Kinetic Study of Chelates of 2,2,6,6-tetramethyl-3,5-heptanedione with Some Lanthanide Elements

The thermal decomposition reactions of crystalline chelates of general formula Ln(thd)₃ (Ln=La,Pr, Nd, Sm and Gd; thd=2,2,6,6-tetramethyl-3,5-heptanedione) have been studied by isothermal thermogravimetry. Several models were proposed initially to calculate the kinetic parameters by isothermal method, thus the time reduced method was used to define the best kinetic models. The Avrami–Erofeev (Am=2, 3 and 4) and R1 and R2 models presented good agreement with experimental data, as well as, linear correlation coefficient (r) and standard deviation (s). This revised version was published online in July 2006 with corrections to the Cover Date.     

The mean enthalpy of the lanthanide-oxygen bond in 2,2,6,6-tetramethyl-3,5-heptanedione chelates of praseodimium and holmium

The general thermochemical reaction LnCl₃·6H₂O(c)+3Hthd(1)+73.92H₂O(1) = Ln(thd)₃(c) +3HCl·26.64H₂O(aq); rHm (Ln = Pr, Ho and thd = 2,2,6,6-tetramethyl-3,5-heptanedionate) was employed to determine through solution-reaction calorimetry at 298.15 K the standard molar enthalpies of formation of crystalline chelates, –2434.3±11.5 (Pr) and –2384.8±11.5 (Ho) kJ mol^–1. These values and the corresponding molar enthalpies of sublimation enabled the determination of the standard molar enthalpies of chelates in the gaseous phase. From these values the mean enthalpies of the lanthanide-oxygen bond, 265±10 (Pr) and 253±10 (Ho) kJ mol^–1 were calculated.     

The molecular composition of non-modified and acac-modified propoxide and butoxide precursors of zirconium and hafnium dioxides

Long-term storage at 0 °C of a paraffin-sealed flask with commercial 70 wt% solution of zirconium n-propoxide in n-propanol resulted in crystallization of an individual oxoalkoxide complex Zr₄O(OⁿPr)₁₄(ⁿPrOH)₂ in over 20% yield. The structure of this molecule can be described as a triangular Zr₃(μ₃-O)(OR)₁₀(ROH) core of 3 edge-sharing octahedrons with an additional Zr(OR)₄(ROH) unit attached through a pair of (μ-OR) bridges. Mass spectrometric and ¹H NMR investigation of the commercial samples of the most broadly applied zirconium and hafnium n-propoxides and n-butoxides indicate the presence of analogous species in the commercial alkoxide precursors. The content of oxo-alkoxide species in the commercial precursors has been estimated to be ~20% for n-propoxide and ~35% for zirconium n-butoxide. A new route has been presented for synthesis of the individual crystalline mixed ligand precursor [Zr(OⁿPr)(OⁱPr)₃(ⁱPrOH)]₂, from zirconium n-propoxide. A high yield has been observed (~90%), indicative of an almost complete precursor transformation. Mass spectrometry has shown that the synthesized mixed ligand precursor is dimeric, which makes it an attractive alternative to zirconium n-propoxide. Addition of 1 eq of Acetylacetone to zirconium or hafnium alkoxide precursors results in formation of dimeric [M(OR)₃(acac)]₂ in high yields. These species have limited stability (much higher for Hf than for Zr) and transform in solution into hydrolysis-insensitive M(acac)₄ through very unstable M(acac)₃(OR) intermediates containing 7-coordinated metal centers. This transformation can be followed kinetically in hydrocarbon solvents by ¹H NMR and is noticeably accelerated by addition of parent alcohols. The obtained results clearly reveal limited applicability of EXAFS and XANES techniques for the study of such systems, especially in the context of structure prediction. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

The vapour pressures of several metal-2,2,6,6-tetramethyl-3,5-heptanedione complexes measured by a Knudsen effusion method

The melting points, vapour pressures and heats of sublimation of the complexes of Ga, In, Y, La, Gd, Fe, Zn, Pb and Li with 2,2,6,6-tetramethyl-3,5-heptanedione are reported for the temperature range below the melting point of 40? to 250?C and pressures from 10 to 10^?2 torr. The measurements were made with an easily constructed Knudsen effusion cell in conjunction with a Mettler thermobalance.     

