Structural and optical properties in gadolinium-aluminum-lead-germanate quaternary glasses

Glasses in the quaternary system 0.05Al₂O₃·0.95[xGd₂O₃·(100-x)(7GeO₂·3PbO)] with 0 ≤ x ≤ 40 mol% have been prepared from melt quenching method. In this paper, we investigated structural and optical properties in gadolinium-alumino-lead-germanate glasses through investigations of FTIR (Fourier-Transform Infrared Spectroscopy) and UV-VIS (Ultra-Violet) spectroscopy.The observations presented in these mechanisms show that by increasing Gd₂O₃ content up to 40 mol%, the glass network modification has taken place mainly in the germanate part, while the excess of oxygen can be accommodated in the host network by the creation of shorter rings of [Ge₂O₇] structural units and the formation of [AlO₄] structural units. The affinity pronounced of the gadolinium cations towards germanate structural units produces the formation of the Gd₂Ge₂O₇ crystalline phase.The UV-VIS spectroscopy data show the charge transfer transitions of Pb^+ 2-O^− 2, Al^+ 3-O^− 2 and Gd^+ 3-O^− 2, respectively. The additional absorption in the range of 300 to 600 nm was attributed to other types of defects such as: non-bridging oxygen ions, change in valency of ions and other color centers.The values of the direct optical band gap of the glasses are determined from the optical absorption spectra. By increasing Gd₂O₃ content in the glass matrix, the optical band gap energy increases indicating changes of the lattice parameters by Gd₂O₃ incorporation.     

Vibrational, EPR and optical spectroscopy of the Cu doped glasses with (90-x)TeO2-10GeO2-xWO3 (7.5 ≤ x ≤ 30) composition

Infrared, EPR and optical absorption studies on (90-x)TeO₂-10GeO₂-xWO₃ (7.5 ≤ x ≤ 30) glasses containing Cu²⁺ spin probe have been carried out. The Infrared spectral studies show that the structure of glass network consists of [TeO₄], [TeO₃]/[TeO_3 + 1], [WO₄], [WO₆] and [GeO₆] units in the disordered manner. Physical parameters such as density (ρ), molar volume (V_m), oxygen packing density (OPD), oxygen molar volume (V_o), optical basicity (Λ), oxide ion polarizability (α_O²⁻), inter ionic distances and the concentration of ions per unit volume of Te, Ge, W, Cu and O have been determined. The spin-Hamiltonian parameters (g_||, g_⊥ and A_||) of Cu²⁺ ions in the present glasses have been estimated from EPR spectra at 300 K. Bonding parameters such as α², β₁², β², Γ_σ, and Γ_π have been calculated from both optical absorption and EPR data. The observed variations in spin-Hamiltonian parameters and bonding parameters have been correlated to the structural modifications due to the WO₃ incorporation into the TeO₂ glass network at constant 10 mol% GeO₂ content.     

Effects of Nb2O5 Replacement by Er2O3 on elastic and structural properties of 75TeO2-(10 − x)Nb2O5-15ZnO-(x)Er2O3 glass

