Influence of radiation on MHD free convection from a vertical flat plate embedded in porous media with thermophoretic deposition of particles

Magneto-hydrodynamics and thermal radiation effects on heat and mass transfer in steady laminar boundary layer flow of a Newtonian, viscous fluid over a vertical flat plate embedded in a fluid saturated porous media in the presence of the thermophoresis particle deposition effect is studied in this paper. The governing equations are transformed by special transformations. Brownian motion of particles and thermophoretic transport are considered in the flow equations. The magnetic field is considered to be applied. Rosseland approximation is used to describe the radiative heat flux in the energy equation. The resulting similarity equations are solved numerically by the fourth-order Runge–Kutta method with shooting technique. Many results are obtained and representative set is displayed graphically to illustrate the influence of the various parameters on the wall thermophoretic deposition velocity, concentration, temperature and velocity profiles.     

Lie group analysis for thermal-diffusion and diffusion-thermo effects on free convective flow over a porous stretching surface with variable stream conditions in the presence of thermophoresis particle deposition

A study has been carried out to obtain the solutions for heat and mass transfer from natural convection flow along a vertical surface with temperature-dependent fluid viscosity embedded in a porous medium due to thermal-diffusion (Soret) and diffusion-thermo (Dufour) effects. This paper concerns with a steady two-dimensional flow of incompressible fluid over a vertical stretching sheet. The fluid viscosity is assumed to vary as a linear function of temperature. A scaling group of transformations is applied to the governing equations. The impact of thermophoresis particle deposition with chemical reaction in the presence of thermal-diffusion and diffusion-thermo effects plays an important role on the temperature and concentration boundary layer. The results thus obtained are presented graphically and discussed.     

Unsteady MHD stagnation-point flow with heat and mass transfer in a micropolar fluid in the presence of thermophoresis and suction/injection

The effect of suction or injection on unsteady MHD flow with heat and mass transfer in a micropolar fluid near the forward stagnation point flow with thermophoresis has been investigated. The problem is reduced to a system of non-dimensional partial differential equations, which are solved numerically using the implicit finite-difference scheme. Profiles for velocity, microrotation, temperature and concentration as well as the skin friction, the rate of heat and mass transfer are determined and presented graphically for physical parameters. The results show that the suction increases the skin friction, the rate of heat and mass transfer while opposite trend is observed for the case of injection. It is also found that the effect of thermophoresis is decrease the concentration boundary layer thickness.     

On the effectiveness of viscous dissipation and Joule heating on steady Magnetohydrodynamic heat and mass transfer flow over an inclined radiate isothermal permeable surface in the presence of thermophoresis

The combined effect of viscous dissipation and joule heating on steady Magnetohydrodynamic heat and mass transfer flow of viscous incompressible fluid over an inclined radiate isothermal permeable surface in the presence of thermophoresis is studied. Numerical results for the dimensionless velocity, temperature and concentration profiles as well as the local skin-friction coefficient, the local Nusselt number and the local Stanton number are displayed graphically for various physical parameters. Comparisons with previously published work are performed and the results are found to be in very good agreement. Results show that rate of heat transfer is sensitive for increasing angle of inclination parameter for the case of fluid injection and it decreases with the increase of magnetic field parameter and Eckert number.     

Effect of Hall currents and chemical reaction on hydromagnetic flow of a stretching vertical surface with internal heat generation/absorption

The problem of steady, laminar, hydromagnetic, simultaneous heat and mass transfer by laminar flow of a Newtonian, viscous, electrically conducting and heat generating/absorbing fluid over a continuously stretching surface in the presence of the combined effect of Hall currents and mass diffusion of chemical species with first and higher order reactions is investigated. The fluid is permeated by a strong transverse magnetic field imposed perpendicularly to the plate on the assumption of a small magnetic Reynolds number. Certain transformations are employed to transform the governing differential equations to a local similarity form which are solved numerically. Comparisons with previously published work have been conducted and the results are found to be in good agreement. A parametric study is performed to illustrate the influence of the magnetic field parameter, Hall parameter, the coefficients of space-dependent and temperature-dependent internal heat generation/absorption, the chemical reaction parameter and order of reaction on the fluid velocity, temperature and concentration distributions. Numerical data for the local skin-friction coefficient, the local Nusselt number and the local Sherwood number have been tabulated for various values of parametric conditions.     

