Structure of the tetramer of α-methylstyrene

The structure of the tetrameric dianion formed by α-methylstyrene in tetrahydrofuran by reaction with sodium has been examined. Mass spectral, NMR, infrared, and kinetic data all indicate that the structure is rather than the structure which had previously been assumed for this species.     

Durch Nachbargruppenbeteiligung induzierte (1,2)-Chlorwasserstoff-Eliminierung aus ionisiertem 2-(β-Chloräthyl)- benzoesäuremethylester

By using deuterium labelled compounds and collisional activation spectra the mechanism of the unusually intensive HCl elimination from 2-(β-chloroalkyl)benzoic acid methyl ester as well as the structure of the product ion have been elucidated. It can be shown that the structure of the stable ion (lifetime τ～10?5 s) is best represented by 2-vinyl benzoic acid methyl ester whereas the reactive ion (lifetime τ<10^?6 s) at least partially rearranges to a cyclic ion. The hydrogen chloride elimination from 2-(β-chloroalkyl)benzoic acid is apparently a simple 1,2 process. A closer examination reveals that the reaction represents a further example of an unusual neighbouring group participation of the ester function.     

New access to thiazolo[4,5‐d]pyrimidine derivativess

4‐Amino‐5‐bromo‐2‐substituted‐aminopyrimidines are readily obtained from the newly prepared 5‐bromo‐2,4‐dichloro‐6‐methylpyrimidine by sequential treatment with ethanolic ammonia and secondary amines. These compounds were successfully reacted with various isothiocyanates in the presence of sodamide in DMF to form the new thiazolo[4,5‐d] pyrimidine derivatives.     

Zur Darstellung von Cyclophosphaten,Cyclophosphatophosphonaten, Diphosphonaten und Diphosphiten in Harnstoffschmelzen

Preparation of Cyclophosphates, Cyclophosphatophosphonates, Diphosphonates, and Di-phosphites in Urea Melts Ammonium cyclotriphosphate (NH₄)P₃O₉, ammonium cyclotetraphosphate [P^IV? P^IV ? O? ]₂, ammonium cyclotriphosphatophosphonates Ammonium organyldiphosphonates And ammonium diphosphites are prepared in high yields on heating acidic phosphates, phosphonates, and phosphites in urea or urea/ammonium nitrate melts. The mechanism of the dehydration of phosphorus compounds containing POH groups in molten urea is discussed.     

Δ2‐Isoxazolines from β,γ‐unsaturated oximes

3,5‐Disubstituted Δ²‐isoxazolines can be prepared using the palladium‐mediated nucleometalation / methoxycarbonylation of β,γ‐unsaturated oximes. This novel route to this class of compounds is tolerant of a wide variety of functionality in the starting material, and provides a rapid route to highly functionalized isoxazolines.     

Anionic copolymerizations of acrylonitrile with β-propiolactone

Anionic copolymerizations of acrylonitrile (monomer 1) with β-propiolactone (monomer 2) and the structures of the resulting copolymers were studied. The copolymerization with sodium cyanide in N,N-dimethylformamide gave copolymers of the structure I containing acid anhydride linkage in the molecular chains, with the monomer reactivity ratios, r₁ = 1.20, r₂ = 0.00. The copolymerization with potassium hydroxide gave either copolymers of the structure II (r₁ = 0.00, r₂ = 3.64 at 30°C; r₁ = 0.00, r₂ = 5.00 at 40°C) in N,N-dimethylformamide or only β-propiolactone homopolymer in toluene.      

The loss of CH3⋅ from some unsaturated dithioesters

The mechanism for the loss of CH₃? (and C₂H₅?) from the molecular ions of some unsaturated dithioesters of the type with n=0, 1, 2, has been studied. Based on first field free region metastable ion characteristics it is proposed that 1,3-dithiolium type product ions are generated. Deuterium labelling experiments indicated that the molecular ions of the 2-alkenyl alkanedithioates undergo a rearrangement prior to fragmentation which resembles the [3,3]sigmatropic rearrangement in solution chemistry.     

