Experimental thermochemical study of the enthalpies of formation and sublimation of isonicotinamide,picolinamide, nicotinamide,isonicotinamideN-oxide,and nicotinamideN-oxide. The dissociation enthalpies of the N–O bonds

The standard (p ^∘  =  0.1MPa) molar enthalpies of combustion in oxygen, at T =  298.15 K, for crystalline picolinamide (2-NH₂COPy), nicotinamide (3-NH₂COPy), isonicotinamide (4-NH₂COPy), nicotinamide N -oxide (3- NH₂COPyNO), and isonicotinamide N - oxide (4-NH₂COPyNO) were measured by static-bomb calorimetry. These values were used to derive the standard molar enthalpies of formation of the crystalline compounds. The standard molar enthalpies of sublimation, at T =  298.15 K, for the three pyridinecarboxamide isomers were measured by microcalorimetry and the standard molar enthalpies of sublimation for the two pyridinecarboxamide N -oxide compounds were measured by a mass-loss effusion technique. From the enthalpies of formation of the gaseous compounds, the molar dissociation enthalpies D_m^oof the (N ⁺ – O ⁻ ) covalent bonds were derived. Comparison has been made with D_m^o(N–O) values in pyridine N -oxide derivatives.     

The C–H bond dissociation enthalpies in fused N-heterocyclic compounds

The C–H bond dissociation enthalpies (BDEs) of the 26 N, O, S-containing mono-heterocyclic compounds were evaluated using the composite high-level ab initio methods G3 and G4. The C–H BDEs for 32 heterocyclic compounds were calculated using 8 types of density functional theory (DFT) methods. Comparing with the experimental values, the BMK method gave the lowest root mean square error (RMSE) of 7.2 kJ/mol. Therefore, the C–H BDEs of N-fused-heterocyclic compounds at different positions were investigated by the BMK method. By NBO analysis two linear relationships between the C–H BDEs of quinoline and isoquinoline with natural charges qC/e in molecules and with natural charges qC/e in radicals were found. The substituent effects on C_(α)–H BDEs in N-fused-heterocyclic compounds were also discussed. It was found that there are two linear relationships between the C_(α)–H BDEs of quinoline and isoquinoline derivatives with natural charges qC_(α)/e for the EDGs and CEGs substituents.     

Effect of temperature on the dilution enthalpies of α,ω-amino acids in aqueous solutions

Dilution enthalpies of aqueous solutions of 3-amino propanoic acid, 4-amino butanoic acid, 5-amino pentanoic acid, and 6-amino hexanoic acid were determined at T = (293.15, 298.15, 303.15, and 308.15) K using an LKB flow microcalorimeter. The homotactic interaction coefficients were obtained according to the McMillan–Mayer theory from the experimental data. For all the systems studied, the dilution of α,ω-amino acids in water is an exothermic process; the pair coefficients have positive values which increases with chain length. The obtained values of the interaction coefficients are interpreted in terms of solute–solvent and solute–solute interactions and are used as indicative of hydrophobic behavior of the amino acid studied.     

The SAMPL5 host–guest challenge: computing binding free energies and enthalpies from explicit solvent simulations by the attach-pull-release (APR) method

The absolute binding free energies and binding enthalpies of twelve host–guest systems in the SAMPL5 blind challenge were computed using our attach-pull-release (APR) approach. This method has previously shown good correlations between experimental and calculated binding data in retrospective studies of cucurbit[7]uril (CB7) and β-cyclodextrin (βCD) systems. In the present work, the computed binding free energies for host octa acid (OA or OAH) and tetra-endo-methyl octa-acid (TEMOA or OAMe) with guests are in good agreement with prospective experimental data, with a coefficient of determination (R²) of 0.8 and root-mean-squared error of 1.7 kcal/mol using the TIP3P water model. The binding enthalpy calculations achieve moderate correlations, with R² of 0.5 and RMSE of 2.5 kcal/mol, for TIP3P water. Calculations using the newly developed OPC water model also show good performance. Furthermore, the present calculations semi-quantitatively capture the experimental trend of enthalpy-entropy compensation observed, and successfully predict guests with the strongest and weakest binding affinity. The most populated binding poses of all twelve systems, based on clustering analysis of 750 ns molecular dynamics (MD) trajectories, were extracted and analyzed. Computational methods using MD simulations and explicit solvent models in a rigorous statistical thermodynamic framework, like APR, can generate reasonable predictions of binding thermodynamics. Especially with continuing improvement in simulation force fields, such methods hold the promise of making substantial contributions to hit identification and lead optimization in the drug discovery process.     

The influence of the temperature on the liquid–liquid equilibrium of the ternary system 1-pentanol–ethanol–water

Liquid–liquid equilibrium data for the ternary system 1-pentanol–ethanol–water have been determined experimentally at 25, 50, 85 and 95°C. These results have been correlated simultaneously by the uniquac method obtaining two sets of interaction parameters: one of them independent of the temperature and the other with a linear dependence. Both sets of parameters fit the experimental results well.     

