Phase equilibria of imidazolium ionic liquids and the refrigerant gas, 1,1,1,2-tetrafluoroethane (R-134a)

A number of applications with ionic liquids (ILs) and hydrofluorocarbon gases have recently been proposed. Detailed phase equilibria and modeling are needed for their further development. In this work, vapor–liquid equilibrium, vapor–liquid–liquid equilibrium, and mixture critical points of imidazolium ionic liquids with the hydrofluorocarbon refrigerant gas, 1,1,1,2-tetrafluoroethane (R-134a) was measured at temperatures of 25 °C, 50 °C, 75 °C and pressure up to 143 bar. The ionic liquids include 1-hexyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)amide ([HMIm][Tf₂N]), 1-hexyl-3-methyl-imidazolium hexafluorophosphate ([HMIm][PF₆]), and 1-hexyl-3-methyl-imidazolium tetrafluoroborate ([HMIm][BF₄]). The effects of the anion and cation on the solubility were investigated with the anion having greatest impact. [HMIm][Tf₂N] demonstrated the highest solubility of R-134a. The volume expansion and molar volume were also measured for the ILs and R-134a. The Peng–Robinson Equation of State with van der Waals 2-parameter mixing rule with estimated IL critical points were employed to model and correlate the experimental data. The models predict the vapor–liquid equilibrium and vapor–liquid–liquid equilibrium pressure very well. However, the mixture critical points predictions are consistently lower than experimental values.     

Dramatic Change in Viscosities of Pure Ionic Liquids upon Addition of Molecular Solvents

Viscosities of binary mixtures of pyridinium based ionic liquids (1-butyl pyridinium tetrafluoroborate, [BP][BF₄], 1-butyl 3-methyl pyridinium tetrafluoroborate [3-MBP][BF₄], 1-butyl 4-methyl pyridinium tetrafluoroborate, [4-MBP][BF₄]), and phosphonium based ionic liquids, (tetrabutyl phosphonium alaninate, [TBP][Ala]; tetrabutyl phosphonium valinate, [TBP][Val]) with the molecular solvents, water, methanol and dichloromethane, have been measured at 298.15 K. A Brookfield ultra-rheometer was employed to measure the reported viscosities. The drop in viscosity in the close vicinity of pure ionic liquid is more prominent in polar solvents like water compared to less polar solvents. The temperature dependence of this observation was also studied for binary mixtures of [4-MBP][BF₄] with water in range of 298.15–323.15 K. The Vogel-Fulcher-Tamman (VFT) equation was employed to investigate the temperature dependence of the viscosities of pure pyridinium-based ionic liquids in the temperature range from 298.15–323.15 K.     

Application of novel room temperature ionic liquids in flexible supercapacitors

This paper studied application of different types of room temperature ionic liquids (RTILs) into flexible supercapacitors. Typical RTILs including 1-buthyl-3-methyl-imidazolium [BMIM][Cl], trioctylmethylammonium bis(trifluoromethylsulfonyl)imide [OMA][TFSI] and triethylsulfonium bis(trifluoromethylsulfonyl)imide ([SET₃][TFSI]) were studied. [SET₃][TFSI] shows the best result as electrolyte in electrochemical double-layer (EDLC) supercapacitors with very high specific capacitance of 244 F/g at room temperature, overceiling the performance of conventional carbonate electrolyte such as dimethyl carbonate (DMC) with more stable performance and much larger electrochemical window.     

