Influence of water on the vapor–liquid equilibria,activity coefficients at infinite dilution and enthalpies of mixing for mixtures of N-methyl-2-pyrrolidone with C5 or C6 hydrocarbons

Reliable P–x and enthalpy of mixing data have been measured for the ternary systems 1-hexene+water+N-methyl-2-pyrrolidone (NMP), 3-methylcyclopentene+water+NMP, 3-methylpentane+water+NMP, 1-pentene+water+NMP, and 2-methylbutane+water+NMP at 90 °C, and for 1-hexene+water+NMP also at 140 °C using a static apparatus and an isothermal flow calorimeter, respectively. Activity coefficients at infinite dilution for the different hydrocarbons in the solvent have been derived from the P–x data in the dilute composition range, where the water content of NMP ranged between 0 and 6 wt.%. NRTL parameters have been fitted to the experimental data.     

A comprehensive study of {γ-butyrolactone + 1-methyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide} binary mixtures

Density, electrical conductivity and viscosity of binary liquid mixtures of γ-butyrolactone, (GBL) with 1-methyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide, [pmim][NTf₂], were measured at different temperatures from (293.15 to 323.15) K and at atmospheric pressure (p = 0.1 MPa) over the whole composition range. Excess molar volumes have been calculated from the experimental densities and were fitted with Redlich–Kister’s polynomial equation. Other volumetric properties have been also calculated in order to obtain information about interactions between GBL and selected ionic liquid. All the results are compared with those obtained for binary mixtures of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [bmim][NTf₂], with GBL. From the viscosity measurements, the Angell strength parameter was calculated for pure ionic liquid indicating that [pmim][NTf₂] is a “fragile” liquid. Electrical conductivity results were discussed in the scope of Bahe–Varela theoretical model.     

Synthesis of dipyrrolo[2,3-a:1′,2′,3′-fg]acridin-12(1H)-ones

Acylation reactions of 4,6-dimethoxyindoles with glyoxyloyl chlorides were achieved by the use of graphite powder in 1,2-dichloroethane at reflux. The products were monoketones as a result of decarbonylation, rather than the expected 1,2-diketones. Treatment of these monoketones with base led to their cyclisation and elimination of methanol to afford the novel dipyrrolo[2.3-a:1′,2′,3′-fg]acridin-12(1H)-ones.     

Density,excess properties,electrical conductivity and viscosity of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide + γ-butyrolactone binary mixtures

Density, electrical conductivity and viscosity of binary liquid mixtures of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [bmim][NTf₂], with γ-butyrolactone (GBL) were measured at temperatures from (293.15 to 323.15) K and at atmospheric pressure over the whole composition range. Excess molar volumes have been calculated from the experimental densities and were fitted with Redlich–Kister polynomial equation. Other volumetric properties, such as isobaric thermal expansion coefficients, partial molar volumes, apparent molar volumes and partial molar volumes at infinite dilution have been also calculated, in order to obtain information about interactions between GBL and selected ionic liquid.     

Experimental determination and prediction of (solid + liquid) phase equilibria for binary mixtures of aromatic and fatty acids methyl esters

Solid–liquid equilibria for binary mixtures of {methyl stearate (1) + biphenyl (2)}, {methyl stearate (1) + naphthalene (2)}, {methyl palmitate (1) + biphenyl (2)} and {methyl palmitate (1) + naphthalene (2)} were measured using differential scanning calorimeter. Simple eutectic behaviours for these systems were observed. The experimental results were correlated by means of the NRTL, Wilson, UNIQUAC and ideal models. The root-mean-square deviations of the solubility temperatures for all measured data vary from 0.5477 K (for UNIQUAC model) to 7.79 K; the deviations depend on the binary system studied and particular model used. The best solubility correlation was obtained with UNIQUAC model and this observation confirms previous results.     

