Optical band gap and refractive index dispersion parameters of In-Se-Te amorphous films

Different compositions of In_x(Se_0.75Te_0.25)_100 − x (where 0 ≤ x ≤ 10 at.%) chalcogenide glasses were prepared by the usual melt quench technique. Chalcogenide thin films of these glasses were prepared by using thermal evaporation method. The film transmittance (T(λ)) at normal incidence for these films was measured in the wavelength range 400-2500 nm using a double beam spectrophotometer. Successfully applying Swanepoel's method helps us to determine the film thickness and the real (n) and imaginary (k) parts of the complex index of refraction with high accuracy. Optical absorption measurements show that, the fundamental absorption is due to the allowed non-direct transitions. It was found that, the addition of In content leads to the increase of the refractive index increases while the optical band gap decreases. The obtained results are well discussed in terms of the chemical bond approach and the cohesive energy.     

Spectral properties of PbO-P2O5 glasses

The optical absorption spectra of xPbO-(100 − x) P₂O₅ glasses where x = 5, 10, 15, 20, 25, and 30 is reported. The spectral absorption of these glasses was measured in the spectral range 300-900 nm at room temperature. Optical absorption spectra show that the absorption edge has a tail extending towards lower energies. The edge shifts nearly linearly towards higher energies with increasing PbO content. The degree of the edge shift was found to depend on the PbO content and is mostly related to the structural rearrangement and the relative concentrations of the glass basic units. The optical energy gap increases, from 2.55 to 3.05 eV by increasing PbO content from 5 to 30 mol%. The width of the localized states is decreased by increasing PbO content.     

Structure and properties of glasses in ZnO-P2O5-TeO2 system

Glasses in the ternary ZnO-P₂O₅-TeO₂ system were prepared and studied in two compositional series (100 − x)[0.5ZnO-0.5P₂O₅]-xTeO₂ (X-series) and 50ZnO-(50 − y)P₂O₅-yTeO₂ (Y-series) within the concentration range of x = 0-60 and y = 0-40 mol% TeO₂. Their structure was studied by Raman and ³¹P MAS NMR spectroscopies. The incorporation of TeO_x units into the structural network is associated with the depolymerisation of phosphate chain structure as revealed by both methods. At a high TeO₂ content isolated PO₄ tetrahedra are formed in the structure of glass series Y, while diphosphate O₃P-O-PO₃ groups are present in the structure of the glass series X. In the structure of glass series Y tellurium atoms form predominantly TeO₃ trigonal pyramids, whereas in the X glass series TeO₄ trigonal bipyramids prevail in the glass structure. The addition of TeO₂ to the parent zinc metaphosphate glass results in a decrease of glass transition temperature in both compositional series associated with the replacement of stronger P―O bonds by weaker Te―O bonds.     

Optical characterization of As2Se3-Ag4SSe-SnTe amorphous thin films

Amorphous thin films from the system As₂Se₃-Ag₄SSe-SnTe were prepared by thermal vacuum evaporation from the corresponding bulk glassy samples. The film structure and surface morphology were investigated by scanning electron microscopy and atomic force microscopy; the results revealed uniform, smooth and homogeneous coatings. The amorphous chalcogenide films are transparent in a wide spectral range as shown by transmission and reflection measurements in the VIS and NIR regions. The optical band gap was determined and its compositional dependence is discussed in terms of structural considerations and the formation of charged defect centers.     

Structural and optical properties of thin films prepared from surface modified ZrO2

This paper describes the preparation and characterization of ZrO₂ thin films deposited on silicon wafer by spin coating method. Nanocrystalline ZrO₂ was synthesized by hydrothermal method using zirconium (IV)-n-propoxide as a precursor material. Surface of the ZrO₂ particles was then modified with 2-acetoacetoxyethyl methacrylate used as a copolymer for coatings. The optical properties, nanostructure and surface morphology of the thin films prepared from surface modified ZrO₂ nanoparticles were examined by optical spectroscopy, X-ray diffraction and scanning electron microscopy, respectively. It was found that the films deposited on silicon wafer have crystalline structure of monoclinic (111) at temperature of 150 °C. It was observed that films depict very dense material that does not present any granular or columnar structure. It was found that optical transparency of thin ZrO₂ films distributed in the range of 30-40 percent in the spectral range 400-800 nm. Refractive index of ZrO₂ films were determined as functions of ZrO₂ content and it was found that the refractive index increases from 1.547 to 1.643 with increased ZrO₂ content.     

