Thermally modulated differential scanning calorimetry of a glass of composition 45Na2O-40B2O3-10Al2O3-5In2O3

The kinetics of structural relaxation and of glass transition of the 45Na₂O-40B₂O₃-10Al₂O₃-5In₂O₃ glassforming melt is studied by means of standard DSC and of temperature modulated DSC. In this way the dependence of the fictive temperature on cooling rate is determined simultaneously with the determination of the dependence of the dynamic glass transition temperature on modulation frequency. Both sets of data are fitted together in terms of the equation of Ritland-Bartenev. It was found that the activation energy of the structural relaxation exhibits a moderate dependence on temperature with the dimensionless fragility parameter α=3.3 (for strong systems, α is about 1 and increases to about 8 for some very fragile polymeric systems).     

Thermodynamic modeling of the Al2O3–B2O3–SiO2 system

A complete literature review, critical evaluation, and thermodynamic modeling of the phase diagrams and thermodynamic properties of all oxide phases in the ternary Al₂O₃–B₂O₃–SiO₂ system at 1 bar pressure are presented. The molten oxide phase is described by the Modified Quasichemical Model and the Gibbs energy of the mullite solid solution is modeled using the Compound Energy Formalism. A set of optimized internally consistent thermodynamic functions for all the phases is presented. With the thermodynamic dataset, all available and reliable thermodynamic and phase equilibrium data can be reproduced within experimental error limits from 25 °C to above the liquidus temperatures. In addition, the reasonable predictions obtained for phase relations in the experimentally unexplored composition ranges suggest that the thermodynamic database can be used along with appropriate Gibbs energy minimization routines to calculate thermodynamic properties, phase equilibria, and phase diagrams of interest.     

Mössbauer and optical spectroscopic study of temperature and redox effects on iron local environments in a Fe-doped (0.5 mol% Fe2O3) 18Na2O-72SiO2 glass

Local environments of ferric and ferrous irons were systematically studied with Mössbauer (at liquid helium temperature) and ultraviolet-visible-near infrared spectroscopic methods for various 18Na₂O-72SiO₂ glasses doped with 0.5 mol% Fe₂O₃. These were prepared at temperatures of 1300-1600 °C in ambient air or at 1500 °C under reducing conditions with oxygen partial pressures from 12.3 to 0.27×10⁻⁷ atmospheres. The Mössbauer spectroscopic method identified three types of local environments, which were represented by the Fe³⁺ sextet, the Fe³⁺ doublet, and the Fe²⁺ doublet. The Fe³⁺ sextet ions were assigned to ‘isolated’ octahedral ions. Under reducing conditions, the octahedral Fe³⁺ ions were readily converted into octahedral ferrous ions. The Fe³⁺ doublet exists both in octahedral and tetrahedral environment, mainly as tetrahedral sites in the reduced samples. The tetrahedral ions were found stable against reduction to ferrous ions. The Fe²⁺ doublet sites existed in octahedral coordination. Combining results from both spectroscopic studies, the 1120- and 2020-nm optical bands were assigned to octahedral ferrous ions with a different degree of distortion rather than different coordinations. Further, we assigned the 375-nm band to the transition of octahedral ferric ions that are sensitive to the change of oxygen partial pressure in glass melting and 415-, 435-, and 485-nm bands to the transitions of the tetrahedral ferric ions that are insensitive to oxidation states of the melt. The effect of ferric and ferrous ions with different coordination environments on the glass immiscibility was elucidated.     

Magnetic properties of partially crystallized Na2OFe2O3SiO2 glass

The magnetic properties of partially crystallized glasses of the Na₂OFe₂O₃SiO₂ system which had undergone thermal treatments of different durations and intensities leading to phase separation, have been measured in order to investigate the influence of magnetic grain growth. Magnetic moments were evaluated at liquid helium temperature in fields up to 76 kOe. The magnetic susceptibilities of some of the samples have been measured between 4.2 and 300 K. They were shown to depend strongly on the dimensions of the grains, i.e. on the thermal treatment of each sample. The anomalous values observed are discussed in terms of the apparent presence of superantiferromagnetism superimposed on the contribution of paramagnetic Fe³⁺ ions dispersed in the amorphous matrix.     

