Simple screening method for the fast determination of clenbuterol in animal feeds

Summary A simple method for the determination of clenbuterol is described. It is extracted from the sample at pH 3 and then at pH 11, followed by partitioning the analyte into water at pH 3 and reextraction into ethyl acetate at pH 9. Clenbuterol is oxidized with KMnO₄ to clenbuteron for GC-determination. Recoveries for 0.01– 1.0 mg/kg were between 70% and 110% (standard deviation ±14%, n = 18).

---

Eine einfache Screening-Methode zur schnellen Bestimmung von Clenbuterol in tierischen Futtermitteln

     

Tail-end purification of americium from plutonium loading effluents using a mixture of octyl (phenyl)-N,N-diisobutylcarbamoylmethylphosphine oxide and tri-N-butyl phosphate

The tail-end purification of Am from Pu loading effluents in 7.5M HNO₃ containing 160 mg l^–1 Am and 1.2 mg l^–1 Pu has been carried out. With 0.2M CMPO+1.2M TBP in dodecane as the extractant and stripping by 0.04M HNO₃+0.05M NaNO₂, the Pu level is brought down to 31.2 g l^–1. When the acidity was reduced to 4.2M HNO₃, one contact with 20% TLA/dodecane and subsequent extraction by a mixture of CMPO and TBP and stripping with 0.04M HNO₃+0.05M NaNO₂ gave Am samples without any detectable amounts of Pu. The recovery of Am was 90% by the first procedure and 98% by the second one.     

Über einige Komplexboride von Übergangsmetallen

Zusammenfassung Dreistofflegierungen in dem Kombinationen {Mo, W}-{Fe, Co, Ni}-B; {V, Nb, Ta, Mo, W}-B-Al werden vornehmlich auf die Existenz von Komplexboriden hin untersucht. Die isotypen Phasen Mo₂CoB₂, Mo₂NiB₂, W₂FeB₂, W₂CoB₂ und W₂NiB₂ sind strukturell mit Mo₂FeB₂ verwandt, aber doch von dieser Phase verschieden. Gefunden werden außerdem die isotypen Phasen MoCoB und WCoB. Das Problem der -Phase wird diskutiert. In manchen Fällen tritt ein Zwischenzustand auf, der vermutlich durch Stapelfehler einer Unterzelle (c/3 in hexagonaler Aufstellung) hervorgerufen wird. Neben dem Auftreten ternärer Phasen bei Nb-B-Al und Ta-B-Al wird eine ausgeprägte Mischphasenbildung: (Nb, Al)B₂ und (Ta, Al)B₂ beobachtet. Der Dreistoff: Mo-B-Al ist durch die ternäre Phase MoBAl gekennzeichmet, ferner tritt der durch Al stabilisierte CrB-Typ auf (Mo_0,45B_0,50Al_0,05). Die Gleichgewichtsverhältnisse in denT-B-Al-Dreistoffen werden abgeschätzt.

---

Alloys of the combinations {Mo, W}-{Fe, Co, Ni}-B, {V, Nb, Ta, Mo, W}-B-Al have been examined with respect to the existence of complex borides. The phases of the approximate formula Mo₂CoB₂, Mo₂NiB₂, W₂FeB₂, W₂CoB₂ and W₂NiB₂ have been found to be isotypic. They do however not correspond to Mo₂FeB₂ having U₃Si₂ structure. Two other complex borides of formula MoCoB and WCoB have been detected having the same crystal structure. The problem of the -phases which partially contain boron will be discussed considering the supposedly occurring stacking faults of a subcell unit (c=c/3 for hexagonal symmetry). Besides formation of ternary compounds for: Nb-B-Al and Ta-B-Al an extended solid solution (Nb, Al)B₂ and (Ta, Al)B₂ has been observed. The Mo-B-Al-system is characterized by the ternary phase of formula MoBAl. Mo-monoboride having CrB-type has been found to be stabilized by a small amount of Al, thus Mo_0,45B_0,50Al_0,05 being formed. The phase equilibria within the ternary systems have been established for the major part.

---

---

Mit 4 Abbildungen     

Neue τ-Boride

The following -borides have been synthesized: Cr₁₃Ir₁₀B₆, Mn₁₆Ir₇B₆, Fe_10–15.4Ir_13–7.6B₆, Co₁₅Ir₈B₆.

---

---

Mit 1 Abbildung

---

Herrn Prof. Dr.A. Knappwost in Freundschaft gewidmet.     