Standard enthalpies of formation of γ-aminobutyric acid and the products of its dissociation in aqueous solution

Heat effects of the dissolution of crystalline γ-aminobutyric acid in water and potassium hydroxide solutions are determined by direct colorimetry at 298.15 K. Standard enthalpies of formation of γ-aminobutyric acid and the products of its dissociation in aqueous solution are calculated.     

Phase equilibria in the palladium-rich part of the Pd–Au–Cu–Sn quaternary system

The solubility of tin in the phases of Pd–Au–Sn and Pd–Cu–Sn ternary systems and a Pd–Au–Cu–Sn quaternary system with a fixed Pd: Au: Cu ratio of 11.1: 1: 4.6 is studied via microstructural, X-ray diffraction, and energy dispersive analysis. It is found that a quaternary alloy in equilibrium with a solid solution based on Pd, Au, and Sn contains a τ₁ compound with structure which is derivative of the In type. It contains ~15 at % Sn and is a solid solution of the same compounds identified earlier in Pd–Au–Sn and Pd–Cu–Sn ternary systems. In addition, a quaternary alloy with a content of 20 at % Sn also contains a τ₂ compound with the Pd₂CuSn own type and can barely dissolve gold. The obtained data are used to construct a three-dimensional model of the Pd-rich part of the isothermal tetrahedron of the Pd–Au–Cu–Sn system and diagrams of the tin solubility isolines in palladium-rich alloys of the quaternary system at 500°С.     

Formation of the layering boundary in the water–benzene–perfluorobenzene system

The dynamics of the interface between liquid phases in the water–benzene–perfluorobenzene system was studied in a natural experiment. The interfacial tension was found to depend on the density of the organic layer. The range of interfacial tensions in which inversion of the organic and aqueous phases takes place was determined, and the working range of a separating flask as an element of the separation scheme for the mixture was revealed.     

The estimation of ether’s enthalpies of formation

Taking hydrocarbon as gerneratrix, the differences of enthalpies of formation of ether and their corresponding generatrixes were compared and concluded and the equation to estimate ether’s enthalpy of formation, which was Δ_f H _e^°/(kJ/mol) = K(Δ_f H _m^ℴ − 90 + A) was obtained. The results can be elucidated with bond dissociation energies data, bond-enthalpy of formation method, induction effect and conjugative effect. The more essential account to explain the results can be got by using quantum chemistry theories, etc. Using replacement and comparison method, the way of estimation of organic compounds’ thermodynamic properties including enthalpy of formation can be obtained either. The article is published in the original.     

Kinetic analysis of the crystallization processes in the glasses of the Bi–As–S system

Kinetic analysis of the crystallization process in Bi₄(As₂S₃)₉₆ and Bi₆(As₂S₃)₉₄ glasses was performed based on DSC curves recorded under non-isothermal measurement conditions. Samples were thermally treated at different heating rates in the temperature range 300?C770?K. The activation energy of crystallization E and the pre-exponential factor K ₀ are determined by the Kissinger method and the characteristic crystallization parameters m and n of investigated glasses by the Matusita method. For both crystallization processes the glass with 4 at.% of Bi is characterized by the mechanism of volume nucleation, which is manifested in the form of two-dimensional growth at the first crystallization process, and as three-dimensional at the second one. On the other hand, in the sample with 6 at.% Bi, the average value of the parameter m is close to one, which indicates one-dimensional crystal growth. Compatibility of the values of the parameters m and n suggests that this sample has a large number of crystallization centers, which do not increase significantly during the thermal treatment.     

New Phase in the Bi–Sr–Ca–Cu–O System

Cooling a melt of a Bi–Sr–Ca–Cu–O system (Bi:Sr:Ca:Cu = 4:3:3:4 or 2:2:2:4) from 1000°C-1050°C yielded crystals of a new red-colored nonsuperconducting phase, accompanying the superconducting 2212 and 2201 phases. Based on the EPR spectra, it was concluded that copper is univalent in this compound. The new phase has a composition Bi_2.2Sr_1.6Ca_1.3Cu₂Ox. The X-ray diffraction pattern has been indexed, and the unit cell parameters of the phase have been determined: space group P2/m, a = 12.93, b = 4.55, c = 10.94 ; = 102.72°.     

