Fabrication and properties of novel low-melting glasses in the ternary system ZnO-Sb2O3-P2O5

Glasses in the ternary system ZnO-Sb₂O₃-P₂O₅ were investigated as potential alternatives to lead based glasses for low temperature applications. The glass-forming region of ZnO-Sb₂O₃-P₂O₅ system has been determined. Structure and properties of the glasses with the composition (60 − x)ZnO-xSb₂O₃-40P₂O₅ were characterized by infrared spectra (IR), differential thermal analysis (DTA) and X-ray diffraction (XRD). The results of IR indicated the role of Sb³⁺ as participant in glass network structure, which was supported by the monotonic and remarkable increase of density (ρ) and molar volume (V_M) with increasing Sb₂O₃ content. Glass transition temperature (T_g) and thermal stability decreased, and coefficient of thermal expansion (α) increased with the substitution of Sb₂O₃ for ZnO in the range of 0-50 mol%. XRD pattern of the heat treated glass containing 30 mol% Sb₂O₃ indicated that the structure of antimony-phosphate becomes dominant. The improved water durability of these glasses is consistent with the replacement of easily hydrated phosphate chains by corrosion resistant P-O-Sb bonds. The glasses containing ?30 mol% Sb₂O₃ possess lower T_g (<400 °C) and better water durability, which could be alternatives to lead based glasses for practical applications with further composition improvement.     

Synthesis and physical properties of glasses in the Sb2O3-PbCl2-MoO3 system

Lead chloroantimonite glasses form stable binary glasses that may accommodate numerous oxides or halides as a third component. Molybdenum trioxide is a glass progenitor leading to molybdate glasses. Ternary glasses have been synthesized and studied in the Sb₂O₃-PbCl₂-MoO₃ system. Compositional limits of glass formation are reported and two series of glass samples have been prepared corresponding to the general formulas: (90 − x)Sb₂O₃-xPbCl₂-10MoO₃ and (90 − x)Sb₂O₃-xMoO₃-10PbCl₂. Glass transition temperature is close to 290 °C at high Sb₂O₃ content and decreases as antimony oxide is substituted by MoO₃ or PbCl₂. Position, width and intensity of crystallization peak suggest that devitrification rate is small in some composition ranges. The evolution of density, thermal expansion, refractive index and microhardness has been studied as a function of composition parameter x. Deviations from linearity are observed. They suggest structural changes in the case of the MoO₃/Sb₂O₃ substitution while it appears that molar volume increases linearly versus lead content in the other series of glasses. Refractive index is close to 2.04. Optical transmission ranges from 550 nm in the visible spectrum to 5.5 μm in the infrared. It is limited by extrinsic absorption bands arising from hydroxyls and silicon impurities. Young's, bulk and shear moduli have been measured for the two series of samples.     

Spectral properties of PbO-P2O5 glasses

The optical absorption spectra of xPbO-(100 − x) P₂O₅ glasses where x = 5, 10, 15, 20, 25, and 30 is reported. The spectral absorption of these glasses was measured in the spectral range 300-900 nm at room temperature. Optical absorption spectra show that the absorption edge has a tail extending towards lower energies. The edge shifts nearly linearly towards higher energies with increasing PbO content. The degree of the edge shift was found to depend on the PbO content and is mostly related to the structural rearrangement and the relative concentrations of the glass basic units. The optical energy gap increases, from 2.55 to 3.05 eV by increasing PbO content from 5 to 30 mol%. The width of the localized states is decreased by increasing PbO content.     

