Charge density-dependent coil–globule transition of alkali metal polycarboxylates in aqueous organic solvent mixtures

The effects of polymer charge density on the counterion-specific and solvent-specific coil–globule transition of polycarboxylates were investigated for alkali metal salts of poly(styrene-alt-maleic acid) (PSaltMA) and poly(acrylic acid) (PAA) in aqueous organic solvent mixtures. The order of the transition region, namely, the counterion specificity for the transition in, e.g., aqueous dimethyl sulfoxide (DMSO), was the same for both polyelectrolytes, Na⁺?>?K⁺?>?Cs⁺?>?Li⁺, while the discrepancy of the transition region between Na⁺ and Li⁺ systems was appreciably narrower for PSaltMA (approximately 20 vol%) than that of PAA (approximately 29 vol%). Such diminished counterion specificity for the former was ascribed to the nonuniform charge array. Namely, PSaltMA has two kinds of nearest charge arrays, one is the shorter spacing between the maleic acid carboxyl groups and the other is the longer one via one styrene group. Thus, the former may be favorable for binding of the smaller counterion (i.e., Li⁺) and the latter for the larger one (Cs⁺). Such a “size-fitting effect” for the counterion binding was in fact further confirmed with variously neutralized PAAs. For example, the counterion specificity in aqueous DMSO of PAA40 that was neutralized to 40 % was Cs⁺?>?K⁺?>?Na⁺?>?Li⁺, showing that the largest counterion becomes most favorable in inducing the transition with increasing average charge spacing. In fact, the nuclear magnetic resonance line width measurement for ¹³³Cs suggested that the counterion binding strength of the large counterion for PAA increases with decreasing charge density from 100 to 40 % neutralization.     

Solid–liquid phase equilibrium and mixing thermodynamic analysis of coumarin in binary solvent mixtures

The solubility of coumarin in three aqueous solvent mixtures (methanol + water, ethanol + water and acetone + water) was experimentally determined by a gravimetric method at atmospheric pressure. The experimental solubility data were fitted using the modified Apelblat equation, non-random two-liquid (NRTL) equation, the combined nearly ideal binary solvent/Redlich–Kister equation and the Jouyban?Acree equation, respectively. All the equations were proven to be able to correlate the experimental data, and the modified Apelblat equation could obtain better correlation results than the other three models. The solubility of coumarin increases with increase in temperature. At the same temperature, the solubility increases with increase in mole fraction of organic solvents except for the ethanol–water system which shows a unimodal curve. In addition, the apparent thermodynamic properties of the mixing process were calculated based on the NRTL model and the experimental solubility data.     

Study of complex formation between La+3, Ce+3 and Y3+ cations with some 18-membered crown ethers in methanol–water and methanol–acetonitrile binary mixtures

The complexation reactions between some rare earth metal cations (Ln; Y³⁺, La³⁺ and Ce³⁺) with 18-crown-6 (18C6), dicyclohexyl-18-crown-6 (DC18C6), benzo-18-crown-6 (B18C6) and decyl-18-crown-6 (Dec18C6), have been studied in methanol–acetonitrile (MeOH–AN) and methanol–water (MeOH–H₂O) binary mixtures using a competitive spectrophotometric method. 2-(2-thiazolylazo)-4-methyl phenol (TAC or L) was used as colorimetric complexant. It was found that the selectivity order of TAC for Ln cations is highly changed with changing the composition of the mixed solvents. Moreover, as the concentration of acetonitrile increases in MeOH–AN binary mixture, the stability of Ln–TAC complexes increases and passes through a maximum at a certain mole fraction of acetonitrile. In addition, the stability of Ln–crown ether complexes increases with increasing the concentration of methanol in MeOH–H₂O and acetonitrile in MeOH–AN binary solutions. A non linear behaviour was observed for variation of stability constants of all complexes versus the composition of the mixed solvents. The results show that 18C6 generally forms more stable complexes with La³⁺ and Ce³⁺ cations than DC18C6 in methanol and MeOH–H₂O binary mixtures, while this sequence is reversed in the methanol-acetonitrile binary mixtures which are rich with respect to acetonitrile.     

