Water-soluble complexes MX2L2 (M = Pd,Pt; L = PPh2(C6H4-p-SO3K)): Synthesis,stereoisomerism, and catalytic activities for aromatic cyanation in n-heptane/water biphasic solution

Reaction of (COD)MX₂ (M = Pd, Pt; X = Cl, I; COD = 1,5-cyclooctadiene) and P(C₆H₅)₂(C₆H₄-p-SO₃K) afforded water-soluble complexes MX₂{P(C₆H₅)₂(C₆H₄-p-SO₃K)}₂ (M = Pd; X = Cl (1), M = Pt; X = Cl (2), I (3)) in high yields. Complexes 1–3 were fully characterized by various spectroscopic methods (IR, ¹H-, ¹³C{¹H}- and ³¹P{¹H}-NMR spectroscopy) and elemental analyses. For 1 and 3, a mixture of the cis- and trans-isomer was produced from the reaction. For 2, however, only the cis-isomer was obtained. The stereochemistry of 1–3 can be assigned by the chemical shifts and the ¹J(Pt–P) values in ³¹P{¹H}-NMR spectral data. The ratios of the cis/trans isomers of 1 and 3 obtained from reactions in a range of solvents with various dielectric constants resulted in a little variation. However, addition of aqueous potassium halide solution to a DMSO-d₆ solution of 1 and 3 considerably increased the ratio of the cis/trans, respectively, indicating a strong intramolecular interligand Coulombic repulsion between the ionic phosphine ligands is present. Catalytic cyanation of aromatic iodide with KCN/ZnCl₂ in n-heptane/water biphasic system has been tested in the presence of 1–3 with base.     

An experimental and theoretical investigation on hypervalent organoselenium(II) halides: Case study of [2-(Et2NCH2)C6H4]SeX (X = Cl,Br, I)

Cleavage of the Se–Se bond in [2-(Et₂NCH₂)C₆H₄]₂Se₂ (1) with SO₂Cl₂ (1:1 molar ratio) yielded the organoselenium(II) chloride [2-(Et₂NCH₂)C₆H₄]SeCl (2). Treatment of 2 with excess of KX yielded the organoselenium(II) halides [2-(Et₂NCH₂)C₆H₄]SeX [X = Br (3), I (4)]. The new compounds 2–4 were characterized by solution NMR spectroscopy (¹H, ¹³C, ⁷⁷Se, 2D experiments). The solid-state molecular structures of 2, 2·HCl and 3 were established by single crystal X-ray diffraction. Distorted T-shaped coordination geometries of type (C,N)SeX (X = Cl, Br) and CSeCl₂ were found for the neutral halides 2 and 3, and the zwitterionic species [2-{Et₂N⁺(H)CH₂}C₆H₄]SeCl₂￣ (2·HCl), respectively. DFT calculations were performed on 2–4 and the related tellurium compounds [2-(Et₂NCH₂)C₆H₄]TeX [X = Cl (5), Br (6) and I (7)] in order to elucidate the bond nature and FT-Raman features of this class of organochalcogen(II) derivatives.     

Olefin epoxidation catalyzed by [Ru(TDL)(tmeda)H2O] complexes (TDL = tridentate Schiff-base ligand; tmeda = tetramethylethylenediamine)

Mixed-chelate complexes of ruthenium have been synthesized using tridentate Schiff-base ligands (TDLs) derived from condensation of 2-aminophenol or 2-aminobenzoic acid with aldehydes (salicyldehyde, 2-pyridinecarboxaldehyde), and tmeda (tetramethylethylenediamine). [Ru^III(hpsd)(tmeda)(H₂O)]⁺ (1), [Ru^III(hppc)(tmeda)(H₂O)]²⁺ (2), [Ru^III(cpsd)(tmeda)(H₂O)]⁺ (3) and [Ru^III(cppc)(tmeda)(H₂O)]²⁺ (4) complexes (where hpsd²⁻ = N-(hydroxyphenyl)salicylaldiminato); hppc⁻ = N-(2-hydroxyphenylpyridine-2-carboxaldiminato); cpsd²⁻ = (N-(2-carboxyphenyl)salicylaldiminato); cppc⁻ = N-2-carboxyphenylpyridine-2-carboxaldiminato) were characterized by microanalysis, spectral (IR and UV–vis), conductance, magnetic moment and electrochemical studies. Complexes 1–4 catalyzed the epoxidation of cyclohexene, styrene, 4-chlorostyrene, 4-methylstyrene, 4-methoxystyrene, 4-nitrostyrene, cis- and trans-stilbenes effectively at ambient temperature using tert-butylhydroperoxide (t-BuOOH) as terminal oxidant. On the basis of Hammett correlation (log k_rel vs. σ⁺) and product analysis, a mechanism involving intermediacy of a [Ru–O–OBu^t] radicaloid species is proposed for the catalytic epoxidation process.     

