Raman study on pentacene:C60 bulk heterojunction films

We measured 785 nm excited Raman and infrared spectra of pentacene-d₁₄. The observed spectra were assigned on the basis of the Raman and infrared spectra calculated by the density functional theory (DFT) method at the B3LYP/6⬜311 + G** level. We measured 785 nm excited Raman spectrum of a pentacne-d₁₄:C₆₀ bulk heterojunction film. The spectrum was assigned on the basis of the wavenumber shifts upon deuteration of pentacene. The assignments of the 1462 and 493 cm^↙1 A_g bands of C₆₀ were confirmed. The 511, 453, and 256 cm^↙1 bands, which were observed only in pentacene:C₆₀ bulk heterojunction films, did not show large deuteration shifts. This result indicates that the 511, 453, and 256 cm^↙1 bands are attributed to activation of the silent modes of C₆₀ due to symmetry lowering_.     

Infrared and Raman Spectroscopy of Methylcyanodiacetylene (CH3C5N)

A spectroscopic study combining IR absorption and Raman scattering is presented for methylcyanodiacetylene (CH₃C₅N). Gas‐phase, cryogenic matrix‐isolated, and pure solid‐phase substance was analyzed. Out of 16 normal vibrational modes, 14 were directly observed. The analysis of the spectra was assisted by quantum chemical calculations of vibrational frequencies, IR absorption intensities, and Raman scattering activities at density functional theory and ab initio levels. Previous assignments of gas‐phase IR absorption bands were revisited and extended.     

Preparation and study of hydrides of fullerenes C60 and C70

Fullerene hydrides were prepared by hydrogenation of fullerences C₆₀ and C₇₀ using proton transfer from 9,10-dihydroanthracene to fullerene and were studied by mass spectrometry (electron impact, field desorption), IR, UV, and¹H and¹³C NMR spectroscopy. The main product of the hydrogenation of C₆₀ is C₆₀H₃₆, which is sufficiently stable. Hydrogenation of fullerene C₇₀ gives a series of polyhydrides C₇₀H _n (n=36–46), and the main product is C₇₀H₃₆. The dehydrogenation of C₆₀H₃₆ by 2,3-dichloro-5,6-dicyano-1,4-benzoquinone is not quantitative and results in the formation of fullerene derivatives along with C₆₀. The comparison of the IR and¹H and¹³C NMR spectral data for solid C₆₀H₃₆ with the theoretical calculations suggests that the fullerene hydride has aT-symmetric structure and contains four isolated benzenoid rings located at tetrahedral positions on the surface of the closed skeleton of the molecule. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya. No. 4, pp. 671–678, April, 1997.     

Tetrahydroboratobis(triphenylphosphine)copper(I): a vibrational spectroscopic study

Application of infrared and Raman spectroscopy together with hydrogen—deuterium substitution has allowed identification of at least seven of the twelve fundamental vibrational frequencies expected for the double bridge CuBH₄ unit in tetrahydroboratobis(triphenylphosphine)copper(I). Limited assignments for the AgBH₄ unit in the analogous silver compound, based on infrared data for the hydride deuteride, are also presented.     

Vibrational spectroscopic study of the antimonate mineral bindheimite Pb2Sb2O6(O,OH)

Raman spectroscopy complimented with infrared spectroscopy has been used to characterise the antimonate mineral bindheimite Pb₂Sb₂O₆(O,OH). The mineral is characterised by an intense Raman band at 656 cm⁻¹ assigned to SbO stretching vibrations. Other lower intensity bands at 664, 749 and 814 cm⁻¹ are also assigned to stretching vibrations. This observation suggests the non-equivalence of SbO units in the structure. Low intensity Raman bands at 293, 312 and 328 cm⁻¹ are assigned to the OSbO bending vibrations. Infrared bands at 979, 1008, 1037 and 1058 cm⁻¹ may be assigned to δOH deformation modes of SbOH units. Infrared bands at 1603 and 1640 cm⁻¹ are assigned to water bending vibrations, suggesting that water is involved in the bindheimite structure. Broad infrared bands centred upon 3250 cm⁻¹ supports this concept. Thus the true formula of bindheimite is questioned and probably should be written as Pb₂Sb₂O₆(O,OH,H₂O).     