Finite element analysis of hydromagnetic flow and heat transfer of a heat generation fluid over a surface embedded in a non-Darcian porous medium in the presence of chemical reaction

An analysis is carried out to study the flow, chemical reaction and mass transfer of a steady laminar boundary layer of an electrically conducting and heat generating fluid driven by a continuously moving porous surface embedded in a non-Darcian porous medium in the presence of a transfer magnetic field. The governing partial differential equations are converted into ordinary differential equations by similarity transformation and are solved numerically by using the finite element method. The results obtained are presented graphically for velocity, temperature and concentration profiles, as well as the Sherwood number for various parameters entering into the problem.     

Effect of suction/injection on free convection along a vertical plate in a nanofluid saturated non-Darcy porous medium with internal heat generation

The effect of internal heat generation on free convection along a vertical plate embedded in a nanofluid saturated non-Darcy porous medium in the presence of suction/injection is analyzed. The non-linear governing equations and their associated boundary conditions are initially cast into dimensionless forms by non-dimensional variables. The resulting equations are solved numerically by an accurate, implicit, iterative finite-difference methodology and the obtained results are compared favorably with previously published work. A parametric study is performed to illustrate influence of the temperature exponent, non-Darcy, suction/injection, Brownian motion and thermophoresis parameters on the profiles of the velocity components, temperature and nanoparticle volume fraction. The numerical data for the heat and nanoparticle mass transfer rates have been tabulated for various parametric conditions.     

Flow and heat transfer of a nanofluid over a nonlinearly stretching sheet: A numerical study

Steady, laminar boundary fluid flow which results from the non-linear stretching of a flat surface in a nanofluid has been investigated numerically. The model used for the nanofluid incorporates the effects of Brownian motion and thermophoresis. The resulting non-linear governing equations with associated boundary conditions are solved using variational finite element method (FEM) with a local non-similar transformation. The influence of Brownian motion number (Nb), thermophoresis number (Nt), stretching parameter (n) and Lewis number (Le) on the temperature and nanoparticle concentration profiles are shown graphically. The impact of physical parameters on rate of heat transfer (−θ′(0)) and mass transfer (−?′(0)) is shown in tabulated form. Some of results have also been compared with explicit finite difference method (FDM). Excellent validation of the present numerical results has been achieved with the earlier nonlinearly stretching sheet problem of Cortell [16] for local Nusselt number without taking the effect of Brownian motion and thermophoresis.     

Buoyancy and chemical reaction effects on MHD mixed convection heat and mass transfer in a porous medium with thermal radiation and Ohmic heating

The combined effect of mixed convection with thermal radiation and chemical reaction on MHD flow of viscous and electrically conducting fluid past a vertical permeable surface embedded in a porous medium is analyzed. The heat equation includes the terms involving the radiative heat flux, Ohmic dissipation, viscous dissipation and the internal absorption whereas the mass transfer equation includes the effects of chemically reactive species of first-order. The non-linear coupled differential equations are solved analytically by perturbation technique. The results obtained show that the velocity, temperature and concentration fields are appreciably influenced by the presence of chemical reaction, thermal stratification and magnetic field. It is observed that the effect of thermal radiation and magnetic field is to decrease the velocity, temperature and concentration profiles in the boundary layer. There is also considerable effect of magnetic field and chemical reaction on skin-friction coefficient and Nusselt number.     

Effects of chemical reaction and variable viscosity on hydromagnetic mixed convection heat and mass transfer for Hiemenz flow through porous media with radiation

The effect of chemical reaction and variable viscosity on hydromagnetic mixed convection heat and mass transfer for Hiemenz flow through porous media has been studied in the presence of radiation and magnetic field. The plate surface is embedded in a uniform Darcian porous medium in order to allow for possible fluid wall suction or blowing and has a power-law variation of both the wall temperature and concentration. The similarity solution is used to transform the system of partial differential equations, describing the problem under consideration, into a boundary value problem of coupled ordinary differential equations, and an efficient numerical technique is implemented to solve the reduced system. Numerical calculations are carried out, for various values of the dimensionless parameters of the problem, which include a variable viscosity, chemical reactions, radiation, magnetic field, porous medium and power index of the wall temperature parameters. Comparisons with previously published works are performed and excellent agreement between the results is obtained. The results are presented graphically and the conclusion is drawn that the flow field and other quantities of physical interest are significantly influenced by these parameters.     