Isomerism in tetrahedral rhenium cluster complexes [Re4Q4(PMe2Ph)4X8]·nCH2Cl2 (Q = Se, X = Br; Q = Te, X = Cl, Br)

Three new tetrahedral rhenium cluster compounds [Re₄Se₄(PMe₂Ph)₄Br₈]·1.5CH₂Cl₂ (1), [Re₄Te₄(PMe₂Ph)₄Br₈]·CH₂Cl₂ (2), and [Re₄Te₄(PMe₂Ph)₄Cl₈]·CH₂Cl₂ (3) have been synthesized by the reaction of the corresponding precursor chalcohalide complexes [Re₄Q₄(TeX₂)₄X₈] (X = Br, Q = Se (for 1), Te (for 2); X = Cl, Q = Te (for 3)) with dimethylphenylphosphine in CH₂Cl₂. All compounds have been characterized by X-ray single-crystal diffraction and elemental analyses, IR and ³¹P NMR spectroscopy. ³¹P NMR spectroscopy indicates the formation of isomers in solution, confirmed by single-crystal X-ray analysis.     

Alkynyl Ti-M complexes based on M(CO)4 and MO2 building blocks (M = Mo, W)

The synthesis and properties of heterobimetallic Ti-M complexes of type {[[Ti](μ-η¹:η²-CCSiMe₃)][M(μ-η¹:η²-CCSiMe₃)(CO)₄]} (M = Mo: 5, [Ti] = (η⁵-C₅H₅)₂Ti; 6, [Ti] = (η⁵-C₅H₄SiMe₃)₂Ti; M = W: 7, [Ti] = (η⁵-C₅H₅)₂Ti; 8, [Ti] = (η⁵-C₅H₄SiMe₃)₂Ti) and {[Ti](μ-η¹:η²-CCSiMe₃)₂}MO₂ (M = Mo: 13, [Ti] = (η⁵-C₅H₅)₂Ti; 14, [Ti] = (η⁵-C₅H₄SiMe₃)₂Ti). M = W: 15, [Ti] = (η⁵-C₅H₅)₂Ti; 16, [Ti] = (η⁵-C₅H₄SiMe₃)₂Ti) are reported. Compounds 5-8 were accessible by treatment of [Ti](CCSiMe₃)₂ (1, [Ti] = (η⁵-C₅H₅)₂Ti; 2, [Ti] = (η⁵-C₅H₄SiMe₃)₂Ti) with [M(CO)₅(thf)] (3, M = Mo; 4, M = W) or [M(CO)₄(nbd)] (9, M = Mo; 10, M = W; nbd = bicyclo[2.2.1]hepta-2,5-diene), while 13-16 could be obtained either by the subsequent reaction of 1 and 2 with [M(CO)₃(MeCN)₃] (11, M = Mo; 12, M = W) and oxygen, or directly by oxidation of 5-8 with air. A mechanism for the formation of 5-8 is postulated based on the in-situ generation of [Ti](CCSiMe₃)((η²-CCSiMe₃)M(CO)₅), {[Ti](μ-η¹:η²-CCSiMe₃)₂}-M(CO)₄, and [Ti](μ-η¹:η²-CCSiMe₃)((μ-CCSiMe₃)M(CO)₄) as a result of the chelating effect exerted by the bis(alkynyl) titanocene fragment and the steric constraints imposed by the M(CO)₄ entity.The molecular structure of 5 in the solid state were determined by single crystal X-ray diffraction analysis. In doubly alkynyl-bridged 5 the alkynides are bridging the metals Ti and Mo as a σ-donor to one metal and as a π-donor to the other with the [Ti](CCSiMe₃)₂Mo core being planar.     