Insertion of 3d- and 4f-Elements into Silver Iodide

The interaction of manganese and some 4f-metals (M) with silver iodide is studied. The samples are obtained by sputtering M onto the surface of polycrystalline AgI films (0.2 m, 300 K) in a vacuum. Optical absorption in the samples is interpreted as the insertion of M ions into AgI with the formation of dopants AgI:M. A new phase with an optical bandgap of 3.7 eV emerges in the samples with elevated concentrations of La, Ce, Pr, Nd, Sm, or Dy (n _M/n _Ag 0.1). X-ray diffraction patterns for such samples with Sm correspond to structures with large interfacial distances, for example, 0.99, 0.87, 0.76, and 0.67 nm. In air, AgI forms in the samples with a new phase; this process is hindered by the sputtered protective coatings. According to optical absorption data, X-ray diffraction, and local microanalysis the Mn insertion into AgI is followed by the formation of a new phase (2Ag:Mn:4I), which may belong with solid electrolytes Ag₂MI₄, where nonmagnetic M are known (Zn, Cd, Sn, Hg, Pb).     

On the use of a dead-time meter for pile-up corrections

Correction for pile-up losses in the amplifier is possible by the dead-time fraction indicator of the ADC in case of long-lived radionuclides. If the dead-time meter has been calibrated, an accuracy of 1.5% is feasible up to a dead-time fraction of 25%. The precision decreases from 1.5% at 10% dead-time fraction to 3% at a deadtime fraction of 30%.     

Das Solvosystem Phosphoroxychlorid, 23. Mitt.: Photometrische Titrationen von Chloriden mit Eisen(III)-chlorid

Zusammenfassung Zahlreiche kovalente Chloride bilden mit FeCl₃ in POCl₃ Chloroniumtetrachloroferrate. HgCl₂, BCl₃, TiCl₄, SnCl₄ und PCl₅ geben ein Chloridion, ZnCl₂ und AlCl₃ zwei Chloridionen, letzteres zum Teil auch das dritte Chloridion an FeCl₃ ab. Die Donorstärke nimmt in der Reihe Et₄NClKCl1/2 ZnCl₂ 1/2 AlCl₃>TiCl₄>PCl₅1/3 AlCl₃[SbCl₆]^–HgCl₂ >BCl₃SnCl₄ ab. SbCl₅ ist in POCl₃ ein stärkerer Akzeptor als FeCl₃. Die Unterschiede gegenüber dem Lösungsmittel Phenylphosphoroxychlorid werden diskutiert.Mit 1 Abbildung22. Mitt.:M. Baaz, V. Gutmann undL. Hübner, Mh. Chem.91, 694 (1960).     

Study of free volume parameters of polystyrenes of different molecular architecture by positron annihilation lifetime measurement

Differences of size, content and size distribution of free volumes in linear branched and three-armed polystyrenes, synthesized by radical and anionic processes, were observed by positron annihilation lifetime measurements. The temperature dependence of an average free volume radius was quite similar among polystyrenes of different architectures and molecular weight distributions. The free volume radius increased with temperature, from 0.27 nm (T:60 K) to 0.29 nm (T:260 K) and 0.30 nm (T _g:363 K), then to 0.35 nm (423 K), showing turning at and transition temperature. The free volume content decreased from 60 K to 220 K to 300 K showing peculiar minimum at 220 K to 300 K depending on the molecular shape, increased above 320 K, upto 340 to 360 K. The free volume contents decreased with an increase of molecular weight and by an addition of oligomer or plasticiser, suggesting differences in relaxation time or molecular motion between the edge and middle portions of molecular chain and filling effect of smaller molecules in free volumes, respectively. The apparent free volume fraction showed clear variations atT andT _g. Size distribution of free volumes suggested more complicated behavior of free volume upon the molecular relaxations and filling effect.     

The influence of ionic surfactants on the acid-base properties and tautomeric equilibrium of 2-dimethylaminomethylphenol

Shifts in the acid-base and tautomeric equilibria have been observed in aqueous solutions of 2-dimethylaminomethylphenol (DAMP) containing surfactants. Cationic micelles of cetyltrimethylammonium bromide increase the dissociation constants of DAMP (pK₁ 0.3, pK₂ 0.5), and anionic micelles of sodium dodecyl sulfate reduce them (pK₁ 1.5, pK₂ 0.3). The constant of tautomeric equilibrium decreases when ionic surfactants are added. This is connected with the better solubilization of the neutral form by micelles.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1215–1218, July, 1994.     

Catalyzed Determination of Phenylalanine with a Mimic Enzyme Constructed of β-Cyclodextrain Derivant

Phenylalanine was catalyzed and determined with mimic phenylalanine oxidase constructed by the reaction of -cyclodextrin (or -CD) and m-carboxyl benzenesulfonyl chloride with iron trichloride in hydrogen peroxide. The method is simple and convenient. The linear range of this method is 0–0.8233 mmol/L, the detection limit is 8.354 mol/L, the RSD is 0.96% (n = 8), and the recovery rate is 95.8–103.5% when used to test an edulcorator (aspartame) sample.     