Fluorescence characterization of metal ion–humic acid interactions in soils amended with composted municipal solid wastes

Fluorescence spectroscopy has been used to probe the structural properties and Cu(II), Zn(II), Cd(II), and Pb(II)-binding behavior of humic acid (HA)-like fractions isolated from a municipal solid waste compost (MSWC) and HAs from unamended and MSWC-amended soils. The main feature of the fluorescence spectra, in the form of emission-excitation matrix (EEM) plots, was a broad peak with the maximum centered at an excitation/emission wavelength pair that was much shorter (340/437 nm) for MSWC-HA than for unamended and MSWC-amended soil HAs (455/513 and 455/512 nm, respectively). Fluorescence intensity for MSWC-amended soil HA was less than that for unamended soil HA. These results were indicative of more aromatic ring polycondensation and humification of soil HAs, and of partial incorporation of simple and low-humified components of MSWC-HA into native soil HA, as a result of MSWC amendment. Titrations of HAs with Cu(II), Zn(II), Cd(II), and Pb(II) ions at pH 6 and ionic strength 0.1 mol L⁻¹ resulted in a marked decrease of the fluorescence intensities of untreated HAs. By successfully fitting a single-site fluorescence-quenching model to titration data, the metal ion complexing capacities of each HA and the stability constants of metal ion-HA complexes were obtained. The binding capacities and stability constants of MSWC-HA were smaller than those of the unamended soil HA. Application of MSWC to soil slightly reduced the metal-ion-binding capacities and affinities of soil HAs.     

Solute—solvent interactions: dissolution of sparingly soluble silver salts of dibasic and tribasic inorganic and organic acids in water + acetic acid mixtures

Values for the solubilities of salts Ag₂X (where X is sulphate, chromate, tungstate, dichromate, oxalate, malonate, succinate, glutarate, or adipate) and Ag₃Y (where Y is phosphate, arsenate or ferrioxalate) in four different compositions of water + acetic acid (10, 20, 40 and 60 wt.% acid) have been determined at 25°C. Solubility data are discussed in the light of electrostatic and solute—solvent interaction effects on the dissolution processes of the silver salts.     

Study on the complexation of isoquercitrin with β-cyclodextrin and its derivatives by spectroscopy

The inclusion complexes of isoquercitrin (IQ) with cyclodextrins (CDs) including β-cyclodextrin (β-CD), hydroxypropyl-β-cyclodextrin (HP-β-CD) and dimethyl-β-cyclodextrin (DM-β-CD) have been investigated using the methods of steady-state fluorescence, UV-vis absorption and induced circular dichroism. The stoichiometric ratio of the three complexes was found to be 1:1 and the stability constants (K) were estimated from spectrofluorometric titrations, as well as the thermodynamic parameters. Maximum inclusion ability was measured in the case of DM-β-CD due to the increased hydrophobicity of the host cavity, followed by HP-β-CD and β-CD. The effect of pH on the complexation process was also quantitatively assessed. IQ exists in different molecular forms depending on pH and β-CDs were most suitable for inclusion of the neutral form of IQ. The phase-solubility diagrams obtained with β-CD, HP-β-CD and DM-β-CD were all classical A_L type. And DM-β-CD provided the best solubility enhancement, 12.3-fold increase compared to 2.8- and 7.5-fold increase for β-CD and HP-β-CD. The apparent stability constants obtained from the solubility data at 25 °C were comparable with those obtained from the fluorescence assays. Moreover, ¹H NMR was carried out, which revealed that the IQ favorably inserted into the inner cavity from the chromone part instead of the phenyl part, which was in agreement with molecular modeling studies.     

