Glass formation and structure of glasses in the ZnO―Bi2O3―WO3―MoO3 system

The glass formation region in the ternary ZnO―Bi₂O₃―WO₃ system is determined by melt quenching technique (cooling rates 10¹-10² K/s). New original glasses are obtained in a narrow concentration range with high WO₃ content (60-75 mol%). Homogeneous glasses of the composition (100 − x)[0.2ZnO·0.3Bi₂O₃·0.5WO₃]xMoO₃, were obtained between 20 and 60 mol% MoO₃. Characterization of the amorphous samples was made by x-ray diffraction (XRD), differential thermal analysis (DTA) and infrared spectroscopy (IR). The thermal stability of glasses decreases with the increasing of MoO₃ content. The glass transition temperature, T_g, varies between 340-480 °C, while the crystallization temperature, T_x, varies between 388-531 °C. The tungstate glasses possess higher crystallization temperature (T_x over 500 °C) in comparison with the other vanadate and molybdate non-traditional glasses. The glass network is realized by transformation of three-dimensional structure of WO₃ into a layered one, consisting mainly of WO₆ units. We supposed that the network of quaternary glasses is built up by MoO₄, MoO₆ and WO₆. At low concentration ZnO and Bi₂O₃ facilitate the disorder in the supercooled melts, while at high concentration stimulate crystallization processes. These oxides belong to the intermediate ones.     

Glass formation and structure of glasses in B2O3―Bi2O3―MoO3 system

The purpose of this paper is to study the glass formation tendency in the ternary system B₂O₃―Bi₂O₃―MoO₃ and to define the main structural units building the amorphous network. A wide glass formation area was determined which is situated near the Bi₂O₃―B₂O₃ side. A liquid phase separation region was observed near the MoO₃―B₂O₃ side for compositions containing below 25 mol% Bi₂O₃ and their microheterogeneous structure was observed by SEM. The phase formation was characterized by X-ray diffraction (XRD). By DTA was established the glass transition temperature (T_g) in the range of 380-420 °C and crystallization temperature (T_x) vary between 420 and 540 °C. The main building units forming the amorphous network are BO₃ (1270 and 1200 cm^− 1), BO₄ (930-880, 1050-1040 cm^− 1), MoO₄ (840-760 cm^− 1) and BiO₆ (470 cm^− 1). It was proved that Bi₂O₃ favors the BO₃ → BO₄ transformations while MoO₃ preserves BO₃ units in the amorphous network.     

EPR study of crystalline and vitreous forms of the Li2OAl2O3SiO2 system

The epr spectra of V⁴⁺ and radiation centres have been studied in β-eucryptite (LiAlSiO₄), β-, γ-spodumene (LiAlSi₂O₆) and in glasses prepared by the fusion of the single crystals. It is shown that the electronic structures of the vitreous state in the Li₂OAl₂O₃SiO₂ system and that of the crystalline forms differ considerably. The change of the electronic structure on crystallization is not direct, but is realized through the intermediate state whose electronic structure differs from that of glasses and crystals.     

Nuclear magnetic resonance studies of the glasses in the system Na2OB2O3SiO2

The ¹¹B NMR spectra have been used to study the structure of glasses in the system Na₂OB₂O₃SiO₂. The fraction of BO₄ units, and the fraction of BO₃ units with one or two nonbridging oxygens, are measured and analyzed according to a structural model. The results indicate that: (1) for a sodium oxide to boron oxide ratio of 0.5 or less, the Na⁺¹ ions are attracted primarily by the borate network; therefore, the ternary glasses can be viewed as binary sodium borate glasses diluted by SiO₂; (2) when the sodium oxide to boron oxide ratio exceeds 0.5, the additional Na₂O results in the formation of [BSi₄O₁₀]^?1 units at the expense of diborate and SiO₄ units. In this process, Na⁺¹ ions are still taken up only by the borate network. After all the available SiO₄ units are consumed to form [BSi₄O₁₀]^?1 units, additional Na⁺¹ ions are proportionally shared between the borate and silicate networks.     

