K-Ce0.5Zr0.5O2催化碳颗粒物燃烧性能

用等体积浸渍法制备了不同K负载量的xKNO₃-Ce_0.5Zr_0.5O₂系列催化剂，用程序升温氧化反应(TPO)考察催化剂对碳颗粒物(soot)燃烧的催化活性. 并采用XRD、BET、FT-IR、XPS等技术对KNO3负载催化剂进行表征. 结果表明KNO₃负载量对催化剂的比表面、表面化学环境有显著的影响；KNO₃能使催化剂对soot的催化燃烧活性有较大提高，且存在最佳负载量，当x=0.5时，催化剂的活性最好，碳颗粒物的起燃温度（Ti）和峰顶温度（Tp）分别为290 ℃和360 ℃. 在反应过程中，KNO₃熔融状态的形成和K₂CO₃的生成，使催化活性明显提高.     

Cu-Mg/Al复合氧化物催化碳颗粒物燃烧性能的研究

恒定二价与三价阳离子比为3(nM2+/nM3+=3),采用共沉淀法制备不同Cu含量的系列水滑石前驱物, 800 ℃焙烧4 h形成复合氧化物(CuO质量百分数分别为0％、5％、10％、15％、20％、30％、40％)用作柴油车排放碳颗粒物燃烧的催化剂,并采用XRD、BET、TG-DSC、FT-IR、TPR等表征手段研究了Cu、Mg含量对材料前驱物物化性能的影响及对其衍生复合氧化物催化碳颗粒物燃烧性能的影响．结果表明,Cu、Mg含量对材料的热稳定性、比表面和催化氧化活性有显著的影响. Mg有助于提高催化剂的热稳定性; Cu含量增加,催化剂比表面下降,但比表面不是影响催化剂活性的主要因素. CuO含量为15％时,催化剂具有最好的催化活性和稳定性,碳颗粒物的起燃温度(T10)和半转化温度(T50)分别为336 ℃和409 ℃.在CuO含量≤30％时可以形成结构完整的水滑石前驱物, CuO含量为40％时出现Cu(OH)2杂相; CuO含量< 20％时,经高温焙烧可得到均匀的复合氧化物, CuO含量≥20％时出现CuO偏析． TPR结果表明焙烧温度和复合氧化物的组成决定了材料的可还原性能．     

K-Ce_(0.5)Zr_(0.5)O_2催化碳颗粒物燃烧性能

用等体积浸渍法制备了不同K负载量的xKNO3-Ce0.5Zr0.5O2系列催化剂,用程序升温氧化反应(TPO)考察催化剂对碳颗粒物(soot)燃烧的催化活性.并采用XRD、BET、FT-IR、XPS等技术对KNO3负载催化剂进行表征.结果表明KNO3负载量对催化剂的比表面、表面化学环境有显著的影响;KNO3能使催化剂对soot的催化燃烧活性有较大提高,且存在最佳负载量,当x=0.5时,催化剂的活性最好,碳颗粒物的起燃温度(T)i和峰顶温度(Tp)分别为290℃和360℃.在反应过程中,KNO3熔融状态的形成和K2CO3的生成,使催化活性明显提高.     

纳米CeO2基固溶体催化柴油机碳颗粒物燃烧性能

采用柠檬酸溶胶鄄凝胶法制备CeO2基固溶体催化剂(Ce0.7Zr0.3O2-δ、Ce0.7Pr0.3O2-δ和Ce0.7Gd0.3O2-δ), 并考察了固溶体和三种常用载体(TiO2、SiO2和Al2O3)及其负载KNO3后的催化碳黑燃烧活性. 结果表明, CeO2基固溶体催化剂具有很高的催化燃烧活性, 其活性接近TiO2、SiO2和Al2O3负载30%KNO3催化剂的活性. 因为纳米CeO2基固溶体的形成, 提高了催化剂的抗烧结能力, 使氧更活泼, 从而提高氧化还原性能, 有利于碳颗粒燃烧. 由于CeO2基固溶体本身的高活性, 因此KNO3的添加不能明显提高CeO2基固溶体催化剂(尤其是Ce0.7Zr0.3O2-δ和Ce0.7Pr0.3O2-δ)的催化燃烧活性, 但KNO3能显著提高TiO2, SiO2和Al2O3的催化燃烧活性.     