Tellurite 75TeO₂-(10 − x)Nb₂O₅-15ZnO-(x)Er₂O₃; (x = 0.0-2.5 mol%) glass system with concurrent reduction of Nb₂O₅ and Er₂O₃ addition have been prepared by melt-quenching method. Elastic properties together with structural properties of the glasses were investigated by measuring both longitudinal and shear velocities using the pulse-echo-overlap technique at 5 MHz and Fourier Transform Infrared (FTIR) spectroscopy, respectively. Shear velocity, shear modulus, Young's modulus and Debye temperature were observed to initially decrease at x = 0.5 mol% but remained constant between x = 1.0 mol% to x = 2.0 mol%, before increasing back with Er₂O₃ addition at x = 2.5 mol%. The initial drop in shear velocity and related elastic moduli observed at x = 0.5 mol% were suggested to be due to weakening of glass network rigidity as a result of increase in non-bridging oxygen (NBO) ions as a consequence of Nb₂O₅ reduction. The near constant values of shear velocity, elastic moduli, Debye temperature, hardness and Poisson's ratio between x = 0.5 mol% to x = 2.0 mol% were suggested to be due to competition between bridging oxygen (BO) and NBO ions in the glass network as Er₂O₃ gradually compensated for Nb₂O₅. Further addition of Er₂O₃ (x > 2.0 mol%) seems to further reduce NBO leading to improved rigidity of the glass network causing a large increase of ultrasonic velocity (v_L and v_S) and related elastic moduli at x = 2.5 mol%. FTIR analysis on NbO₆ octahedral, TeO₄ trigonal bipyramid (tbp) and TeO₃ trigonal pyramid (tp) absorption peaks confirmed the initial formation of NBO ions at x = 0.5 mol% followed by NBO/BO competition at x = 0.5-2.0 mol%. Appearance of ZnO₄ tetrahedra and increase in intensity of TeO₄ tbp absorption peaks at x = 2.0 mol% and x = 2.5 mol% indicate increase in formation of BO.     

Spectroscopic properties and ab initio calculations on the structure of erbium–zinc-borate glasses and glass ceramics

Glasses in the (Er₂O₃)_x·(B₂O₃)_(60 ? x)·(ZnO)₄₀ system (0 ≤ x ≤ 15 mol%) have been prepared by the melt quenching technique. X-ray diffraction, FTIR spectroscopy, UV-VIS spectroscopy and ab initio calculations studies have been employed to study the role of Er₂O₃ content on the structure of the investigated glass system.X-ray diffraction and infrared spectra of the glasses reveal that the B–O–B bonds may be broken with the creation of new non-bridging oxygen ions facilitating the formation of Er–O–B linkages. The excess of oxygen can be accommodated in the network by the conversion of sp² planar [BO₃] units to the more stable sp³ [BO₄] tetrahedral structural units. The linkages of the [BO₄] structural units can polymerize in [B₃O₉]^? 9 cyclic trimeric ions which will produce the ErBO₃ crystalline phase. An increase of the efficiency corresponding to the ⁴I_15/2 state to ⁴I_11/2 state (4f–4f) transitions of Er^+ 3 ions was observed for the erbium oxide richest glasses.Ab initio calculations on the structure of the matrix network show the thermodynamic instability of the [BO₄], [ZnO₄] and [Zn₄O] structural units. Formation of three-coordination oxygens was necessary to compensate shortage of oxygens from zinc ions.     

EPR and magnetic susceptibility studies of B2O3–Bi2O3–Gd2O3 glasses

Glasses of the xGd₂O₃ · (100 − x)[B₂O₃ · Bi₂O₃] system with 0.5 ⩽ x ⩽ 10 mol% were studied by electron paramagnetic resonance (EPR) and magnetic susceptibility measurements. Data obtained show that for low gadolinium oxide contents of the samples (x ⩽ 3 mol%) the Gd³⁺ ions are randomly distributed in the host glass matrix and are present as isolated and dipole–dipole coupled species. For higher gadolinium oxide contents of the samples (x > 3 mol%) the Gd³⁺ ions appear as both isolated and antiferromagnetically coupled species. The EPR spectra of the glasses reveal resonance sites with an unexpected high crystalline field in addition to the ‘U’ spectrum, typical for Gd³⁺ ions in disordered systems. This absorption line is due to Gd³⁺ ions that replace Bi³⁺ ions from the host glass matrix and could play the network unconventional former role in the studied glasses.     

