Liquid-liquid equilibria of (water + butyric acid + diethyl succinate or diethyl glutarate or diethyl adipate) ternary systems

Liquid-liquid equilibrium (LLE) data of the solubility (binodal) curves and tie-line end compositions were examined for mixtures of {(water (1) + butyric acid (2) + diethyl succinate or diethyl glutarate or diethyl adipate (3)} at 298.2 K and 101.3 ± 0.7 kPa. The relative mutual solubility of butyric acid is higher in the diethyl succinate or diethyl glutarate or diethyl adipate layers than water layers. The consistency of the experimental tie-lines was determined through the Othmer-Tobias correlation equation. The LLE data were correlated with NRTL model, indicating the reliability of the NRTL equations for these ternary systems. The best results were achieved with the NRTL equation, using non-randomness parameter (α = 0.3) for the correlation. Distribution coefficients and separation factors were measured to evaluate the extracting capability of the solvents.     

Phase equilibria of liquid (water + butyric acid + oleyl alcohol) ternary system

(Liquid + liquid) equilibrium (LLE) data for the ternary system of (water + butyric acid + oleyl alcohol) at T = (298.15, 308.15, and 318.15) K are reported. Complete phase diagrams were obtained by determining solubility and the tie-line data. The reliability of the experimental tie lines was confirmed by using Othmer-Tobias correlation. The UNIFAC method was used to predict the phase equilibrium data. The phase diagrams for the ternary mixtures including both the experimental and correlated tie lines are presented. Distribution coefficients and separation factors were evaluated for the immiscibility region. A comparison of the solvent extracting capability was made with respect to distribution coefficients, separation factors, and solvent-free selectivity bases for T = (298.15, 308.15, and 318.15) K. It is concluded that oleyl alcohol may serve as an adequate solvent to extract butyric acid from its dilute aqueous solutions.     

(Liquid + liquid) equilibria of the (water + acetic acid + dibasic esters mixture) system

(Liquid + liquid) equilibrium (LLE) data for the {water + acetic acid + dibasic esters mixture (dimethyl adipate + dimethyl glutarate + dimethyl succinate)} system have been determined experimentally at T = (298.2, 308.2, and 318.2) K. Complete phase diagrams were obtained by determining solubility curve and tie-line data. The reliability of the experimental tie-line data was confirmed by using the Othmer-Tobias correlation. The UNIFAC model was used to predict the phase equilibrium in the system using the interaction parameters determined from experimental data between CH₂, CH₃COO, CH₃, COOH, and H₂O functional groups. Distribution coefficients and separation factors were compared with previous studies.     

(Liquid + liquid) equilibria of (water + propionic acid + alcohol) ternary systems

(Liquid + liquid) equilibrium (LLE) data of the solubility (binodal) curves and tie-line end composition were examined for mixtures of {water (1) + propionic acid (2) + octanol or nonanol or decanol or dodecanol (3)} at T = 298.15 K and 101.3 ± 0.7 kPa. The reliability of the experimental tie-line data was confirmed by using the Othmer-Tobias correlation. The LLE data of the ternary systems were predicted by UNIFAC method. Distribution coefficients and separation factors were evaluated for the immiscibility region.     

Phase equilibria of (water-carboxylic acid-diethyl maleate) ternary liquid systems at 298.15 K

Liquid-liquid equilibrium (LLE) data for the ternary systems of (water-formic acid-diethyl maleate), (water-acetic acid-diethyl maleate), (water-propionic acid-diethyl maleate), (water-butyric acid-diethyl maleate), and (water-valeric acid-diethyl maleate) were investigated at 298.15 K and atmospheric pressure. Complete phase diagrams were obtained by determining solubility and the tie-line data. The tie-line data were compared with the results predicted by the UNIFAC and the modified UNIFAC (Dortmund) methods and correlated by means of UNIQUAC model. The reliability of the experimental tie-line data was confirmed by using the Othmer-Tobias correlation. Distribution coefficients and selectivity were evaluated for the immiscibility region.     

(Liquid + liquid) equilibria of (water + propionic acid + cyclohexanone) at several temperatures

(Liquid + liquid) equilibrium (LLE) data for (water + propionic acid + cyclohexanone) were measured under atmospheric pressure and at T = (293.2, 298.2 and 303.2) K. Phase diagrams were obtained by determining solubility and tie-line data. The LLE data of the ternary systems were predicted by UNIFAC method. Distribution coefficients and separation factors were evaluated over the immiscibility regions.     

Isobaric vapor–liquid equilibria for water + propylene glycol monomethyl ether (PGME), water + propyleneglycol monomethyl ether acetate (PGMEA), and PGME + PGMEA at reduced pressures

Isobaric vapor–liquid equilibria were measured for three binary systems of water + propyleneglycol monomethyl ether (PGME), water + propyleneglycol monomethyl ether acetate (PGMEA), and PGME + PGMEA at 93.3, 53.3, 26.7 kPa. The equipment used was a modified Rogalski-Malanoski equilibrium still and an ebulliometer. The NRTL equation correlated the experimental binary data with good accuracy.     

