Non-isothermal crystallization kinetics of La2CaB10O19 from glass

The non-isothermal crystallization kinetics of La₂CaB₁₀O₁₉ (LCB) from a La₂O₃-CaO-B₂O₃ glass was studied. Differential thermal analysis methods were performed on three glass powders to obtain the kinetic parameters of LCB crystallization mechanism. The activation energies for overall crystallization (E), obtained by the methods of Kissinger and Ozawa, were in the range of 479-569 kJ/mol. Multiple (five) analysis methods were used to estimate the Avrami exponent (n), which could consequently be reduced into the single value of n = 3.1 ± 0.3. The growth morphology index (m) of LCB was corroborated by microscopy (optical and electron) images, which revealed a three dimensional growth. Energy dispersive spectroscopy confirmed that LCB is the crystallizing phase from the glass by an interface controlled mechanism. The parameters of the Johnson-Mehl-Avrami kinetic model for the analysis of LCB crystallization from glass were found to be n = m = 3.     

Effects of Nb2O5 Replacement by Er2O3 on elastic and structural properties of 75TeO2-(10 − x)Nb2O5-15ZnO-(x)Er2O3 glass

Tellurite 75TeO₂-(10 − x)Nb₂O₅-15ZnO-(x)Er₂O₃; (x = 0.0-2.5 mol%) glass system with concurrent reduction of Nb₂O₅ and Er₂O₃ addition have been prepared by melt-quenching method. Elastic properties together with structural properties of the glasses were investigated by measuring both longitudinal and shear velocities using the pulse-echo-overlap technique at 5 MHz and Fourier Transform Infrared (FTIR) spectroscopy, respectively. Shear velocity, shear modulus, Young's modulus and Debye temperature were observed to initially decrease at x = 0.5 mol% but remained constant between x = 1.0 mol% to x = 2.0 mol%, before increasing back with Er₂O₃ addition at x = 2.5 mol%. The initial drop in shear velocity and related elastic moduli observed at x = 0.5 mol% were suggested to be due to weakening of glass network rigidity as a result of increase in non-bridging oxygen (NBO) ions as a consequence of Nb₂O₅ reduction. The near constant values of shear velocity, elastic moduli, Debye temperature, hardness and Poisson's ratio between x = 0.5 mol% to x = 2.0 mol% were suggested to be due to competition between bridging oxygen (BO) and NBO ions in the glass network as Er₂O₃ gradually compensated for Nb₂O₅. Further addition of Er₂O₃ (x > 2.0 mol%) seems to further reduce NBO leading to improved rigidity of the glass network causing a large increase of ultrasonic velocity (v_L and v_S) and related elastic moduli at x = 2.5 mol%. FTIR analysis on NbO₆ octahedral, TeO₄ trigonal bipyramid (tbp) and TeO₃ trigonal pyramid (tp) absorption peaks confirmed the initial formation of NBO ions at x = 0.5 mol% followed by NBO/BO competition at x = 0.5-2.0 mol%. Appearance of ZnO₄ tetrahedra and increase in intensity of TeO₄ tbp absorption peaks at x = 2.0 mol% and x = 2.5 mol% indicate increase in formation of BO.     

Theoretical studies of the spin Hamiltonian parameters and the local structures for the tetragonal Cu centers in the LKB glasses

The spin Hamiltonian parameters (g factors g_∥, g_⊥ and the hyperfine structure constants A_∥, A_⊥) for the Cu²⁺ centers in the lithium potassium borate (LKB) glasses xLi₂O·(30 − x)·K₂O·70B₂O₃ (0 ≤ x ≤ 25) were theoretically studied using the high-order perturbation formulas of these parameters for a 3d⁹ ion in a tetragonally elongated octahedron. The [CuO₆]¹⁰⁻ clusters in the LKB glasses are found to suffer the relative elongations of about 3% along the tetragonal axis due to the Jahn-Teller effect. The concentration dependences of the g factors are illustrated by the approximately linear decrease of the cubic field parameter Dq as well as the increases of the covalency factor N and the relative elongation ratio ρ due to the slight expansion of the cell volume or bond lengths with increasing the Li₂O concentration x. Meanwhile, the slow non-linear increases of the hyperfine structure constants are described as the rough exponential increase of the core polarization constant κ with x due to the increase of the tetragonality of the systems. The theoretical spin Hamiltonian parameters and their concentration dependences show good agreement with the experimental data. To evaluate validity and applicability of the present theoretical model and formulas, the EPR results of the Cu²⁺ centers in similar lithium sodium borate (LNB) xLi₂O·(30 − x)·Na₂O·70B₂O₃ (5 ≤ x ≤ 25 mol%) glasses are also analyzed and compared with those in the LKB systems using the uniform model and formulas.     