Homogeneous catalytic aminocarbonylation of iodoalkenes and iodobenzene with amino acid esters under conventional conditions and in ionic liquids

Amino acid methyl esters were used as amine nucleophiles in palladium catalysed aminocarbonylation of iodobenzene and iodoalkenes (1-iodo-cyclohexene and 17-iodo-androst-16-ene). 2-Oxo-carboxamide type derivatives can be isolated as a result of double CO insertion by using iodobenzene as a substrate at elevated carbon monoxide pressure. On the contrary, carboxamides of expected structure were obtained exclusively in excellent yields in the whole pressure range by using iodoalkenes. The aminocarbonylation of 17-iodo-androst-16-ene in [bmim][PF₆] or [bmim][BF₄] (where bmim=1-butyl-3-methyl-imidazolium cation) ionic liquids was also carried out and the ionic liquid-catalyst mixtures have been reused several times with only a small loss of activity.     

The Synthesis of Anatase TiO2 Nanoparticles by Solvothermal Method using Ionic Liquid as Additive

The solvothermal reactions of Ti(OiPr)₄ in alcohol using ionic liquid as additive were investigated. In the presence of [BMIM][Cl], [BMIM][Br], [BMIM][NTf₂], [BMIM][SO₃Me], [BMIM][SO₄Me], or [BMIM][OTf] (BMIM = 1‐Butyl‐3‐methylimidazolium), pure anatase nanoparticles were obtained. The controlled hydrolysis of Ti(OiPr)₄ in the presence of ionic liquids to form titanium oxo clusters plays a key role in the formation of anatase nanostructures, and ionic liquids can be repeatedly used to synthesise anatase nanoparticles. However, in the presence of [BMIM][PF₆], [BMIM]₂[Ti(OH)₆] was obtained by an anion exchange reaction.     

Solvent relaxation of a room-temperature ionic liquid [bmim][PF6] confined in a ternary microemulsion

In this paper we have reported the solvent and rotational relaxation of 1-butyl-3-methyl-imidazolium hexafluorophosphate ([bmim][PF₆]) confined in tween 20/([bmim][PF₆]/water microemulsion using coumarin 153 (C-153) as probe. The most interesting feature of our experiment was that we observed an increase in solvent relaxation time with increase in R (R = tween 20-to-[bmim][PF₆] molar ratio). This is due to the fact that with increase in [bmim][PF₆] content of the microemulsions, the microviscosity of the pool of the microemulsions increases, and motion of ions of [bmim][PF₆] is hindered in the pool of microemulsions. Since motion of ions is responsible for solvation in room-temperature ionic liquids (RTILs), solvent-relaxation time increases with increase in R.     

Molecular dynamics simulation studies of the influence of imidazolium structure on the properties of imidazolium/azide ionic liquids

Atomistic molecular dynamics simulations were performed on 1-butyl-3-methyl-imidazolium azide [bmim][N(3)], 1-butyl-2,3-dimethylimidazolium azide [bmmim][N(3)], and 1-butynyl-3-methyl-imidazolium azide [bumim][N(3)] ionic liquids. The many-body polarizable APPLE&P force field was augmented with parameters for the azide anion and the bumim cation. Good agreement between the experimentally determined and simulated crystal structure of [bumim][N(3)] as well as the liquid-state density and ionic conductivity of [bmmim][N(3)] were found. Methylation of bmim (yielding bmmim) resulted in dramatic changes in ion structuring in the liquid and slowing of ion motion. Conversely, replacing the butyl group of bmim with the smaller 2-butynyl group resulted in an increase of ion dynamics.     

Study on the Conductivities of Pure and Aqueous Bromide-Based Ionic Liquids at Different Temperatures

Electrical conductivities were measured for the pure ionic liquids [C₆mim][Br] (1-hexyl-3-methylimidazolium bromide) and [C₈mim][Br] (1-octyl-3-methylimidazolium bromide) at 0.1 MPa from 293.15 to 333.15 K. Conductivity measurements were also made for the binary water + [C₆mim][Br] and water + [C₈mim][Br] systems and their ternary water + [C₆mim][Br] + [C₈mim][Br] system at 0.1 MPa and 293.15, 298.15, and 303.15 K. The conductivity data of the pure ionic liquids were correlated by the VFT (Vogel-Tamman-Fulcher) equation, and the fitting parameters and mean absolute deviations were determined. New explanations are presented for the molality-dependent behavior of the conductivity of the binary water + [C₆mim][Br] and water + [C₈mim][Br] systems. The generalized Young’s rule and the semi-ideal solution theory for conductivity were used to predict the conductivities of the ternary water + [C₆mim][Br] + [C₈mim][Br] system from the conductivities of its corresponding binary water + [C₆mim][Br] and water + [C₈mim][Br] subsystems. The predictions are in good agreement with the measured values.     

