Optical and spectroscopic properties of germanotellurite glasses

In this work, new glass compositions in the TeO₂-GeO₂-Nb₂O₅-K₂O system have been prepared and studied. The germanotellurite glasses were prepared by melt-quenching and their density, refractive index and characteristic temperatures have been determined. The structure of these glasses has been studied by infrared and Raman spectroscopies.The progressive replacement of TeO₂ by GeO₂ led to an increase of the glass transition and crystallisation temperatures of the glasses and a simultaneous decrease of their density and refractive index. Typical density and refractive index values of these glasses ranged from 4.98 to 3.85 g cm^− 3 and 2.08 to 1.79, respectively, with increasing GeO₂ content. The infrared spectra are dominated by a band ~ 640 cm^− 1 in the tellurite glass and ~ 800 cm^− 1 in the germanate glass. The Raman spectra of the germanotellurite glasses present an intense boson peak between ~ 34 and 47 cm^− 1, together with high frequency peaks at ~ 670 cm^− 1 and ~ 470 cm^− 1 for high tellurite and high germanate glass compositions, respectively. The vibrational spectra of these germanotellurite glasses indicate that the glass network consists basically of TeO₄ and [TeO₃]/[TeO_3 + 1] units, mixed with GeO₄ and NbO₆ polyhedra.     

Influence of TM and RE elements on glass formation of the ternary Al-TM-RE systems

The effects of TM and RE elements on glass formation ability (GFA) of the Al-TM-RE systems are studied systematically. The TM elements show distinct differences: critical sizes of the Al-TM-Ce systems are in the order of Ni > Co > Fe > Cu. However, the RE elements show similar effect on glass formation. These results are discussed in terms of the GFA-related factors, i.e., reduced glass transition temperature (T_rg = T_g (T_x)/T_L, where T_g, T_x and T_L are the glass transition temperature, onset crystallization temperature and liquidus temperature, respectively) and the mixing enthalpy ΔH_Al-TM. A new parameter of T_L − T_g (T_x) is potentially proposed and used to evaluate the GFA of the Al-based alloys, as well as bulk glass-formers.     

Influence of alkali and alkali-earth metal oxide substitutions on the properties of lithium-iron-phosphate glasses

The influences of different alkali and alkali-earth oxide substitutions on the properties of lithium-iron-phosphate (LIP) glasses have been studied. Na₂O, K₂O, MgO, CaO and BaO were used to substitute Li₂O to prepare LIP glasses with molar compositions of (20 − x)Li₂O − xR₂O(RO) − 30Fe₂O₃ − 50P₂O₅ (x = 2.4, 4, 5.6 and 7.2). The glass transition temperature (T_g) was determined by the differential thermal analysis technique. The density and chemical durability of the prepared glasses were measured based on the Archimedes principle and the weight losses after the glasses were boiled in water. The results show that T_g decreases with the initial substitutions, whereas the density and chemical durability increase. The diminution of the aggregation effect of Li⁺ ions on the glass structure due to the decrease in Li⁺ concentration, the larger molecule weights of the substitutes, the mixed-alkali and depressing effects as well the slower mobility of substitute ions mainly contribute to the initial changes in T_g, density and chemical durability of the LIP glasses, respectively. Further increasing the amounts of substitutes brings about increasing diminution of the aggregation effect of Li⁺ ions and breakage of the glass network on the one hand and increasing amounts of substitutes with larger molecule weights and ion radii on the other hand. Both aspects influence the glass properties oppositely and consequently non-monotonic variations in the properties of LIP glasses with the substitutions are observed.     

The glass transition temperature and infrared absorption spectra of: (70−x)TeO2 + 15B2O3 + 15P2O5 + xLi2O glasses

Glasses of the system: (70−x) TeO₂ + 15B₂O₃ + 15P₂O₅ + xLi₂O, where x = 5, 10, 15, 20, 25 and 30 mol% were prepared by melt quench technique. Dependencies of their glass transition temperatures (T_g) and infrared (IR) absorption spectra on composition were investigated. It is found that the gradual replacement of oxides, TeO₂ by Li₂O, decreases the glass transition temperature and increases the fragility of the glasses. Also, IR spectra revealed broad weak and strong absorption bands in the investigated range of wave numbers from 4000 to 400 cm⁻¹. These bands were assigned to their corresponding bond modes of vibration with relation to the glass structure.     