Proton NMR study of the stoichiometry, stability and thermodynamics of complexation of Rb+ ion with 18-crown-6 in binary dimethylsulfoxide–nitrobenzene mixtures

Proton NMR was used to study the complexation reaction of Rb⁺ ion with 18-crown-6 (18C6) in a number of binary dimethylsulfoxide (DMSO)–nitrobenzene (NB) mixtures at different temperatures. In all cases, the exchange between free and complexed 18C6 was fast on the NMR time scale and only a single population average ¹H signal was observed. The formation constants of the resulting 1:1 complexes in different solvent mixtures were determined by computer fitting of the chemical shift mole ratio data. There is an inverse relationship between the complex stability and the amount of DMSO in the solvent mixtures. The enthalpy and entropy values for the complexation reaction were evaluated from the temperature dependence of formation constants. In all solvent mixtures studied, the resulting complex is enthalpy stabilized but entropy destabilized. The ?H° versus T?S° plot of all thermodynamic data obtained shows a fairly good linear correlation indicating the existence of enthalpy–entropy compensation in the complexation reaction.     

Thermodynamic study for dicyclohexano-24-crown-8 complexes with K+, Rb+, Cs+ and Tl+ ions in binary acetonitrile–nitromethane mixtures by conductometric method

The complexation reactions between dicyclohexano-24-crown-8 (DC24C8) and K⁺, Rb⁺, Cs⁺ and Tl⁺ ions were studied conductometrically in the different acetonitrile-nitromethane mixtures at various temperatures. The formation constants of the resulting 1:1 complexes were calculated from the computer fitting of the molar conductance-mole ratio data at different temperatures. At 25 °C and in all solvent mixtures used, the stability of the resulting complexes varied in order of Tl⁺ > K⁺ > Rb⁺ ~ Cs⁺. The enthalpy and entropy changes of the complexation reactions were evaluated by the temperature dependence of formation constants. It was found that the stability of the resulting complexes increased with increasing nitromethane in the solvent mixture.     

A convenient synthesis of new thiaazacrown ethers and study of their complexation reactions with some transition metal cations in binary acetonitrile–chloroform mixture using the conductometric method

Three novel thiaazacrown ethers 1, 2 and 3 were synthesized in a simple way and in high yield. The complex formation between Ag⁺, Cu²⁺, Zn²⁺, Pb²⁺, Hg²⁺ and Cd²⁺ metal cations with thiaazacrown ethers 1, 2 and 3 have been studied in acetonitrile:chloroform (1:1) binary solvent system using conductometric technique. The conductance data show that the stochiometry of the complexes with Ag⁺, Cu²⁺ and Zn²⁺ cations is 1:1 (L:M), but in the case of Pb²⁺ and Hg²⁺ cations, a 1:2 (L:M) complex is formed in solutions. The formation constants of the resulting 1:1 complexes were determined from the molar conductance-mole ratio data at 25 °C. It was found that the stability constants of 1-Ag²⁺, 2-Ag⁺ and 3-Ag⁺ complexes are higher than those of their corresponding Zn²⁺ and Cu²⁺ complexes and found to vary in order 3 > 1 > 2 for Ag⁺.     

Cation···π interactions: QTAIM and NBO studies on the interaction of alkali metal cations with heteroaromatic rings

The cation···π interactions of alkali metal cations (Li⁺, Na⁺, and K⁺) with five-membered heteroaromatic rings [furan(C₄H₄O), thiophene(C₄H₄S), pyrrole(C₄H₅N)] were examined by high level ab initio calculations, to investigate the different roles of C₄H₄O, C₄H₄S, and C₄H₅N as the electron donor, the influential factors that affect these interactions, the nature of this kind of cation···π interaction, and to determine topological and energetical properties to characterize these interactions. The sulfur atom in C₄H₄S plays a certain role in the cation···π interactions except the C–C π bond, which is different from C₄H₄O and C₄H₅N. The size of cation and the character of heteroaromatic ring are two influential factors that affect the cation···π interactions. The studied cation···π interactions can be classified as “closed-shell” and noncovalent interactions. The electron density and its Laplacian at the bond critical points and ring critical points generated upon complexation are useful measurements for the strength of cation···π interactions.     