Physico-chemical Properties of Binary and Ternary Mixtures of Ethyl Acetate + Ethanol + 1-Butyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide at 298.15 K and Atmospheric Pressure

Densities, viscosities and refractive indices have been measured at 298.15 K and atmospheric pressure for binary and ternary mixtures of ethanol, ethyl acetate and 1-butyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl) imide [C₄mim][NTF₂]. From these experimental properties, the corresponding excess properties have been calculated and adequately fitted with the Redlich-Kister polynomial equation. The adjustable parameters and standard deviations between experimental and calculated values are reported. Interest of this mixture is due to the possibility of using [C₄mim][NTF₂] as an entrainer in the extractive distillation of ethanol + ethyl acetate. These results are compared with previously determined experimental data for mixtures of ethyl acetate and/or ethanol with the ionic liquid 1-octyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide, [C₈mim][NTF₂].     

Bicyclic imidazolium-based ionic liquids: synthesis and characterization

We previously reported the use of imidazole as starting compound for preparing a bicyclic imidazolium ionic liquid, [b-3C-im][NTf₂], with an overall 29% isolated yield in four synthetic steps. This new room temperature ionic liquid was shown to be far more chemically stable than commonly used [bmim][PF₆], [bdmim][PF₆], and [bdmim][NTf₂]. Because of this intriguing chemical stability, it prompted us to develop a more generalized and high yielding synthesis so that molecular diversity of bicyclic ionic liquids may be explored. In this work, we amended the previous synthetic route by employing 4-chlorobutyronitrile or 5-chlorovaleronitrile as starting materials and successfully developed a five-step synthesis of a series of novel bicyclic imidazolium-based ionic liquids in 40-53% overall isolated yields. We investigated intrinsic reactivity of all bicyclic ionic liquids prepared and found that, under strongly basic conditions, among all tested ionic liquids the 5,5-membered [R-3C-im][NTf₂] ionic liquids were most stable to solvent deuterium isotope exchange while the previously reported [bdmim][NTf₂] ionic liquid was 50% deuterium exchanged at its C-2 methyl in 30 min at ambient temperature. Under identical condition, the commonly used [bmim][NTf₂] ionic liquid was deuterium exchanged instantaneously at its C-2 hydrogen. In the absence of bases, only [bmim][PF₆] was deuterium exchanged (50% within 1 h) and all other ionic liquids gave no detectable exchanges even after 25 days at ambient temperature. Moreover, both [bmim][NTf₂] and [bdmim][NTf₂] ionic liquids were readily methylated at C-2 position with methyl iodide under basic condition at room temperature. Under the same condition, [R-3C-im][NTf₂] and [R-4C-im][NTf₂] ionic liquids were completely stable and chemically inert. We envisioned that [R-3C-im][NTf₂] should be well suited as solvents for organic synthesis.     

