEBA polarizable force field

A general molecular mechanics (MM) model for treating aqueous Cu²⁺ and Zn²⁺ ions was developed based on valence bond (VB) theory and incorporated into the atomic multipole optimized energetics for biomolecular applications (AMOEBA) polarizable force field. Parameters were obtained by fitting MM energies to that computed by ab initio methods for gas‐phase tetra‐ and hexa‐aqua metal complexes. Molecular dynamics (MD) simulations using the proposed AMOEBA‐VB model were performed for each transition metal ion in aqueous solution, and solvent coordination was evaluated. Results show that the AMOEBA‐VB model generates the correct square‐planar geometry for gas‐phase tetra‐aqua Cu²⁺ complex and improves the accuracy of MM model energetics for a number of ligation geometries when compared to quantum mechanical (QM) computations. On the other hand, both AMOEBA and AMOEBA‐VB generate results for Zn²⁺–water complexes in good agreement with QM calculations. Analyses of the MD trajectories revealed a six‐coordination first solvation shell for both Cu²⁺ and Zn²⁺ ions in aqueous solution, with ligation geometries falling in the range reported by previous studies. © 2012 Wiley Periodicals, Inc.     

Characterization of the polymorphic states of copper(II)‐bound Aβ(1–16) peptides by computational simulations

Understanding the polymorphic states of metal amyloid β (Aβ) interactions helps to elucidate metal‐mediated events in the pathogenesis of Alzheimer's disease. Systematic investigations on the effects of metal ions such as Cu²⁺ and Zn²⁺ on the structural and thermodynamic properties of Aβ at the molecular lever seem desirable. In this study, a set of new AMBER force field parameters was developed to model various Cu²⁺ coordination spheres of Aβ. These parameters including force constants and partial charges obtained using restrained electrostatic potential method were then validated in replica‐exchange molecular dynamics simulations on six Cu²⁺‐Aβ(1–16) systems. The Cu²⁺ coordination geometry differs depending on the Cu²⁺ binding fashions. The structural analyses reveal that Aβ(1–16) prefers turn conformations, which provides a geometrical favor to establish multiple Cu²⁺ coordination modes in solution at physiological pH. The relative stability of different Cu²⁺‐Aβ(1–16) complexes was estimated by free energy calculations. The Cu²⁺ ligands in the most stable Cu²⁺‐Aβ(1–16) structure involve Glu³, His⁶, His¹³ and His¹⁴ in terms of MM/3D‐RISM (molecular mechanics/three‐dimensional reference interaction site model). The solvation free energy and conformational entropy calculated by 3D‐RISM method suggest that the binding of Cu²⁺ within Aβ(1–16) is a spontaneous process. The overlap of the preparation free energy distributions demonstrates the heterogeneous states of Aβ(1–16) conformations that are ready for Cu²⁺ binding whereas the populations of such polymorphic states may shift at differing pH. © 2013 Wiley Periodicals, Inc.     

Polymorph‐Dependent Solid‐State Fluorescence and Selective Metal‐Ion‐Sensor Properties of 2‐(2‐Hydroxyphenyl)‐4(3H)‐quinazolinone

2‐(2‐Hydroxy‐phenyl)‐4(3H)‐quinazolinone (HPQ), an organic fluorescent material that exhibits fluorescence by the excited‐state intramolecular proton‐transfer (ESIPT) mechanism, forms two different polymorphs in tetrahydrofuran. The conformational twist between the phenyl and quinazolinone rings of HPQ leads to different molecular packing in the solid state, giving structures that show solid‐state fluorescence at 497 and 511 nm. HPQ also shows intense fluorescence in dimethyl formamide (DMF) solution and selectively detects Zn²⁺ and Cd²⁺ ions at micromolar concentrations in DMF. Importantly, HPQ not only detects Zn²⁺ and Cd²⁺ ions selectively, but it also distinguishes between the metal ions with a fluorescence λ_max that is blue‐shifted from 497 to 420 and 426 nm for Zn²⁺ and Cd²⁺ ions, respectively. Hence, tunable solid‐state fluorescence and selective metal‐ion‐sensor properties were demonstrated in a single organic material.     