Structure and electrical conductivity of new Li2O-CeO2-B2O3 glasses

Fourier transformation infrared spectra, density and DC electrical conductivity of 30Li₂O · xCeO₂⋅(70 − x)B₂O₃ glasses, where x ranged between 0 and 15 mol%, have been investigated. The results suggested that CeO₂ plays the role of network modifier up to 7.5 mol%. At higher concentrations it plays a dual role; where most of ceria plays the role of network former. The density was observed to increase with increasing CeO₂ content. The effect on density of the oxides in the glasses investigated is in the succession: B₂O₃ < Li₂O < CeO₂. Most of CeO₂ content was found to be associated with B₂O₃ network to convert BO₃ into B O₄⁻ units. The contribution of Li⁺ ions in the conduction process is much more than that due to small polarons. The conductivity of the glasses is mostly controlled by the Li⁺ ions concentration rather than the activation energy for CeO₂ > 5 mol%. Lower than 5 mol% CeO₂ the conductivity is controlled by both factors. The dependence of W on BO₄⁻ content supports the idea of ionic conduction in these glasses.     

FTIR and ultrasonic investigations on modified bismuth borate glasses

Studies on xRO · 30Bi₂O₃ · (70−x)B₂O₃ glasses have been carried out (0 ? x ? 30 mol%, R = Zn, Ba). Elastic properties and Debye temperature have been investigated using sound velocity measurements at 4 MHz. The ultrasonic parameters along with the IR spectroscopic studies have been employed to explore the role of divalent cations in the structure of the studied glasses. Analysis of infrared spectra indicates that RO is preferentially incorporated into the borate network, forming BO₄ units. It is assumed that Bi₂O₃ enters the structure in the form of BiO₆ only. The change of density and molar volume with RO content reveals that BO₄ units linked to R²⁺ cations are denser than those linked to positive sites in the Bi₂O₃ network. Predicted values of four co-ordinated boron put forward questions about the reliability of assignment of structural units that Bi₂O₃ may form.     

The structure and optical properties of GeO2-GeS2 glasses

Oxy-chalcogenide glasses with compositions of xGeO₂-(100 − x)GeS₂, where 0 ? x ? 100 mol%, have been prepared and studied in terms of their structures and optical properties. X-ray fluorescence spectroscopy shows that Ge:S ratio can deviate from GeS₂ by ∼10 at.%, depending critically upon the preparation conditions. Raman scattering spectroscopy suggests that stoichiometric GeO₂-GeS₂ glasses have a heterogeneous structure in the scale of 1-100 nm. The optical gaps are nearly constant at 3.0-3.5 eV for glasses with 0 ? x ? 80 mol% and abruptly increase to ∼6 eV in GeO₂. This dependence suggests that the optical gap is governed by GeS₂ clusters, which are isolated and/or percolated. Composition-deviated glasses appear as orange and brown, and these glasses seem to have more inhomogeneous structures.     

Structural characteristic of Na2OP2O5GeO2 glass systems

Phosphate glasses based on xNa₂O0.5P₂O₅(0.5−x)GeO₂ (0.0 ⩽ x ⩽ 0.5) mol%, were prepared and their structures were characterized by magic angle spinning (MAS) nuclear magnetic resonance (NMR), Raman and IR spectroscopy techniques. It was found that the phosphate network of these glasses is composed of middle (Q²) and branching (Q³) phosphate tetrahedra, whereas germanium part in the network is composed of three- or four-membered GeO₄ tetrahedral rings. It was also found that the germanium tetrahedral are randomly connected to either Q² or Q³ phosphate units in the network. The glass network, especially the Q² units can be modified by the presence of Na ions. This modification is primarily associated with the phosphate. It is found that these glasses behave as if they are formed from a solution of GeO₂ and sodium–phosphate glass with various GeO₄ units and the Q² and Q³ phosphate units randomly distributed in the network.     