A fitted numerical method to investigate the effect of various parameters on an MHD flow over an inclined plate

We design a suitable fitted operator finite difference method (FOFDM) to solve a model of an unsteady transient magnetohydrodynamic (MHD) free convective and mass transfer flow with thermophoresis past an inclined permeable plate in the presence of chemical reaction, thermal radiation, and temperature dependent viscosity. The governing nonlinear partial differential equations in the current model are transformed by a suitable similarity transformation into a system of ordinary differential equations which are then solved numerically using the FOFDM. The superiority of the proposed FOFDM over the standard finite difference method is proved theoretically and numerically. Furthermore, we illustrate the effect of various parameters on the temperature, concentration and velocity profiles using the FOFDM. It is observed that an increase in the viscosity parameter leads to a decrease in the temperature and an increase in the velocity. Results also show that an increase in the thermophoretic parameter leads to a decrease in the concentration. © 2015 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 32: 106–120, 2016     

Convective heat and mass transfer in three-dimensional mixed convection flow of viscoelastic fluid in presence of chemical reaction and heat source/sink

Heat and mass transfer effects in the three-dimensional mixed convection flow of a viscoelastic fluid with internal heat source/sink and chemical reaction have been investigated in the present work. The flow generation is because of an exponentially stretching surface. Magnetic field normal to the direction of flow is considered. Convective conditions at the surface are also encountered. Appropriate similarity transformations are utilized to reduce the boundary layer partial differential equations into the ordinary differential equations. The homotopy analysis method is used to develop the solution expressions. Impacts of different controlling parameters such as ratio parameter, Hartman number, internal heat source/sink, chemical reaction, mixed convection, concentration buoyancy parameter and Biot numbers on the velocity, temperature and concentration profiles are analyzed. The local Nusselt and Sherwood numbers are sketched and examined.     

具有蒸发液滴两相介质近壁流动的数学分析

在双连续介质理论框架下，采用匹配渐进展开方法导出并求解了具有蒸发液滴的汽雾流中层流边界层方程，给出了控制汽雾流的相似判据。对于沿曲面的流动，边界层方程的形式取决于是否存在液滴的惯性沉积。给出了热钝体驻点附近蒸汽－液滴边界层的数值计算结果。它们表明：由于蒸发，在边界层内近壁处形成了一个无液滴区域；在该区上边界处，液滴半径趋于零而液滴数密度急剧增高。液滴蒸发及聚集的联合效应造成了表面热流的显著增加，甚至在自由来流中液滴质量浓度很低时此效应依然存在。     

Study of hydromagnetic heat and mass transfer flow over an inclined heated surface with variable viscosity and electric conductivity

The effects of variable electric conductivity and temperature dependent viscosity on hydromagnetic heat and mass transfer flow along a radiate isothermal inclined permeable surface in a stationary fluid in the presence of internal heat generation (or absorption) are analyzed numerically presenting local similarity solutions for various values of the physical parameters. The research shows that the difference in the results between variable Prandtl number and constant Prandtl number are significant when fluid viscosity strongly dependents on the temperature. The results also show that skin friction coefficient, Nusselt number and Sherwood number are lower for the fluids of constant electric conductivity than those of the variable electric conductivity.     

Effect of the chemical reaction and radiation absorption on the unsteady MHD free convection flow past a semi infinite vertical permeable moving plate with heat source and suction

Analytical solutions for heat and mass transfer by laminar flow of a Newtonian, viscous, electrically conducting and heat generation/absorbing fluid on a continuously vertical permeable surface in the presence of a radiation, a first-order homogeneous chemical reaction and the mass flux are reported. The plate is assumed to move with a constant velocity in the direction of fluid flow. A uniform magnetic field acts perpendicular to the porous surface, which absorbs the fluid with a suction velocity varying with time. The dimensionless governing equations for this investigation are solved analytically using two-term harmonic and non-harmonic functions. Graphical results for velocity, temperature and concentration profiles of both phases based on the analytical solutions are presented and discussed.     