La2-xKxCuO4类钙钛矿复合氧化物对柴油车排放碳颗粒物催化燃烧性能的研究

使用溶胶-凝胶法制备了纳米级不同K取代量的La2-xKxCuO4催化剂，通过H2-TPR，XRD，FT-IR和SEM等多种分析方法对催化剂进行了表征，利用程序升温氧化反应（TPO）就催化剂对碳颗粒物燃烧的催化活性进行了评价。结果表明：以K^＋部分取代La2CuO4中的La^3＋，La2-XKXuO4催化剂对soot催化燃烧的活性明显提高，其中K^＋的取代量对La2CuO4的晶形和活性都产生不同的影响；当x=0．2时，La1.8K0.2CuO4催化剂上呈四方晶相，soot的起燃温度下降到320℃。     

碳催化剂在催化反应中的应用

由于碳材料表面存在缺陷,可生成具有不同性能的活性位,因此可催化不同的热催化反应.我们首先介绍了单质碳材料的表面结构化学:其表面活性位主要为含杂原子官能团;然后对其可催化的反应进行了介绍:碳单质材料可催化选择性氧化反应、高级氧化反应、还原反应、烷烃活化反应、酸催化反应、电催化还原和氧化反应等.对碳单质催化剂的制备方法、所...     

钾改性Mn/Ce0.65Zr0.35O2催化剂催化氧化甲苯

Volatile organic compounds (VOCs) are both harmful to human health and the environment; however, catalytic combustion offers a promising method for VOC purification because of its high efficiency without secondary pollution. Although manganese-based catalysts have been well studied for VOC catalytic oxidation, their catalytic activity at low temperature must be improved. Alkali metals as promoters have the potential to modulate the electronic and structural properties of the catalysts, improving their catalytic activity. Herein, a Ce_0.65Zr_0.35O₂ support was prepared by co-precipitation and MnO_x/Ce_0.65Zr_0.35O₂ catalysts were obtained through the incipient-wetness impregnation method. The catalytic properties of K-modified MnO_x/Ce_0.65Zr_0.35O₂ for toluene oxidation with different molar ratios of K/Mn were investigated. In addition, the catalysts were characterized by XRD, UV/visible Raman, Hydrogen temperature program reduction (H₂-TPR), Oxygen temperature programmed desorption (O₂-TPD), X-ray photoelectron spectroscopy (XPS) and in situ diffuse reflectance FTIR spectroscopy (DRIFTS) experiments. The results showed that alkali metal doping with K significantly improved the catalytic activity. In particular, when the molar ratio of K/Mn was 0.2, the monolith catalyst Mn/Ce_0.65Zr_0.35O₂-K-0.2 exhibited the best performance with the lowest complete conversion temperature T₉₀ of 242 ℃ at a GHSV of 12000 h⁻¹. The XRD results suggested that MnO_x was uniformly distributed on the surface of the catalyst and that Mn⁴⁺ partially reduced to Mn³⁺ on the addition of K. The Raman spectrum demonstrated that with increasing K content, both the β- and α-MnO₂ phases coexisted on the Mn/Ce_0.65Zr_0.35O₂-K-0.2 catalyst, increasing the number of surface defect sites. The H₂-TPR experiment results confirmed that Mn/Ce_0.65Zr_0.35O₂-K-0.2 exhibited the lowest reduction temperature and good reducibility. From the O₂-TPD experiments, it was clear that Mn/Ce_0.65Zr_0.35O₂-K-0.2 contained the most surface adsorbed oxygen species and excellent lattice oxygen mobility, which benefitted the toluene oxidation activity. In addition, the XPS results suggested that the content of surface adsorbed oxygen species of the Mn/Ce_0.65Zr_0.35O₂-K-0.2 catalyst was the highest among all the tested samples. In addition, toluene-TPSR in N₂ as measured by in situ DRIFTs analysis demonstrated that available lattice oxygen was present in the Mn/Ce_0.65Zr_0.35O₂-K-0.2 catalyst. Therefore, the Mn/Ce_0.65Zr_0.35O₂-K-0.2 catalyst exhibited the best redox properties and oxygen mobility of the prepared samples and showed excellent activity toward toluene oxidation. Therefore, it was concluded that the addition of an appropriate amount of K improved the redox performance of the catalyst and increased the number of surface defect sites and mobility of the lattice oxygen of the catalyst as well as the concentration of the surface active oxygen species, thereby significantly improving catalytic ability.     