γ-Radiation-produced supported metal complex catalysts. 3. Phosphinated polypropylene supports

p-Styryldiphenylphosphine was grafted onto polypropylene by γ-radiation. However, olefinic phosphines in general do not readily undergo such grafting. Among the many other olefinic phosphines examined only 1-(4-diphenylphosphinophenyl)-prop-1-ene and vinyldiphenylphosphine were grafted successfully and both had low grafting yields. The optimum conditions for grafting involve low dose rates and high total doses of γ-radiation in dimethylsulfoxide as solvent. This grafting is sensitive to impurities and inhomogeneity in the product readily results, especially at high grafting yields. Oxygen must be rigorously excluded if oxidation of grafted phosphorus(III) to phosphorus (V) is to be avoided. Phosphine oxides can be reduced to phosphines when grafted to the polymer with trichlorosilane. Mass spectrometry has shown that more than one olefinic phosphine binds to a single site in the polymer. Solid-state, high-resolution ³¹P-NMR is a valuable technique for characterizing the grafted polymer. The preparation and characterization of the following hitherto unreported phosphines is described: In addition, the precursor halides none of which has been reported, were prepared and characterized.     

Synthese „anorganischer”︁ Tintenfisch-Moleküle

Inorganic Pode-Type Molecules The reaction of monosubstituated polyethylenglykoles [m = 0—4, R = Cl, OCH₃, OAs(CH₃)₂, OSi(CH₃)₃] with amino compounds (CH₃)_xE[N(CH₃)₂]_y(E = Si, x = y = 2; E = Si, x = 1, y = 3; E = P, x = 0, y = 3; E = As, y = 0, y = 3) results in the formation of pode-type molecules of the formula . The synthesis and rearrangement of these compounds by heating is described.     

Darstellung und Eigenschaften von Ti-substituierten N-Heterocyclen

Preparation and Properties of Ti-substituted N-Heterocycles The compounds (x = 2 to 6) have been prepared by transamination of Ti(NMe₂)₄ with the heterocyclic amines and have been characterised by elemental analyses and ¹H NMR and IR spectroscopy. The dependence on both x and n of the thermal decomposition has been studied for the series and . The results can be interpreted in terms of the steric strain of the R₂N and substituents. Apart from the piperidido groups none of the ligands exhibit protective group properties comparable to the R₂N groups.     

Thermal decomposition of 3-chloro-3-trichloromethyldiazirine in solution

The thermal decomposition of 3-chloro-3-trichloromethyldizairine in carbon tetrachloride and iso-octane has been investigated over the temperature range 75–115°C. The products, tetrachloroethylene and nitrogen, are formed quantitatively by a first-order reaction which is probably unimolecular: The results yielded the following Arrhenius equations: .     

ESR evidence for main-chain scission produced by mechanical fracture of polymers at low temperature

ESR spectra have been observed from several polymers (polyethylene, polypropylene, polymethylmethacrylate, polytetrafluoroethylene, and polybutadiene) which were mechanically fractured in vacuum at 77°K. The spectra permit identification of the free radicals produced in chain scission. It has been demonstrated for the polymers of the type such as polypropylene and poly(methyl methacrylate), that the mechanical fracture produces two different scission radicals in pairs, namely, The results indicate convincingly that microscopic scission of polymer chains is caused by macroscopic destruction of polymeric material. The critical molecular size for mechanical rupture of polyethylene chains was experimentally determined to be a degree of polymerization between 70 and 100. This size agrees fairly well with the value predicted from a theoretical model.     

Addition‐Fragmentation Chain Transfer Involving Dimers of α‐Methylvinyl Monomers Studied by ESR Spectroscopy: Competition between Fragmentation and Bimolecular Termination

Detection of the adduct radical by ESR spectroscopy and after‐effect ESR measurements of the adduct radical concentrations in the photosensitized polymerization of styrene (St) in the presence of dimers of α‐methylstyrene (MSD) and methyl methacrylate have revealed that the dominant mechanism of adduct radical loss changes from bimolecular termination to fragmentation as the temperature is increased beyond 90 °C for St/MSD.