Observation of sub-surface phenyl rings in polystyrene with vibrationally resonant sum-frequency generation

The use of vibrationally resonant sum-frequency generation (VR-SFG) spectroscopy to investigate the structure of surfaces and interfaces generally relies on the assumption that only the surface/interface is probed and that the vibrational mode assignments are known and correct. To make vibrational mode assignments, two fundamental aspects of the technique must be dealt with. First, not all vibrational modes observed in linear spectroscopic techniques, such as IR and Raman, are necessarily present in the VR-SFG spectrum. Second, while it is generally assumed that VR-SFG only probes the surface, this technique in actuality is sensitive to molecules in any environment with broken symmetry. Previously published assignments for the aromatic CH stretching modes of polystyrene surfaces are contradictory, and one purpose of this work is to revisit those assignments. In addition to thin films of polystyrene, we have collected VR-SFG spectra of dimethylphenyl silane, polystyrene covered with a layer of poly(methyl methacrylate) (PMMA), and plasma-treated polystyrene to aid our mode assignments. Density functional theory calculations were also performed on styrene oligomers. Based on these experimental and theoretical results, we have determined that not all the expected vibrational modes are observed in the VR-SFG spectrum of polystyrene. We have also found that one particular mode, the ν₂ symmetric stretch, accounts for two of the observed peaks, one from the exposed surface and a second feature from a subsurface layer within the polymer thin film. These two features appear at separate frequencies (11 cm⁻¹ separation) because this mode is very sensitive to the local density, which is higher in the bulk than at the surface. With these experimentally validated mode assignments, VR-SFG spectra in the aromatic CH stretching region can be interpreted more reliably. More importantly, these results demonstrate that great care must be taken in assigning VR-SFG spectra. These results also show that VR-SFG can be used to interrogate more than just free surfaces and buried interfaces; any area of broken symmetry is probed with this technique.     

Spectroscopic analysis and in situ monitoring of impregnation and extraction of polymer films and powders using supercritical fluids

A range of vibrational spectroscopic techniques are used to monitor supercritical fluid extraction and impregnation of polymers. Impregnation processes of this type show potential as alternative apporaches to the synthesis of polymer based catalysts and new materials. Methods have been devised using conventional Fourier transform infrared spectroscopy for real time monitoring of the extraction and impregnation of polyethylene films using an organometallic complex, CpMn(CO)₃ (Cp = η⁵ ? C₅ H₅) as a spectroscopic probe. Both low and high density powdered polyethylene may be impregnated using supercritical carbon dioxide. The resulting materials are analysed using FTIR photoacoustic spectroscopy, diffuse reflectance infrared spectroscopy and FT Raman spectroscopy to probe both the impregnated bulk of the polymer and surface-coated material. © 1994 John Wiley & Sons, Inc.     

An analysis of the vibrational frequencies and amplitudes of the H5O+2 ion in H4SiW12O40·6H2O (TSA·6H2O) and H3PW12O40·6H2O (TPA·6H2O)

The infrared, Raman and inelastic neutron scattering (INS) spectra of TSA·6H₂O and TPA·6H₂O are in agreement with those expected for the presence of H₅O⁺₂ ions. Force fields for different assignment schemes are compared with the observed vibrational frequencies and the INS spectral profile. All but two schemes are eliminated. Whilst low-resolution INS spectroscopy cannot distinguish between these two schemes, the orientations of the vibrational ellipsoids for one scheme are in better agreement with those reported from low-temperature crystallographic studies of the H₅O⁺₂ ion.     

Phonon spectra and phonon-dependent properties of AgSO4, an unusual sulfate of divalent silver

Phonon spectra of recently synthesized Ag(II)SO₄ have been measured using infrared absorption and Raman scattering spectroscopy, and theoretically predicted using density functional theory calculations. Excellent agreement between experimental and theoretical results with correlation coefficient of 1.05 allowed for full assignment of the experimentally observed vibrational bands, as well as calculation of standard vibrational entropy of AgSO₄ (118.2 J mol⁻¹ K⁻¹), vibrational heat capacity at constant volume (99.1 J mol⁻¹ K⁻¹), zero-point energy (48.3 kJ mol⁻¹). The experimental cut-off frequency of the phonon spectrum equals 1116 cm⁻¹ which translates to the Debye temperature of 1606 K. High frequencies of S–O stretching modes render sulfate connections of Ag(II) attractive precursors of high-T_C superconductors.     

Vibrational spectra of cyclopentadienyl chlorides of titanium,zirconium and hafnium. internal rotation and thermodynamic functions

The infrared and Raman spectra of some cyclopentadienyl compounds of the transition metals, namely Ti(C₅H₅)Cl₃ and M(C₅H₅)₂Cl₂ (M = Ti, Zr and Hf), are reported and discussed. The infrared spectra of the gaseous species isolated in argon matrices at 10 K provide structural information about the single molecules. Particular attention has been paid to the low-frequency region in order to achieve more reliable assignments for the internal-rotation modes. The structural data and the fundamental frequencies derived from the spectra are employed in a calculation of the thermodynamic functions for these compounds in the ideal gas state.     