Electron spin resonance study of Fe and Mn ions in 17-year-old nuclear-waste-glass simulants containing PuO2 with different degrees of Pu substitution

In 1982, three samples of a model nuclear waste glass, DRG-P1, P2, and P3, were prepared at Pacific Northwest National Laboratory with identical chemical compositions but respectively batched with 0.0, 0.1, and 0.9 wt.% of ²³⁸PuO₂ (half life 87.8 years) partially replacing the 1.0 wt.% ²³⁹PuO₂ (half life 2410 years) present in DRG-P1. In 1999, sub-samples of these three glasses were sent to the Naval Research Laboratory, where electron spin resonance (ESR) was to be used to search for self-irradiation effects due to ²³⁸Pu α decay. However, no radiation-induced point defects associated with the aluminoborosilicate network were observed. Rather, profound α-decay-induced changes in the ESR spectra of the batched iron-group ions were found. The spectra recorded for DRG-P1 were shown by absolute spin counts to have ESR intensities equivalent to ~ 85% of the sum of the batched 8.28 mol% Fe³⁺ and 2.79 mol% Mn²⁺, assuming that all of those ions behave as paramagnetic S = 5/2 states at room temperature. (Only 1.7 mol% Ni²⁺ was batched, and ion-for-ion this S = 1 specie is calculated to contribute only ~ 1/3 of the ESR intensity of an S = 5/2 ion.) Separate experiments and calculations ruled out the possibility of small-particle magnetite-like precipitates comprising even so much as 0.01% of the total iron. A relatively weak ESR spectral feature observed in all three of the DRG-Pn samples at g = 4.3 is the known signature of dilute Fe³⁺ in glasses. By far the strongest ESR signal was found to be a broad line characterized by a first-derivative zero crossing at g = 2.06 and a peak-to-peak derivative linewidth of ~ 150 mT, both of which are shown to be virtually insensitive to temperature variations in the range 4.2 to 500 K and α-decay doses in the range provided by the 17-year aging of the three samples with differing ²³⁸Pu contents. It was discovered that these broad line shapes could be accurately simulated as weighted sums of Lorentzian shape functions of differing widths but having the same g value. The absence of any measurable anisotropy in the broad line, coupled with the temperature invariance of its width, imply the existence of extremely strong exchange interactions within clusters of Fe³⁺, Fe²⁺, Mn²⁺, and Ni²⁺ ions. The result is a speromagnetic system (amorphous antiferromagnet) characterized by progressive freezing out of like-ion pairs as the temperature is lowered, as opposed to exhibiting a distinct Néel temperature. Calculations that confirm this inference hinge on use of an equation previously derived by one of the authors [D.L. Griscom, V. Beltrán-López, C.I. Merzbacher, and E. Bolden, J. Non-Cryst. Solids 253 (1999) 1-22] that expresses the ESR intensity of ions behaving as non-interacting paramagnets as a function of their spin S, the spectrometer frequency ν, and the temperature T. The most evident ESR effect of 17 years of ²³⁸Pu decay is the (irreversible) lowering of the intensity of the broad line in rough proportion to the amount of ²³⁸Pu in the sample, with associated increases in the amplitude of the narrow g = 4.3 feature. It was additionally observed that cooling these glasses gives rise to reversible lowering of the broad-line intensity and increasing of the strength of the g = 4.3 feature when compared with theoretical expectation for temperature dependence of non-interacting S = 5/2 paramagnets. The ESR integrated intensity of the broad line as a function of ²³⁸Pu α-decay dose proved to be accurately fitted by a simple saturating exponential function asymptotic to zero for infinite-time self irradiation. This result thus promises a precise means of extrapolating thousands of years into the future the process of “super vitrification” resulting from the creation and rapid quenching of “thermal spikes” due to α decay in glasses immobilizing ²³⁹Pu or other actinide elements. In addition, because the ESR spectra of several very different candidate high-level nuclear waste (HLW) glass compositions containing even higher amounts of Fe₂O₃ are also shown here to be decomposable into sums of pure Lorentzians, the analytical method we have devised should be applicable to these and many other HLW glasses containing both iron-group oxides and radionuclides.     