The rearrangement of 1H,1′H-spiro[quinoline-4,2′-quinoxaline]-2,3′ (3H,4′H)-diones – a new and efficient method for the synthesis of 4-(benzimidazol-2-yl)quinolin-2(1H)-ones

A new and highly efficient method for the synthesis of 4-(benzimidazol-2-yl)quinolin-2(1H)-ones via the rearrangement of spiroquinoxalinones in moderate-to-excellent yields has been developed. The rearrangement represents a facile approach to medicinally important biheterocyclic compounds. Compared to other methods, the present protocol has a number of advantages such as – cost-effectiveness, avoidance of difficult of access quinolin-2-one and benzimidazole derivatives as reaction partners, and easy accessibility of starting materials, making it a highly practical approach to access various 4-(benzimidazol-2-yl)quinolin-2(1H)-ones.     

Experimental determination and prediction of (solid + liquid) phase equilibria for binary mixtures of heavy alkanes and fatty acids methyl esters

Solid–liquid equilibria for three binary mixtures of {n-eicosane (1) + methyl palmitate (2)}, {n-tetracosane (1) + methyl stearate (2)} and {n-octacosane (1) + methyl stearate (2)} were measured using differential scanning calorimeter. Simple eutectic behaviours for these systems were observed. The experimental results were correlated by means of the modified UNIFAC (Larsen and Gmehling versions), UNIQUAC and ideal models. The root-mean-square deviations of the solubility temperatures for all measured data vary from 0.21 K (for UNIQUAC model) to 1.07 K (for Ideal model) and depend on the particular model used. The best solubility correlation was obtained with UNIQUAC model.     

Measurement and prediction of (solid + liquid) equilibria of gun powder’s and propellant’s stabilizers mixtures

A differential scanning calorimetry (d.s.c.) was used to determine binary (solid + liquid) phase equilibria (SLE) for four binary mixtures, viz. (n-nitrosodiphenylamine + diphenylamine), (2-nitrodiphenylamine + ethyl centralite), (2,4-dinitro-N-ethylaniline + methyl centralite), and (2,4-diphenylamine + 4,4′-dinitroethylcentralite). These compounds are used as stabilizers in gun powders and propellants. Results obtained with this technique are compared with those correlated by NRTL and ideal models. It was found out that all the systems are simple eutectic systems and deviations between experimental and predicted SLE results were observed.     

Physico-chemical Properties of Binary and Ternary Mixtures of Ethyl Acetate + Ethanol + 1-Butyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide at 298.15 K and Atmospheric Pressure

Densities, viscosities and refractive indices have been measured at 298.15 K and atmospheric pressure for binary and ternary mixtures of ethanol, ethyl acetate and 1-butyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl) imide [C₄mim][NTF₂]. From these experimental properties, the corresponding excess properties have been calculated and adequately fitted with the Redlich-Kister polynomial equation. The adjustable parameters and standard deviations between experimental and calculated values are reported. Interest of this mixture is due to the possibility of using [C₄mim][NTF₂] as an entrainer in the extractive distillation of ethanol + ethyl acetate. These results are compared with previously determined experimental data for mixtures of ethyl acetate and/or ethanol with the ionic liquid 1-octyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide, [C₈mim][NTF₂].     

Ideal and non-ideal behaviour of {1-butyl-1-methylpyrrolydinium bis(trifluoromethylsulfonyl)imide + γ-butyrolactone} binary mixtures

Density, electrical conductivity and viscosity of binary liquid mixtures of 1-butyl-1-methylpyrrolydinium bis(trifluoromethylsulfonyl)imide, [bmpyrr][NTf₂], with γ-butyrolactone (GBL) were measured at temperatures from (293.15 to 323.15) K and at atmospheric pressure over the whole composition range. Excess molar volumes have been calculated from the experimental densities and fitted with the Redlich–Kister polynomial equation. These values are positive over the whole range of ionic liquid mole fraction and at all temperatures. In the range between 0.55 and 0.6 [bmpyrr][NTf₂] mole fraction, an ideal behaviour of the ionic liquid mixture with molecular solvent was observed for the first time. Other volumetric properties, such as isobaric thermal expansion coefficients, partial molar volumes and partial molar volumes at infinite dilution have been also calculated, in order to obtain information about interactions between GBL and selected ionic liquid. Positive values of these properties for both components also indicate weaker interactions between GBL and IL compared to the pure components. From the viscosity results, the Angell strength parameter was calculated and found to be 3.24 indicating that [bmpyrr][NTf₂] is a “fragile” liquid. From the volumetric and transport properties obtained, formation of the [bmpyrr]⁺ micellar structures was also discussed. All the results are compared to those obtained for imidazolium-based ionic liquid with GBL.     