Rhodium(I) carbonyl complexes of chalcogen functionalized tripodal phosphines, [CH3C(CH2P(X)Ph2)3] {X = O, S, Se} and their reactivity

The reaction of dimeric rhodium precursor [Rh(CO)₂Cl]₂ with two molar equivalent of 1,1,1-tris(diphenylphosphinomethyl)ethane trichalcogenide ligands, [CH₃C(CH₂P(X)Ph₂)₃](L), where X = O(a), S(b) and Se(c) affords the complexes of the type [Rh(CO)₂Cl(L)] (1a–1c). The complexes 1a–1c have been characterized by elemental analyses, mass spectrometry, IR and NMR (¹H, ³¹P and ¹³C) spectroscopy and the ligands a–c are structurally determined by single crystal X-ray diffraction. 1a–1c undergo oxidative addition (OA) reactions with different electrophiles such as CH₃I, C₂H₅I and C₆H₅CH₂Cl to give Rh(III) complexes of the types [Rh(CO)(COR)ClXL] {R = –CH₃ (2a–2c), –C₂H₅ (3a–3c); X = I and R = –CH₂C₆H₅ (4a–4c); X = Cl}. Kinetic data for the reaction of a–c with CH₃I indicate a first-order reaction. The catalytic activity of 1a–1c for the carbonylation of methanol to acetic acid and its ester is evaluated and a higher turn over number (TON = 1564–1723) is obtained compared to that of the well-known commercial species [Rh(CO)₂I₂]⁻ (TON = 1000) under the reaction conditions: temperature 130 ± 2 °C, pressure 30 ± 2 bar and time 1 h.     

Synthèse et étude par spectroscopies infrarouge,Raman et Mössbauer de complexes de SnCln (n = 4, 5) avec Ph3PO,Ph3AsO et R4ZX (R = Me,Et ; Z = N,P et X = Cl,Br, SCN). Structure moléculaire de [C6H5COCH2NH3]2[SnCl6]

Synthesis, infrared, Raman and Mössbauer spectroscopic studies of SnCl_n (n = 4, 5) with Ph₃PO, Ph₃AsO and R₄ZX (R = Me, Et ; Z = N, P and X = Cl, Br, SCN). Molecular structure of [C₆H₅COCH₂NH₃]₂[SnCl₆]. SnCl₄-, SnCl₅⁻- and SnCl₆²⁻-containing compounds have been synthesized, and their Mössbauer and infrared spectroscopic studies undertaken. The environment around the tin centre is octahedral in all compounds. Infrared and Mössbauer spectroscopies show that the thiocyanate anion acts as a N-donor ligand. The X-ray structure determination of [C₆H₅COCH₂NH₃]₂[SnCl₆] has also been reported; this structure consists of octahedral SnCl₆²⁻ anions connected together into layers via hydrogen bonds between the chlorine and the hydrogen atoms of the NH₃⁺ groups of the C₆H₅COCH₂NH₃⁺ cations.     

Synthesis,crystal structure and thermal behaviour of [La(hfa)3(Phen)2] (hfa = hexafluoroacetylacetonate,Phen = o-phenanthroline)

The mixed ligand complex [La(hfa)₃(Phen)₂] (I) was obtained by the interaction of La(hfa)₃ and Phen; its composition does not depend on the stoichiometry of the reagents. According to the X-ray single crystal analysis data, complex I crystallizes in the monoclinic space group P2₁/n, with a = 13.583(3) Å, b = 16.959(3) Å, c = 18.860(4) Å, β = 94.71(3)° and Z = 4. The structure of I consists of isolated mononuclear molecules, the coordination number of La being 10. Thermal behaviour and composition of the vapor phase have been studied for I by thermal analysis and mass-spectrometry using a Knudsen cell. The mixed ligand complex I was found to sublime congruently in the temperature range 370–460 K: [La(hfa)₃(Phen)₂]_(s) = [La(hfa)₃(Phen)]_(g) + Phen_(g), Δ_rH⁰(T) = 316.2 ± 1.8 kJ/mol.     