Electrical properties of AsxSe1−x (x ≤ 0.05) Mott-barriers

We have experimentally measured the current-voltage and capacitance-voltage characteristics of Au/amorphous As_xSe_1 − x (x ≤ 0.05)/Zr trilayer structures at temperatures from 4 to 295 K. The observed capacitance of structures with an amorphous As_xSe_1 − x (a-As_xSe_1 − x) thickness of ~ 0.4 to ~ 2.8 μm does not significantly change over the entire range of applied bias (− 5 V to 5 V), indicating that the a-As_xSe_1 − x films are fully depleted and thus the structures are Mott barriers. The current-voltage (I-V) characteristics of the a-As_0.03Se_0.97 device at low (< 3000 V/cm) to moderate fields (3000 V/cm-10000 V/cm) follow the predictions of trap limited space charge conduction theory, as they exhibit Ohmic behavior at low fields and trap limited space charge current at moderate fields. According to the trap limited space charge current model of Lampert, the a-As_0.03Se_0.97 film has an effective hole mobility, Θμ (with Θ < 1), of ~ 5 × 10^− 7 cm²/V-sec at 295 K. This value is similar to, but consistently lower than previously reported mobilities inferred from time of flight measurements. The current at high fields (> 10⁴ V/cm) increases rapidly with applied field as a result of carrier emission from localized states and is consistent with transport by the Poole-Frenkel mechanism. A permanent transition to a high conductance state (~ 10^− 3 S) is observed after exposure to very high electric fields (~ 4 × 10⁵V/cm).     

Mg based bulk metallic glasses: Glass transition temperature and elastic properties versus toughness

In this work, optimal compositions for bulk metallic glasses (BMGs) formation in the ternary Mg-Cu-Nd and Mg-Ni-Nd systems are located at the Mg₅₇Cu₃₄Nd₉ and Mg₆₄Ni₂₁Nd₁₅, respectively, with the critical diameter of 4 mm for the rods fabricated by copper mold casting. As indicated by notch toughness testing, Mg₆₄Ni₂₁Nd₁₅ BMG (K_Q = 5.1 MPa√m) manifests higher toughness with respect to the Mg₅₇Cu₃₄Nd₉ (K_Q = 3.6 MPa√m), even though both BMGs have similar compressive fracture strength of 870-880 MPa. Such an improvement in toughness for Mg BMGs correlates with the reduction of shear modulus and the enhancement of thermal stability to resist to the structural relaxation at room temperature, which is indicated by the elevated glass transition temperature T_g. Under the Mode I loading condition, morphology in fracture surface of the Mg₆₄Ni₂₁Nd₁₅ BMG varies along the crack propagation path. Fractographic evolution of the fracture surface follows the Taylor's meniscus instability criterion. For the Mg-based BMGs, shear modulus scales with the glass transition temperature, and can be expressed as μ = 4.7 + 625T_g/V_m[1-4/9(T/T_g)^2/3]. Meanwhile, correlation between the calorimetric T_g and elastic properties at T_g can be rationalized with Egami's model.     

Electron spin resonance and magnetic studies on CaO-SiO2-P2O5-Na2O-Fe2O3 glasses

Room temperature electron spin resonance (ESR) spectra and temperature dependent magnetic susceptibility measurements have been performed to investigate the effect of iron ions in 41CaO · (52 − x)SiO₂ · 4P₂O₅ · xFe₂O₃ · 3Na₂O (2 ? x ? 10 mol%) glasses. The ESR spectra of the glass exhibited the absorptions centered at g ≈ 2.1 and g ≈ 4.3. The variation of the intensity and linewidth of these absorption lines with composition has been interpreted in terms of variation in the concentration of the Fe²⁺ and Fe³⁺ in the glass and the interaction between the iron ions. The magnetic susceptibility data were used to obtain information on the relative concentration and interaction between the iron ions in the glass.     