The spectroscopic characterization of the sulphate mineral ettringite from Kuruman manganese deposits,South Africa

The mineral ettringite has been studied using a number of techniques, including XRD, SEM with EDX, thermogravimetry and vibrational spectroscopy. The mineral proved to be composed of 53% of ettringite and 47% of thaumasite in a solid solution. Thermogravimetry shows a mass loss of 46.2% up to 1000 °C. Raman spectroscopy identifies multiple sulphate symmetric stretching modes in line with the three sulphate crystallographically different sites. Raman spectroscopy also identifies a band at 1072 cm⁻¹ attributed to a carbonate symmetric stretching mode, confirming the presence of thaumasite. The observation of multiple bands in the ν₄ spectral region between 700 and 550 cm⁻¹ offers evidence for the reduction in symmetry of the sulphate anion from T_d to C_2v or even lower symmetry. The Raman band at 3629 cm⁻¹ is assigned to the OH unit stretching vibration and the broad feature at around 3487 cm⁻¹ to water stretching bands. Vibrational spectroscopy enables an assessment of the molecular structure of natural ettringite to be made.     

Infrared and Raman spectra of 2,4-dimethylaniline

The infrared spectra of 2,4 dimethylaniline have been recorded in the region 3600-100 cm⁻¹. The Raman spectra with polarization measurements have been recorded and investigated for the first time in the region 3500-100 cm⁻¹. New frequency assignments have been proposed assuming the molecule to possess an approximateC ₂ symmetry. Fifty normal modes of the molecule, out of a possible fifty four modes, have actually been observed and assigned including twenty seven hitherto unreported frequencies. The observed spectral changes give evidence of the presence of an intermolecular hydrogen bonding of an N−H...N type, and suggest a solid-solid phase transition between 223 and 123 K in the molecule.     

Novel platinum‐based anticancer drug: a complete vibrational study

The introduction of cisplatin to oncology, in the 1970s, marked the onset of the search for novel and improved metal‐based anticancer drugs. Polynuclear Pt^II and Pd^II complexes with linear alkylamines as bridging ligands are a class of potential antineoplastic agents that have shown promising cytotoxicity against low‐prognosis human cancers, such as metastatic breast adenocarcinoma and osteosarcoma. The present study reports an analysis of [μ‐N,N′‐bis(3‐aminopropyl)butane‐1,4‐diamine‐κ⁴N,N′:N′′,N′′′]bis[dichloridoplatinum(II)], [Pt₂Cl₄(C₁₀H₂₆N₄)], denoted Pt₂Spm (Spm is spermine), by vibrational spectroscopy coupled to theoretical calculations. Within the latter, the Density Functional Theory (DFT – mPW1PW/6‐31G*) and Effective Core Potential (ECP – LANL2DZ) approaches were used, in order to ensure the most accurate representation of the molecule and achieve a maximum agreement with the experimental data. The solid‐state geometry of Pt₂Spm corresponds to C_i symmetry, displaying 132 vibrational modes. A complete assignment of the experimental vibrational profile of the system was attained through the combined application of complementary Raman, FT–IR and Inelastic Neutron Scattering (INS) techniques. INS allowed an unequivocal identification of the CH₂ and NH₂ rocking modes, not clearly detected by the optical techniques, while Raman measurements led to a clear discrimination of the Pt—N stretching frequencies from the two distinct Pt—N moieties within the chelate. The metal‐to‐metal distances calculated for the molecule under study were found to allow the establishment of effective inter‐ and intrastrand crosslinks with DNA. These results will hopefully help to clarify the mode of action of the compound, at the molecular level, contributing to the development of improved cisplatin‐like chemotherapeutic drugs having a higher efficacy and specificity coupled to lower acquired resistance and deleterious side effects.     

Ionic Liquid for in situ Vis/NIR and Raman Spectroelectrochemistry: Doping of Carbon Nanostructures

1-butyl-3-methylimidazolium tetrafluoroborate (an ionic liquid) is an advantageous electrolyte for the study of charge-transfer reactions at single-walled carbon nanotubes (SWCNTs) and fullerene peapods (C₆₀@SWCNT). Compared to traditional electrolyte solutions, this medium offers a broader window of electrochemical potentials to be applied, and favorable optical properties for in situ Vis/NIR and Raman spectroelectrochemistry of nano-carbon species. The electrochemistry of both nanotubes and peapods is dominated by their capacitive double-layer charging. Vis/NIR spectroelectrochemistry confirms the charging-induced bleaching of transitions between Van Hove singularities. At high positive potentials, new optical transitions were activated in partly filled valence band. The bleaching of optical transitions is mirrored by the quenching of resonance Raman scattering in the region of tube-related modes. The Raman frequency of the tangential displacement mode of SWCNT shifts to blue upon both anodic and cathodic charging in the ionic liquid. The Raman modes of intratubular C₆₀ exhibit a considerable intensity increase upon anodic doping of peapods.     