Synthesis and Structures of the Novel Biferrocenamine‐Based Receptor and its Voltammetric Responses to Transition Metal Ions

Reactions of formylferrocene and 1,2‐di‐(o‐aminophenoxy)ethane yield the novel bis(ferrocenyl) receptor (FcL). This compound has been characterized by IR, ¹H NMR and elemental analysis. In addition, the electrochemical behavior of FcL was investigated in detail in 0.1 M tetra‐n‐butylammonium perchlorate (TBAP) + CH₃CN by cyclic voltammetry (CV) and chronoamperometry. Its co‐ordination properties with metal ions in acetonitrile were also studied. The FcL shows a two‐wave behavior for H⁺, Cu²⁺, Zn²⁺ and Ni²⁺, but was unresponsive to Mg²⁺ and Ca²⁺. The maximum oxidation peak shift of about 250 mV was found for FcL in the presence of Cu²⁺, Zn²⁺ or Ni²⁺.     

Comparison effects of different doping on spin-Peierls transition in CuGeO(3)

The comparison between non-magnetic spin-Peierls (SP) and magnetic Néel ground states have been investigated in CuGeO₃ doped with Zn²⁺, Ni²⁺ and Mn²⁺ ions by using the electron spin resonance (ESR) techniques in the temperature range of 3–300 K. It was concluded that the one-dimensional (1D) antiferromagnetic (AF) spin chain formed of spin-1/2 (Cu²⁺) ions is broken by spin-0 (Zn²⁺), spin-1 (Ni²⁺), and spin-5/2 (Mn²⁺) ions, giving uncoupled spins at the end of the chains that give extra contribution to the spectra at lower temperature. An almost linearly dependence of frequency of resonance field has been showed for X-, K- and Q-band spectra. By the analysis of resonance field–frequency relations, the effects of the internal field is refined and thus the spectroscopic g-factor and internal field were calculated to be g = 1.9386 and H_i = 148 G, respectively.     

Amberlite XAD-7 resin impregnated with 2-(1-(4-chlorophenyl)-4,5-diphenyl-1H-imidazol-2yl)-4-nitrophenol for enrichment of metal ions

The Amberlite XAD-7 resin modification was carried out by loading 2-(1-(4-chlorophenyl)-4,5-diphenyl-1H-imidazol-2yl)-4-nitrophenol (CPDPINP). Subsequently, this new sorbent was applied for the enrichment of metal ions such as Cu²⁺, Ni²⁺, Co²⁺ Zn²⁺ and Pb²⁺ ions. The effect of various parameters on their sorption and following recoveries was studied in column procedure. The preconcentrated ions were eluted by appropriate eluent and their contents were quantified by FAAS. This method has preconcentration factor of 150 and enrichment factor in the range of 20.8–29.1. At optimum values of all variables, the proposed method has linear calibration graphs in the range of 0.01 up to 0.29 μg mL⁻¹ with detection limit (3SDb/m, n = 15) between 1.6 and 2.6 ng mL⁻¹. This protocol is usable for successful analysis of Cu²⁺, Ni²⁺, Co²⁺ Zn²⁺ and Pb²⁺ ions in different matrices with reasonable recoveries (>93%) and acceptable relative standard deviation (<4.7%).     

Highly Selective and Sensitive Membrane Sensors for Copper(II) Ion Based on a New Benzo‐Substituted Macrocyclic Diamide 6,7,8,9,10‐Hexahydro‐2H‐1,13,4,7,10‐benzodioxatriazacyclopentadecine‐3,11(4H,12H)‐dione

Novel PVC membrane (PME) and coated graphite (CGE) Cu²⁺‐selective electrodes based on 5,6,7,8,9,10‐hexahydro‐2H‐1,13,4,7,10‐benzodioxatriazacyclopentadecine‐3,11(4H,12H)‐dione are prepared. The electrodes reveal a Nernstian behavior over wide Cu²⁺ ion concentration ranges (1.0×10^?7–1.0×10^?1 M for PME and 1.0×10^?8–1.0×10^?1 M for CGE) with very low limits of detection (7.8×10^?8 M for PME and 9.1×10^?9 M for CGE). The potentiometric responses are independent of the pH of the test solutions in the pH range 2.7–6.2. The proposed electrodes possess very good selectivities for Cu²⁺ over a wide variety of the cations including alkali, alkaline earth, transitions and heavy metal ions. The practical utility of the proposed electrodes have been demonstrated by their use in the study of interactions between copper ions and human growth hormone (hGH) in biological systems, potentiometric titration of copper with EDTA and determination of copper content of a sheep blood serum sample and some other real samples.