Synthesis of heteronuclear (MoRu2) clusters from 16-electron half-sandwich complexes (p-Cymene)Ru[E2C2(B10H10)] (E = S,Se)

The heterometallic cluster complexes {(p-Cymene)Ru[S₂C₂(B₁₀H₁₀)]}Mo(CO)₂{(CO)₃Ru[S₂C₂(B₁₀H₁₀)]} (2) and {(p-Cymene)Ru[Se₂C₂(B₁₀H₁₀)]}₂Mo(CO)₂ (3) (p-Cymene = η⁶-4-isopropyl-toluene) have been synthesized from the reactions of 16-electron half-sandwich ruthenium 1,2-dichalcogenolate carborane complexes (p-Cymene)Ru[E₂C₂(B₁₀H₁₀)] (E = S(1a), Se(1b)) with Mo(CO)₃(Py)₃ in the presence of BF₃ · Et₂O. The complexes of 2 and 3 were characterized by elemental analysis and IR, NMR spectra. The molecular structure of 2 has been characterized by single-crystal X-ray diffraction analysis. Complex 2 is unsymmetrical and the two Ru–Mo single bonds (2.7893(14), 2.8189(13) Å) are each supported by a symmetrically bridging o-carborane-1,2-dithiolato ligand.     

Alkynyl Ti-M complexes with M = Cd and Hg: Synthesis, characterization, and reaction chemistry

The synthesis and properties of heterobimetallic Ti-Cd complexes of type {[Ti](μ-η¹:η²-CCR)₂}CdX₂ ([Ti] = Ti(η⁵-C₅H₄SiMe₃)₂; R = SiMe₃: 3a, X = Cl; 3b, X = Br; 3c, X = I; R = Fc: 3d, X = Br; Fc = Fe(η⁵-C₅H₄)(η⁵-C₅H₅) is reported. These compounds were accessible by treatment of [Ti](CCR)₂ (1a, R = SiMe₃; 1b, R = Fc) with the cadmium salts CdX₂ (2a, X = Cl; 2b, X = Br; 2c, X = I) in a 1:1 M ratio in diethyl ether. Dissolving, for example, 3b in tetrahydrofuran afforded coordination polymer [Cd(μ-Br)₂(thf)₂]_n (4) along with the tweezer molecule 1a. Treatment of 3b with two equiv of LiCCFc (5) gave {[Ti](μ-η¹:η²-CCSiMe₃)₂}Cd(CCFc)₂ (6) which eliminated at ambient temperature the all-carbon buta-1,3-diyne FcCC-CCFc (7) producing 1a and elemental Cd. The same reaction behavior was observed, when 2b was reacted with 5. The thus obtained bis(alkynyl) cadmium complex Cd(CCFc)₂ (8) is redox-active at low temperature producing 7 and Cd(0). When mercury halides HgX₂ (9a, X = Cl; 9b, X = Br) are used, then the titanocene dihalides [Ti]X₂ (10a, X = Cl; 10b, X = Br) together with Me₃SiCC-CCSiMe₃ (11) and Hg(0) were formed. Nevertheless, mercury acetylides were available by treatment of Hg(OAc)₂ (12) with HCCFc (13) in a 1:2 M ratio. Thus obtained Hg(CCFc)₂ (14) gave with [CuBr] (15) coordination polymer [{Hg(η²-CCFc)₂}(Cu₂(μ-Br)₂]_n (16), while with [AgPF₆] oxidation of the ferrocenyl moieties took place affording dicationic [Hg(CCFc)₂]²⁺ (18).The structures of 3b and 4 in the solid state are reported. Compound 3b shows the typical characteristics for heterobimetallic organometallic π-tweezer complexes with cadmium in a tetrahedral environment, while 4 corresponds to a one-dimensional coordination polymer in which the Cd(II) ions are linked in a edge-sharing fashion by bromide bridges in the pseudo-equatorial plane. The appropriate tetrahydrofuran molecules are completing the pseudo-octahedral coordination sphere at cadmium.The cyclic voltammogram of 14 is reported showing a single reversible redox event at E⁰ = 0.108 V with ΔE_p = 76 mV indicating that there is no communication between the Fc termini along the mercury acetylide unit.     