Studies on coordination chemistry of a nitrogen–sulfur donor ligand with lighter and heavier metal ions and biological activities of its complexes

Complexes of S-benzyldithiocarbazate (SBDTC) with lighter and heavier metals, viz., Cr^III, Fe^III, Sb^III, Zr^IV, Th^IV and U^VI have been prepared and characterized by elemental analyses, conductivity measurements, and spectral studies. The complexes: [Cr(SBDTCA)₃],^** [Fe(SBDTCA)₃], [Sb(SBDTCA)₃], [Sb(SBDTCA)₂Cl · H₂O], [Zr(O)(SBDTCA)₂ · H₂O], [Th(SBDTCA)(NO₃)₃ · H₂O)], and [U(O)₂(SBDTCA)₂] were all prepared in alkaline media. They were all hexa-coordinated with bidentate, uninegative chelation of the ligand. [Fe(SBDTCA)₃], [Sb(SBDTCA)₃] and [Sb(SBDTCA)₂Cl · H₂O] were strongly effective against bacteria giving clear inhibition zones with Pseudomonas aeruginosa and Bacillus cereus. The compounds showed poor antifungal activity. The antimony complexes were strongly cytotoxic against leukemic cells with CD₅₀ values of 3.2–6.7 g cm^–3 as compared to the CD₅₀ value of 14.5 g cm^–3 of the free SbCl₃ molecule.     

Host–guest interactions of a twisted cucurbit[15]uril with paraquat derivatives and bispyridinium salts

Host–guest complexations of a twisted cucurbit[15]uril with some paraquat derivatives and bispyridinium salts in aqueous solution are investigated by nuclear magnetic resonance, UV–vis spectrometry and isothermal titration calorimetry. These complexations are mainly enthalpy-driven.     

Study on the inclusion interaction of methylated-β-cyclodextrins with albendazole by spectrofluorimetry and its application

The inclusion interaction between three types of methylated-β-cyclodextrins （Me-β-CDs） and albendazole （ABZ） was studied by spectrofluorimetry. The result showed that Me-β-CDs reacted with ABZ to form an inclusion complex, 1： 1 stoichiometry for Me- β-CDs-ABZ complex was established and its association constant have been determined from fluorescence data by Benesi- Hildebrand＇s method （double reciprocal plots）. It was noted that 2,6-DM-β-CD exhibited stronger binding ability than other Me-β- CDs. Based on the significant enhancement of fluorescence intensity of inclusion complex, a simple and highly sensitive fluorimetric method is proposed for the determination of ABZ in the presence of 2,6-DM-β-CD. The proposed method was successfully applied to the determination of ABZ in tablets and human urine.     

Estimation of the normal boiling points of water and 1,2-dimethoxyethane through the viscosity–temperature dependence in the corresponding binary mixtures

Excess quantities calculated from literature values of experimental density and viscosity in 1,2-dimethoxyethane + water binary systems (from 303.15 to 323.15 K) can lead us to test different correlation equations as well as their corresponding derivative properties. Inspection of the Arrhenius activation energy (Ea) and the enthalpy of activation of viscous flow (ΔH*) shows very close values; here, we can define partial molar activation energies Ea₁ and Ea₂ for 1,2-dimethoxyethane and water, respectively, along with their individual contribution separately. Correlation between the two Arrhenius parameters of viscosity in all compositions shows existence of main distinct interaction behaviours delimited by particular mole fractions in 1,2-dimethoxyethane. Moreover, we add that correlation between Arrhenius parameters reveals interesting Arrhenius temperature which is closely related to the vapourisation temperature in the liquid vapour equilibrium, and the limiting corresponding partial molar properties can permit us to estimate the boiling points of the pure components.     