An investigation of the kinetic transformation mechanism of Ge12.5Te87.5 chalcogenide glass under non-isothermal regime

Differential scanning calorimetry (DSC) technique was used to study the kinetics of amorphous to crystalline transformation in Ge_12.5Te_87.5 chalcogenide glass. The kinetic parameters of glassy Ge_12.5Te_87.5 under non-isothermal conditions are analyzed by the model-free and model-fitting approaches from a series of experiments at different constant heating rates (5-50 K/min). The effective activation energy of crystallization was determined by analyzing the data using the isoconversional methods of Kissinger-Akahira-Sunose (KAS), Tang, Starink, Flynn-Wall-Ozawa (FWO) and Vyazovkin. The analysis of the present data shows that the effective activation energy of crystallization is constant throughout the entire interval of conversions and hence with temperature. The transformation mechanism examined using the local Avrami exponents indicates that one mechanism (three-dimensional growth) is responsible for the transformation process for all heating rates used. The reaction model that may describe the transformation process of the Ge_12.5Te_87.5 chalcogenide glass is the Avrami-Erofeev model (g(α) = [− ln(1 − α)]^1/n) with n = 3 for all heating range at the whole range of crystallized fraction (α = 0.05-0.95). A good agreement between the experimental and the reconstructed (α-T) curves has been achieved. The transformation from amorphous to crystalline phase in Ge_12.5Te_87.5 chalcogenide glass demonstrates a single-step mechanism.     

Growth of polar axis oriented tetragonal Pb(Zr,Ti)O3 films on CaF2 substrates with transparent (La0.07Sr0.93)SnO3

Epitaxial (La_0.07Sr_0.93)SnO₃ [LSSO] films were deposited on CaF₂ substrates by pulse laser deposition. The (1 0 0)_c orientation of LSSO films was observed only on (1 1 0)CaF₂, whereas (1 1 0)_c orientation was found on (1 1 1)CaF₂ and (1 0 0)CaF₂. (0 0 1) polar axis oriented tetragonal Pb(Zr_0.35Ti_0.65)O₃ films were grown on the fabricated (1 0 0)_cLSSO∥(1 1 0)CaF₂ by pulsed metal organic chemical vapor deposition. The (0 0 1)Pb(Zr_0.35Ti_0.65)O₃∥(1 0 0)cLSSO∥(1 1 0)CaF₂ stack structure exhibited about 70% transparency with an adsorption edge of approximately 330 nm.     

Crystallisation of a simulated borosilicate high-level waste glass produced on a full-scale vitrification line