用于甲苯催化燃烧的Pd/Ce0.8Zr0.2O2/基底整体催化剂

采用浸渍法制备了Pd/Ce0.8Zr0.2O2/基底整体催化剂,应用热重-差示扫描量热、扫描电镜、X射线衍射、氮吸附、拉曼光谱和程序升温还原等技术手段对催化剂进行了表征,考察了不同温度焙烧的整体催化剂的甲苯催化燃烧性能.结果表明,一层均匀紧密的Ce0.8Zr0.2O2涂层很好地分散在基底表面上,该涂层具有良好的抗振荡性和较高的粘结强度.400℃焙烧的Pd/Ce0.8Zr0.2O2/基底整体催化剂的催化活性最高,甲苯转化率达97%以上的最低反应温度为210℃.此外,Pd/Ce0.8Zr0.2O2/基底整体催化剂具有良好的热稳定性,这可能是因为CeO2-ZrO2固溶体的形成和高温下PdO的稳定存在.     

钒氮共掺杂多孔碳催化剂上苄胺氧化偶联合成亚胺

本工作以生物质壳聚糖作为牺牲模板,乙酰丙酮钒为金属钒源,ZnCl₂为造孔剂,采用高温热解结合酸洗的策略制备出一种钒氮共掺杂多孔碳（V-N-C）催化剂。表征结果表明,V-N-C催化剂的比表面积高达1 470 m²·g^-1,孔容为1.06 cm³·g^-1,质量分数为0.19%的钒物种可能以单原子VN_x形式高度分散在载体上。在苄胺氧化偶联合成亚胺的反应中,V-N-C表现出高催化性能,底物苄胺的转化率和产物亚胺的选择性均为99%,性能明显优于均相VO（acac）₂和多相V₂O₅催化剂。此外V-N-C催化剂连续重复使用9次也未出现任何活性衰减的问题,且对一系列含有不同官能团的底物也具有优良的普适性。机理研究表明,苄胺和氧气首先分别在催化剂VN_x和缺陷位点活化成苄基亚胺和H₂O₂中间体,然后苄基亚胺与苄胺缩合脱NH₃生成目标产物亚胺。     

Ce0.5+xZr0.4-xLa0.1O2-Al2O3催化剂催化燃烧柴油车碳烟

采用共沉淀法制备了系列Ce_0.5+xZr_0.4-xLa_0.1O₂-Al₂O₃催化剂, 其中0≤x≤0.4且Ce_0.5+xZr_0.4-xLa_0.1O₂与Al₂O₃的质量比为1:1. 考察了该系列催化剂对柴油车排放碳烟的催化燃烧性能, 并用低温N2吸附-脱附、X射线衍射(XRD)、X射线光电子能谱(XPS)、氢气程序升温还原(H₂-TPR)和氧气程序升温脱附(O₂-TPD)等手段对催化剂进行了表征. 研究结果表明该系列催化剂均形成了具有立方萤石结构的固溶体. 当x=0.2时, Ce³⁺离子在催化剂表面有一定的富集, 此时催化剂具有最大的β氧脱附峰和最好的表面还原性能, 同时具有良好的催化碳烟氧化活性, 碳烟在该催化剂的起燃温度为360 °C, 具有较好的应用前景.     