Characterization of chemosynthetic Al2O3-2SiO2 geopolymers

Pure chemosynthetic Al₂O₃-2SiO₂ geoploymers displaying positive alkali-activated polymerization properties and high compressive strength at room temperature were effectively fabricated utilizing a sol-gel method. The molecular structure of the precursor powder and resulting geopolymers were investigated by X-ray diffraction (XRD) and nuclear magnetic resonance (NMR) analysis. In addition, the mechanical and alkali-activated polymerization properties of these materials were also studied. NMR data revealed that the chemosynthetic powders began to contain 5-coordinated Al atoms when the calcination temperatures exceeded 200 °C. These calcined powders were capable of reacting with sodium silicate solutions at calcination temperatures exceeding 300 °C, which is, however, much lower than the temperature required to convert kaolin to Metakaolin.     

The effect of composition on UV-vis-NIR spectra of iron doped glasses in the systems Na2O/MgO/SiO2 and Na2O/MgO/Al2O3/SiO2

Glasses with the compositions xNa₂O · 10MgO · (90 − x)SiO₂, 10Na₂O · xMgO · (90 − x)SiO₂, 5Na₂O · 15MgO · xAl₂O₃ · (80 − x)SiO₂, xNa₂O · 10MgO · 10Al₂O₃ · (80 − x)SiO₂, 10Na₂O · 10MgO · xAl₂O₃ · (80 − x)SiO₂, 10Na₂O · 5MgO · 10Al₂O₃ · (80 − x)SiO₂ were melted and studied using UV-vis-NIR spectroscopy in the wavenumber range from 5000 to 30 000 cm⁻¹. At [Al₂O₃] > [Na₂O], the UV-cut off is strongly shifted to smaller wavenumbers and the NIR peak at around 10 000 cm⁻¹ attributed to Fe²⁺ in sixfold coordination gets narrower. Furthermore, the intensity of the NIR peak at 5500 cm⁻¹ increases. This is explained by the incorporation of iron in the respective glass structures.     

Thermo-optic properties of B2O3 doped Li2O-Al2O3-SiO2 glass-ceramics

Reduction in the temperature coefficient of the optical path length, dS/dT of Li₂O-Al₂O₃-SiO₂ glass-ceramics with near-zero thermal expansion coefficient was attempted using control of the temperature coefficient of electronic polarizability, ?, and the thermal expansion coefficient, α. The dS/dT value of 2.6 mol% B₂O₃-doped glass-ceramic was 12.5  × 10⁻⁶/°C, which was 0.9 ×  10⁻⁶/°C smaller than that of B₂O₃-free glass-ceramic. On the other hand, reduction in dS/dT through B₂O₃ doping was not confirmed in precursor glasses. Results showed that reduction in dS/dT of the glass-ceramic through B₂O₃ doping is caused by the reduction in ?. The reduction in ? from B₂O₃ doping was probably attributable to numerical reduction in non-bridging oxide ions with larger ? value by the concentration of boron ions in the residual glass phase. In addition, application of hydrostatic pressure during crystallization was effective to inhibit precipitation of β-spodumene solid solution, which thereby decreases dS/dT. The dS/dT value of B₂O₃-doped glass-ceramic crystallized under 196 MPa was 11.7 ×  10⁻⁶/°C. That value was slightly larger than that of silica glass. The α value of this glass-ceramic was smaller than that of silica glass.     

Influence of Y2O3 on structural and optical properties of SiO2-BaO-ZnO-xB2O3-(10−x) Y2O3 glasses and glass ceramics

SiO₂-BaO-ZnO-xB₂O₃-(10−x) Y₂O₃, (0 ≤ x ≤ 10) glasses are synthesized. The effect of Y₂O₃ on the structural and optical properties of glasses has been investigated using different characterization techniques. The results are discussed in light of non-bridging oxygens (NBO), optical basicity and heat-treatment of glasses. The band gap has been calculated for as cast and heat-treated glasses. The band gap energy is found to decrease with the increasing content of Y₂O₃ in the glasses and heat-treatment. The presence of the crystalline phase in the glass matrix showed remarkable effect on band gap which decreases to semiconducting range.     