The structure of liquid As2Se3 and GeSe2 by neutron diffraction

The liquid structures of As₂Se₃ and GeSe₂ have been investigated using the neutron diffraction patterns. In both cases the structure factor showed a low first peak maximum which follows a weak but apparent pre-peak at very low momentum transfer. It was also observed that the radial distribution function of both materials are characterized by the well-defined first neighbor shell because of the deep minimum on its right-hand side although in the liquid state. These results indicate that strong covalent bondings between unlike atoms in the solid state still remain when melting. Both the structure factor and the distribution curves of these alloys are, on the whole, similar to those in the amorphous phase which have already been examined. A slight difference in the coordination number, however, is found between amorphous and liquid phases of these materials.     

Glass preparation and temperature-induced crystallization in multicomponent B2O3-PbX2-PbO-Al2O3-WO3-Dy2O3 (X = F, Cl, Br) system

Multicomponent lead borate glasses modified by PbX₂ (X = F, Cl or Br) were examined. For the first time, lead tungstate PbWO₄ crystallites dispersed into glass matrices were successfully obtained from controlled crystallization. Excitation by 310 nm line leads to broad blue luminescence related to the radiative transition which occurred in the PbWO₄ crystallites. It was found that halogen X ions (X = F, Cl or Br) were also incorporated in the distorted crystal system of PbWO₄. It was proved by results obtained from X-ray diffraction as well as luminescence measurements.     

Role of nickel ion coordination on spectroscopic and dielectric properties of ZnF2-As2O3-TeO2:NiO glass system

20ZnF₂-30As₂O₃-(50 − x)TeO₂:xNiO (0 ≤ x ≤ 2.0) glasses were synthesized. The glasses were characterized by X-ray diffraction, scanning electron microscopy, EDS and DSC techniques. A variety of properties, i.e. optical absorption, infrared, magnetic susceptibilities and dielectric properties (constant ?′, loss tan δ, a.c. conductivity σ_ac over a wide range of frequency and temperature) of these glasses have been carried out. The analysis of results of all these studies has indicated that the nickel ions occupy both octahedral and tetrahedral positions and the gradual increase of NiO content in the glass matrix causes growing proportions of Ni²⁺ ions that occupy octahedral positions. The luminescence spectra of these glasses have exhibited a broad emission band in region 1200-1450 nm identified due to ³T₂(3F) → ³A₂(3F) octahedral transition of Ni²⁺ ions. The luminescence efficiency and cross section have been found to be the highest for the glass containing highest concentration of NiO. Finally it is concluded that the higher the concentration of octahedrally positioned Ni²⁺ ions, the higher is the luminescence efficiency.     

Structural, electrical, and optical properties of As2S3-Cu6PS5I nanocomposites

As₂S₃-Cu₆PS₅I nanocomposites are prepared by incorporation of nanocrystals of Cu₆PS₅I superionic conductor in As₂S₃ glass matrix. Their structural studies by scanning electronic microscopy are performed and the electrical conductivity of the nanocomposites is investigated. The temperature dependence of the nanocomposite optical absorption edge is studied; a non-Urbach behaviour of the absorption edge is revealed. Influence of different types of disordering on the optical absorption edge is studied.     

Optical properties of thin films of system (As2Se3)80−x(As2Te3)x(SnTe)20 prepared by PLD

Thin amorphous films from system (As₂Se₃)_80−x(As₂Te₃)_x(SnTe)₂₀ were prepared by pulsed laser deposition (PLD) from their bulk glasses and their optical properties were studied by spectral ellipsometry. Spectral dependencies of refractive index, absorption and extinction coefficient and optical gap (1.41–1.66 eV for (As₂Se₃)_80−x(As₂Te₃)_x(SnTe)₂₀ with x = 20 resp. x = 0) were calculated from optical tansmittance, from ellipsometric data by Tauc method. High values of refractive index n₀ (2.49–2.60) and of non-linear χ⁽³⁾ coefficient of index of refraction (4.9–7.5 × 10⁻¹² esu for the glass (As₂Se₃)_80−x(As₂Te₃)_x(SnTe)₂₀ with x = 0 resp. x = 20) made studied thin films of system (As₂Se₃)_80−x(As₂Te₃)_x(SnTe)₂₀ promising candidates for application in optics and optoelectronics.     