Influence of Cyclodextrins on the Kinetics of Oxidation of Amino Acids and BSA by Hydrazyl Radicals

The kinetics of oxidation of amino acids (Arg, His, Lys, Phe, Thr and Tyr), a dipeptide (Gly-His), and BSA (bovine serum albumin) by two persistent water soluble free radicals of the hydrazyl type has been studied.The rate decreases in the order Arg>Lys>Tyr>Thr>HisBSAPheGly-His with bothfree radicals. Addition to the reaction mixture of - and -cyclodextrin decreases the oxidation rate, probably due to amino acidencapsulation in the cyclodextrin cavity. -Cyclodextrin protects more efficiently against oxidation than -cyclodextrin.     

Kinetic dual standard additions method for the determination of two mutually interfering analytes: Molybdate and tungstate

A kinetic dual standard additions method for determination of two mutually interfering analytes is proposed. The deviations of absorbance from additivity in kinetic systems, caused by synergistic effects of catalysts, are compensated with the defined synergistic catalytic coefficient. The hydrogen peroxide-iodide kinetic reaction catalysed by molybdate and tungstate was studied with the stopped-flow injection technique and the conditions for simultaneous determination of Mo and W established. The molybdenum and tungsten contents in different samples were determined with recoveries of 97.6 102.1% and 96.9 98.6%, and relative standard deviations of 2.3 3.4% and 1.6 2.6%, respectively.     

Fabrication and Characterization of Sol-Gel GeO2-SiO2Erbium-Doped Planar Waveguides

GeO2-SiO2 sol-gel planar waveguides doped with Er were deposited by spinning on silica substrates. P2 O5 or Al2O3 were used as co-dopants to improve erbium dissolution in the GeO2-SiO2 matrix. Multilayer amorphous films were obtained at 600 or 700°C.Er ions in the planar waveguide pumped at 980 nm showed fluorescence features around 1530 nm. Narrow fluorescence spectra (20 nm) and long lifetimes (6 ms) were found in P2O5 co-doped samples, whereas Al2O3 co-doping gave wider spectra (50 nm) with slightly lower lifetimes (5 ms). The quenching concentration in the Al2O3 co-doped samples was 0.9 mol% Er.Heat treatments in CCl4 improve the active properties and the addition of Yb enhances the pump absorption efficiency.     

Donorstärken in 1,2-Dichloräthan

Zusammenfassung Kalorimetrische und spektrophotometrische Untersuchungen über die Donorstärke einer Anzahl nicht-wäßriger Lösungsmittel zeigen, daß die relative Reihung der Donorstärken unabhängig von der Natur des Akzeptors ist. Die Donorreihung lautet gegenüber SbCl₅, Jod und Phenol folgendermaßen: Pyridin > Dimethylsulfoxid > Dimethylacetamid Dimethylformamid > > Trimethylphosphat Diphenylphosphoroxychlorid > Diäthyläther > Aceton > Propandiol-1,2-carbonat > Acetonitril > > Selenoxychlorid Phosphoroxychlorid Benzoylchlorid > > Thionylchlorid > Sulfurylchlorid.

---

Calorimetric and spectrophotometric work on the donor strength of various non-aqueous solvents have shown that the relative order of donor strength is independent from the nature of the acceptor. The order of donor strength towards SbCl₅, I₂ and phenole is pyridine > dimethylsulfoxide > dimethylacetamide dimethylformamide > trimethylphosphate diphenylphosphonic chloride > diethyl ether > acetone > propane diol-1,2-carbonate > acetonitrile > selenium oxychloride phosphorus oxychloride benzoyl chloride > thionyl chloride > sulfuryl chloride.

---

---

Mit 1 Abbildung     

3, 3, 3-Trifluoropropyl(methyl)cyclosiloxanes

The influence of the number of 3, 3, 3-trifluoropropyl(methyl)siloxane links (/) in the cyclotetrasiloxanes _mD_4-m, where D represents the dimethylsiloxane link and m=0–4, on the rearrangement of these compounds in acetone solution under the action of sodium siloxanolate has been studied. The rearrangement takes place with the formation of a linear polysiloxane the degradation of which yields, in addition to the initial ring, cyclosiloxanes with a different structure. The rate of rearrangement of _mD_4-m and of the formation of a linear polysiloxane rises with an increase in m from 0 to 3. The equilibrium concentration of the linear polysiloxane formed from _mD_4-m is inversely proportional to m. Results have been obtained on the kinetics of the formation of the cyclosiloxanes _mD_n, where m=0–5, n=0–5, and m+n=3–6, in the rearrangement of the rings D₃, ₂D₂, ₃D, and ₄. The reactivity of the siloxane links rises in the sequence (CH₃)₂Si-O-Si(CH₃)₂ < (CF₃CH₂CH₂)-(CH₃) Si-O-Si(CH₃)₂ <(CF₃CH₂CH₂) (CH₃)Si-O-Si(CH₃) (CH₂CH₂CF₃) . Because of the negative inductive effect transferred through the siloxane links, the 3, 3, 3-trifluoropropyl groups strongly activate the siloxane ring with respect to nucleophiiic reagents.For part I, see [3].     