(Liquid + liquid) equilibria of the quaternary system methanol + isooctane + cyclohexane + benzene at T = 303.15 K

Tie line data of the ternary system {methanol + isooctane + cyclohexane} were obtained at T = 303.15 K. A quaternary system containing these three compounds and benzene was also studied at the same temperature, while data for {methanol + benzene + cyclohexane} and {methanol + benzene + isooctane} were taken from literature. In order to obtain the binodal surface of the quaternary system, four quaternary sectional planes with several cyclohexane/isooctane ratios were studied. The distribution of benzene between both phases was also analysed. Ternary experimental results were correlated with the UNIQUAC and NRTL equations and compared with predictions using the UNIFAC group contribution method.     

Liquid phase equilibria of (water + phosphoric acid + 1-butanol or butyl acetate) ternary systems at T = 308.2 K

(Liquid + liquid) equilibria and tie lines for the ternary systems of (water + phosphoric acid + 1-butanol) and (water + phosphoric acid + butyl acetate) were measured at T = 308.2 K. The experimental ternary (liquid + liquid) equilibrium data were correlated with the UNIQUAC model. The reliability of the experimental tie lines was confirmed using Othmer-Tobias correlation. The average root-mean-square deviation (RMSD) values of (water + phosphoric acid + 1-butanol) and (water + phosphoric acid + butyl acetate) systems were 2.17% and 2.16%, respectively. Distribution coefficients and separation factors were measured to evaluate the extracting capability of the solvents. The results show that butyl acetate may be considered as a reliable organic solvent for the extraction of phosphoric acid from aqueous solutions.     

Liquid + liquid equilibria for the quaternary systems of (water + acetic acid + mixed solvent) at 298.2 K and atmospheric pressure

Liquid–liquid equilibrium (LLE) data for the quaternary systems of [water + acetic acid + mixed solvent (dipropyl ether + diisopropyl ether)] were measured at 298.2 K and atmospheric pressure, using various compositions of mixed solvent. Binodal curves and tie-lines for the quaternary systems have been determined in order to investigate the effect of solvent mixture, dipropyl ether (DPE) and diisopropyl ether (IPE), on extracting acetic acid from aqueous solution. A comparison of the extracting capabilities of the mixed solvents was made with respect to distribution coefficients, separation factors, and solvent free selectivity bases. Reliability of the data was confirmed by using the Othmer–Tobias and Hand plots. The tie-lines were also correlated using the UNIFAC model. The average root-mean-square deviations between the observed and calculated mass fractions for the studied systems were in the range of 10–14%.     

Phase equilibria in ternary aqueous mixtures of 1,3-butanediol with 2-ethyl-1-hexanol at T = (298.2, 303.2 and 308.2) K

Experimental tie-line data for ternary system of (water + 1,3-butanediol (1,3-BD) + 2-ethyl-1-hexanol (2EH)) were determined at T = (298.2, 303.2 and 308.2) K under atmospheric conditions. This ternary system exhibits type-1 behavior of LLE. The experimental ternary LLE data were correlated using the NRTL model, and the binary interaction parameters were obtained. The average root-mean-square deviation between the observed and calculated mole fractions was 1.38%. Distribution coefficient and separation factor were measured to evaluate the extracting capability of the solvent. The separation factor values for the solvent used in this work were then compared with literature values obtained in our previous works for other butanediols.     

Vapor–liquid equilibria of the 1,1,1-trifluoroethane (HFC-143a) + dimethyl ether (DME) system

Binary vapor liquid equilibrium data were measured for the 1,1,1-trifluoroethane (HFC-143a) + dimethyl ether (DME) system at temperatures from 313.15 K to 363.15 K. These experiments were carried out with a circulating-type apparatus with on-line gas chromatograph analysis. The experimental data were correlated well by the Peng-Robinson equation of state using the Wong-Sandler mixing rules.     

Quinary liquid–liquid equilibria for mixtures of nonane + undecane + two pairs of aromatics (benzene/toluene/m-xylene) + sulfolane at 298.15 and 313.15 K

In this work, liquid–liquid equilibrium data were measured for three quinary mixtures (nonane + undecane + benzene + toluene + sulfolane), (nonane + undecane + benzene + m-xylene + sulfolane) and (nonane + undecane + toluene + m-xylene + sulfolane) at 298.15 and 313.15 K and ambient pressure. The experimental LLE data were determined by using a jacketed glass cell with temperature controlled. The quantitative analysis was performed by using a Varian gas chromatograph equipped with a flame ionization detector and a SPB™-1 column. The experimental quinary liquid–liquid equilibrium data have been satisfactorily correlated by using NRTL and UNIFAC-LLE models. The calculated values based on the NRTL model were found to be in a better agreement with the experiment than those based on the UNIFAC-LLE model.     