Transformations of cyclohexa-1,4-diene under the action of biphenyl—alkali metal systems in THF. Synergistic acceleration by mixtures of lithium and sodium

In the interaction of cyclohexa-1,4-diene (1,4-CHD) with a mixture of biphenyl and metallic lithium or sodium in THF at 20 °C, three processes occur, viz., disproportionation of 1,4-CHD to form benzene and cyclohexene, dehydrogenation of 1,4-CHD to form benzene and molecular hydrogen, and dehydrogenation of 1,4-CHD to form benzene and lithium or sodium hydride. In the case of lithium on the use of an equimolar amount of biphenyl, the isomerization of 1,4-CHD to cyclohexa-1,3-diene is also observed. When the molar ratio Li(Na): Ph₂ increases from 1 : 1 to 2 : 1, i.e., when the reaction is carried out in the presence of an alkali metal solid phase, the overall conversion of 1,4-CHD into benzene and cyclohexene increases. The use of mixtures of lithium and sodium leads to acceleration of the processes of the formation of benzene and cyclohexene. The possible mechanism of the synergistic effect found is discussed.     

Study on thermal decomposition of polymers by simultaneous measurement of TG–DTA and miniature ion trap mass spectrometry equipped with skimmer-type interface

Simultaneous thermogravimetry–differential thermal analysis and miniature ion trap mass spectrometry (TG–DTA–ITMS) instrument equipped with a skimmer-type interface has been successfully developed. The system allows precise real-time monitoring analysis of activated organic compounds such as pyrolysates because gaseous transformation of the evolved gases from the TG–DTA is suppressed by the skimmer-type interface. Also, excessive fragmentation during ionization of molecules can be avoided with the soft ionization method by photoionization. In addition, the miniaturized ITMS is equipped with unique tandem MS capability. These features permit a better understanding of the complicated thermal behavior and the precise pyrolysates of materials. The pyrolysis of various standard reagent polymers such as polymethyl methacrylate, polystyrene, and polyphenylene sulfide has been examined by the TG–DTA–ITMS in inert atmosphere. The synergy effect of the skimmer-type interface and the ITMS was evaluated comparatively with conventional quadrupole mass spectrometry results. It was confirmed that the real-time monitoring ITMS/MS worked satisfactorily. Here, we demonstrate a valuable application of the TG–DTA–ITMS in the detailed analysis of commercial polymers.     

Synergistic effects of alkali metals in the alkylation of naphthalene and toluene with ethene in the ArH–alkali metal systems in THF (ArH – naphthalene,phenanthrene)

The use of mixtures of metallic lithium and sodium in the naphthalene–alkali metal systems in THF leads to a synergistic acceleration of the naphthalene alkylation with ethene at room temperature and atmospheric pressure. The greatest synergistic effect is observed at a Li:Na molar ratio of 2:1. Under these conditions, the overall conversion of naphthalene into alkylation products (linear 1-alkylnaphthalenes and their dihydro derivatives) attains 88% after 24 h (a (Li + Na):C₁₀H₈ ratio is 2:1). The use of mixtures of metallic lithium and potassium in such systems results, however, in a synergistic retardation of the alkylation process. The strongest retarding effect is observed at a Li:K molar ratio of 1:1. The efficiency of the toluene alkylation with ethene in the naphthalene–alkali metal systems in THF is also increased on the replacement of lithium or sodium by their mixtures. The best results are obtained at a Li:Na molar ratio of 1:3. With this Li:Na ratio, toluene is almost quantitatively converted into linear and α-branched higher monoalkylbenzenes (24 h, (Li + Na):C₁₀H₈ = 2:1). The rate of the naphthalene alkylation with ethene in the presence of toluene is enhanced as well on an introduction of mixtures of lithium and sodium into the system. However the maximum of the activity is shifted here towards higher lithium content (Li:Na = 1:1). A similar synergistic effect of lithium and sodium was found on studying the toluene alkylation with ethene in the phenanthrene–Li–Na systems in THF (a (Li + Na):phenanthrene ratio is 3:1). An addition of potassium to sodium also considerably increases the efficiency of the toluene and naphthalene alkylation with ethene in the naphthalene-based systems. The possible mechanism of the alkali metal synergism in the above-mentioned alkylation reactions is discussed.