Synthesis and characterization of new silica–titania mixed oxide in the presence of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide by sol–gel technique

Silica–titania mixed oxide were prepared by sol–gel method from tetraethylorthosilicate and titanium (IV) isopropoxide as precursors in the presence of room temperature ionic liquid (RTIL), 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide [C₄MIm][NTf₂]. The effects of [C₄MIm][NTf₂] on the structural and textural characteristics of silica–titania matrix are investigated in this paper. The materials obtained were well characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis X-ray powder diffraction (XRPD), field emission scanning electron microscope (FESEM) and N₂ adsorption–desorption analysis. It is believed that the [C₄MIm][NTf₂] plays an important role as a template and the high surface area of the samples is thought to mainly attribute to the formation of microporous in the reaction. The synthesized materials showed the presence of C–N groups in the FTIR spectrum which indicates the presence of RTIL in the silica–titania matrix. XRPD, FESEM and N₂ adsorption–desorption analysis results indicated that the composite materials possessed good microporous character. The subsequent material displayed average pore diameter of 1.70–2.12 nm, pore volume of 0.08–0.19 cm³/g and BET surface area of 191–386 m²/g. Increasing the content of RTIL resulted in an increase of the average pore diameter of the silica–titania gel.     

Ebulliometric determination and prediction of (vapor + liquid) equilibria for binary and ternary mixtures containing alcohols (C1–C4) and dimethyl carbonate

(Vapor + liquid) equilibrium (VLE) data for a ternary mixture, namely {methanol + propan-1-ol + dimethyl carbonate (DMC)}, and four binary mixtures, namely an {alcohol (C₃ or C₄) + DMC}, containing the binary constituent mixtures of the ternary mixture, were measured at p = (40.00 to 93.32) kPa using a modified Swietoslawski-type ebulliometer. The experimental data for the binary systems were correlated using the Wilson model. The Wilson model was also applied to the ternary system to predict the VLE behavior using parameters from the binary mixtures. The modified UNIFAC (Dortmund) model was also tested for the predictions of the VLE behavior of the binary and ternary mixtures. In addition, the experimental VLE data for the ternary and constituent binary mixtures were correlated using the extended Redlich–Kister (ERK) model, which can completely represent the azeotropic points. For the ternary system, a comparison of the experimental and the predicted or correlated boiling points obtained using the Wilson and ERK models showed that the ERK model is more accurate. The valley line, i.e., the curve which divides the patterns of vapor–liquid tie lines, was found in the (methanol + propan-1-ol + DMC) system. This valley line could be represented by the ERK model. Finally, the composition profile for simple distillation of this ternary mixture was obtained by analysis of the residue curves from the estimated Wilson parameters of the constituent binary mixtures.     

A novel pseudo-seven-component diastereoselective synthesis of λ-phosphanylidene bis(2,5-dioxotetrahydro-1H-pyrrole-3-carboxylates) via binucleophilic systems

The unusual 1:2 intermediate, generated by the addition of triphenylphosphine (TPP) to dialkyl acetylenedicarboxylates (DAAD) was trapped during the reaction of a Ph₃P/RN = C/DMAD binucleophilic system with TFA as an initial proton source in a pseudo-seven-component (7-CR) diastereoselective reaction to give λ⁵-phosphanylidene bis(2,5-dioxotetrahydro-1H-pyrrole-3-carboxylates) with three stereogenic centers and a phosphorane group in good yields.     