Glass formation and structure of Na2SSiO2 and Na2SB2O3 glasses

Glass-forming regions of the systems Na₂SSiO₂ and Na₂SB₂O₃ have been investigated in order to clarify whether Na₂S could be substituted for Na₂O in sodium silicate or borate glasses, and the results were interpreted in terms of the structures of silicate and borate glasses. No difference was found in the glass-forming range of SiO₂ content between the Na₂SSiO₂ and Na₂OSiO₂ systems, and the red color of Na₂SSiO₂ glasses suggests that the formation of polysulfides in the glass structure is probably due to the entrance of sulfur ions in the non-bridging sites of the glass network. On the other hand, not all of the sulfur added to the glass batches could be retained in the Na₂SB₂O₃ glasses and the amount remaining in the glass products changed depending upon the amount of sodium ions in the glasses. Only a trace of sulfur was observed in the glasses containing less than 13 mol% of Na₂S in the batches, but the sulfur content in the glasses increased steeply with sodium content up to 35 mol%, reached the maximum and then decreased slowly with sodium content. The insolubility of sulfur in the glasses with low sodium content was interpreted based on the compositional dependence of basicity of alkali-borate glasses, and the change in solubility of sulfur with sodium concentration was explained based on the well-known boron anomaly caused by the change in the coordination state of boron and on the formation of non-bridging oxygens or sulfurs in the glass structure.     

Glasses and glass-ceramics from naturally occurring CaOMgOAl2O3SiO2 materials (I) glass formation and properties

Once oil is extracted from oil shales, the inorganic solid which remains is from the CaOMgOAl₂O₃SiO₂ system. The material is easily melted and forms a glass upon cooling. Its viscosity in the forming region is actually less than that of commercial soda-lime glass. Shale glasses exhibit excellent dielectric behavior, while their other properties are generally comparable to commercial glasses. These glasses appear to be promising materials for future applications.     

Brillouin scattering measurements of attenuation and velocity of hypersounds in SiO2B2O3 glasses

Measurements of hypersound wave velocity and attenuation (20–30 GHz) were made at room temperature by Brillouin scattering in SiO₂O₂O₃ glasses. The attenuation shows a maximum with composition. An explanation of this maximum is given in relation to the glass structure. It is thought that this maximum may be due to a coupling effect of hypersounds with structural relaxational process involving SiSi and SiOB bonds.     

Mössbauer study in the glass system PbO · 2B2O3 · Fe2O3

The Mössbauer technique has been employed to study the structure and crystallite formation in the glass system PbO · 2B₂O₃ containing upto 30 wt% Fe₂O₃. Like alkali borate glasses, this glass system also exhibits a broadened quadrupole doublet and iron ions are present in Fe³⁺ state. Above about 20 wt%, the crystallites of magnetically ordered states have been identified. Susceptibility variation with concentration suggests the formation of a superparamagnetic state.     

11B and 27Al NMR studies of glasses in the system Na2OB2O3Al2O3 (“NABAL”)

¹¹B and ²⁷Al nuclear magnetic resonances (NMR) in glasses of the NABAL system Na₂OB₂O₃Al₂O₃ have been studied as a function of composition. From the boron data, the fraction of four-coordinated BO₄ units has been determined via computer analysis of the NMR spectra; the method is similar to that employed previously for binary and other ternary borate glasses. The ²⁷Al NMR indicates no abrupt change in the average aluminum environment. Certain linear relationships have been found which yield detailed information on the competing processes of BO₃, BO₄ and AlO₄ formation, and the formation of triclusters consisting of three tetrahedra having one oxygen in common. Furthermore, it is concluded that the oxygen available for the formation of various aluminum-containing species is a function of the soda concentration only and that the conversion to AlO₄ is favored as compared with BO₄.     

Controlling metal–insulator transition in the hetero-epitaxial VO2/TiO2 bilayer grown on Al2O3

Hetero-epitaxial VO₂/TiO₂ bilayers were synthesized on Al₂O₃ substrates by using pulsed laser deposition, and their physical properties with the changes of oxygen pressure and the substrate orientation were investigated. A metal–insulator transition of the VO₂ was observed only in a narrow oxygen pressure range of 5–20 mTorr. As the oxygen pressure increased, X-ray diffraction peak for the (2 0 0)VO₂ shifted to a lower 2θ position, while the metal–insulator transition temperature (T_MI) decreased by ∼7 K. On the other hand, T_MI was largely varied with substrate orientation. The (2 0 0)VO₂/TiO₂ on the c-plane sapphire showed the highest T_MI of about 350 K, while the (0 0 2)VO₂/TiO₂ on the m-plane sapphire displayed the lowest T_MI of about 310 K. The (1 0 1)VO₂/TiO₂ on the r-plane and the a-plane exhibited T_MI∼340 and 330 K, respectively. The observed variations of T_MI with the oxygen pressure and substrate orientation were presumably due to the change in oxygen content of the VO₂ layer and/or in lattice strain.     