On the kinetics of pozzolanic reaction in the system kaolin–lime–water

The kinetics of the pozzolanic reaction of enriched kaolin from the “Senovo” deposit (Bulgaria) with lime is the object of this article. The kaolin contains kaolinite as a major clay mineral as well as admixtures of quartz and illite. The experimental data of pozzolanic activity at temperatures of 100 and 23 °C are obtained for different reaction times. The reaction degrees of kaolinite and lime at 100 °C are determined from the pozzolanic activity data using a powder X-ray diffraction analysis. The kinetic analysis is performed by joint presentation of theoretical and experimental data in dimensionless coordinates having in mind the influence of particle size distribution on the reaction rate. It is found by the kinetic analysis that the rate of entire reaction is limited by the rate of chemical reaction on the reaction surface up to degree of reaction near to 0.4. The rate of penetration of the chemical reaction into the kaolinite particles for this area—from the beginning to degree of reaction 0.4, is determined to be equal to 2.10⁻¹¹ m/s.     

Thermal Studies of the Hardening of the Systems Calcium Silicates–Electrolyte–Water

Thermal studies, sometimes together with X-ray analysis, were applied to investigate the process of hydration in the systems calcium silicates (tricalcium silicate or dicalcium silicate) - water - electrolyte. Alkali metal or alkaline-earth metal salts were used as electrolytes. Results and conclusions are presented concerning the action of electrolytes upon the kinetics of hardening of the calcium silicates and the composition and phase transformation of calcium hydrosilicate in the presence of low proportions of electrolytes (0.5, 2 and 5 mass%), these effects being due to ionic substitution. A higher proportion of electrolyte (above 2%) in the systems calcium silicate-water can determine the formation of a complex salt, e.g. calcium hydroxysalts or double hydrosilicates. This revised version was published online in August 2006 with corrections to the Cover Date.     

On the Nature of the Cherdyntsev–Chalov Effect

It is shown that the Cherdyntsev–Chalov effect, usually presented as the separation of even isotopes of uranium upon their transition from the solid to the liquid phase, can include initiated acceleration of the radioactive decay of uranium-238 nuclei during the formation of cracks in geologically (seismic and volcanically) active zones of the Earth’s crust. The fissuring of the solid-phase medium leads to an increase in mechanical tensile stress and the emergence of strong local electric fields, resulting in the injection of chemical-scale high-energy electrons into the aqueous phase of the cracks. Under these conditions, the e^? catalytic decay of uranium-238 nucleus studied earlier can occur during the formation of metastable protactinium-238 nuclei with locally distorted nucleon structure, which subequently undergo β^–decay with the formation of thorium-234 and helium-4 nuclei as products of the fission of the initial uranium-238 nucleus with a characteristic period of several years. The observed increased activity of uranium-234 nuclei that form during the subsequent β-decay of thorium and then protactinium is associated with the initiated fission of uranium-238. The possibility is discussed of developing thermal power by using existing wastes from uranium production that contain uranium-238 to activate this isotope through the mechanochemical processing of these wastes in aqueous media with the formation of ₉₁ ²³⁸ Pa _isu , the half-life of which is several years.     

Dependence of the solution and transfer enthalpies of DL-α-alanyl-DL-α-asparagine on the composition of water-amide binary solvents at 298.15 K

Solution enthalpies of DL-α-alanyl-DL-α-asparagine (AlaAsn) in water-formamide, water-N-methylformamide, water-N,N-dimethylformamide, and water-N,N-dimethylacetamide mixtures were measured in the range of amide mole fractions x ₂ = 0–0.3. The standard enthalpies of solution (Δ_sol H°) and transfer (Δ_tr H°) of AlaAsn from water to the binary solvent and enthalpy coefficients of pair-wise interactions (h _xy ) of AlaAsn with amide molecules were calculated. The influence of the composition of the water-organic mixture on the enthalpy characteristics of AlaAsn is discussed. It is shown that the enthalpy characteristics of solution and transfer of AlaAsn are related to the structure of amides.     

Experimental investigation of the Nd–Al–Si system

The isothermal section of the Nd–Al–Si ternary system at 500 °C has been investigated using differential thermal analysis, X-ray diffraction analysis, scanning electron microscopy and electron micro-probe analysis. Four ternary intermetallic compounds were confirmed: NdAl₂Si₂ (τ₁), hP5-CaLa₂O₂ structure type, Nd₂Al₃Si (τ₂), hP3-AlB₂ structure type, NdAl_1−x Si_1+x , 0.25 ≤ x ≤ 0.3 (τ₃), tI12-αThSi₂ structure type and Nd₂Al_1−x Si_1+x , 0 ≤ x ≤ 0.2, (τ₅), oS8-CrB structure type. A new ternary intermetallic phase (τ₄) was found: Nd₄Al₃Si₃, orthorhombic oS20, isotypic with Pr₄Al₃Ge₃.     

Protein–emulsifier interactions at the air–water interface

The main interfacial physico-chemical characteristics and the kinetics of the formation of protein and emulsifier mixed films at the air–water interface are reviewed. Recent advances include the development of new molecular resolution and spectroscopic techniques coupled with surface rheological instruments and the incipient development of computer simulation of the displacement of proteins by emulsifiers.