Viscosity, relaxation and elastic properties of photo-thermo-refractive glass

Viscometry, ultrasonic echography and mechanical spectroscopy were applied to explore the thermo-mechanical properties of a photo-thermo-refractive (PTR) glass. Newtonian shear viscosity and ultrasonic velocity were used to determine the Maxwell time of structural relaxation. Two fast relaxation modes are found in PTR glass below glass transition temperature, which are attributed to alkali and mixed cation mobility. Respective activation energies, E_γ = 72 ± 4 kJ mol⁻¹ and E_β = 117 ± 4 kJ mol⁻¹, are considerably lower than that of viscous flow at the glass transition E_α ≈ 465 kJ mol⁻¹ as quantified from mechanical spectroscopy. Decoupling ratios of E_γ/E_α = 0.155 and E_β/E_α = 0.255 are similar to those of sodium trisilicate glass but at considerably longer timescales. These observations imply that β- and γ-relaxations are delayed as local structural arrangements are more complex for the multi-component PTR glass.     

A new criterion for the glass-forming ability of liquids

Based on theoretical calculations using the fragility concept and the nucleation theory for a model glass-forming system, we propose a dimensionless criterion, ?, expressed by T_rg(ΔT_x/T_g)^a, with T_rg, the reduced glass-transition temperature, ΔT_x, the width of the supercooled liquid region when heating a glass, T_g, the glass transition temperature, and a, the exponent. The application of this simple criterion to various glasses, including network, metallic, and molecular glasses (except pure water), indicates an excellent correlation between the critical cooling rate R_c and ? in a Log R_c-? single master plot with a = 0.143.     

Stark splitting of the ground state of Er in fluorozirconate glass at low temperature

Optical properties of Er³⁺-doped ZBLAN glass matrix have been studied by luminescence spectroscopy under 488 nm excitation. The spectrum of the ⁴S_3/2⁴I_15/2 transition, carried out at temperature T = 2 K, shows a new line in the lowest energy region. This new line, centered at 17 996 cm⁻¹, was attributed to the lower transition between the Stark components of the ⁴S_3/2⁴I_15/2 transition. Measurements from T = 2 K to room temperature show the disappearance of this new line. From the results we estimate the splitting of 415 cm⁻¹ for the ground state and 100 cm⁻¹ for the ⁴S_3/2 excited multiplet. The experimental result allows us to assign the positions of the eight Stark components of the ground state multiplet of the Er³⁺ in the ZBLAN glass matrix.     

A low silica, barium borate glass-ceramic for use as seals in planar SOFCs

A low silica, barium borate glass-ceramic for use as seals in planar SOFCs containing 64 mol%BaO, 3 mol%Al₂O₃ and 3 mol%SiO₂ was studied. Coefficient of thermal expansion (CTE) between 275-550 °C, glass transition temperature (T_g), and dilatometric softening point (T_s) of the parent glass were 11.9 × 10⁻⁶ °C⁻¹, 552 °C, and 558 °C, respectively. Glass-ceramic was produced by devitrification heat treatment at 800 °C for 100 h. It was found that nucleation heat treatment, seeding by 3 wt%ZrO₂ as glass-composite and pulverization affected the amount, size and distribution of crystalline phases. SEM-EDS and XRD results revealed that crystalline phases presented in the devitrified glass-ceramic were barium aluminate (BaAl₂O₄), barium aluminosilicate (BaAl₂Si₂O₈) possibly with boron associated in its crystal structure, and barium zirconate (BaZrO₃). CTE of the devitrified glass-ceramic was in the range of (10.1-13.0) × 10⁻⁶ °C⁻¹. Good adhesion was obtained both in the cases of glass and devitrified glass-ceramic with YSZ and AISI430 stainless steel. Interfacial phenomena between these components were discussed.     