A simulated (inactive) borosilicate high-level waste (HLW) glass was produced on a full-scale vitrification line with composition simulating vitrified oxide fuel (UO₂) reprocessing waste. As-cast samples were compositionally homogeneous (Type I microstructure) and/or compositionally inhomogeneous displaying compositional ‘banding’ and frequently containing ‘reprecipitated calcine’ (Type II microstructure). Crystal phases identified in as-cast samples were: tetragonal RuO₂, cubic Pd-Te alloy, cubic (Cr,Fe,Ni,Ru)₃O₄, trigonal Na₃Li(MoO₄)₂·6H₂O, ostensibly cubic Zr_{1 − x − y}Ce_xGd_yO_2 − 0.5y and a lanthanoid (Nd,Gd,La,Ce) silicate. Zr_{1 − x − y}Ce_xGd_yO_2 − 0.5y and lanthanoid (Nd,Gd,La,Ce) silicate were found exclusively in the Type II microstructure as component crystal phases of ‘reprecipitated calcine’. Heat treated samples (simulating the retarded cooling experienced by actual (active) borosilicate HLW glasses after pouring) displayed extensive crystallisation and cracking (Type A microstructure) and/or ‘banded’ crystallisation (Type B microstructure) depending on their parent (as-cast) microstructure (Type I and/or Type II respectively). Crystal phases identified in heat treated samples were: tetragonal SiO₂ (α-cristobalite), tetragonal (Na,Sr,Nd,La)MoO₄, cubic Ce_{1 − x − y}Zr_xGd_yO_2 − 0.5y, a Ni-rich phase, a lanthanoid (Nd,Gd,La,Ce) silicate and orthorhombic LiNaZrSi₆O₁₅ (zektzerite). α-cristobalite was found exclusively in the Type A microstructure, while lanthanoid (Nd,Gd,La,Ce) silicate and zektzerite were only found in the Type B microstructure. Potential host phases for HLW radionuclides are: Pd-Te alloy (¹⁰⁷Pd and ⁷⁹Se), (Cr,Fe,Ni,Ru)₃O₄ (⁶³Ni), Zr_{1 − x − y}Ce_xGd_yO_2 − 0.5y (⁹³Zr, Pu and U), both lanthanoid (Nd,Gd,La,Ce) silicates (Am and Cm), (Na,Sr,Nd,La)MoO₄ (⁹⁰Sr, Am and Cm), Ce_{1 − x − y}Zr_xGd_yO_2 − 0.5y (⁹³Zr, Pu and U), the Ni-rich phase (⁶³Ni) and zektzerite (⁹³Zr, ¹²⁶Sn and U). Cracking in samples was attributed to thermal expansion mismatch between the borosilicate HLW glass matrix and RuO₂, cristobalite (both α and β), (Na,Sr,Nd,La)MoO₄ and zektzerite on cooling. There was also a contribution from the cristobalite α-β phase transition.     

Structural and electrical properties of vapour phase grown Cd1 − xFexTe single crystals

Cd_1 − xFe_xTe single crystals were prepared by vapour phase growth method in the composition range of 0 ≤ x ≤ 0.03. Chemical analysis, surface morphology, structural investigations and electrical properties were carried out by EDAX, SEM, XRD, TEM and transport technique, respectively. Microscopic variations between the target and actual compositions were noticed. Morphology studies revealed that dislocation aided growth is active in the present crystals. TEM and XRD studies confirmed that the samples of all compositions crystallized in zinc blende structure, and the lattice parameters varied almost linearly decreases with Fe content. At room temperature, the resistivity of the Cd_1 − xFe_xTe crystals of all compositions (x = 0.01, 0.015, 0.02, 0.025 and 0.03) lies in the range of 3.5-6.5 M Ω, the activation energies lie in the range of 63-133 meV, and the samples were show the ‘p’ type conductivity.     

Structural and optical properties of Zn(Mg,Cd)O alloy films grown by remote-plasma-enhanced MOCVD

We report the structural and optical properties of wurtzite-structure Zn(Mg,Cd)O ternary alloys. Wurtzite (0 0 0 1) Zn_1−xCd_xO and Mg_yZn_1−yO films were grown on (11–20) sapphire substrates using remote-plasma-enhanced metalorganic chemical vapor deposition. The large bowing parameters of Zn_1−xCd_xO and Mg_yZn_1−yO ternary alloys are 3.0 and 3.5, respectively, which reflects the large difference of each binary’s electronegativity. We have analyzed the broadening of photoluminescence (PL) in Zn(Mg,Cd)O alloys on alloy content by taking into account the statistical alloy fluctuation and the localization of the exciton, and have clarified that the localization of the exciton strongly affects to PL full-width at half-maximum (FWHM) in Zn(Mg,Cd)O alloys. The alloy broadenings in steady-state PL of Zn(Mg,Cd)O alloys are in good agreement with the calculated tendency by the theoretical model based on the statistical alloy fluctuation, while PL FWHM of Zn_1−xCd_xO is three times larger than the calculated results. Moreover, as another way to confirm alloy broadening, we also have done time-resolved PL measurements and derived the localized depth of the exciton in ZnO-based system, indicating a good agreement with the tendency of PL FWHM broadening.     