Infrared spectra and structure of superionic conducting glasses in the system AgIAg2OMoO3

Thin blown films of glasses with the mole ratio Ag₂O/MoO₃ = 1 in the system AgIAg₂OMoO₃ (or the pseudobinary system AgIAg₂MoO₄) show three absorption bands in the range 4000-200 cm^?1; 875 cm^?1 (w), 780 cm^?1 (s), and 320 cm^?1 (m, b), which are characteristic of tetrahedral MoO₄^2? ions. The glasses with the ratio Ag₂O/MoO₃ < 1 have two additional bands at 600 cm^?1 (w) and 450 cm^?1 (vw), which are characteristic of condensed ions of MoO₄ tetrahedra, probably Mo₂ O₇^2? ions. These glasses are thus composed of Ag⁺, I^?, MoO₄^2?, and probably Mo₂O₇^2? ions, and classified as “ionic” glasses containing one type of cations. The presence of partial covalency in the Ag⁺… ^?OMo link and the influence of ion exchange of Ag⁺ with K⁺ on IR spectra are discussed. The molar volume of the glasses with the ratio Ag₂O/MoO₃ = 1 is primarily determined by a fairly dense packing of the constituent anions, I^? and MoO₄^2?.     

自润滑Al2O3/TiC/CaF2复合陶瓷材料摩擦特性

为了探索自润滑陶瓷材料的开发及应用,采用冷压烧结工艺制备Al2O3/TiC/CaF2自润滑复合陶瓷材料。在摩擦磨损实验机上对其进行摩擦磨损实验,并对其摩擦磨损行为及自润滑效应进行分析。结果表明:在实验过程中,Al2O3/TiC/CaF2复合陶瓷材料物理机械性能优于同条件下制备的Al2O3/TiC复合陶瓷材料,且具有较低的摩擦因数和磨损率,其减摩抗磨效果明显,具有一定的自润滑效应,其减摩抗磨机理为摩擦驱动下CaF2存在于摩擦副表面,形成减摩抗磨层,在表面形成一层平整、光滑的自润滑层,增加摩擦表面实际接触面积,起到自润滑效应。     

Nd2O3对Al2O3基复合陶瓷耐磨性能及微观结构的影响

在Ca O-Mg O-Si O2作为复合烧结助剂降低氧化铝陶瓷温度的前提下,研究不同添加量的稀土氧化物Nd2O3对陶瓷烧结温度、磨损率、显微结构的影响。通过设计Nd2O3在六铝酸钙中固溶和Nd2O3在Al2O3单晶表面扩散的实验,探索Nd2O3对氧化铝陶瓷耐磨性能影响的机理。结果表明:加入过量的Nd2O3会破坏晶界结合强度,导致陶瓷的耐磨性能变差;而少量Nd2O3的加入能有效提高晶界间结合强度和陶瓷的致密度,改善耐磨性能,耐磨性提高幅度约42.7%。     

原位生成Fe-Al/Al2O3复合陶瓷涂层

采用化学镀法制备Fe包覆Al核(Al)-壳(Fe)结构复合粉体,以Fe-Al复合粉体为喷涂材料,利用等离子喷涂法在Q235钢基体上制备涂层,在喷涂过程中Fe、Al反应生成Fe-Al金属间化合物和Al2O3,通过控制Fe-Al和Al2O3粉体的混合比例实现涂层的梯度化。利用SEM、XRD研究涂层微观结构与组成,并测试分析了涂层的抗热震性与结合强度。结果表明,涂层主要由Al2O3、Al、Fe3Al和Fe O等组成,喷涂过程中Fe-Al发生反应原位生成了Fe3Al金属间化合物,以Fe-Al为底层的Fe Al/Al2O3梯度涂层的结合强度和抗热震性均明显高于Al2O3涂层,涂层成分的梯度分布和Fe3Al的原位形成改善了涂层的结合状态,提高了结合强度和抗热震性。     