Formal chromium–chromium triple bonds and bent rings in the binuclear cycloheptatrienylchromium carbonyls (C7H7)2Cr2(CO)n (n = 6, 5, 4, 3, 2, 1, 0): A density functional theory study

Binuclear cycloheptatrienylchromium carbonyls of the type (C₇H₇)₂Cr₂(CO)_n (n = 6, 5, 4, 3, 2, 1, 0) have been investigated by density functional theory. Energetically competitive structures with fully bonded heptahapto η⁷-C₇H₇ rings are not found for (C₇H₇)₂Cr₂(CO)_n structures having two or more carbonyl groups. This result stands in contrast to the related (C_nH_n)₂M₂(CO)_n (M = Mn, n = 6; M = Fe, n = 5; M = Co, n = 4) systems. Most of the predicted (C₇H₇)₂Cr₂(CO)_n structures have bent trihapto or pentahapto C₇H₇ rings and CrCr distances in the range 2.4–2.5 Å suggesting formal triple bonds. In some cases rearrangement of the heptagonal C₇H₇ ring to a tridentate cyclopropyldivinyl or tridentate bis(carbene)alkyl ligand is observed. In addition structures with CO insertion into the C₇H₇–Cr bond are predicted for (C₇H₇)₂Cr₂(CO)_n (n = 6, 4, 2). The global minima found for the (C₇H₇)₂Cr₂(CO)_n derivatives for n = 6, 5, and 4 are (η⁵-C₇H₇)(OC)₂CrCr(CO)₄(η¹-C₇H₇), (η³-C₇H₇)(OC)₂CrCr(CO)₃(η^2,1- C₇H₇), and (η⁵-C₇H₇)₂Cr₂(CO)₄, respectively. The global minima for (C₇H₇)₂Cr₂(CO)_n (n = 3, 2) have rearranged C₇H₇ groups. Singlet and triplet structures with heptahapto η⁷-C₇H₇ rings are found for the dimetallocenes (η⁷-C₇H₇)₂Cr₂(CO) and (η⁷-C₇H₇)₂Cr₂, with the singlet structures being of much lower energies in both cases.     

Heterometallic Pt-Ag and Pt2Ag transition metal complexes

Complexes of type {cis-[Pt](μ-σ,π-CCPh)₂}AgX (3a, [Pt] = (bipy′)Pt, X = FBF₃; 3b, [Pt] = (bipy′)Pt, X = FPF₅; 3c, [Pt] = (bipy)Pt, X = OClO₃; 3d, [Pt] = (bipy′)Pt, X = BPh₄; bipy′ = 4,4′-dimethyl-2,2′-bipyridine; bipy = 2,2′-bipyridine) are accessible by combining cis-[Pt](CCPh)₂ (1a, [Pt] = (bipy′)Pt; 1b, [Pt] = (bipy)Pt) with equimolar amounts of [AgX] (2a, X = BF₄; 2b, X = PF₆; 2c, X = ClO₄; 2d, X = BPh₄). In 3a-3d the platinum(II) and silver(I) ions are connected by σ- and π-bonded phenyl acetylide ligands. When the molar ratio of 1 and 2 is changed to 2:1 then trimetallic [{cis-[Pt](μ-CCPh)₂}₂Ag]X (8a, [Pt] = (bipy)Pt, X = BF₄; 8b, [Pt] = (bipy′)Pt, X = PF₆; 8c, [Pt] = (bipy)Pt, X = BF₄) is produced. The solid state structure of 8a was determined by single X-ray crystal structure analysis. In 8a the silver(I) ion is embedded between two parallel oriented cis-[Pt](CCPh)₂ units. Within this structural arrangement the phenyl acetylides of individual [Pt](CCPh)₂ entities possess a μ-bridging position between Pt(II) and Ag(I). In addition, a very weak dative Pt → Ag interaction is found (Pt-Ag 2.8965(3) Å). The respective silver carbon distances Ag-C_α (2.548(7), 2.447(7) Å) and Ag-C_β (3.042(7), 2.799(8) Å)(PtC_αC_βPh) confirm this structural motif.Complexes 8a-8c isomerize in solution to form trimetallic [{cis-[Pt](μ-σ,π-CCPh)₂}₂Ag]X (9a, [Pt] = (bipy)Pt, X = BF₄; 9b, [Pt] = (bipy′)Pt, X = PF₆; 9c, [Pt] = (bipy)Pt, X = ClO₄). In the latter molecules the organometallic cation [{cis-[Pt](μ-σ,π- CCPh)₂}₂Ag]⁺ is set-up by two nearly orthogonal positioned [Pt](CCPh)₂ entities which are hold in close proximity by the group-11 metal ion. Within this assembly all four PhCC units are η²-coordinated to silver(I). A possible mechanism for the formation of 9 is presented.     