EPR study of RLi2O.V2O5, RNa2O.V2O5, RCaO.V2O5, and RBaO.V2O5 modified vanadate glass systems

Experimental EPR spectra in several modified vanadate glass systems reveal hyperfine structure (hfs) lines whose widths vary with the molar ratio of modifier to vanadium pentoxide, R. In the RNa₂O.V₂O₅ system, for example, hfs lines show no resolution at low R values (near 0.1); by contrast, these lines exhibit dramatic narrowing as R approaches 0.5. In the model proposed here, this narrowing is due to an increase in hopping time for small polarons associated with V⁴⁺ ions in these systems. Increases in polaron hopping times are accompanied by increases in electron spin-spin relaxation times T₂'s, and, an associated narrowing of EPR linewidths. Experiments confirm that spectral widths are limited by electron T₂'s due to the fact that EPR linewidths do not vary with temperature down to 4.2 K. Resolved spectra in RNa₂O.V₂O₅ at R = 0.5 reveal a hyperfine coupling parameter of 0.0177 ± 0.0008 T, corresponding to an upper-limit polaron hopping frequency of 487 ± 20 MHz. By similar analyses, the systems of RCaO.V₂O₅, RBaO.V₂O₅, and RLi₂O.V₂O₅ exhibit comparable polaron hopping frequencies limits of 480 ± 20 MHz, 469 ± 20 MHz, and 468 ± 20 MHz, respectively, when R is near 1.0. In addition to the relaxation effects discussed here, results of modeling of resolved spectra to obtain hyperfine coupling constants A_|| and A_┴, and g_┴ values g_|| and g_┴ are presented and discussed.     

Vibrational, EPR and optical spectroscopy of the Cu doped glasses with (90-x)TeO2-10GeO2-xWO3 (7.5 ≤ x ≤ 30) composition

Infrared, EPR and optical absorption studies on (90-x)TeO₂-10GeO₂-xWO₃ (7.5 ≤ x ≤ 30) glasses containing Cu²⁺ spin probe have been carried out. The Infrared spectral studies show that the structure of glass network consists of [TeO₄], [TeO₃]/[TeO_3 + 1], [WO₄], [WO₆] and [GeO₆] units in the disordered manner. Physical parameters such as density (ρ), molar volume (V_m), oxygen packing density (OPD), oxygen molar volume (V_o), optical basicity (Λ), oxide ion polarizability (α_O²⁻), inter ionic distances and the concentration of ions per unit volume of Te, Ge, W, Cu and O have been determined. The spin-Hamiltonian parameters (g_||, g_⊥ and A_||) of Cu²⁺ ions in the present glasses have been estimated from EPR spectra at 300 K. Bonding parameters such as α², β₁², β², Γ_σ, and Γ_π have been calculated from both optical absorption and EPR data. The observed variations in spin-Hamiltonian parameters and bonding parameters have been correlated to the structural modifications due to the WO₃ incorporation into the TeO₂ glass network at constant 10 mol% GeO₂ content.     

Bioactive glasses in the system CaO-B2O3-P2O5: Preparation, structural study and in vitro evaluation

Glasses in the system x B₂O₃(1 − x) [y CaO P₂O₅], (x = 0, 0.1, 0.2, 0.3, y = 2, 2.6, 3, 4, 5) have been prepared by fast quenching of high temperature melts. The presence of B₂O₃ affected the glass forming ability, allowing the preparation of calcium phosphate glasses with y ? 2.6. The structure of glasses was analyzed by μ-Raman and infrared spectroscopy. The analysis indicated that the glass network is dominated by highly charged species from phosphate tetrahedra with 3 (pyro) or 4 (ortho) NBOs, while the boron atoms are incorporated mainly in 3 coordinated sites in the form of B∅₃ or B∅₂O⁻ units. A small fraction of units was also evident from the spectra analysis of glasses with high CaO content. All calcium borophosphate glasses exhibited bioactivity after soaking in SBF solution within a few days. This was observed by μ-Raman and SEM microscopy, while XRD patterns clearly revealed growth of hydroxyapatite phase. The presence of boron in the glass network has a catalytic effect at favoring bioactivity of the otherwise bioinert calcium phosphate glasses.     