Contribution of EBSD to the Understanding of Massive γ Transformation in TiAl

The massive transformation which occurs after adequate thermal treatment in TiAl alloys with 48 at % Al has been investigated by EBSD analysis. A particular crystallographic relation between the _m nucleus and the adjacent ₂ grain has been demonstrated. The relations between adjacent _m domains have also been characterized. These results confirm previous assumptions about the mechanism of the massive transformation.     

Enthalpy of Solution of Squalane in Alcohols

Enthalpy of solution at 25°C of squalane in butyl alcohols and 1-octanol is determined calorimetrically. The endothermic effect of dissolution increases in the order 1-OctOH < BuOH < i-BuOH < t-BuOH. A linear correlation is found between the enthalpies of solution of squalane and hexadecane, from which the enthalpy of solution of squalane in methanol is determined. The contributions of the cavity formation and solute-solvent interaction to the enthalpy of solution are estimated by multiple regression analysis. The enthalpy of cavity formation is only slightly dependent on the length of the main chain of an alcohol and also on the branching type, varying in the order 1-OctOH BuOH i-BuOH < MeOH s-BuOH < t-BuOH. Interaction of squalane with alcocols increases in the order MeOH < t-BuOH < BuOH < i-BuOH s-BuOH < 1-OctOH.     

The role of intra- and intermolecular hydrogen bonds in the formation of β-cyclodextrin head-to-head and head-to-tail dimers. The results of ab initio and semiempirical quantum-chemical calculations

The conformation of a free -cyclodextrin molecule optimized by the MNDO/PM3 quantum-chemical calculations has C₇ symmetry. The right orientation of the interglucose hydrogen bonds in -cyclodextrin, in which the 2-OH groups act as the proton donors and the O atoms of the nearby 3"-OH groups function as the proton acceptors, is advantageous for thermodynamic reasons. The ring of seven H bonds thus formed stabilizes the symmetrical form of -cyclodextrin. The -cyclodextrin head-to-head dimer has D ₇ symmetry and consists of molecules whose 2-OH groups partcipate as proton donors in the formation of fourteen complementary intermolecular hydrogen bonds. The energy of H bonds in the -cyclodextrin monomer and dimer was estimated to be 1.0--1.4 kcal mol^–1. Of the two possible -cyclodextrin dimers, the head-to-tail dimer is more thermodynamically stable. The thermodynamic preference of the right orientation of the inter-glucose H bonds in -cyclodextrin was confirmed by the MP2/6-31G(d,p)//6-31G(d,p) ab initio calculations for maltose (-glucodioside). The maltose molecule with inter-glucose H bonds of the type 2-OHO(3")-H is more stable than the structure with the H-(2)OH-O(3") orientation of H bonds with a difference of 2.7 kcal mol^–1. According to the MNDO/PM3 method, the maltose structure with the right H bond orientation is more stable by 3.1 kcal mol^–1.     

Non-Aqueous Capillary Electrophoresis with Indirect Photometric Detection for Direct Analysis of Pb2+, Zn2+ and Cd2+ Ions

A new approach, based on non-aqueous capillary electrophoresis separation and indirect photometric detection, was established for the determination of the transition metal ions Pb²⁺, Zn²⁺ and Cd²⁺. Under optimized conditions, the method produced baseline separation of these three metal ions. The linear range and detection limits were 1050µM, 1.9µM for Cd²⁺; 1050µM, 2.1µM for Zn²⁺; and 20100µM, 3.8µM for Pb²⁺, respectively.     

Preparation and Characterization of Germanium Sulfide Based Sol-Gel Planar Waveguides

Germanium sulfide based glass films have been deposited by spin-coating onto single crystal silicon wafers and silica glass disks, using the reaction between GeCl₄, either pure or doped with of 5 mol% of SbCl₃, dissolved in toluene, with H₂S. The films, heat-treated under different conditions, were characterized by X-ray diffraction, infrared spectroscopy, X-ray photoemission spectroscopy, mechanical profilometry and ellipsometry. Oxide contamination was found in these films, but this was reduced or even eliminated by a heat-treatment in H₂S gas, at 270°C. A maximum film thickness of 1.3 m was achieved and the refractive indices of the films were in the range of 1.9–2.8 at 633 nm. Propagated light was observed by butt-coupling, for waveguides deposited on silica glass disks, at = 633 nm. Optical losses in the range of 1.1–1.9 dB/cm were measured at this wavelength, for different regions of different planar waveguides. The present method has achieved reasonably low loss and low levels of oxide contamination, which are promising for active applications.