Structure and crystallization of potassium titanium phosphate glasses containing B2O3 and SiO2

Transparent glasses composition of which can be expressed by the formula: (100−x) · (K₂O · 2TiO₂ · P₂O₅) · x(K₂O · 2B₂O₃ · 7SiO₂), where x=5, 10, 15 and 20 mol% (KTP-xKBS), were obtained by melt quenching technique. The structure and crystallization behavior of these glasses have been examined by Fourier transform infrared spectroscopy, differential thermal analysis and X-ray diffraction. In spite of their nominal composition, the studied glasses exhibit a similar oxygen polyhedra distribution. However, significant differences were found in the trigonal BO₃ units amount. During DTA runs all the examined glasses devitrify in two steps. In the former, very small crystals of an unknown crystalline phase are produced. In KTP-5KBS and KTP-10KBS glasses anatase phase was also detected. Attempts were made in order to identify the unknown phase (UTP) for which a AB₃(XO₄)₂(OH)₆ Crandallite-type structure was proposed where the A, B and X sites were occupied by K, Ti and/or Al, and P, respectively. In the second devitrification step the crystallization of the KTiOPO₄ phase occurs while the UTP phase previously formed disappears. Isothermal heat treatments performed at temperature just above T_g have allowed one to obtain transparent crystal-glass nanocomposites, formed by crystalline nanostructure of the UTP phase uniformly dispersed in the amorphous matrix.     

Nano-crystallization in LaF3–Na2O–Al2O3–SiO2 glass

Aiming at tailoring optical properties, the precipitation of LaF₃ nano-crystals in LaF₃–Na₂O–Al₂O₃–SiO₂ glass-ceramics is studied thoroughly on the nano-scale using advanced transmission electron microscopic techniques. Nano-sized phase-separation droplets enriched in lanthanum and silicon are formed already in the base glass. Within these less than 20 nm large droplets, LaF₃ crystallizes upon heat treatment. The nano-crystallization mechanism revealed is self-limited since growth is restricted by the size of the droplets. An average crystallite size of around 12 nm is achieved with a narrow size distribution since the phase-separation droplets also contain silicon not incorporated into the growing crystal. Instead, excess silicon relocated to the periphery of the pre-existing phase-separation droplets forms a diffusion barrier around the LaF₃ nano-crystals preventing further crystal growth and/or ripening.     

Effects of Nb2O5 Replacement by Er2O3 on elastic and structural properties of 75TeO2-(10 − x)Nb2O5-15ZnO-(x)Er2O3 glass

Tellurite 75TeO₂-(10 − x)Nb₂O₅-15ZnO-(x)Er₂O₃; (x = 0.0-2.5 mol%) glass system with concurrent reduction of Nb₂O₅ and Er₂O₃ addition have been prepared by melt-quenching method. Elastic properties together with structural properties of the glasses were investigated by measuring both longitudinal and shear velocities using the pulse-echo-overlap technique at 5 MHz and Fourier Transform Infrared (FTIR) spectroscopy, respectively. Shear velocity, shear modulus, Young's modulus and Debye temperature were observed to initially decrease at x = 0.5 mol% but remained constant between x = 1.0 mol% to x = 2.0 mol%, before increasing back with Er₂O₃ addition at x = 2.5 mol%. The initial drop in shear velocity and related elastic moduli observed at x = 0.5 mol% were suggested to be due to weakening of glass network rigidity as a result of increase in non-bridging oxygen (NBO) ions as a consequence of Nb₂O₅ reduction. The near constant values of shear velocity, elastic moduli, Debye temperature, hardness and Poisson's ratio between x = 0.5 mol% to x = 2.0 mol% were suggested to be due to competition between bridging oxygen (BO) and NBO ions in the glass network as Er₂O₃ gradually compensated for Nb₂O₅. Further addition of Er₂O₃ (x > 2.0 mol%) seems to further reduce NBO leading to improved rigidity of the glass network causing a large increase of ultrasonic velocity (v_L and v_S) and related elastic moduli at x = 2.5 mol%. FTIR analysis on NbO₆ octahedral, TeO₄ trigonal bipyramid (tbp) and TeO₃ trigonal pyramid (tp) absorption peaks confirmed the initial formation of NBO ions at x = 0.5 mol% followed by NBO/BO competition at x = 0.5-2.0 mol%. Appearance of ZnO₄ tetrahedra and increase in intensity of TeO₄ tbp absorption peaks at x = 2.0 mol% and x = 2.5 mol% indicate increase in formation of BO.     