     

Electron impact studies. CVII—Negative ion mass spectra of the oxime group. Monoximes derived from α-dicarbonyl systems

Specific losses of water are observed from the molecular anions of monoximes of α-diketones. Labelling studies, kinetic energy release values and the +E spectra of ions have been used to aid in the elucidation of the fragmentation pathways. It is proposed that the majority of ions have α-keto nitrile structures.     

Convenient preparations of 2‐alkyl‐5‐oxopyrrolidine‐3‐carboxylic acids

Reduction of the Michael addition products of anions of nitro compounds to dimethyl maleate led to the spontaneous formation of the respective 2‐alkyl‐5‐oxopyrrolidine‐3‐carboxylic acid methyl esters. Conventional hydrolysis of the later gave the desired compounds.     

A novel one‐pot oxidative deformylation of N‐formyldihydroquinolines employing ferric chloride hexahydrate. Synthesis of 4‐chloro‐2‐phenylquinolines and 4‐chloro‐2‐(1,3‐diphenyl‐1H‐pyrazol‐4‐yl)quinolines

A novel versatile one‐pot oxidative deformylation approach has been developed to synthesize 4‐chloro‐2‐phenylquinolines and 4‐chloro‐2‐(1,3‐diphenyl‐1H‐pyrazol‐4‐yl)quinolines from the corresponding N‐formyldihydroquinolines.     

Kinetics of the First Order Autocatalytic Decomposition Reaction of Nitrocellulose （13.86% N）

The kinetics of the first order autocatalytic decomposition reaction of nitrocellulose (NC, 13.86% N) was studied by using DSC. The results show that the DSC curve for the initial 50% of conversion degree of NC can be de scribed by the first order autocatalytic equation dy/dt =-10^16.3 exp (-181860/RT)y-10^16.7ex(-173050/RT)y(1-y) and that for the latter 50% conversion degree of NC described by the reaction equations dy/dt=-10^16.4exp(-154820/RT)y (n=1) and dy/dt=-10^16.9 exp(-155270/RT) y^2.80(n≠1).     

Effect of gegen ion in cationic polymerization and copolymerization of trioxane

p-Chlorophenyldiazonium hexafluorophosphate has been reported to be a superior catalyst for cationic polymerization and copolymerization of trioxane as compared to boron trifluoride dibutyl etherate (BF₃·Bu₂O)¹. In the present investigation the effect of anions derived from elements in Group VA, AsF and SbF, has been ascertained. It has been concluded that p-chlorophenyldiazonium hexafluoroarsenate is also a superior catalyst to boron trifluoride dibutyletherate (BF₃·Bu₂O), while p-chlorophenyl-diazonium hexafluoroantimonate is inferior. Copolymers with the highest polymer yield (>95%) and molecular weight (intrinsic viscosity = 4 to 5) were obtained with Simple dependences on catalyst concentration have been observed to hold for a wide catalyst concentration range ([M]/[C]) = (1 to 20) × 10⁵: For the same relationships hold. However, the polymer yield (75%) and molecular weights (intrinsic viscosity ?1) are considerably lower while the extent of chain transfer is higher. Furthermore, the polymerization proceeds with explosive violence. The quantitative aspects resulting from polymerization, for the most part, can be interpreted in terms of the extent of dissociation of the propagating ions.     

1,8‐Diazafloren‐9‐one with alkyl and aryl isocyanides in the presence of acetylenic esters: A facile synthesis of γ‐spiroiminolactones

The 1:1 intermediate generated by the addition of alkyl and aryl isocyanides to dialkyl acetylenedicarboxylate is trapped by 1,8‐diazafloren‐9‐one to yield iminolactones in good yields.     

Exfoliation of Crystalline 2D Carbon Nitride: Thin Sheets,Scrolls and Bundles via Mechanical and Chemical Routes

The carbon nitride poly(triazine imide) with intercalated bromide ions is a layered, graphitic material of 2D covalently bonded molecular sheets with an exceptionally large gallery height of 3.52 Å due to the intercalated bromide anions. The material can be cleaved both mechanically and chemically into thin sheets and scrolls analogous to the carbon‐only systems graphite and graphene.