Crystal structure of oxotitanium(IV) 2,2,6,6-tetramethyl-3,5-heptanedionate

The structure of titanyl dipivalylmethanate TiO(dpm)₂ has been studied by X-ray diffraction analysis. The compound has a molecular structure formed by isolated centrosymmetrical dimers [TiO(dpm)₂]₂; the unit cell contains two structurally related, crystallographically unique binuclear molecules. The Ti...Ti distance in the dimer is 2.73 Å. Crystal data for Ti₂C₃₆H₇₆O₁₀: a = 32.477(6) Å, b = 14.409(3) Å, c = 25.630(5) Å; β = 107.82(3)°, space group C2/c, Z = 8, d _calc = 1.002 g/cm³.     

Stabilization and destabilization of zirconium propoxide precursors by acetylacetone

The stabilizing and destabilizing mechanism in the action of acetylacetone on zirconium propoxide precursors is revealed; the nature of heteroleptic intermediates provides an explanation.     

Copper bis(2,2,6,6-tetramethyl-3,5-heptanedionate) catalyzed synthesis of N-substituted ferrocenes

An efficient catalytic protocol for the Ulmann-type coupling reaction of both bromo and iodoferrocene with heterocyclic amines using a stable and well defined copper bis(2,2,6,6-tetramethyl-3,5-heptanedionate) complex has been developed. The protocol was applicable for the synthesis of wide variety of N-substituted ferrocenes and the desired products were obtained in good to excellent yields.     

Palladium bis(2,2,6,6-tetramethyl-3,5-heptanedionate) catalyzed Suzuki, Heck, Sonogashira, and cyanation reactions

Palladium bis(2,2,6,6-tetramethyl-3,5-heptanedionate): a structurally well-defined O-containing transition metal complex is reported as an efficient catalyst for Suzuki, Heck, and Sonogashira cross-coupling reactions. The protocol was also applied successfully for cyanation of aryl halides under milder operating conditions. The system tolerated the coupling of various aryl halides with alkenes, alkynes, and organoboronic acid along with the cyanation of aryl halides providing good to excellent yields of desired products.     

Vapor pressure, kinetics and enthalpy of sublimation of bis(2,2,6,6-tetramethyl-3,5-heptanedionato)copper(II)

The kinetics of sublimation of bis(2,2,6,6-tetramethyl-3,5-heptanedionato)copper(II), [Cu(tmhd)₂] was studied by non-isothermal and isothermal thermogravimetric (TG) methods. The non-isothermal sublimation activation energy values determined following the procedures of Friedman, Kissinger, and Flynn–Wall methods yielded 93 ± 5, 67 ± 2, and 73 ± 4 kJ mol⁻¹, respectively and the isothermal sublimation activation energy was found to be 97 ± 3 kJ mol⁻¹ over the temperature range of 375–435 K. The dynamic TG run proved the complex to be completely volatile and the equilibrium vapor pressure (p_e)_T of the complex over the temperature range of 375–435 K determined by a TG-based transpiration technique, yielded a value of 96 ± 2 kJ mol⁻¹ for its standard enthalpy of sublimation (Δ_subH°).     

N-Arylation of aliphatic, aromatic and heteroaromatic amines catalyzed by copper bis(2,2,6,6-tetramethyl-3,5-heptanedionate)

Copper bis(2,2,6,6-tetramethyl-3,5-heptanedionate) was found to be an efficient catalyst for N-arylation of aliphatic, aromatic and heteroaromatic amines with aryl iodides/bromides under mild conditions. The system tolerated a variety of hindered and functionalized amines/aryl halides and the desired N-aryl amines were obtained in good to excellent yields.     

Synthesis of Benzimidazoles and Benzoxazoles Using Palladium Bis(2,2,6,6-tetramethyl-3,5-heptanedionate) as a Novel Catalyst

Structurally well-defined palladium bis(2,2,6,6-tetramethyl-3,5-heptanedionate) complex is reported to be an efficient catalyst for the synthesis of benzimidazole and benzoxazole derivatives in good yields. A novel approach for one-pot synthesis of benzimidazoles via direct reductive amination and N-arylation followed by hydrogenation–cyclization methodology is also described.     