A Lagrangian simulation of particle deposition in a turbulent boundary layer in the presence of thermophoresis

Knowledge of particle deposition in turbulent flows is often required in engineering situations. Examples include fouling of turbine blades, plate-out in nuclear reactors and soot deposition. Thus it is important for numerical simulations to be able to predict particle deposition. Particle deposition is often principally determined by the forces acting on the particles in the boundary layer. The particle tracking facility in the CFD code uses the eddy lifetime model to simulate turbulent particle dispersion, no specific boundary layer being modelled. The particle tracking code has been modified to include a boundary layer. The non-dimensional yplus, y⁺, distance of the particle from the wall is determined and then values for the fluid velocity, fluctuating fluid velocity and eddy lifetime appropriate for a turbulent boundary layer used. Predictions including the boundary layer have been compared against experimental data for particle deposition in turbulent pipe flow. The results giving much better agreement. Many engineering problems also involve heat transfer and hence temperature gradients. Thermophoresis is a phenomena by which small particles experience a force in the opposite direction to the temperature gradient. Thus particles will tend to deposit on cold walls and be repulsed by hot walls. The effect of thermophoresis on the deposition of particles can be significant. The modifications of the particle tracking facility have been extended to include the effect of thermophoresis. A preliminary test case involving the deposition of particles in a heated pipe has been simulated. Comparison with experimental data from an extensive experimental programme undertaken at ISPRA, known as STORM (Simplified Tests on Resuspension Mechanisms), has been made.     

Laminar compressible boundary layer flow at a three-dimensional stagnation point with vectored mass transfer

The effect of surface mass transfer velocities having normal, principal and transverse direction components (‘vectored’ suction and injection) on the steady, laminar, compressible boundary layer at a three-dimensional stagnation point has been investigated both for nodal and saddle points of attachment. The similarity solutions of the boundary layer equations were obtained numerically by the method of parametric differentiation. The principal and transverse direction surface mass transfer velocities significantly affect the skin friction (both in the principal and transverse directions) and the heat transfer. Also the inadequacy of assuming a linear viscosity-temperature relation at low-wall temperatures is shown.     

Qualitative analysis of unsteady heat and mass transfer modes in a boundary layer with chemical reactions and intensive detections : PMM vol. 42, no. 6, 1978, pp. 1056–1067

The effect of chemical reactions in the gas phase on unsteady heat and mass transfer in the neighborhood of the leading stagnation point of a streamlined body is investigated using the qualitative theory of dynamic systems. The necessary and sufficient conditions of uniqueness and stability of steady heat and mass transfer modes are formulated.     

饱和纳米流体多孔介质中竖直嵌入板上边界层的非Newton流

在层流条件下,对饱和多孔介质中的竖直板,研究幂指数型非Newton流的自由对流热交换.非Newton纳米流体服从幂指数型的数学模型,模型综合考虑了Brown运动和热泳的影响.通过相似变换,将问题的偏微分控制方程组,转化为常微分方程组,得到了常微分方程组的数值解.数值解依赖于幂指数n,Lewis数Le,浮力比Nr,Brown运动参数Nb,以及热泳参数Nt.在n和Le的不同取值下,研究并讨论了对相关流体性质参数的影响和简化的Nusselt数.     

Effect of Chemical reaction on MHD flow of a visco-elastic fluid through porous medium.

The effect of heat and mass transfer on free convective flow of a visco-elastic incompressible electrically conducting fluid past a vertical porous plate through a porous medium with time dependant oscillatory permeability and suction in the presence of a uniform transverse magnetic field, heat source and chemical reaction has been studied in this paper. The novelty of the present study is to analyze the effect of chemical reaction, time dependant fluctuative suction and permeability of the medium on a visco-elastic fluid flow. It is interesting to note that presence of sink contributes to oscillatory motion leading to flow instability. Further it is remarked that presence of heat source and low rate of thermal diffusion counteract each other in the presence of reacting species.