High pressure behavior of α-NaVO3: A Raman scattering study

The reported pressure-induced amorphization in α-NaVO₃ has been re-investigated using Raman spectroscopy. Discontinuous changes are noted in the Raman spectrum above 5.6 GPa implying large structural changes across the transition. The decrease in frequency of the V-O stretching mode across the transition suggests that the vanadium atom may be in octahedral coordination in the high pressure phase. Excessive broadening of the internal modes is observed above 6 GPa. New peaks characteristic of a crystalline phase gain in intensity at higher pressures in the bending modes region; however, the transformation is not complete even at 13 GPa. Co-existence of phases is noted over a significant pressure range above the onset of transition. Pressure released spectrum is found to be a mixture of crystalline α-phase, traces of crystalline β-phase and highly disordered phase consisting of V-O units in five- and six-fold coordination.     

Structure and optical properties of CVD molybdenum oxide films for electrochromic application

Vibrational and optical properties of MoO₃ thin films have been studied by Raman and infrared spectroscopy. The films were deposited onto Si substrates at a temperature of 150 °C by chemical vapor deposition of Mo(CO)₆ at atmospheric pressure and different amounts of oxygen in the reactor. The Raman and IR spectral analyses show that the as-deposited films are in general amorphous. Post-deposition annealing at 300 and 400 °C leads to crystallization and the MoO₃ film structure is a mixture of orthorhombic and monoclinic MoO₃ modifications. Transformation of the monoclinic crystallographic modification to a thoroughly orthorhombic layered structure is observed for films heated at temperatures above 400 °C. Electronic Publication     

Studies on novel cyclodextrans: Inclusion of C60 and C70

Cycloisomalto-heptaose (CI-7) and cycloisomalto-octaose (CI-8) are two novel cyclodextrans. Treatment with C₆₀ or C₇₀ by kneading leads to the formation of four distinct water-soluble inclusion complexes: CI-7/C₆₀ (2: 1), CI-8/C₆₀ (2: 1), CI-7/C₇₀ (2: 1) and CI-8/C₇₀ (2: 1). Their formation and structures have been examined by UV vis spectroscopy, X-ray powder diffraction and fluorescence spectral studies. The reaction is a reversible process.     

An infrared and inelastic neutron scattering spectroscopic investigation on the interaction of eta-alumina and methanol

The industrially important interaction of methanol with an eta-alumina catalyst has been investigated by a combination of infrared spectroscopy (diffuse reflectance and transmission) and inelastic neutron scattering (INS) spectroscopy. The infrared and INS spectra together show that chemisorbed methoxy is the only surface species present. Confirmation of the assignments was provided by a periodic DFT calculation of methoxy on eta-alumina (110). The thermal conversion of adsorbed methoxy groups to form dimethylether was also followed by INS, with DFT calculations assisting assignments. An intense feature about 2600 cm(-1) was observed in the diffuse reflectance spectrum. This band is poorly described in the extensive literature on the alumina/methanol adsorption system and its observation raised the possibility of a new surface species existing on this particular catalyst surface. INS measurements established that the 2600 cm(-1) feature could be assigned to a combination band of the methyl rock with the methyl deformation modes. This assignment was reinforced by an analysis of the neutron scattering intensity at a particular energy as a function of momentum transfer, which confirmed this particular adsorbed methoxy feature to arise from a second order transition. Similar behaviour was observed in the model compound Al(OCH3)3. The anomalous infrared intensity of the 2600 cm(-1) peak in the diffuse reflectance spectrum is a consequence of the different absorption coefficients of the C-H stretch and the combination mode. The implications for catalyst studies are discussed.     

The structure of mimetite,arsenian pyromorphite and hedyphane – A Raman spectroscopic study

The minerals mimetite Pb₅(AsO₄)₃Cl, arsenian pyromorphite Pb₅(PO₄,AsO₄)₃Cl and hedyphane Pb₃Ca₂(AsO₄)₃Cl have been studied by Raman spectroscopy complimented with infrared spectroscopy. Mimetite is characterised by a band at 812–3 cm⁻¹ attributed to the A_g mode. For the arsenian pyromorphite this band is observed at 818 cm⁻¹ and for hedyphane at 819 cm⁻¹. For mimetite and hedyphane bands at 788 and 765 cm⁻¹ are attributed to A_u and E_1u vibrational modes and are both Raman and infrared active. For the arsenian pyromorphite, Raman bands at 917–1014 cm⁻¹ are attributed to phosphate stretching vibrations. Raman spectroscopy clearly identifies bands attributable to isomorphous substitution of arsenate by phosphate. The observation of low intensity bands in the 3200–3550 cm⁻¹ region are assigned to adsorbed water and OH units, thus indicating some replacement of chloride ions with hydroxyl ions.