Decomposition behavior of M(DPM)n (DPM = 2,2,6,6-tetramethyl-3,5-heptanedionato; n = 2, 3, 4)

The decomposition behavior of M(DPM)n (DPM = 2,2,6,6-tetramethyl-3,5-heptanedionato; M = Sr, Ba, Cu, Sm, Y, Gd, La, Pr, Fe, Co, Cr, Mn, Ce, Zr; n = 2-4) was studied in detail with infrared spectroscopy and mass spectrometry. The results indicated that the chemical bonds in these compounds dissociate generally following the sequence of C-O > M-O > C-C(CH3)3 > C-C and C-H at elevated temperatures. The decomposition processes of M(DPM)n are strongly influenced by the coordination number and central metal ion radius. In addition, the decomposed products, in air atmosphere, varied from metal oxides to metal carbonates associated with different M(DPM)n.     

Crystal structure and vapor pressure of a copper(II) complex with 2,2,6,6-tetramethyl-4-fluoroheptane-3,5-dione

Synthesis and single crystal X-ray diffraction study were carried out for copper(II) 2,2,6,6-tetramethyl-4-fluoroheptane-3,5-dionate (Bruker AXS P4 automated diffractometer, MoK _α radiation). Crystal data for C₂₂H₃₆CuF₂O₄: a = 5.9165(4) Å, b = 10.2787(7) Å, c = 10.5223(8) Å, α = 81.383(3)°, β = 76.106(3)°, γ = 83.778(3)°, space group P $\bar 1$ , V = 612.42(7) ų, Z = 1, d _x = 1.264 g/cm³. The structure is molecular; the copper atom has a square plane coordination formed by the oxygen atoms of two β-diketonate ligands; the average Cu-O distance is 1.895 Å, ∠O-Cu-O 92.5°. Only van der Waals interactions are realized between the molecules in the structure. The temperature dependences of the saturated vapor pressure were studied by the mass transfer technique, and the standard thermodynamic parameters of sublimation were derived for the complex, ΔH _subl ⁰ = 115.6 ± 1.1 kJ/mol, ΔS _subl ⁰ = 204.9 ± 2.5 J/mol·K.     

Palladium bis(2,2,6,6-tetramethyl-3,5-heptanedionate): an efficient catalyst for regioselective C-2 arylation of heterocycles

Palladium bis(2,2,6,6-tetramethyl-3,5-heptanedionate), a structurally well defined O-containing transition metal complex is reported as an efficient catalyst for regioselective direct C-2 arylation of heterocycles with aryl halides. The present protocol is applicable to a wide variety of heterocycles providing good to excellent yields of products.     

Wavelength dependent photofragmentation patterns of tris(2,2,6,6-tetramethyl-3,5-heptanedionato)Ln (III) (Ln = Eu, Tb, Gd) in a molecular beam

Laser photoionization and ligand photodissociation in Ln(thd)(3) (Ln = Eu, Tb, Gd; thd = 2,2,6,6-tetramethyl-3,5-heptanedionato) are studied in a molecular beam via time-of-flight mass spectrometry. The fragmentation patterns are strongly wavelength dependent. With 355 nm excitation, the mass spectrum is dominated by Ln(2+), Ln(+), and LnO(+) fragments. The bare Ln ions are believed to arise from photoionization of neutral Ln atoms. The Ln atoms, in turn, are produced from the Ln(thd)(3) complex in a sequence of Ln reductions (through ligand-to-metal charge-transfer transitions), with each reduction being accompanied by the dissociation of a neutral ligand radical. In contrast, under visible-light (410-450 nm) excitation, a significant Ln(thd)(n)(+) signal is observed (where n = 2,3 for Ln = Tb,Gd and n = 1-3 for Ln = Eu). Thus, with visible excitation, photoionization of Ln(thd)(n) competes effectively with the Ln-reduction/ligand-dissociation sequence that leads to the dominant bare Ln-ion signal seen with 355 nm excitation. The fact that monoligated Ln(thd)(+) is observed only for Ln = Eu is interpreted in terms of the relative accessibility of an excited ligand-to-metal charge-transfer state from the ground electronic state of neutral Ln(thd).