Glass transition and thermal expansivity in silica-polystyrene nanocomposites

The glass transition temperature T_g and the thermal expansion coefficient have been measured using the capacitive scanning dilatometry for silica-polystyrene (PS) nanocomposites with various silica volume fraction up to 50 vol.%. The glass transition temperatures for silica-PS nancomposites show a deviation from the bulk T_g together with a large scatter. Thermal expansivity decreases with increasing silica fraction both below and above T_g. A clear relaxation peak can be observed in the expansivity-temperature curve for silica-PS nanocomposites. The intensity of the peak decreases with increasing silica fraction. The decrement is larger than the value expected on the assumption that silica particles do not participate in the glass transition.     

Thermal stability, spectra and laser properties of Yb: lead-zinc-telluride oxide glasses

A series of new glasses of 70TeO₂-(20 − x) ZnO-xPbO − 5La₂O₃-2.5K₂O-2.5Na₂O (mol%) doped with Yb³⁺ is presented. Thermal stability, spectra and laser properties of Yb³⁺ ions have been measured. It found that 70TeO₂-15PbO-5ZnO-5La₂O₃-2.5K₂O-2.5Na₂O composition glass had fine stability ((T_x−T_g)>190 °C), high-stimulated emission cross-section of 1.25 pm² for the ²F_5/2 → ²F_7/2 transition and existed measured fluorescence lifetime of 0.94 ms and the broad fluorescence effective linewidth of 72 nm. Evaluated from the good potential laser parameters, this system glass is excellent for short pulse generation in diode pumped lasers, short pulse generation tunable lasers, high-peak power and high-average power lasers.     

Kinetic vs. thermodynamic control of crystal nucleation and growth in molten silicates

A series of calcium aluminosilicate liquids have been experimentally heat-treated at high but variable states of undercooling, from just above the glass transition to the vicinity of the solidus. The mineralogy and chemistry of crystalline phases which appear in these experiments have been quantified using a combination of Transmission Electron Microscopy and Raman spectroscopy. The results show that mineral compositions are highly variable as a function of temperature, but that changes are governed by the contrasting and strongly temperature-dependent mobilities of network-modifying and network-forming cations. Whereas equilibrium crystals form near the liquidus, disordered and non-stoichiometric phases precipitate near the glass transition. Despite this apparently complex situation, the relative importance of thermodynamic and kinetic factors is found to be a single function of T − T_g (where T is temperature and T_g the glass transition temperature), regardless of the silicate composition. The existence of this mastercurve may be used to control the composition of novel composite materials such as glass ceramics.     

Thermal properties and crystallization of iron phosphate glasses containing up to 25 wt% additions of Si-, Al-, Na- and U-oxides

The thermal properties (expansion, T_g and T_SOFT.) of glasses, having 56-66% P₂O₅, 14.8-34.2% Fe₂O₃ and 2-25 wt% additions of SiO₂, Al₂O₃, Na₂O and UO₂, were comparatively estimated from dilatometric measurements in similar conditions. The T_g reversibility was clearly verified by varying the heating rates between 1 and 5 °C min⁻¹. From linear equations fits of the various glass properties as functions of the six components it is suggested the iron, sodium and uranium oxides decrease the thermal expansion (for 50 < T ? 300 °C), T_g and T_SOFT. From DTA/XRD analysis of three glasses it was confirmed the crystallization tendency decreased with increasing the UO₂ level in the glasses. Leaching test data for two compositions containing Na₂O suggest addition of UO₂ increases the chemical durability of the related glass. The roles of UO₂, Na₂O and Fe-oxide species as structural components of the glass network are discussed.     

Structure and properties of Ni60(Nb100−xTax)34Sn6 bulk metallic glass alloys

Refractory bulk metallic glasses and bulk metallic glass composites are formed in quaternary Ni-Nb-Ta-Sn alloy system. Alloys of composition Ni₆₀(Nb_100−xTa_x)₃₄Sn₆ (x = 20, 40, 60, 80) alloys were prepared by injection-casting the molten alloys into copper molds. Glassy alloys are formed in the thickness of half mm strips. With thicker strips (e.g., 1 mm), Nb₂O₅ and Ni₃Sn phases and the amorphous phase form an in situ composite. Glass transition temperatures, crystallization temperatures, and ΔT_x, defined as T_x1 − T_g (T_x1: first crystallization temperature, T_g: glass transition temperature) of the alloys increase dramatically with increasing Ta contents. These refractory bulk amorphous alloys exhibit high Young’s modulus (155-170 GPa), shear modulus (56-63 GPa), and estimated yield strength (3-3.6 GPa).     