Elastic properties and structural studies on lead-boro-vanadate glasses

This paper describes elastic properties and spectroscopic studies on the xPbO-50B₂O₃-(50 - x)V₂O₅ (where x = 20, 25, 30, 35, 40, 45 and 49 mol%) glass system. Elastic moduli and spectroscopic parameters exhibit compositional dependent trends and the existence of characteristic borovanadate groups in these glasses. The bulk modulus and shear modulus increase with the concentration of [BO_4/2]⁻ and [B₂V₂O₉]²⁻ groups, which increases the dimensionality of the network. The scheme of modification of borate and vanadate groups has been explained by considering the Sanderson’s electronegativity principle. Analysis of infrared(IR) and magic angle spinning-nuclear magnetic resonance (MAS-NMR) spectra suggests the presence of characteristic diborovanadate groups also in these glasses. The results are examined in view of the structural groups formed due to the presence of PbO as a modifier.     

Bioactive glasses in the system CaO-B2O3-P2O5: Preparation, structural study and in vitro evaluation

Glasses in the system x B₂O₃(1 − x) [y CaO P₂O₅], (x = 0, 0.1, 0.2, 0.3, y = 2, 2.6, 3, 4, 5) have been prepared by fast quenching of high temperature melts. The presence of B₂O₃ affected the glass forming ability, allowing the preparation of calcium phosphate glasses with y ? 2.6. The structure of glasses was analyzed by μ-Raman and infrared spectroscopy. The analysis indicated that the glass network is dominated by highly charged species from phosphate tetrahedra with 3 (pyro) or 4 (ortho) NBOs, while the boron atoms are incorporated mainly in 3 coordinated sites in the form of B∅₃ or B∅₂O⁻ units. A small fraction of units was also evident from the spectra analysis of glasses with high CaO content. All calcium borophosphate glasses exhibited bioactivity after soaking in SBF solution within a few days. This was observed by μ-Raman and SEM microscopy, while XRD patterns clearly revealed growth of hydroxyapatite phase. The presence of boron in the glass network has a catalytic effect at favoring bioactivity of the otherwise bioinert calcium phosphate glasses.     

Three-dimensional structure of fast ion conducting 0.5Li2S + 0.5[(1 − x)GeS2 + xGeO2] glasses from high-energy X-ray diffraction and reverse Monte Carlo simulations

A high-energy X-ray diffraction study has been carried out on a series of 0.5Li₂S + 0.5[(1 − x)GeS₂ + xGeO₂] glasses with x = 0.0, 0.1, 0.2, 0.4, 0.6 and 0.8. Structure factors were measured to wave vectors as high as 30 Å⁻¹ resulting in atomic pair distribution functions with high real space resolution. The three dimensional atomic-scale structure of the glasses was modeled by reverse Monte Carlo simulations based on the diffraction data. Results from the simulations show that at the atomic-scale 0.5Li₂S + 0.5[(1 − x)GeS₂ + xGeO₂] glasses may be viewed as an assembly of independent chains of (Li^+-S)₂GeS_2/2 and (Li^+-O)₂GeO_2/2 tetrahedra as repeat units, where the Li ions occupy the open space between the chains. The new structure data may help understand the reasons for the sharp maximum in the Li⁺ ion conductivity at x ∼ 0.2.     

The effect of composition on the structure of sodium borophosphate glasses

Glasses in the system 40(P₂O₅)-x(B₂O₃)-(60 − x)(Na₂O) (10 ? x ? 30 mol%) have been prepared by the melt-quenching technique. Thermal properties were studied using differential thermal analysis and the relationship between composition and thermal stability was obtained. Structural characterization was achieved by a combination of experimental data (infrared and Raman spectroscopy, ¹¹B and ³¹P solid state NMR). In particular, variations in the phosphate network structure upon addition of B₂O₃ and Na₂O were investigated. Analysis of the data indicates that with increasing B₂O₃ content and decreasing Na₂O, the glass network shows increasing levels of cross-linking between phosphate and borate units. Evidence of direct B-O-P bonds was observed. In the compositional range investigated, borate groups contain boron almost exclusively in four-fold coordination.     