Structure and growth morphology of Gd2O3-doped CeO2 thin films

Gd₂O₃-doped CeO₂ (Gd_0.1Ce_0.9O_1.95, GDC) thin films were synthesized on (1 0 0) Si single crystal substrates by a reactive radio frequency magnetron sputtering technique. Structures and surface morphologies were characterized by X-ray diffraction (XRD), Atomic Force Microscopy (AFM) and one-dimensional power spectral density (1DPSD) analysis. The XRD patterns indicated that, in the temperature range of 200–700 °C, f.c.c. structured GDC thin films were formed with growth orientations varying with temperature—random growth at 200 °C, (2 2 0) textures at 300–600 °C and (1 1 1) texture at 700 °C. GDC film synthesized at 200 °C had the smoothest surface with roughness of R_rms=0.973 nm. Its 1DPSD plot was characterized with a constant part at the low frequencies and a part at the high frequencies that could be fitted by the f^−2.4 power law decay. Such surface feature and scaling behavior were probably caused by the high deposition rate and random growth in the GDC film at this temperature. At higher temperatures (300–700 °C), however, an intermediate frequency slope (−γ₂≈−2) appeared in the 1DPSD plots between the low frequency constant part and the high frequency part fitted by f⁻⁴ power law decay, which indicated a roughing mechanism dominated by crystallographic orientation growth that caused much rougher surfaces in GDC films (R_rms>4 nm).     

Large-size and high-quality Zn2TiO4 single crystal grown by the optical floating zone method

Crack-free and transparent Zn₂TiO₄ single crystals of 4–6 mm in diameter and 30 mm in length have been grown by the optical floating zone method. The powder X-ray diffraction (XRD) results show that the as-grown crystals have the spinel-type Zn₂TiO₄ structure. XRD² measurements on Zn₂TiO₄ wafers cut perpendicular to the growth direction display only one peak at 42.7°, which indicates that the Zn₂TiO₄ single crystals grow along the 〈4 0 0〉 direction (a-axis). The formation of bubble inclusions was effectively suppressed by lowering rotation rate. Transmission polarized-light microscopy results showed that as-grown crystals were free of low angle grain boundaries.     

Growth and microstructural features of laser ablated LiCoO2 thin films

Thin films of LiCoO₂ were prepared by pulsed laser deposition technique and the properties were studied in relation to the deposition parameters. The films deposited from a sintered composite target (LiCoO₂+Li₂O) in an oxygen partial pressure of 100 mTorr and at a substrate temperature of 300 °C exhibited preferred c-axis (0 0 3) orientation perpendicular to the substrate surface. The AFM data demonstrated that the films are composed of uniform distribution of fine grains with an average grain size of 80 nm. The grain size increased with an increase in substrate temperature. The (0 0 3) orientation decreased with increase in (1 0 4) orientation for the films deposited at higher substrate temperatures (>500 °C) indicating that the films’ growth is parallel to the substrate surface. The composition of the experimental films was analyzed using X-ray photoelectron spectroscopy (XPS). The binding energy peaks of Co(2p_3/2) and Co(2p_1/2) are, respectively, observed at 779.3 and 794.4 eV, which can be attributed to the Co³⁺ bonding state of LiCoO₂. The electrochemical measurements were carried out on Li//LiCoO₂ cells with a lithium metal foil as anode and LiCoO₂ film as cathode of 1.5 cm² active area using a Teflon home-made cell hardware. The Li//LiCoO₂ cells were tested in the potential range 2.6-4.2 V. Specific capacity as high as 205 mC/cm² μm was measured for the film grown at 700 °C. The growth of LiCoO₂ films were studied in relation to the deposition parameters for their effective utilization as cathode materials in solid-state microbattery application.     