Laser wavelength effect on structural and optical properties of Cd34Se66 nanocrystalline thin film

Cadmium Selenide (Cd₃₄Se₆₆) thin films are deposited on a glass substrate using the thermal evaporation method at room temperature. The Cd₃₄Se₆₆ films are characterized using XRD. The crystallite size of the film is calculated from XRD data, which is found as 29.61 nm as-deposited. It is also found that crystallite size of Cd₃₄Se₆₆ changed after irradiation with N₂ and Nd:YAG laser. The changes in the optical properties of the films after irradiation with N₂ laser and Nd:YAG laser are also studied in the wavelength range of 300-700 nm and it is found that the optical band gap of the Cd₃₄Se₆₆ films changed after laser irradiation.     

Structure related properties of obliquely deposited amorphous a-As2S3 thin films

The surface roughness and morphology growth of a-As₂S₃ films vacuum deposited within a large scale of vapor incidence angles are studied. The formation of a columnar structure at normal and oblique deposition is demonstrated. The relationship between the micromorphology of the films and their optical and mechanical properties is revealed for as grown and annealed samples.     

Characterization of As-Se-Tl films near infrared region

?Amorphous chalcogenide of As-Se-Tl glassy alloys was prepared by melt quenching technique. Films were deposited on a transparent glass substrate using thermal evaporation technique. The optical characterization of thin As-Se-Tl films was studied by the analysis of transmission spectra, measured at normal incidence, in the spectral range 200-3000. The envelope method, proposed by Swanepoel, is a commonly used method for studying optical properties of films with uniform and non uniform thickness. Thickness values as well as optical constants, refractive index, Dispersion energy, Urbach and static refractive index or infinite wave length dielectric constant, are calculated using Wemple-DiDomenico model near infrared region using the envelopes of the transmittance spectrum of the films. The values of optical constants: absorption coefficient, Urbach tail, refractive index etc. have been determined. Urbach tail is estimated using Tauc's extrapolation and is found to increase from 0.69 to 0.91 eV with the Tl addition. This behavior of Urbach tail is interpreted in terms of Tauc's Model. Other optical constants are interpreted in terms of Wemple-DiDomenico model, chemical bond approach, electro-negativity difference of the atoms involved and cohesive energy of the system.     

Effect of Bi2O3 proportion on physical, structural and electrical properties of zinc bismuth phosphate glasses

The variation in physical, structural and electrical properties has been studied as a function of Bi₂O₃ content in 20ZnF₂-(10 + x) Bi₂O₃-(70-x) P₂O₅, 0 ≤ x ≤ 10 mol% glasses, which were prepared by melt quenching technique and characterized by differential thermal analysis (DTA). Colorless samples, which have no absorption peaks, are obtained for 10 and 12 mol% of Bi₂O₃ and the glasses are slowly becoming brownish from 15 to 20 mol% of Bi₂O₃ which exhibit two absorption peaks at ~ 370 nm, ~ 450 nm correspond to Bi° transitions ⁴S_3/2 → ²P_3/2 and ⁴S_3/2 → ²P_1/2 respectively. The decrease in ³P₁ → ¹S₀ transition of Bi³⁺ photo luminescence emission for 18 and 20 mol% of Bi₂O₃ and increase in optical absorption area shows the reduction of Bi³⁺ to Bi°. From FTIR studies it is observed that an addition of Bi₂O₃ decreases the P―O―P covalent bond by forming P―O―Bi bonds due to high polarizing nature of Bi³⁺ ions. Dielectric parameters like ε', tan δ and a.c. conductivity σ_ac are found to increase and activation energy for a.c. conduction is found to decrease with the increase in the concentration of Bi₂O₃. Density of defect energy states is found to increase for higher concentration of Bi₂O₃ and is discussed according to quantum mechanical tunneling (QMT) model.     

Optical properties of selenite glasses

The aim of this work is to obtain multicomponent selenite glasses containing other non-traditional glass formers such as V₂O₅, TeO₂ and MoO₃ and to verify their optical properties in the visible spectral region. Glasses containing MoO₃ and TeO₂ are transparent in the visible range and near IR region from 400 to 2300 nm. Transparent coloured glasses were obtained due to the electron transfer charge processes. Using IR spectroscopy it was determined the main building units of the amorphous network. It was found the presence of TeO₄, SeO₃ and MoO₄ units.     