(Vapour + liquid) equilibria of ternary systems with ionic liquids using headspace gas chromatography

(Vapour + liquid) equilibrium (VLE) data for the ternary systems (hexane + benzene), (hexane + cyclohexane), (benzene + cyclohexane), and (ethanol + water) with an ionic liquid as entrainer for extractive distillation were measured by headspace gas chromatography. As ionic liquids, 1-hexyl-3-methyl-imidazolium bis (trifluoromethyl-sulfonyl) imide [HMIM][BTI], 1-octyl-3-methyl-imidazolium bis (trifluoromethyl-sulfonyl) imide [OMIM][BTI], 1-octyl-3-methyl-imidazolium trifluoro-methanesulfonate [OMIM][OTF], and 1-butyl-3-methyl-imidazolium trifluoro-methanesulfonate [BMIM][OTF] were used. The experimental data show that the ionic liquids investigated have a great influence on the separation factors of the systems (hexane + benzene), (hexane + cyclohexane), and (benzene + cyclohexane). The experimental data were compared with the predicted results using mod. UNIFAC (Do). The predicted results are in good agreement with the experimental data.     

1-Butyl-2,3-trimethyleneimidazolium bis(trifluoromethylsulfonyl)imide ([b-3C-im][NTf2]): a new, stable ionic liquid

Using imidazole as the starting material, the synthesis of a new bicyclic ionic liquid [b-3C-im][NTf₂] is described. Except for the alkylation reaction in the second step (40% yield) of this four-step synthesis of [b-3C-im][NTf₂], others were all high yielding reactions (85-94% isolated yields). We investigated intrinsic reactivity of this and other imidazolium-based ionic liquids and found that, under strongly basic conditions (KOD in CD₃OD/D₂O (1:1) solution), the new ionic liquid was stable to solvent deuterium isotope exchange while the previously reported [bdmim][NTf₂] and [bdmim][PF₆] ionic liquids were 50% deuterium exchanged at its C-2 methyl in 30 min at ambient temperature. At the same experimental condition, the most commonly employed [bmim][PF₆] ionic liquid was deuterium exchanged instantaneously at its C-2 hydrogen. In the absence of bases (CD₃OD/D₂O = 1:1), only [bmim][PF₆] was deuterium exchanged (50% within 1 h) and other ionic liquids gave no detectable exchanges even after one week at ambient temperature. It is therefore concluded that the new [b-3C-im][NTf₂] ionic liquid is far more chemically stable than previously reported [bmim][PF₆], [bdmim][NTf₂], and [bdmim][PF₆].     

Thermodynamic modeling of hydrogen sulfide solubility in ionic liquids using modified SAFT-VR and PC-SAFT equations of state

Equations of state based on the statistical associating fluid theory for potentials of variable range (SAFT-VR) and the perturbed chain statistical associating fluid theory (PC-SAFT) have been used to model the PVT behavior of ionic liquids and the solubility of H₂S in six imidazolium-based ionic liquids. The studied systems included [bmim][PF6], [hmim][PF6], [bmim][BF4], [hmim][BF4], [bmim][NTF2] and [hmim][NTF2] at various temperatures and pressures.For pure components, parameters of the models have been obtained by fitting the models to experimental data on liquid densities; the average relative deviation between the calculated and experimental densities for ionic liquids is less than 2.42% in the PC-SAFT model and 5.44% in the SAFT-VR approach, the latter which incorporates the square-well potential for short-range interactions. In both models an additional term has been added to account for dipole-dipole interactions between solute molecules resulting from the permanent charges on the chain molecules of the solvents. The model parameters have also been correlated as functions of the molecular weight of the solvents. For binary mixtures of ionic liquids and H₂S, the association interactions between H₂S molecules and between the ionic liquids and H₂S molecules have also been taken into account in both approaches, using binary interaction coefficients. The results show an average deviation of less than 5% in the calculation of the mole fraction of H₂S in the ionic liquids. The effect of inclusion of the polar term has been studied for binary systems in both models.     