Invar effect in n-Nb2O5, αht-Nb2O5, and L-Nb2O5

An X-ray diffraction analysis of two commercial sets of niobium pentaoxide (Nb₂O₅) of Nbo-Pt grade has been performed. Each set reveals the coexistence of three modifications: n-Nb₂O₅, α_ht-Nb₂O₅, and L-Nb₂O₅. Anomalous behavior in the structural characteristics, with the occurrence of plateaus upon heating (the invar effect), is established for each phase. It is suggested that the coincidence of the temperature ranges with constant unit-cell parameters in Nb₂O₅ and complex Nb-containing oxides indicates the unified nature of the invar effect, which is related to the defect state of objects under study. Original Russian Text ? L.A. Reznichenko, V.V. Akhnazarova, L.A. Shilkina, O.N. Razumovskaya, S.I. Dudkina, 2009, published in Kristallografiya, 2009, Vol. 54, No. 3, pp. 517–526.     

Photoconductivity of oxychalcogenide glasses in the system As2Se3CdO

The photoconductivity of oxychalcogenide glasses in the system As₂Se₃CdO was investigated. When 2–3 mol % CdO was added, the photoresponse peak of the parent glass As₂Se₃ in the vicinity of 740 nm became broader and a little weaker. The addition of more than about 4 mol % CdO brought about a sharp and strong peak at 720 nm and a broad peak at 860 nm. X-ray diffraction and electron microscopic observations revealed the presence of crystalline CdSe in the glass matrix, indicating that the reaction As₂Se₃ + 3CdO → As₂O₃ + 3CdSe took place in the melting process of these glasses. Tempeature and light intensity dependences of the photocurrent lead to the conclusion that the above spectral photoresponse is greatly affected by the presence of the dispersed crystalline CdSe.     

A new modification of Ba[B5O8(OH)] · H2O, the refined structure of Ba2[B5O9]Cl · 0.5H2O, and the role of the pentaborate structural units in the formation of the quadratic optical nonlinearity

The structure of a new modification of the barium pentaborate β-Ba[B₅O₈(OH)] · H₂O synthesized under hydrothermal conditions is investigated. This structure differs from the previously studied structure of the α-Ba[B₅O₈(OH)] · H₂O compound by a shorter interlayer spacing and a higher degree of filling of the intersheet space with water molecules and barium atoms (the space group P is retained). The structure of the Ba₂[B₅O₉] Cl · 0.5H₂O pentaborate from the family of orthorhombic hilgardites (space group Pnn2) is refined, and the property of this crystal to generate the second optical harmonic is revealed. It is found that the previously studied pentaborate Ba₅[B₂₀O₃₃(OH)₄]H₂O exhibits a nonlinear optical activity. The relationship between the structure and properties of hydrous and anhydrous pentaborates is discussed. Original Russian Text ? E.L. Belokoneva, S.Yu. Stefanovich, M.A. Erilov, O.V. Dimitrova, N.N. Mochenova, 2008, published in Kristallografiya, 2008, Vol. 53, No. 2, pp. 255–263.     

Glass formation in the systems (K or Cs)2O(Nb or Ta)2O5Al2O3

The glass-forming ability of melts in the systems K₂O(Nb and/or Ta)₂O₅Al₂O₃ as well as those in which K₂O was replaced with Li₂O, Na₂O, Cs₂O, BaO or PbO was investigated. Some melts in the systems (K or Cs)₂O(Nb and/or Ta)₂O₅Al₂O₃ could be made into glasses by cooling, yielding practically useful amounts. The structures of these glasses were discussed on the basis of their infrared spectroscopic and X-ray emission spectroscopic analyses.     

Short range antiferromagnetic ordering in vitreous Fe2O3P2O5

An outline is given of the theory of neutron magnetic scattering from amorphous materials, and data are presented for vitreous 0.79 Fe₂O₃ · P₂O₅. The magnetic correlation function shows that at low temperatures the glass exhibits short-range antiferromagnetic ordering with Fe³⁺?Fe³⁺ interionic distances similar to those found in crystalline FePO₄. The neutron data are not consistent with a previous suggestion that the material is microcrystalline.