Measurement and correlation of liquid–liquid equilibria for acetonitrile + n-alkane systems

The reduction of sulfur content in gasoline and diesel fuel is a great environmental concern to reduce the motor vehicle emissions. Oxidative desulfurization using acetonitrile biphasic system has received much attention in recent years. The oxidative desulfurization can be oxidized the unreactive sulfur contents in the hydrodesulfurization and removed effectively. For the oxidative desulfurization process design and development, liquid–liquid equilibria (LLE) for acetonitrile biphasic systems are needed as fundamental information. In our previous work, LLE for acetonitrile + n-octane and + n-decane systems have been reported. In this work, therefore, LLE for acetonitrile + n-hexadecane system was measured. Furthermore, NRTL equation was applied to correlate the LLE for these three acetonitrile + n-alkane systems.     

Isobaric vapor–liquid equilibria for the quaternary reactive system: Ethanol + water + ethyl lactate + lactic acid at 101.33 kPa

Isobaric vapor–liquid equilibrium (VLE) data of the reactive quaternary system ethanol (1) + water (2) + ethyl lactate (3) + lactic acid (4) have been determined experimentally. Additionally, the reaction equilibrium constant was calculated for each VLE experimental data. The experimental VLE data were correlated using the UNIQUAC equation to describe the chemical and phase equilibria simultaneously. For some of the non-reactive binary systems, UNIQUAC binary interaction parameters were obtained from the literature. The rest of the binary UNIQUAC parameters were obtained by correlating the experimental quaternary VLE data obtained in this work. A maximum pressure azeotrope at high water concentration for the binary reactive system ethyl lactate + water has been calculated.     

(Liquid + liquid) equilibria of {heptane + xylene + N-formylmorpholine} ternary system

(Liquid + liquid) equilibrium (LLE) data for ternary system {heptane (1) + m-xylene (2) + N-formylmorpholine (3)} have been determined experimentally at temperatures ranging from 298.15 K to 353.15 K. Complete phase diagrams were obtained by determining solubility and tie-line data. Tie-line compositions were correlated by Othmer-Tobias and Bachman methods. The universal quasichemical activity coefficient (UNIQUAC) and The non-random two liquids equation (NRTL) were used to correlate the phase equilibrium in the system using the interaction parameters determined from experimental data. It is found that UNIQUAC and NRTL used for LLE could provide a good correlation. Distribution coefficients, separation factors, and selectivity were evaluated for the immiscibility region.     

Liquid–liquid equilibria for pseudo-ternary systems: (Sulfolane + 2-ethoxyethanol) + octane + toluene at 293.15 K

Liquid–liquid equilibrium data, both binodal and tie lines are presented for the pseudo-ternary systems: {(sulfolane + 2-ethoxyethano) (1) + octane (2) + toluene (3)} at 293.15 K. The experimental liquid–liquid equilibrium data have been correlated using NRTL and UNIQUAC models, and the binary interaction parameters of these components have been presented. The correlated tie lines have been compared with the experimental data. The comparisons indicate that both NRTL and UNIQUAC models satisfactorily correlated the equilibrium compositions. The tie-line data of the studied systems also were correlated using the Hand method.     

Determination and correlation of liquid–liquid equilibria for the (water + carboxylic acid + dimethyl maleate) ternary systems at T = 298.2 K

(Liquid–liquid) equilibrium (LLE) data for the ternary systems of {water + carboxylic acid (formic, acetic, propionic or butyric acid) + dimethyl maleate} were measured at T = 298.2 K and atmospheric pressure. Selectivity values for solvent separation efficiency were derived from the tie-line data. A comparison of the extracting capabilities of the solvent was made with respect to distribution coefficients, separation factors, and solvent-free selectivity bases. The reliability of the data was ascertained from Othmer–Tobias plots. The experimental data were correlated using the UNIQUAC and NRTL (α = 0.2) equations, and the binary interaction parameters were reported. The phase diagrams for the ternary mixtures including both the experimental and calculated tie-lines were presented.     

(Vapour + liquid) equilibria of the {pentafluoroethane (HFC-125) + dimethyl ether (DME)} system

Binary (vapour + liquid) equilibrium data were measured for the {pentafluoroethane (HFC-125) + dimethyl ether (DME)} system at temperatures from (313.15 to 363.15) K. These experiments were carried out with a circulating-type apparatus with on-line gas chromatography. The experimental data were correlated well by the Peng-Robinson Stryjek-Vera equation of state using the Wong-Sandler mixing rules.