Structural analysis and devitrification of glasses based on the CaO-MgO-SiO2 system with B2O3, Na2O, CaF2 and P2O5 additives

Glasses, whose basic composition was based on the CaO-MgO-SiO₂ system and doped with B₂O₃, P₂O₅, Na₂O, and CaF₂, were prepared by melting at 1400 °C for 1 h. Raman and infrared (IR) spectroscopy revealed that the main structural units in the glass network were predominantly Q¹ and Q² silicate species. The presence of phosphate and borate units in the structure of the glasses was also evident in these spectra. X-ray analysis showed that the investigated glasses devitrified at 750 °C and higher temperatures. The crystalline phases of diopside and wollastonite dominated, but weak peaks, assigned to akermanite and fluorapatite, were also registered in the diffractograms. The presence of B₂O₃, Na₂O, and CaF₂ had a negligible influence on the assemblage of the crystallized phases, but it caused a reduction of crystallization temperature, comparing to similar glasses of the CaO-MgO-SiO₂ system.     

Electrical transport properties of 0.5Li2O-0.5M2O-2B2O3 (M = Li, Na and K) glasses

Transparent glasses in the system 0.5Li₂O-0.5M₂O-2B₂O₃ (M = Li, Na and K) were fabricated via the conventional melt quenching technique. The amorphous and glassy nature of the samples was confirmed via the X-ray powder diffraction and the differential scanning calorimetry, respectively. The frequency and temperature dependent characteristics of the dielectric relaxation and the electrical conductivity were investigated in the 100 Hz-10 MHz frequency range. The imaginary part of the electric modulus spectra was modeled using an approximate solution of Kohrausch-Williams-Watts relation. The stretching exponent, β, was found to be temperature independent for 0.5Li₂O-0.5Na₂O-2B₂O₃ (LNBO) glasses. The activation energy associated with DC conduction was found to be higher (1.25 eV) for 0.5Li₂O-0.5K₂O-2B₂O₃ (LKBO) glasses than that of the other glass systems under study. This is attributed to the mixed cation effect.     

Study of CaO-WO3-P2O5 glass system by dielectric properties, IR spectra and differential thermal analysis

Dielectric constant ε^′, loss tanδ and ac conductivity σ_ac of 40CaO-xWO₃-(60−x)P₂O₅ (with 0?x?15) glasses are studied over a range of frequencies and temperature. The dielectric breakdown strength of these glasses is also determined at room temperature. The values of dielectric parameters, viz., ε^′, tanδ and σ_ac of CaO-P₂O₅ glasses are found to decrease with the introduction of WO₃ up to 3 mol% and increase with further increase in the concentration of WO₃; the probable reasons for such an increase are identified and explained with the aid of IR spectra and differential thermal analysis of these glasses. The variation of tanδ with temperature at different frequencies of CaO-P₂O₅ glasses has exhibited dielectric relaxation effects with decreasing relaxation intensity with increase in the concentration of WO₃ from 0 to 3 mol%; such relaxation effects seem to have been absent in glasses containing WO₃ beyond 3 mol%. The relaxation phenomenon has been analysed by a pseudo-Cole-Cole plot method and the possible mechanism responsible for such relaxation effects has been suggested.     

Effects of Nb2O5 Replacement by Er2O3 on elastic and structural properties of 75TeO2-(10 − x)Nb2O5-15ZnO-(x)Er2O3 glass