The dielectric behavior of a thermoelectric treated B2O3-Li2O-Nb2O5 glass

A transparent glass with the composition 60B₂O₃-30Li₂O-10Nb₂O₅ (mol%) was prepared by the melt-quenching technique. Glass-ceramics, containing LiNbO₃ ferroelectric crystallites, were obtained by heat-treatment (HT) above 500 °C, with and without the presence of an external electric field. The dielectric properties of the glass and glass-ceramic were investigated, as a function of temperature (270-315 K), in the 10 mHz-32 MHz frequency range. The presence of an external electric field, during the heating process, improves the formation of LiNbO₃ crystallites. The rise of the treatment temperature and the applied field, during the heat-treatment, leads to a decrease in the dc electric conductivity (σ_dc), indicating a decrease of the charge carriers number. The dielectric permittivity (ε′) values (300 K;1 kHz) are between 16.25 and 18.83, with the exception of the 550 °C HT sample that presents a ε′ value of 11.25. An electric equivalent circuit composed by an R in parallel with a CPE element was used to adjust the dielectric data. The results reflect the important role carried out by the heat-treatment and the electric field during the HT in the electric properties of glass-ceramics.     

Anomalous physical properties and Raman spectra of glassy B2O3BaTiO3Na2O materials

Anomalous physical properties (refractive index and density) of B₂O₃BaTiO₃Na₂O ternay glasses are determined and discussed on the basis of the structure present in the glasses and evidenced by vibrational Raman spectroscopy.These glasses behave in a manner analogous to the alkali B₂O₃X₂O binary glasses for molar ratio R = basic oxide/B₂O₃ up to 0.3, with oxygen binding by means of bridging bonds while boron coordination changes from the trigonal to tetrahedral type. The phenomenon is indicated by a progressive weakening of the 806 cm^?1 peak (attributable to a breathing vibration of the boroxol unit) and by a concomitant strengthening of the ～775 cm^?1 peak (attributable to a vibrational mode of boroxol units, or derived units, containing at least one 4-coordinate boron atom). For higher R values the Raman spectra bring to light the progressive demolition of the structural units responsible for the 775 cm^?1 Raman peak, which gives rise (the transformation is complete for R ～ 1) to two new main structural units, orthoborate [BTi₄O₁₀]^?1 (peak at 845 cm^?1) and metaborate BO₂^? (peak at 715 cm^?1).     

Structural investigations of copper doped B2O3-Bi2O3 glasses with high bismuth oxide content

Raman and infrared spectroscopy have been employed to investigate the 99.5%[xB₂O₃(1−x)Bi₂O₃]0.5%CuO glasses with different Bi/B nominal ratios (0.07?x?0.625) in order to obtain information about the competitive role of B₂O₃ and Bi₂O₃ in the formation of the glass network. The glass samples have been prepared by melting at 1100 °C and rapidly cooling at room temperature. In order to relax the structure, to improve the local order and to develop crystalline phases the glass samples were kept at 575 °C for 10 h. The influence of both Bi₂O₃ and CuO on the vitreous B₂O₃ network as well as the local order changes around bismuth and boron atoms in as prepared and heat treated samples was studied. Structural modifications occurring in heat treated samples compared to the untreated glasses have been observed.     

Electric conductivity of glasses in the system Na2O/CaO/SiO2/Fe2O3

The addition of polyvalent transition metal ions to the usually insulating traditional soda-lime-silica glasses can lead to semiconducting properties. We report on synthesis of glasses and glass-ceramics in a soda-lime-silicate based system containing Fe₂O₃ in the concentration range from 5 to 30 mol%. Two sub-systems were considered, in one of them the ratio [Na₂O]/[Fe₂O₃] was varied while in the other one, the ratio [SiO₂]/[Fe₂O₃] was changed. The phase composition of the synthesized products was characterized by X-ray diffraction and energy dispersive X-ray analysis, while the electrical properties were studied by impedance spectroscopy. Partially crystallized non-reduced samples are semiconducting even at room temperature while the glassy samples (both reduced and non-reduced) exhibit semiconducting properties at temperatures equal or larger than 100 °C. An attempt is done to predict the physical approximation explaining the conduction process in the glasses.     