X‐ray Photoelectron Spectroscopy of Pyridinium‐Based Ionic Liquids: Comparison to Imidazolium‐ and Pyrrolidinium‐Based Analogues

We investigate eight 1‐alkylpyridinium‐based ionic liquids of the form [C_nPy][A] by using X‐ray photoelectron spectroscopy (XPS). The electronic environment of each element of the ionic liquids is analyzed. In particular, a reliable fitting model is developed for the C 1s region that applies to each of the ionic liquids. This model allows the accurate charge correction of binding energies and the determination of reliable and reproducible binding energies for each ionic liquid. Shake‐up/off phenomena are determinedfor both C 1s and N 1s spectra. The electronic interaction between cations and anions is investigated for both simple ionic liquids and an example of an ionic‐liquid mixture; the effect of the anion on the electronic environment of the cation is also explored. Throughout the study, a detailed comparison is made between [C₈Py][A] and analogues including 1‐octyl‐1‐methylpyrrolidinium‐ ([C₈C₁Pyrr][A]), and 1‐octyl‐3‐methylimidazolium‐ ([C₈C₁Im][A]) based samples, where X is common to all ionic liquids.     

Density and viscosity of pyridinium-based ionic liquids and their binary mixtures with water at several temperatures

Densities and viscosities of two pyridinium-based ionic liquids, 1-butylpyridinium tetrafluoroborate [BuPy][BF₄] and 1-octylpyridinium tetrafluoroborate [OcPy][BF₄], and their binaries with water at atmospheric pressure and temperatures from (283.15 to 348.15) K were determined. The densities and viscosities of pure ionic liquids were correlated successfully by empirical equations. The Vogel–Fulcher–Tammann equations can fit the experimental viscosities for pure and binary of both IL systems. Excess molar volume and viscosity deviation were calculated for the binaries. The excess molar volumes have positive deviation from ideal solution while the viscosity deviations have negative values.     

Synthesis of fused tetrahydro-β-carbolinequinoxalinones in 1-n-butyl-2,3-dimethylimidazolium bis(trifluoromethylsulfonyl)imide ([bdmim][Tf2N]) and 1-n-butyl-2,3-dimethylimidazolium perfluorobutylsulfonate ([bdmim][PFBuSO3]) ionic liquids

Starting from tryptophan methyl ester, a three-step synthesis of fused tetrahydro-β-carbolinequinoxalinones in two new ionic liquids, [bdmim][Tf₂N] and [bdmim][PFBuSO₃], was described. Both ionic liquids can be readily prepared from commercially available starting materials in high yields. Unlike the commonly used [PF₆]-based ionic liquids that evidently undergo slow hydrolysis of the PF₆ anion with the concomitant release of HF, ionic liquids of [bdmim][Tf₂N] and [bdmim][PFBuSO₃] are not only chemically stable but also apparently inert to hydrolysis and therefore organic reactions carried out in both ionic liquids proceed smoothly with good yields. The overall isolated yields for this three-step synthesis of tetrahydro-β-carbolinequinoxalinones were 34-55%. To the best of our knowledge, the preparation of fused tetrahydro-β-carbolinequinoxalinones was unprecedented.     

新型离子液体介质中长链烯烃氢甲酰化反应

合成和表征了离子液体[Rmim][p-CH3C6H4SO3](R=CH3(CH2)n—, n=3, 7, 11, 15), 并以所合成的离子液体为反应介质, 考察了水溶性铑膦络合物HRh(CO)(TPPTS)3[TPPTS: P(m-C6H4SO3Na)3]对长链烯烃氢甲酰化反应的催化性能. 结果表明, 离子液体[Rmim][p-CH3C6H4SO3]中R基团链长的变化对催化活性具有重要的影响；而在相同离子液体中, 氢甲酰化反应活性随着烯烃链长的增加明显下降. 与文献报道中广泛使用的离子液体[Bmim]BF4、[Bmim]PF6相比, 该催化体系对长链烯烃氢甲酰化反应具有更好的活性和化学选择性, 在3.0 MPa, 100 ℃的条件下, 1-己烯氢甲酰化反应转化频率(TOF)高达2736 h-1. 反应完成后, 水溶性铑膦络合物能很好地溶解在离子液体中, 与有机物自动分层, 催化剂的循环使用易于实现.     