Tellurite 75TeO₂-(10 − x)Nb₂O₅-15ZnO-(x)Er₂O₃; (x = 0.0-2.5 mol%) glass system with concurrent reduction of Nb₂O₅ and Er₂O₃ addition have been prepared by melt-quenching method. Elastic properties together with structural properties of the glasses were investigated by measuring both longitudinal and shear velocities using the pulse-echo-overlap technique at 5 MHz and Fourier Transform Infrared (FTIR) spectroscopy, respectively. Shear velocity, shear modulus, Young's modulus and Debye temperature were observed to initially decrease at x = 0.5 mol% but remained constant between x = 1.0 mol% to x = 2.0 mol%, before increasing back with Er₂O₃ addition at x = 2.5 mol%. The initial drop in shear velocity and related elastic moduli observed at x = 0.5 mol% were suggested to be due to weakening of glass network rigidity as a result of increase in non-bridging oxygen (NBO) ions as a consequence of Nb₂O₅ reduction. The near constant values of shear velocity, elastic moduli, Debye temperature, hardness and Poisson's ratio between x = 0.5 mol% to x = 2.0 mol% were suggested to be due to competition between bridging oxygen (BO) and NBO ions in the glass network as Er₂O₃ gradually compensated for Nb₂O₅. Further addition of Er₂O₃ (x > 2.0 mol%) seems to further reduce NBO leading to improved rigidity of the glass network causing a large increase of ultrasonic velocity (v_L and v_S) and related elastic moduli at x = 2.5 mol%. FTIR analysis on NbO₆ octahedral, TeO₄ trigonal bipyramid (tbp) and TeO₃ trigonal pyramid (tp) absorption peaks confirmed the initial formation of NBO ions at x = 0.5 mol% followed by NBO/BO competition at x = 0.5-2.0 mol%. Appearance of ZnO₄ tetrahedra and increase in intensity of TeO₄ tbp absorption peaks at x = 2.0 mol% and x = 2.5 mol% indicate increase in formation of BO.     

The dielectric behavior of a thermoelectric treated B2O3-Li2O-Nb2O5 glass

A transparent glass with the composition 60B₂O₃-30Li₂O-10Nb₂O₅ (mol%) was prepared by the melt-quenching technique. Glass-ceramics, containing LiNbO₃ ferroelectric crystallites, were obtained by heat-treatment (HT) above 500 °C, with and without the presence of an external electric field. The dielectric properties of the glass and glass-ceramic were investigated, as a function of temperature (270-315 K), in the 10 mHz-32 MHz frequency range. The presence of an external electric field, during the heating process, improves the formation of LiNbO₃ crystallites. The rise of the treatment temperature and the applied field, during the heat-treatment, leads to a decrease in the dc electric conductivity (σ_dc), indicating a decrease of the charge carriers number. The dielectric permittivity (ε′) values (300 K;1 kHz) are between 16.25 and 18.83, with the exception of the 550 °C HT sample that presents a ε′ value of 11.25. An electric equivalent circuit composed by an R in parallel with a CPE element was used to adjust the dielectric data. The results reflect the important role carried out by the heat-treatment and the electric field during the HT in the electric properties of glass-ceramics.     

Thermal, chemical, optical properties and structure of Er-doped and Er/Yb-codoped P2O5-Al2O3-ZnO glasses

This study was explored in series of the optical, thermal, and structure properties based on 60P₂O₅-10Al₂O₃-30ZnO (PAZ) glasses system that doped with varied rare-earth (RE) elements Yb₂O₃/Er₂O₃. The glass transition temperature, softening temperature and chemical durability were increased with RE-doping concentrations increasing, whereas thermal expansion coefficient was decreased. In the optical properties, the absorption and emission intensities also increase with RE-doping concentrations increasing, When Er₂O₃ and Yb₂O₃ concentrations are over than 3 mol% in the Er³⁺-doped PAZ system and Yb³⁺-doped concentration is over than 3 mol% for Er³⁺/Yb³⁺-codoped PAZ system, the emission intensity significantly decreases presumably due to concentration quenching, formation of the ions clustering, and OH⁻ groups in the glasses network. It is suggested that the maximum emission cross-section (σ_e) is 7.64 × 10^− 21 cm² at 1535 nm is observed for 3 mol% Er³⁺-doped PAZ glasses. Moreover, the maximum σ_e × full-width-at-half-maximum is 327.8 for 5 mol% Er³⁺-doped PAZ glasses.     

Thermodynamical miscibility in 0.8[xB2O3-(1 − x)P2O5]-0.2K2O glasses

The thermodynamical miscibility in 0.8[xB₂O₃-(1 − x)P₂O₅]-0.2K₂O glasses has been studied by measuring the glass transition temperature and the mixing enthalpy. Measurements have been performed by differential scanning calorimeter and hydrofluoric acid solution calorimetry at 298 K. The enthalpies of mixing are significantly negative over the whole range of composition. The results are discussed in terms of intermolecular associations.     