Solubility of Ag2O into the Na2O–B2O3–Al2O3 system

The solubility of Ag₂O was measured for the Na₂O–B₂O₃ and Na₂O–B₂O₃–Al₂O₃ system with the rotating crucible method and static method, respectively, under air atmosphere at temperatures ranging from 1273 to 1423 K. The contamination of melts from crucibles could be avoided by the rotating crucible method, with which it became possible to measure the solubility of Ag₂O for the Na₂O–B₂O₃ system above the melting point of Ag for the first time. It was found that the addition of Na₂O decreases the solubility of Ag₂O while the addition of Al₂O₃ had little effect on the solubility. The effect of Na₂O and Al₂O₃ on the solubility of Ag₂O is expressed by interaction coefficients and is analyzed in terms of the basicity of melts. The solubility of Ag₂O in Na₂O–B₂O₃–Al₂O₃ melts increased with increased temperature. This phenomena was explained by a small enthalpy change in oxidation of silver.     

Raman scattering study of crystalline and melting states of BaO·2B2O3

Melting and crystallization scenarios of barium tetraborate BaB₄O₇ (BaO·2B₂O₃) are studied in situ by Raman spectroscopy. It is shown that the scenario depends on the temperature–time history of melt. Crystallization conditions of the beta modification of barium tetraborate (β-BaB₄O₇) from a stoichiometric glass structure BaO·2B₂O₃ were investigated.     

Electrical transport properties of 0.5Li2O-0.5M2O-2B2O3 (M = Li, Na and K) glasses

Transparent glasses in the system 0.5Li₂O-0.5M₂O-2B₂O₃ (M = Li, Na and K) were fabricated via the conventional melt quenching technique. The amorphous and glassy nature of the samples was confirmed via the X-ray powder diffraction and the differential scanning calorimetry, respectively. The frequency and temperature dependent characteristics of the dielectric relaxation and the electrical conductivity were investigated in the 100 Hz-10 MHz frequency range. The imaginary part of the electric modulus spectra was modeled using an approximate solution of Kohrausch-Williams-Watts relation. The stretching exponent, β, was found to be temperature independent for 0.5Li₂O-0.5Na₂O-2B₂O₃ (LNBO) glasses. The activation energy associated with DC conduction was found to be higher (1.25 eV) for 0.5Li₂O-0.5K₂O-2B₂O₃ (LKBO) glasses than that of the other glass systems under study. This is attributed to the mixed cation effect.     

Variation of optical basicity with probe ion,for Cs2O + B2O3 and Li2O + B2O3 glasses

Optical basicities (Γ) for Cs₂O + B₂O₃ and Li₂O + B₂O₃ glasses have been measured as a function of glass composition, using Tl⁺, Pb²⁺ and Bi³⁺ probe ions. The three probe ions register different values of Γ for glasses of given composition (and also for pure B₂O₃ glass and water). The divergence decreases as the alkali metal ion size decreases.For the Li₂O + B₂O₃ glasses, ideal (calculated) optical basicities agree within experimental precision with experimental values registered by Pb²⁺ (Γ_Pb²⁺) up to about 15 mol% Li₂O. For higher Li₂O contents, and for the Cs₂O + B₂O₃ glasses, ideal optical basicities agree less well with Γ_Pb²⁺, but show similar trends with composition to those shown by Γ_Pb²⁺.     

Effect of CaO on the surface morphology and strength of water soaked Na2O–B2O3–Al2O3–SiO2 vitrified bond

The surface morphology of Na₂O–B₂O₃–Al₂O₃–SiO₂ vitrified bond with and without calcium oxide was studied by soaking vitrified bonded microcrystalline alumina composites in water. The content of water introduced to the vitrified bond was determined by thermal gravity analysis, and the effects of water and calcium on the phase separation and nucleation of the vitrified bond were investigated using scanning electron microscope and energy-dispersive X-ray spectrometer. Soaked in water for 72 h, the Na₂O–B₂O₃–Al₂O₃–SiO₂ vitrified bond presented a porous surface, and its bending strength declined with increasing sintering temperature. However, the Na₂O–CaO–B₂O₃–Al₂O₃–SiO₂ vitrified bond was more durable against aqueous coolant even needle-shape crystals were found clustered on the surface of the vitrified bond. The crystals were enriched with aluminosilicate tested by energy-dispersive X-ray spectrums. The appearance of crystals lessened the dissolution of the vitrified bond and made the bending strength increase in the sintering temperature region between 870 °C and 930 °C.