Ge and Ga K-edge EXAFS analyses on the structure of Ge-Ga-S-CsBr glasses

The local structure of Ge and Ga ions in (1 − x)(Ge_0.25Ga_0.10S_0.65)-xCsBr glasses (x = 0.00, 0.05, 0.10 and 0.12) were investigated using extended X-ray absorption fine structure (EXAFS) spectroscopy. CsBr formed [GaS_3/2Br]⁻ structural units in glass while Ge ions remained in GeS_4/2 tetrahedra, unaffected by CsBr addition. Rare-earth ions can be surrounded by Br ions only when CsBr/Ga ratio in glass became larger than unity.     

Structure of potassium germanophosphate glasses by X-ray and neutron diffraction: 2. Medium-range order

Characteristics of the medium-range order (MRO) of K₂O-GeO₂-P₂O₅ (KGP) glasses are obtained from X-ray and neutron scattering data. The behavior of the MRO is expressed in changes of pre-peaks and smooth contributions in the structure factors, S(Q), for Q < 12 nm^-1. Peaks at Q = (7.5 ± 0.5) nm^-1 (Q - magnitude of the scattering vector) are the outstanding features and reach maximum intensity for a glass of ∼25/50/25 mol% K₂O/GeO₂/P₂O₅. The pre-peaks are explained by a structural model in which K-rich and Ge-rich regions are separated by PO₄ units. The distance of repetition of similar regions (∼1 nm) is responsible for the pre-peak at ∼7.5 nm^-1. The intensity of this pre-peak is reduced and finally eliminated for glass compositions approaching the binary GeO₂-P₂O₅ system. The pre-peak is changed to a smooth scattering contribution and finally shifted to ∼9 nm^-1 for glass compositions approaching the binary K₂O-GeO₂ system. The strong tendency of the PO₄ units to coordinate K⁺ and Ge neighbors at their four corners is the source for the special MRO of the KGP glasses.     

Spectroscopic and magnetic behavior of xNd2O3(1−x)(3Bi2O3 · PbO) glasses

Glasses of the xNd₂O₃(1−x)(3Bi₂O₃ · PbO) system with 0?x?0.30 were obtained and studied by IR spectroscopy, X-ray photoelectron spectroscopy (XPS), density and magnetic susceptibility measurements. IR and density measurements show that the addition of neodymium ions produces structural changes and the neodymium ions play a network modifier role in the host glass matrix. XPS investigation permitted following the evolution of the structural disorder, of the degree of polymerization of bismuthate chains and of the fraction of bridging oxygens with respect to the neodymium ion concentration of the studied glasses. Magnetic susceptibility data show that the Nd³⁺ ions are present as isolated species for x?0.05 and as both isolated and exchange coupled species for higher x values.     

Effect of Bi2O3 proportion on physical, structural and electrical properties of zinc bismuth phosphate glasses

The variation in physical, structural and electrical properties has been studied as a function of Bi₂O₃ content in 20ZnF₂-(10 + x) Bi₂O₃-(70-x) P₂O₅, 0 ≤ x ≤ 10 mol% glasses, which were prepared by melt quenching technique and characterized by differential thermal analysis (DTA). Colorless samples, which have no absorption peaks, are obtained for 10 and 12 mol% of Bi₂O₃ and the glasses are slowly becoming brownish from 15 to 20 mol% of Bi₂O₃ which exhibit two absorption peaks at ~ 370 nm, ~ 450 nm correspond to Bi° transitions ⁴S_3/2 → ²P_3/2 and ⁴S_3/2 → ²P_1/2 respectively. The decrease in ³P₁ → ¹S₀ transition of Bi³⁺ photo luminescence emission for 18 and 20 mol% of Bi₂O₃ and increase in optical absorption area shows the reduction of Bi³⁺ to Bi°. From FTIR studies it is observed that an addition of Bi₂O₃ decreases the P―O―P covalent bond by forming P―O―Bi bonds due to high polarizing nature of Bi³⁺ ions. Dielectric parameters like ε', tan δ and a.c. conductivity σ_ac are found to increase and activation energy for a.c. conduction is found to decrease with the increase in the concentration of Bi₂O₃. Density of defect energy states is found to increase for higher concentration of Bi₂O₃ and is discussed according to quantum mechanical tunneling (QMT) model.     