Effect of ethylene carbonate in poly (methyl methacrylate)-lithium tetraborate based polymer electrolytes

Thin films composed of poly (methyl methacrylate) (PMMA), lithium tetraborate (Li₂B₄O₇) and ethylene carbonate (EC) were prepared by solution casting method. The highest ionic conductivity at room temperature was achieved for the composition PMMA:Li₂B₄O₇:EC (42:18:40) with the value 1.29 × 10⁻⁵ S cm⁻¹. The presence of plasticizer in the polymer complex is crucial in improving the ionic conductivity by increasing the concentration of free mobile ions through the structural conversion from crystalline to amorphous phase. This conversion lowers the viscosity of the polymer complex. Conductivity-temperature plots were found to obey Williams-Landel-Ferry (WLF) mechanism. Dielectric data was analyzed using the dielectric permittivity (ε′) and dielectric modulus (M′) of the samples. Fourier transform infrared (FTIR) studies confirmed that complexation occurs between PMMA, Li₂B₄O₇ and EC. Thermal stability of the polymer complex, which decreases with the addition of plasticizer (EC), was determined using thermal gravimetric analysis (TGA).     

Sodium tracer diffusion in glasses of the type (Na2O)0.2(B2O3)y(SiO2)0.8 − y

Sodium tracer diffusion coefficients, D^?_Na, have been measured in sodium borosilicate glasses of the type (Na₂O)_0.2(B₂O₃)_y(SiO₂)_0.8−y as a function of temperature and the composition parameter y. At constant temperature, the tracer diffusion coefficient of sodium decreases as y increases. The activation enthalpy derived from sodium tracer diffusion data for temperatures up to about 350 °C increases about linearly with increasing values of y from about 70 to 100 kJ/mol. The pre-exponential factor of the sodium tracer diffusion coefficient as a function of y varies by about one order of magnitude and has a minimum at near y = 0.3.     

A multinuclear NMR study of sodium-borovanadophosphate glasses

xNaVO₃ · yNaPO₃ · (1 − y)NaBO₂ glasses were prepared where x = 0.0, 0.05, 0.5 and 0 ? y ? 1. These glasses have been investigated with multinuclear MAS NMR. ⁵¹V NMR spectra show that two vanadate configurations are possible, assigned as four and five coordinated vanadium. The concentration of the latter group decreases upon addition of sodium-borate. The presence of four and three coordinated boron sites can be deduced from the ¹¹B NMR spectra. The latter boron sites appear only when borate groups are connected to each other. ³¹P NMR spectra of borophosphates and borovanadophosphates show that the ratio of pyro- and metaphosphates is greater in the glasses containing vanadate than in simple borophosphates. These results indicate phosphate to be the most acidic agent and therefore the best chain-terminating group in these glasses.     

Structural and optical properties in gadolinium-aluminum-lead-germanate quaternary glasses

Glasses in the quaternary system 0.05Al₂O₃·0.95[xGd₂O₃·(100-x)(7GeO₂·3PbO)] with 0 ≤ x ≤ 40 mol% have been prepared from melt quenching method. In this paper, we investigated structural and optical properties in gadolinium-alumino-lead-germanate glasses through investigations of FTIR (Fourier-Transform Infrared Spectroscopy) and UV-VIS (Ultra-Violet) spectroscopy.The observations presented in these mechanisms show that by increasing Gd₂O₃ content up to 40 mol%, the glass network modification has taken place mainly in the germanate part, while the excess of oxygen can be accommodated in the host network by the creation of shorter rings of [Ge₂O₇] structural units and the formation of [AlO₄] structural units. The affinity pronounced of the gadolinium cations towards germanate structural units produces the formation of the Gd₂Ge₂O₇ crystalline phase.The UV-VIS spectroscopy data show the charge transfer transitions of Pb^+ 2-O^− 2, Al^+ 3-O^− 2 and Gd^+ 3-O^− 2, respectively. The additional absorption in the range of 300 to 600 nm was attributed to other types of defects such as: non-bridging oxygen ions, change in valency of ions and other color centers.The values of the direct optical band gap of the glasses are determined from the optical absorption spectra. By increasing Gd₂O₃ content in the glass matrix, the optical band gap energy increases indicating changes of the lattice parameters by Gd₂O₃ incorporation.     