Investigation on solvation and protonation of meso-tetrakis(p-sulfonatophenyl)porphyrin in imidazolium-based ionic liquids by spectroscopic methods

The solvation and protonation of the meso-tetrakis(p-sulfonatophenyl)porphyrin (TPPS) were investigated by spectroscopic methods in pure or mixed imidazolium-based ionic liquids: 1-butyl-3-methyl-imidazolium terafluoroborate ([MBIM]BF₄), 1-butylimidazolium terafluoroborate ([HBIM]BF₄), 1-butyl-imidazolium dodecylalkylbenzenesulfonate ([HBIM]DS), 1-butyl-imidazolium p-toluenesulfonate ([HBIM]TS) and 1-butyl-imidazolium methylsulfonate ([HBIM]MS). Compared with absorption properties of TPPS in aqueous solution, Soret band of TPPS monomer was obviously red-shifted in the ionic liquids, while special absorption of TPPS J-aggregates was located at higher energy level, 483 nm and 702 nm, in protonic ionic liquids (PILs) [HBIM]BF₄. Next, the protonation of TPPS in aprotonic ionic liquids (AILs, i.e., [MBIM]BF₄) is dependent not only on the concentration of protonic ionic liquids as proton sources, but also on the characteristic of anion and viscosity of PILs. The proton transfer constants between TPPS and four protonic ionic liquids are (2.32 ± 0.23) × 10² for [HBIM]BF₄, (1.52 ± 0.08) × 10² for [HBIM]MS, (1.12 ± 0.21) × 10² for [HBIM]DS and (0.84 ± 0.45) × 10² for [HBIM]TS, respectively.     

Comparative Investigation of the Ionicity of Aprotic and Protic Ionic Liquids in Molecular Solvents by using Conductometry and NMR Spectroscopy

Electrical conductivity (σ), viscosity (η), and self‐diffusion coefficient (D) measurements of binary mixtures of aprotic and protic imidazolium‐based ionic liquids with water, dimethyl sulfoxide, and ethylene glycol were measured from 293.15 to 323.15 K. The temperature dependence study reveals typical Arrhenius behavior. The ionicities of aprotic ionic liquids were observed to be higher than those of protic ionic liquids in these solvents. The aprotic ionic liquid, 1‐butyl‐3‐methylimidazolium tetrafluoroborate, [bmIm][BF₄], displays 100 % ionicity in both water and ethylene glycol. The protic ionic liquids in both water and ethylene glycol are classed as good ionic candidates, whereas in DMSO they are classed as having a poor ionic nature. The solvation dynamics of the ionic species of the ionic liquids are illustrated on the basis of the ¹H NMR chemical shifts of the ionic liquids. The self‐diffusion coefficients D of the cation and anion of [HmIm][CH₃COO] in D₂O and in [D₆]DMSO are determined by using ¹H nuclei with pulsed field gradient spin‐echo NMR spectroscopy.     

离子液体型表面活性剂研究

以1-甲基咪唑为原料, 制备了6个常规离子液体: 1-正丁基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[bmim][BF₄]及[bmim][PF₆])、1-正己基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[hmim][BF₄]及[hmim][PF₆])、1-正十六烷基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[C₁₆mim][BF₄]及[C₁₆mim][PF₆])和4个功能化离子液体: 1-(2-羟乙基)-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[2-hemim][BF₄]及[2-hemim][PF₆])、1-乙氧羰基甲基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[eocmmim][BF₄]及[eocmmim][PF₆]). 研究了这两类离子液体的一些物理性能, 旨在挖掘离子液体在香料香精化妆品工业中的应用价值. 分别检测了它们与一般溶剂的互溶性, 并测定了它们的表面张力和发泡性能, 实验结果表明, 仅[C₁₆mim][BF₄]和[C₁₆mim][PF₆]具有发泡性能, 发泡力分别为68和120 mm.