A facile and efficient synthesis of fully substituted pyridin-2(1H)-ones from α-oxoketene-S,S-acetals

A facile and efficient synthesis of fully substituted pyridin-2(1H)-ones has been developed by the reaction of readily available α-oxoketene-S,S-acetals with malononitrile in the presence of sodium methoxide in methanol under reflux.     

Oxidation of thiazolo[3,2-a]pyrimidin-3(2H)-ones with DMSO and Lawesson’s reagent

2,2′-Dimers with a central double bond were prepared by the oxidation of 5,6-disubstituted 7-methyl-5H-[1,3]thiazolo[3,2-a]pyrimidin-3(2H)-ones with DMSO and Lawesson’s reagent at room temperature. The role of DMSO as an oxidizing reagent was confirmed by NMR spectroscopy. The E-configuration of the central CC bond for the two diastereomers of compound 8m was proven by single crystal X-ray data. The dimeric thiazolopyrimidines were orange or red colored and absorption bands at 283–330 and 459–476?nm were observed in the UV spectra.     

Thermodynamics of binary mixtures containing N-methyl-2-pyrrolidinone: VLE measurements for systems with ethers—Comparison with the Mod. UNIFAC (Do) and DISQUAC models—Predictions for VLE,GmE, HmE and SLE

Isothermal vapour–liquid equilibrium data, (VLE) have been measured by an ebulliometric method for four binary mixtures of N-methyl-2-pyrrolidinone (NMP) with dipropyl ether at T = 353.15 K and T = 373.15 K, or dibutyl ether at T = 373.15 K, or methyl 1,1-dimethylethyl ether (MTBE) at T = 333.15 K, or methyl 1,1-dimethylpropyl ether (MTAE) at T = 353.15 K, in the pressure range from P = 0 kPa to P = 135 kPa.The experimental VLE results have been correlated using a three parameter Redlich–Kister expansion. All these systems present positive deviations from Raoult's law.Binary mixtures of NMP with dipropyl ether, dibutyl ether, MTBE and MTAE have been investigated in the framework of the Modified UNIFAC (Do) and DISQUAC models. The reported new interaction parameters for the NMP-group (NCO) and the ether group (O) give much better results than known from literature predictions of the thermodynamic properties, including vapour–liquid equilibrium, excess molar Gibbs energy, molar excess enthalpies and solid–liquid equilibrium. Our experimental data and literature data for binary mixtures containing NMP and ethers were compared to the results of predictions with the Mod. UNIFAC (Do) and DISQUAC models.     

In vitro hydrolytic degradation of poly(?-caprolactone) grafted dextran fibers and films

We studied the hydrolytic degradation of poly(?-caprolactone) grafted dextran (PGD) fibers and films (matrices) prepared by electrospinning and solvent evaporation methods, respectively. In vitro degradation and erosion experiments were carried out in phosphate buffered saline (pH 7.4 ± 0.1) at 37 ± 1 °C for 150 days. Changes in molecular weights and morphologies of the PGD matrices were monitored as a function of degradation time. The extent of degradation was measured by physical weight loss, scanning electron microscopic (SEM) observations, Fourier transform-infrared (FT-IR) spectroscopy, gel permeation chromatography (GPC) and differential scanning calorimetry (DSC). During the progress of hydrolysis, GPC chromatograms appeared bi modal for fibers and bi and trimodal for the films. The crystallization temperature (T_c) and heat of fusion were significantly increased in both matrices; this indicated preferential hydrolytic degradation in amorphous regions followed by cleavage-induced crystallization. The biodegradation rates were faster for the films (28%) than fibers (23%). After 150 days of degradation, the pH was steady at 5.8 ± 0.3 for fibers and 6.1 ± 0.3 for films. The faster degradation of the films could be probably due to autocatalysis in the interior of the films and the degraded oligomers are hard to diffuse out into the surrounding solution due to its compact physical geometry. Thus, our preliminary results about the degradation of matrices suggested that PGD nanofibers could be excellent matrices in tissue engineering over the films.