Structure study of multi-component borosilicate glasses from high-Q neutron diffraction measurement and RMC modeling

A neutron diffraction structure study has been performed on multi-component borosilicate glasses with compositions (65 − x)SiO₂ · xB₂O₃ · 25Na₂O · 5BaO · 5ZrO₂, x = 5-15 mol%. The structure factor has been measured up to a rather high momentum transfer value of 30 Å⁻¹, which made high r-space resolution available for real space analyses. Reverse Monte Carlo simulation was applied to calculate the partial atomic pair correlation functions, nearest neighbor atomic distances and coordination number distributions. The Si-O network consists of tetrahedral SiO₄ units with characteristic first neighbor distances at r_Si-O = 1.60 Å and r_Si-Si = 3.0 Å. The boron environment contains two well-resolved B-O distances at 1.40 and 1.60 Å and both 3- and 4-fold coordinated B atoms are present. A chemically mixed network structure is proposed including ^[4]B-O-^[4]Si and ^[3]B-O-^[4]Si chain segments. The O-O and Na-O distributions suggest partial segregation of silicon and boron rich regions. The highly effective ability of Zr to stabilize glassy and hydrolytic properties of sodium-borosilicate materials is interpreted by the network-forming role of Zr ions.     

Effect of boron oxide addition on the Nd environment in a Nd-rich soda-lime aluminoborosilicate glass

The environment of Nd³⁺ ions has been studied using optical absorption spectroscopy and EXAFS at the Nd L₃-edge, in a series of soda lime aluminoborosilicate glasses with increasing B₂O₃ content. The proportion of BO₄ units has been determined by ¹¹B MAS NMR in an equivalent glass series with La³⁺ ions replacing the majority of Nd³⁺ ions, and complementary information has been obtained by measuring the Nd³⁺ decay fluorescence times in these latter glasses. In these glasses with low Al₂O₃ content, the R′ ratio, with R′ = [Na₂O^exc] / [B₂O₃] and [Na₂O^exc] = [Na₂O] − [Al₂O₃] − [ZrO₂], plays a key role in controlling the structural organization and crystallization resistance, in a similar way as the R ratio in the Dell and Bray model of sodium borosilicate glasses. At R′ > 0.5, the Nd³⁺ ions are located in a mixed silicate-borate environment and, by slow cooling of the melt, they tend to crystallize within a silicate apatite phase close to the Ca₂Nd₈(SiO₄)₆O₂ composition. At R′ < 0.5, the structural results are compatible with Nd³⁺ ions located in a borate-type environment (not excluding Si neighbors), and, by slow cooling of the melt, they segregate with Ca²⁺ ions within a Si-depleted separated borosilicate phase.     

Electron spin resonance and magnetic studies on CaO-SiO2-P2O5-Na2O-Fe2O3 glasses

Room temperature electron spin resonance (ESR) spectra and temperature dependent magnetic susceptibility measurements have been performed to investigate the effect of iron ions in 41CaO · (52 − x)SiO₂ · 4P₂O₅ · xFe₂O₃ · 3Na₂O (2 ? x ? 10 mol%) glasses. The ESR spectra of the glass exhibited the absorptions centered at g ≈ 2.1 and g ≈ 4.3. The variation of the intensity and linewidth of these absorption lines with composition has been interpreted in terms of variation in the concentration of the Fe²⁺ and Fe³⁺ in the glass and the interaction between the iron ions. The magnetic susceptibility data were used to obtain information on the relative concentration and interaction between the iron ions in the glass.