Thermo-optic properties of B2O3 doped Li2O-Al2O3-SiO2 glass-ceramics

Reduction in the temperature coefficient of the optical path length, dS/dT of Li₂O-Al₂O₃-SiO₂ glass-ceramics with near-zero thermal expansion coefficient was attempted using control of the temperature coefficient of electronic polarizability, ?, and the thermal expansion coefficient, α. The dS/dT value of 2.6 mol% B₂O₃-doped glass-ceramic was 12.5  × 10⁻⁶/°C, which was 0.9 ×  10⁻⁶/°C smaller than that of B₂O₃-free glass-ceramic. On the other hand, reduction in dS/dT through B₂O₃ doping was not confirmed in precursor glasses. Results showed that reduction in dS/dT of the glass-ceramic through B₂O₃ doping is caused by the reduction in ?. The reduction in ? from B₂O₃ doping was probably attributable to numerical reduction in non-bridging oxide ions with larger ? value by the concentration of boron ions in the residual glass phase. In addition, application of hydrostatic pressure during crystallization was effective to inhibit precipitation of β-spodumene solid solution, which thereby decreases dS/dT. The dS/dT value of B₂O₃-doped glass-ceramic crystallized under 196 MPa was 11.7 ×  10⁻⁶/°C. That value was slightly larger than that of silica glass. The α value of this glass-ceramic was smaller than that of silica glass.     

Temperature-assisted electrical poling of TeO2-Bi2O3-ZnO glasses for non-linear optical applications

The suitability for effective thermal poling of the ternary tellurite glasses with the compositions (100 − 2x)TeO₂-xBi₂O₃-xZnO (x = 5, 10 and 15, in molar percentage) for the second harmonic generation (SHG) was analyzed. The glass transitions and crystallization temperatures were studied via differential thermal analysis. The structural properties of the annealed glasses and furtherly heat-treated samples were probed by extended X-ray absorption fine structure (EXAFS) spectroscopy. Thermal poling of the glasses was undertaken conventionally at various temperatures close to the glass transition temperature under high vacuum and the second harmonic generated signals were compared. A new technique of two stage poling was tested for comparison. The non-linear second harmonic signal of the poled glasses was analyzed using the Maker-fringe technique and it was found that the two stage poling enhanced the non-linear efficiency when compared to the conventionally poled samples.     

Electron spin resonance and magnetic studies on CaO-SiO2-P2O5-Na2O-Fe2O3 glasses

Room temperature electron spin resonance (ESR) spectra and temperature dependent magnetic susceptibility measurements have been performed to investigate the effect of iron ions in 41CaO · (52 − x)SiO₂ · 4P₂O₅ · xFe₂O₃ · 3Na₂O (2 ? x ? 10 mol%) glasses. The ESR spectra of the glass exhibited the absorptions centered at g ≈ 2.1 and g ≈ 4.3. The variation of the intensity and linewidth of these absorption lines with composition has been interpreted in terms of variation in the concentration of the Fe²⁺ and Fe³⁺ in the glass and the interaction between the iron ions. The magnetic susceptibility data were used to obtain information on the relative concentration and interaction between the iron ions in the glass.     

The glass transition temperature and infrared absorption spectra of: (70−x)TeO2 + 15B2O3 + 15P2O5 + xLi2O glasses

Glasses of the system: (70−x) TeO₂ + 15B₂O₃ + 15P₂O₅ + xLi₂O, where x = 5, 10, 15, 20, 25 and 30 mol% were prepared by melt quench technique. Dependencies of their glass transition temperatures (T_g) and infrared (IR) absorption spectra on composition were investigated. It is found that the gradual replacement of oxides, TeO₂ by Li₂O, decreases the glass transition temperature and increases the fragility of the glasses. Also, IR spectra revealed broad weak and strong absorption bands in the investigated range of wave numbers from 4000 to 400 cm⁻¹. These bands were assigned to their corresponding bond modes of vibration with relation to the glass structure.     