One-step fabrication of Fe2O3/Ag core-shell composite nanoparticles at low temperature

The Fe₂O₃/Ag core-shell composite nanoparticles were successfully prepared via a simple method at low temperature. X-ray diffraction data revealed the formation of core-shell composite nanoparticles, with Fe₂O₃ as the core and silver as the shell. The results from the transmission electron microscopy and scan electron microscopy further indicated that the composite nanoparticles were spherical with a core diameter and shell thickness of 26.0 nm and 13.5 nm, respectively. Magnetic measurements showed that the composite nanoparticles exhibited a typical ferromagnetic behavior, a specific saturation magnetization of 0.95 emu/g and an intrinsic coercivity of 104.0 Oe at room temperature. For a standard two-probe analysis at room temperature, the composite nanoparticles showed a typical conductive behavior and its conductivity was about 3.41 S/m. Moreover, this present synthesis method of Fe₂O₃/Ag core-shell composite nanoparticles shows an easy processing and does not need high-temperature calcining to attain the final product, which can be applied in a variety of areas, including catalysis, medicine, photonics, and new functional device assemblies.     

Bioactive glasses in the system CaO-B2O3-P2O5: Preparation, structural study and in vitro evaluation

Glasses in the system x B₂O₃(1 − x) [y CaO P₂O₅], (x = 0, 0.1, 0.2, 0.3, y = 2, 2.6, 3, 4, 5) have been prepared by fast quenching of high temperature melts. The presence of B₂O₃ affected the glass forming ability, allowing the preparation of calcium phosphate glasses with y ? 2.6. The structure of glasses was analyzed by μ-Raman and infrared spectroscopy. The analysis indicated that the glass network is dominated by highly charged species from phosphate tetrahedra with 3 (pyro) or 4 (ortho) NBOs, while the boron atoms are incorporated mainly in 3 coordinated sites in the form of B∅₃ or B∅₂O⁻ units. A small fraction of units was also evident from the spectra analysis of glasses with high CaO content. All calcium borophosphate glasses exhibited bioactivity after soaking in SBF solution within a few days. This was observed by μ-Raman and SEM microscopy, while XRD patterns clearly revealed growth of hydroxyapatite phase. The presence of boron in the glass network has a catalytic effect at favoring bioactivity of the otherwise bioinert calcium phosphate glasses.     

Growth and characterization of near-band-edge transitions in β-In2S3 single crystals

Single crystals of β-In₂S₃ were grown by chemical vapor transport method using ICl₃ as a transport agent. The below and above band-edge transitions in β-In₂S₃ have been characterized using optical absorption and photoluminescence (PL) measurements in the temperature range 20–300 K. Thermoreflectance (TR) and photoconductivity (PC) measurements were carried out to verify the band-edge nature of the diindium trisulfide tetragonal crystals. Experimental analyses of the transmittance, PL, PC, and TR spectra of β-In₂S₃ confirmed that the chalcogenide compound is a direct semiconductor with a band gap of about 1.935 eV at 300 K. β-In₂S₃ is familiar with its defect nature. For the β-In₂S₃ crystals, two defect emissions and two above band-edge luminescences were simultaneously detected in the PL spectra at low temperatures. The energy variations of the defect emissions showed temperature-insensitive behavior with respect to the temperature change from 20 to 300 K. Temperature dependences of transition energies of the near-band-edge (NBE) transitions below and above band gap are analyzed. The origins for the NBE transitions in the β-In₂S₃ defect crystals are discussed.     

Structural and electrical properties of lead-free perovskite ceramic: Ba(In1/2Nb1/2)O3

Lead-free perovskite Ba(In_1/2Nb_1/2)O₃ was prepared by conventional ceramic fabrication technique at 1350 °C/5 h in air atmosphere. The crystal symmetry, space group and unit cell dimensions were determined from Rietveld analysis using FullProf software whereas crystallite size and lattice strain were estimated from Williamson-Hall approach. XRD analysis of the compound indicated the formation of a single-phase cubic structure with the space group Pm3m. EDAX and SEM studies were carried out in order to evaluate the quality and purity of the compound. Complex impedance as well as electric modulus analyses suggested the dielectric relaxation to be of non-Debye type. The correlated barrier hopping (CBH) model was employed to successfully explain the mechanism of charge transport in Ba(In_1/2Nb_1/2)O₃.