The synthesis and single-crystal X-ray structures of palladium(II) and platinum(II) complexes of the difluorovinyl and 1-chloro-2-fluorovinyl-substituted phosphines, PPh2(Z-CFCFH) and PPh2(E-CClCFH)

The coordination chemistry of the fluorovinyl substituted phosphines PPh₂(Z-CFCFH) and PPh₂(E-CClCFH) with K₂MX₄ (M = Pd, Pt; X = Cl, Br, and I) salts has been investigated resulting in the first reported palladium(II) and platinum(II) complexes of phosphines containing partially fluorinated vinyl groups. The complexes have been characterised by a combination of multinuclear [¹H, ¹³C{¹H}, ¹⁹F, ³¹P{¹H}] NMR spectroscopy, and IR/Raman spectroscopy. The single-crystal X-ray structures of trans-[PdX₂{PPh₂(CFCFH)}₂], X = Cl (1), Br (2), I (3), trans-[PdCl₂{PPh₂(CClCFH)}₂] (4), cis-[PtX₂{PPh₂(CFCFH)}₂], X = Cl (5), Br (6), trans-[PtI₂{PPh₂(CFCFH)}₂] (7), and both cis- and trans-[PtCl₂{PPh₂(CClCFH)}₂] (8), have been determined. Results obtained from spectroscopic and crystallographic data suggest that replacement of a β-fluorine by hydrogen, whilst reducing the steric demand of the ligand, has little effect on the electronic character of the ligand. The presence of a proton in the vinyl group results in short proton-halide secondary interactions in the solid state (d(H?X) = 2.72(3) for 1, and 2.92(5) Å for 2) forming an infinite chain ribbon motif.     

Coordination compounds of N,N′-olefin functionalized imidazolin-2-ylidenes

N-Heterocyclic carbene ligands (NHC) were metalated with Pd(OAc)₂ or [Ni(CH₃CN)₆](BF₄)₂ by in situ deprotonation of imidazolium salts to give the N-olefin functionalized biscarbene complexes [MX₂(NHC)₂] 3-7 (3: M = Pd, X = Br, NHC = 1,3-di(3-butenyl)imidazolin-2-ylidene; 4: M = Pd, X = Br, NHC = 1,3-di(4-pentenyl)imidazolin-2-ylidene; 5: M = Pd, X = I, NHC = 1,3-diallylimidazolin-2-ylidene; 6: M = Ni, X = I, NHC = 1,3-diallylimidazolin-2-ylidene; 7: M = Ni, X = I, NHC = 1-methyl-3-allylimidazolin-2-ylidene). Molecular structure determinations for 4-7 revealed that square-planar complexes with cis (5) or trans (4, 6, 7) coordination geometry at the metal center had been obtained. Reaction of nickelocene with imidazolium bromides afforded the η⁵-cyclopentadienyl (η⁵-Cp) monocarbene nickel complexes [NiBr(η⁵-Cp)(NHC)] 8 and 9 (8: NHC = 1-methyl-3-allylimidazolin-2-ylidene; 9: NHC = 1,3-diallylimidazolin-2-ylidene). The bromine abstraction in complexes 8 and 9 with silver tetrafluoroborate gave complexes [NiBr(η⁵-Cp)(η³-NHC)] 10 and 11. The X-ray structure analysis of 10 and 11 showed a trigonal-pyramidal coordination geometry at the nickel(II) center and coordination of one N-allyl substituent.     