CexZr1-xO2/Co/C-N催化CO2加氢性能研究

将不同比例的铈锆前驱体负载到ZIF-67,氮气气氛焙烧制备CexZr1-xO2/Co/C-N催化剂,对催化剂进行了XRD,H2-TPR、XPS表征,并在固定床反应器评价其CO2加氢制甲醇性能。XRD结果表明,在铈中加入适量锆形成铈锆固溶体,铈锆固溶体与钴物种较强的相互作用力可以阻止表明金属Co的氧化。但过量加入的锆又会削弱这一作用力,部分金属Co被氧化为Co3O4。H2-TPR结果表明适量的锆的加入改善催化剂的还原性能,催化剂还原温度降低。XPS证实了25%Ce0.67Zr0.33O2/Co/C-N催化剂中含有更多的氧空穴及氮含量,氧空穴和碱性氮都有利于CO2的解离吸附。优化后的25%Ce0.67Zr0.33O2/Co/C-N 催化剂在225 oC,2 MPa,GHSV = 6 L/gcat/h反应条件下取得最高甲醇时空收率,为3.0 mmol/gcat/h。     

Effect of Transition Metals (Cu, Co and Fe) on the Autothermal Reforming of Methane over Ni/Ce0.2Zr0.1Al0.7Oδ Catalyst

The transition metals (Cu, Co, and Fe) were applied to modify Ni/Ce0.2Zr0.1Al0.7Oδ catalyst.The effects of transition metals on the catalytic properties of Ni/Ce0.2Zr0.1Al0.7Oδ autothermal reforming of methane were investigated. The Ni-supported catalysts were characterized by XRD, TPR and XPS.Tests in autothermal reforming of methane to hydrogen showed that the addition of transition metals (Cu and Co) significantly increased the activity of catalyst under the conditions of lower reaction temperature,and Ni/Cu0.05Ce0.2Zr0.1Al0.65Oδ was found to have the highest conversion of CH4 among all catalysts in the operation temperatures ranging from 923 K to 1023 K. TPR, XRD and XPS measurements indicated that the cubic phases of CexZr1-xO2 solid solution were formed in the preparation process of catalysts.Strong interaction was found to exist between NiO and CexZr1-xO2 solid solution. The addition of Cu improved the dispersion of NiO, inhibited the formation of NiAl2O4, and thus significantly promoted the activity of the catalyst Ni/Cu0.05Ce0.2Zr0.1Al0.65Oδ.     

一锅法合成Ce_xZr_(1-x)O_2固溶体催化剂用于热化学循环分解CO_2制CO

采用一锅蒸发诱导自组装法(EISA)制备了一系列不同铈锆物质的量比的铈锆固溶体催化剂,用TGA研究了其热化学循环分解CO_2制CO的催化性能,并采用XRD、Raman光谱、H2-TPR、XPS、SEM和N_2吸附-脱附等手段对催化剂的物相结构、还原性能和表面化学性质进行了表征分析,用热重分析(TGA)研究了铈锆固溶体对热化学循环分解CO_2制CO的催化性能。结果表明,随着Ce/Zr物质的量比增加,铈锆固溶体催化剂的CO_2高温分解活性先增大后减小。Ce/Zr物质的量比为1的Ce_(0.5)Zr_(0.5)O_2催化剂由于具有较多的晶格缺陷和氧空穴,氧迁移能力强,催化活性高,而Ce/Zr物质的量比为3的Ce_(0.75)Zr_(0.25)O_2催化剂具有相对稳定的氧空穴数,循环稳定性好。循环反应后,所有的催化剂均出现了一定程度的烧结,且富锆固溶体发生了相分离,这可能会影响催化剂的性能。     

Vapor phase reduction of cyclohexanone to cyclohexanol on CexZr1-xO2 solid solutions