Spectroscopic properties of Er-doped Na2O-Sb2O3-B2O3-SiO2 glasses

Spectroscopic properties of Er³⁺-doped Na₂O-Sb₂O₃-B₂O₃-SiO₂ glasses have been investigated for developing 1.5-μm broadband fiber amplifiers. An intense 1.5-μm near infrared emission with a broad full width at half maximum (FWHM) of 88 nm has been obtained for Er³⁺-doped 5Na₂O-20Sb₂O₃-35B₂O₃-40SiO₂ glass upon excitation with a 980 nm laser diode. The obtained emission cross-section of the ⁴I_13/2 → ⁴I_15/2 transition and the lifetime of the ⁴I_13/2 level of Er³⁺ ions are 6.8 × 10⁻²¹ cm² and 0.36 ms, respectively. It is noted that the product of the emission cross-section and the FWHM of the glass, σ_e × FWHM, is as great as 598.4 × 10⁻²¹ cm² nm, which is comparable or higher than that of Er³⁺-doped bismuth-based and tellurite-based glasses. These special optical properties encourage in identifying them as important materials for potential applications in high performance optics and optical communication networks.     

Studies of some mechanical and optical properties of: (70 − x)TeO2 + 15B2O3 + 15P2O5 + xLi2O glasses

Specimens of the glassy system: (70 − x)TeO₂ + 15B₂O₃ + 15P₂O₅ + xLi₂O, where x = 5, 10, 15, 20, 25 and 30 mol% were prepared by the melt-quenching. An ultrasonic pulse-echo technique was employed, at 5 MHz, for measuring: the ultrasonic attenuation, longitudinal and shear wave velocities, elastic moduli, Poisson ratio, Debye temperature and hardness of the present glasses. It is found that the gradual replacement of TeO₂ by Li₂O in the glass matrix up to 30 mol% leads to decrease the average crosslink density and rigidity of prepared samples which affects the properties, i.e., the hardness, ultrasonic wave velocities and elastic moduli are decreased, while the Poisson ratio and the ultrasonic attenuation are increased. Also, optical absorption spectra were recorded in the range, 200-800 nm for these glasses. The obtained results showed that a gradual shift in the fundamental absorption edge toward longer wavelengths occurred. Values of both of the optical energy gap, E_opt, and width tails, ΔE, are determined. It is observed that E_opt is decreased and ΔE increased with the increase of Li₂O in the glass matrix up to 30 mol%. The compositional dependences of the above properties are discussed and correlated to the structure of tested glasses.     

Effect of Bi2O3 proportion on physical, structural and electrical properties of zinc bismuth phosphate glasses

The variation in physical, structural and electrical properties has been studied as a function of Bi₂O₃ content in 20ZnF₂-(10 + x) Bi₂O₃-(70-x) P₂O₅, 0 ≤ x ≤ 10 mol% glasses, which were prepared by melt quenching technique and characterized by differential thermal analysis (DTA). Colorless samples, which have no absorption peaks, are obtained for 10 and 12 mol% of Bi₂O₃ and the glasses are slowly becoming brownish from 15 to 20 mol% of Bi₂O₃ which exhibit two absorption peaks at ~ 370 nm, ~ 450 nm correspond to Bi° transitions ⁴S_3/2 → ²P_3/2 and ⁴S_3/2 → ²P_1/2 respectively. The decrease in ³P₁ → ¹S₀ transition of Bi³⁺ photo luminescence emission for 18 and 20 mol% of Bi₂O₃ and increase in optical absorption area shows the reduction of Bi³⁺ to Bi°. From FTIR studies it is observed that an addition of Bi₂O₃ decreases the P―O―P covalent bond by forming P―O―Bi bonds due to high polarizing nature of Bi³⁺ ions. Dielectric parameters like ε', tan δ and a.c. conductivity σ_ac are found to increase and activation energy for a.c. conduction is found to decrease with the increase in the concentration of Bi₂O₃. Density of defect energy states is found to increase for higher concentration of Bi₂O₃ and is discussed according to quantum mechanical tunneling (QMT) model.