1-Methyl-4-ferrocenylmethyl-3,5-diphenylpyrazole: A versatile ligand for palladium(II) and platinum(II)

The syntheses and characterization of two novel ferrocene derivatives containing 3,5-diphenylpyrazole units of general formula [1-R-3,5-Ph₂-(C₃N₂)-CH₂-Fc] {Fc = (η⁵-C₅H₅)Fe(η⁵-C₅H₄) and R = H (2) or Me (3)} together with a study of their reactivity with palladium(II) and platinum(II) salts or complexes under different experimental conditions is described. These studies have allowed us to isolate and characterize trans-[Pd{1-Me-3,5-Ph₂-(C₃N₂)-CH₂-Fc]}₂Cl₂] (4a) and three different types of heterodimetallic complexes: cis-[M{1-Me-3,5-Ph₂-(C₃N₂)-CH₂-Fc]}Cl₂(dmso)] {M = Pd (5a) or Pt (5b)}, the cyclometallated products [M{κ²-C,N-[3-(C₆H₄)-1-Me-5-Ph-(C₃N₂)]-CH₂-Fc}Cl(L)] with L = PPh₃ and M = Pd (6a) or Pt (6b) or L = dmso and M = Pt (8b) and the trans-isomer of [Pt{1-Me-3,5-Ph₂-(C₃N₂)-CH₂-Fc]}Cl₂(dmso)] (7b). In compounds 4a, 5a, 5b and 7b, the ligand behaves as a neutral N-donor group; while in 6a, 6b and 8b it acts as a bidentate [C(sp²,phenyl),N(pyrazole)]⁻ group. A comparative study of the spectroscopic properties of the compounds, based on NMR, IR and UV-Visible experiments, is also reported.     

Metal complexes of tetradentate and pentadentate N-o-hydroxybenzamido-meso-tetraphenylporphyrin ligand: M(N-NCO(o-OH)C6H4-tpp) (M = Zn2+, Ni2+, Cu2+) and M′(N-NCO(o-O) C6H4-tpp) (M′ = Mn3+) (tpp = 5, 10, 15, 20-tetraphenylporphyrinate)

The crystal structures of N-o-hydroxybenzimido-meso-tetraphenylporphyrinatozinc(II) toluene solvate [Zn(N-NCO(o-OH)C₆H₄-tpp)·C₆H₅CH₃; 4·C₆H₅CH₃], N-o-hydroxybenzimido-meso-tetraphenylporphyrinatonickel(II) chloroform solvate [Ni(N-NCO(o-OH)C₆H₄-tpp)·0.6CHCl₃; 5·0.6 CHCl₃], N-o-hydroxybenzimido-meso-tetraphenylporphyrinatocopper(II) toluene solvate [Cu(N-NCO(o-OH)C₆H₄-tpp)·C₆H₅CH₃; 6·C₆H₅CH₃] and N-o-oxido-benzimido-meso-tetraphenylporphyrinato(-κ⁴,N¹,N²,N³,N⁵,κO²) manganese (III) methylene chloride·methanol solvate [Mn(N-NCO(o-O)C₆H₄-tpp)·CH₂Cl₂·MeOH; 8·CH₂Cl₂·MeOH] were established. The coordination sphere around Zn²⁺ ion in 4·C₆H₅CH₃, (or Ni²⁺ ion in 5·0.6 CHCl₃ or Cu²⁺ ion in 6·C₆H₅CH₃) is a distorted square planar (DSP) whereas for Mn³⁺ in 8·CH₂Cl₂·MeOH, it is a distorted trigonal bipyramid (DTBP) with O(1), N(1) and N(3) lying in the equatorial plane for 8·CH₂Cl₂·MeOH. The g value of 8.27 measured from the parallel polarization of X-band EPR spectra at 293 K is consistent with the high-spin mononuclear manganese(III) (S = 2) in 8. The magnitude of axial (D) zero-field splitting (ZFS) for the mononuclear Mn(III) in 8 was determined approximately as 3.0 cm^?1 by the paramagnetic susceptibility measurements and conventional EPR spectroscopy.     