Reduction of cyclohexanone to cyclohexanol using propane-2-ol as hydrogen donor has been carried out in vapor phase on Ce_xZr_1-xO₂ solid solutions synthesized by ombustion synthesized at 302°C. The solid solutions around 0.4 mol% cerium content show better catalytic activity compared to pure ZrO₂ and the selectivity to cyclohexanol is 98%. A moderate acid-base and good redox properties of Ce_xZr_1-xO₂ solid solutions are seen to be responsible for the catalytic activity. A possible mechanism of hydride transfer has been proposed with cerium ions as promoters. This revised version was published online in June 2006 with corrections to the Cover Date.     

Pd/CexZr1-xO2/SiO2催化剂的制备及其甲烷催化燃烧性能的研究

采用浸渍法制备了Pd质量分数为0.1%~1.0%的Pd/SiO2和Pd/5%CexZr1-xO2/SiO2（x0.0~1.0）系列催化剂,在微型固定床反应器上对催化剂的甲烷催化燃烧性能进行了评价,用XRD、H2-TPR等分析测试技术对催化剂的结构进行了表征。结果表明,Pd/SiO2和Pd/CexZr1-xO2/SiO2催化剂都具有较好的甲烷催化燃烧活性,CexZr1-xO2可以明显提高催化剂的催化活性,并且Ce和Zr的比值对催化剂催化活性也有显著的影响。XRD和TPR显示,Pd/CexZr1-xO2/SiO2催化剂中的CexZr1-xO2对PdO的分散性和还原性有较好的促进作用。     

Effect of Transition Metals (Cu, Co and Fe) on the Autothermal Reforming of Methane over Ni/Ce0.2Zr0.1Al0.7Oδ Catalyst

The transition metals (Cu, Co, and Fe) were applied to modify Ni/Ce0.2Zr0.1 Al0.7Oδcatalyst. The effects of transition metals on the catalytic properties of Ni/Ce0.2Zr0.1 Al0.7Oδautothermal reforming of methane were investigated. The Ni-supported catalysts were characterized by XRD, TPR and XPS. Tests in autothermal reforming of methane to hydrogen showed that the addition of transition metals (Cu and Co) significantly increased the activity of catalyst under the conditions of lower reaction temperature, and Ni/Cu0.05Ce0.2Zr0.1Al0.65Oδwas found to have the highest conversion of CH4 among all catalysts in the operation temperatures ranging from 923 K to 1023 K. TPR, XRD and XPS measurements indicated that the cubic phases of CexZr1-xO2 solid solution were formed in the preparation process of catalysts. Strong interaction was found to exist between NiO and CexZr1-xO2 solid solution. The addition of Cu improved the dispersion of NiO, inhibited the formation of NiAl2O4, and thus significantly promoted the activity of the catalyst Ni/Cu0.05Ce0.2Zr0.1Al0.65Oδ.     

Ce0.67Zr0.33O2对CH4燃烧催化剂Fe2O3/Al2O3的改性作用

固定n（Ce）／n（Zr）比为0．67／0．33,用共沉淀法制得一系列CeO2-ZrO2-Al2O3固溶体,采用这些固溶体作载体,以Fe2O3为活性组分,用浸渍法制备了一系列催化剂,BET结果显示,将适量Ce0.67Zr0．33O2引入到Al2O3载体中有助于催化剂保持较高的比表面积,TPR结果显示,载体中引入适量的Ce0．67Zr0.33O2可以改善催化剂的氧化还原性能,XRD结果表明,Fe2O3在CeO2-ZrO2-Al2O3载体上呈现出良好的分散状况,老化前后催化剂的晶相结构基本无明显变化,特别是当载体中m（Ce0.67Zr0.33O2）：m（Al2O3）的值为1：2时,Fe2O3／CeO2-ZrO2-Al2O3催化剂在甲烷催化燃烧中显示出最佳的催化性能和抗高温老化性能。