Theoretical studies of the spin Hamiltonian parameters and the local structures for the tetragonal Cu centers in the LKB glasses

The spin Hamiltonian parameters (g factors g_∥, g_⊥ and the hyperfine structure constants A_∥, A_⊥) for the Cu²⁺ centers in the lithium potassium borate (LKB) glasses xLi₂O·(30 − x)·K₂O·70B₂O₃ (0 ≤ x ≤ 25) were theoretically studied using the high-order perturbation formulas of these parameters for a 3d⁹ ion in a tetragonally elongated octahedron. The [CuO₆]¹⁰⁻ clusters in the LKB glasses are found to suffer the relative elongations of about 3% along the tetragonal axis due to the Jahn-Teller effect. The concentration dependences of the g factors are illustrated by the approximately linear decrease of the cubic field parameter Dq as well as the increases of the covalency factor N and the relative elongation ratio ρ due to the slight expansion of the cell volume or bond lengths with increasing the Li₂O concentration x. Meanwhile, the slow non-linear increases of the hyperfine structure constants are described as the rough exponential increase of the core polarization constant κ with x due to the increase of the tetragonality of the systems. The theoretical spin Hamiltonian parameters and their concentration dependences show good agreement with the experimental data. To evaluate validity and applicability of the present theoretical model and formulas, the EPR results of the Cu²⁺ centers in similar lithium sodium borate (LNB) xLi₂O·(30 − x)·Na₂O·70B₂O₃ (5 ≤ x ≤ 25 mol%) glasses are also analyzed and compared with those in the LKB systems using the uniform model and formulas.     

Development and characterizations of BaO-CaO-Al2O3-SiO2 glass-ceramic sealants for intermediate temperature solid oxide fuel cell application

Several compositions based on BaO-CaO-Al₂O₃-SiO₂ (BCAS) glass system have been studied in this investigation to see their applicability as sealant for solid oxide fuel cell (SOFC). The glasses as well as the corresponding glass-ceramics have been systematically characterized by differential thermal analysis, dilatometry, X-ray diffractometry, electron microscopy and impedance analysis to examine their suitability as sealant. While the glass transition temperature (T_g) determined from DTA are within 600-665 °C, the coefficient of thermal expansion (CTE) can be tailored between 9.5 and 13.0 × 10⁻⁶ K⁻¹. These glasses are found to be well adhered with metallic interconnects, such as commercial ferritic steel (Crofer22APU), at an optimum sealing temperature of 850 °C. The shrinkage behavior of the developed glasses in their pellet form has also been investigated. The resistivities of the glass-ceramics, as obtained from impedance analysis, are found to be within 10⁴-10⁶ Ω cm at 800 °C. Under sandwiched condition between two metals, some of the developed compositions are found to maintain this high resistivity even after 100 h of operation. One of the glass compositions has shown a low leak-rate of the order of ∼10⁻⁷ Pa m² s⁻¹.     

Planar waveguides by ion exchange in Er-doped tellurite glass

This work reports the preparation of planar waveguides by Ag⁺ → Na⁺ ion exchange in Er³⁺-doped tellurite glass with a composition of 75TeO₂-2GeO₂-10Na₂O-12ZnO-1Er₂O₃ (mol%). The metric, of T_x − T_g, indicates that the glass has good thermal stability. Measurments of refractive index, absorption spectrum, luminescence and lifetime were made. The glass was chemically stable during the ion exchange process. Monomode and multimode planar waveguides in the tellurite glasses have been prepared. We determined the depth of the guides, effective diffusion coefficient and the activation energy. The depths of the waveguides could be controlled by varying ion exchange temperatures and times (250-280 °C, and 3-12 h were used).