Dimeric and trimeric diorganosilicon chalcogenides (PhRSiE)2,3 (E = S, Se, Te; R = Ph, Me)

Ph₂SiCl₂ and PhMeSiCl₂ react with Li₂E (E = S, Se, Te) under formation of trimeric diorganosilicon chalcogenides (PhRSiE)₃ (R = Ph: 1a-3a, R = Me: cis/trans-4a (E = S), cis/trans-5a (E = Se)). In case of E = S, Se dimeric four-membered ring compounds (PhRSiE)₂ (R = Ph: 1b-2b, R = Me: cis/trans-4b (E = S), cis/trans-5b (E = Se)) have been observed as by-products. 1a-5b have been characterized by multinuclear NMR spectroscopy (¹H, ¹³C, ²⁹Si, ⁷⁷Se, ¹²⁵Te). Four- and six-membered ring compounds differ significantly in ²⁹Si and ⁷⁷Se chemical shifts as well as in the value of ¹J_SiSe.The molecular structures of 2a, 3a and trans-5a reported in this paper are the first examples of compounds with unfused six-membered rings Si₃E₃ (E = Se, Te). The Si₃E₃ rings adopt twisted boat conformations. The crystal structure of 3a reveals an intermolecular Te-Te contact of 3.858 Å which yields a dimerization in the solid state.     

Oxidative addition of (PhSe)2 and (FcSe)2 to zerovalent palladium and platinum trialkylphosphine complexes (Fc = ferrocenyl, [Fe(η-C5H5)(η-C5H4)])

Room temperature reaction of [Pd₂(dba)₃]/PR₃ or [Pt(C₂H₄)(PR₃)₂] (dba = dibenzylideneacetone; R = Et, Bu) with the diselenides (R′Se)₂ (R′ = Ph, Fc) yielded the oxidative addition products trans-[M(SeR′)₂(PR₃)₂] (M = Pd, Pt). These have been characterised by multinuclear NMR and UV-Vis spectroscopy, mass spectrometry, and, in the cases of trans-[Pt(SePh)₂(PR₃)₂] (R = Et, Bu) and trans-[Pt(SeFc)₂(PBu₃)₂], also by X-ray crystallography.     

Effect of ring substituents on crystal packing and H-bonding in a series of halobis(phen)copper(II) arylphosphonic acid complexes

The synthesis and crystal structures of five new analogues of the supramolecular copper(II) organophosphonate [Cu^II(phen)₂Cl][(C₆H₅PO(OH)₂)((OH)O₂PC₆H₅)] (1) are presented. The structures contain substituted phenylphosphonic acids, and are of the general formula [Cu^II(phen)₂Cl][(XPO(OH)₂)((OH)O₂PX)] · Z, where X = o-CH₃(C₆H₅) (2); X = p-CH₃(C₆H₅), Z = H₂O · 2CH₃CH₂OH (4); X = o-NO₂(C₆H₅), m-NO₂(C₆H₅) (5); X = m-NO₂(C₆H₅) (6); X = C₁₀H₇ (7).     

New mercury(II) and cadmium(II) complexes with (p-methylbenzoyl)methylene triphenylphosphorane: Synthesis,spectroscopic and structural characterization

Reaction of Ph₃PCHCOC₆H₄Me (L), with HgX₂ and CdCl₂·H₂O in methanol with equimolar ratios give binuclear complexes of the type [MX(μ-X){CH(PPh₃)C(O)C₆H₄Me}]₂ (M = Hg; X = Cl (1), Br (2), I (3), M = Cd; Cl(4)). The bridge-splitting reaction of binuclear complexes [MX(μ-X){CH(PPh₃)C(O)C₆H₄Me}]₂ by dimethyl sulfoxide (DMSO) yields the mononuclear complexes [MX₂{CH(PPh₃)C(O)C₆H₄Me}(OSMe₂)] (M = Hg; X = Cl (5), Br (6), I (7), M = Cd; Cl (8)). The characterization of these complexes was carried out by elemental analysis and FT-IR, ¹H, ³¹P, and ¹³C NMR spectroscopies. C-coordination of ylide and O-coordination of DMSO are demonstrated by single-crystal X-ray analysis of mononuclear complex of [HgBr₂{CH(PPh₃)C(O)C₆H₄Me}(OSMe₂)] (6). Complex 6 is monomeric with tetrahedral geometry around the metal ion.