Durability of an As2S3 chalcogenide glass: Optical properties and dissolution kinetics

The durability of a As₂S₃ chalcogenide glass composition was studied in de-ionized water at different temperatures (60-90 °C) for different periods of time, up to 120 days. The evolutions of the chemical composition and the pH of the solutions as well as the optical transmission of bulk samples, in the 2-10 μm region, were measured as a function of corrosion time. Atomic force microscopy and optical microscopy were used to investigate the roughness of corroded surfaces and the evolution of surface defects. The water corrosion of As₂S₃ glass was found to follow a congruent dissolution mechanism, a possible glass-water reaction mechanism was proposed. The optical transmission of the glass was found to be affected by the corrosion. The optical loss increased from 4 to 21% with corrosion time, this variation was attributed to the texturation of the surface by the reaction of corrosion. Moreover, the experimental results show that high temperature value enhances the corrosion reaction: an activation energy of 103 ± 2 kJ/mol was computed from experimental measurements.     

Study of the structural insertion of Al in the Al2O3-SiO2 and Nd2O3-Al2O3-SiO2 glass systems

Glasses in the Al₂O₃-SiO₂ and Nd₂O₃-Al₂O₃-SiO₂ systems were prepared by the sol-gel method. The gel-glass evolution was studied using near-infrared (NIR) and ultraviolet-visible (UV-VIS) spectrophotometry, X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier infrared spectroscopy (FTIR) and nuclear magnetic resonance spectroscopy (NMR). The results obtained indicate a relationship between the sample compositions, the treatment temperature and the Al coordination. In the samples of the Nd₂O₃-Al₂O₃-SiO₂ system the densification of the structure, when the treatment temperature increases, leads to the segregation of neodymium oxide particles.     

Glass formation, physico-chemical properties, and structure of glasses based on Ga2S3-GeS2-Sb2S3 system

We prepared sulfide glasses based on a Ga₂S₃-GeS₂-Sb₂S₃ system and investigated the compositional dependences of their physico-chemical properties and structure. Additivities were observed for density and refractive index; i.e., these properties were presented by the summation of the contribution from each component. With the increase of Sb₂S₃ content, the density, refractive index, and thermal expansion coefficient increased while the glass transition and softening temperatures decreased, and the short-wavelength absorption edge shifted to the longer wavelength side. These variations are expected from the incorporation of a heavy element (Sb) into the glasses. On the other hand, the replacement of GeS₂ by Ga₂S₃ increased the density and refractive index, and shifted the short-wavelength absorption edge to the longer wavelength side. These variations were explained by the increase of the number densities of the cations with the replacement and the formation of metal-metal bonds. The latter was confirmed from the Raman spectra. We also investigated the effects of Ag₂S incorporation on the optical properties. The incorporation of Ag₂S increased the density and refractive index whereas the position of the short-wavelength absorption edge varied little. These results show the possibility of fabricating an optical waveguide by Ag incorporation into the glasses.     

Considerations on the structure and physical properties of B2O3-SiO2 and GeO2-SiO2 glasses

Data of density, refractive index and thermal expansion coefficient for B₂O₃-SiO₂ and GeO_2-SiO₂ glasses have been analyzed. The volumes of the structural units are the same found for the vitreous B₂O₃, GeO₂ and SiO₂. The volume of any structural unit is constant over the entire composition region of the glass system. The same has been found for the differential refraction and unit refraction of the structural units in these glasses. Different features are observed for the differential expansion of the structural units. There is a considerable change with composition in the differential expansion of BO₃, GeO₄ and SiO₄ units. The effect is attributed to a change in the asymmetry of vibrations with the number of Si-O-B or Si-O-Ge linkages in the matrix. The thermal expansion coefficient is mainly determined by the contribution of B₂O₃ or GeO₂ in the concerned glasses.     

Optical Properties of Bi2O3-TeO2-B2O3 Glasses

Glasses of the Bi₂O₃-TeO₂-B₂O₃ ternary system were developed and their linear and nonlinear optical properties were investigated. The absorption edges of these glasses were found to be 367-384 nm with a good transmittance in visible wavelength, although they exhibit the refractive indices as high as 1.98-2.12 at 633 nm. The absorption edges are quite steep and they are analyzed by the Urbach theory. The obtained Urbach energies of these glasses are 73-79 meV which are comparable to silica glasses. The high refractive index and its glass composition dependency are discussed according to the basics of the electronic polarizability and optical basicity. The high third order nonlinear susceptibility χ⁽³⁾ = 2.0 × 10^− 12 esu at 800 nm was also obtained in the 36Bi₂O₃-18TeO₂-46B₂O₃ glass.