Oxidative degradation of phenols in sono-Fenton-like systems upon high-frequency ultrasound irradiation

The kinetics of oxidative degradation of phenol and chlorophenols upon acoustic cavitation in the megahertz range (1.7 MHz) is studied experimentally in model systems, and the involvement of in situ generated reactive oxygen species (ROSs) is demonstrated. The phenols subjected to high frequency ultrasound (HFUS) are ranked in terms of their rate of conversion: 2,4,6-trichlorophenol > 2,4-dichlorophenol ~ 2-chlorophenol > 4-chlorophenol ~ phenol. Oxidative degradation upon HFUS irradiation is most efficient at low concentrations of pollutants, due to the low steady-state concentrations of the in situ generated ROSs. A dramatic increase is observed in the efficiency of oxidation in several sonochemical oxidative systems (HFUS in combination with other chemical oxidative factors). The system with added Fe²⁺ (a sono-Fenton system) derives its efficiency from hydrogen peroxide generated in situ as a result of the recombination of OH radicals. The S₂O₈^2-/Fe²⁺/HFUS system has a synergetic effect on substrate oxidation that is attributed to a radical chain mechanism. In terms of the oxidation rates, degrees of conversion, and specific energy efficiencies of 4-chlorophenol oxidation based on the amount of oxidized substance per unit of expended energy the considered sonochemical oxidative systems form the series HFUS < S₂O₈^2-/HFUS < S₂O₈^2-/Fe²⁺/HFUS.     

Hydrolysis and stabilization performance of bis(2,4-di-t-butylphenyl)pentaerythrityl diphosphite in polypropylene

The mechanism of hydrolysis under the conditions of long-term storage and the effect on stabilization efficiency of bis(2,4-di-t-butylphenyl)pentaerythrityl diphosphite (PA) was studied. Hydrolysis of P-1 under air in normal humidity begins by the cleavage of P---O_phenol bond, and both 2,4-di-t-butylphenols (DTBP) from one P-1 molecule are preferably released.

A series of samples hydrolyzed to different degrees was tested both alone and in blends with tetrakis (methylene 3-(3,5-di-t-butyl-4-hydroxyphenyl)propionate) methane (AO-1) as processing and long-term antioxidants in polypropylene. P-1 was found to perform as an efficient processing antioxidant even in the absence of phenolics. Hydrolyzed P-1, characterized by the presence of 7% of free DTBP released, exhibited an improved performance. P-1 subjected to hydrolysis up to 48% was shown to retain good stabilization efficiency.     

Extraction and quantification of antioxidants from low-density polyethylene by microwave energy and liquid chromatography

In this paper a experimental design is applied to optimize the quantification of hindered phenol Irganox 1076, phosphite antioxidant Irgafos 168 and their oxidized product tri[2,4-di-tert-butylphenyl]phosphate from low-density polyethylene (LDPE). The developed analytical method consists of two steps: microwave-assisted extraction and reversed-phase liquid chromatography (LC) coupled with ultraviolet diode-array detector. A Plackett-Burman design was carried out in order to find the significant experimental parameters affecting the antioxidants extraction by microwave energy. These parameters were subsequently optimized by a central composite design. The performed method allows extracting the studied antioxidants at low temperature in a short time without degradation of phosphite antioxidant Irgafos 168.     

Enhancement of Phenol Degradation by Electron Acceptors in Anodic Contact Glow Discharge Electrolysis

Effects of several electron acceptors (Fe³⁺, Cu²⁺, Cr(VI), and H₂O₂) on phenol degradation in anodic contact glow discharge electrolysis have been investigated. Results show that the electron acceptors have positive effects on phenol removal, with the sequence of Fe³⁺?>?Cr(VI)?>?H₂O₂?>?Cu²⁺. Under conditions of voltage 500?V and current 100?mA, 100?mg/L phenol can be removed with 10?min of discharge treatment in the presence of 1.0?mmol/L Fe³⁺, while without any additive only 35?% of phenol is removed in 30?min. The mechanism of the degradation enhancement was discussed based on the reactions taking place in the presence of the different additives.     

Degradation of organic pollutants by visible light synergistic electro-Fenton oxidation process

Visible light irradiation combined with homogeneous iron and/or hydrogen peroxide to degrade organic dye rhodamine B (RhB) and small molecular compound 2,4-dichlorophenol (2,4-DCP) in a home-made bottle reactor was assessed. The concen-tration of oxidize species, Fe3+ and Fe2+ were determined during the degradation process. The results demonstrated that visible light irradiation combined with electro-Fenton improved the degradation efficiency. Moreover, both RhB and 2,4-DCP were mineralized during visible light synergistic electro-Fenton oxidation process. 95.0% TOC (total organic carbon) removal rate of RhB occurred after 90 min and 96.7% of COD (chemical oxygen demand) removal rate after 65 min of irradiation. 91.3% TOC removal rate of 2,4-DCP occurred after 16 h of irradiation and 99.9% COD removal rate occurred after 12 h of illumination. The degradation and oxidation process was dominated by the hydroxyl radical ( · OH) generated in the system. Both the impressed electricity and dye sensitization by visible light facilitated the conversion between Fe3+ and Fe 2+ , thus, improving Fenton reaction efficiency.     

Radiolytic degradation of 2,4-dichlorophenoxyacetic acid in dilute aqueous solution: pH dependence

The reactions of hydroxyl radical and hydrated electron intermediates of water radiolysis were studied in the radiolytic degradation of 2,4-dichlorophenoxyacetic acid (2,4-D) at pH values of 4, 6 and 8. The hydrated electron reactions are also suggested to contribute to the aromatic ring decomposition in addition to the highly effective hydroxyl radical reactions. The experimental results suggest also some contribution from the O₂^−•/HO₂^• pair to the degradation. The degradation efficiency was found to be the highest at pH 8 and the lowest at pH 6.     

Sensitive Phenol Detection Using Tyrosinase‐Based Phenol Oxidation Combined with Redox Cycling of Catechol

This paper reports sensitive phenol detection using (i) tyrosinase (Tyr)‐based oxidation of phenol to catechol, combined with (ii) electrochemical‐chemical‐chemical (ECC) redox cycling involving Ru(NH₃)₆³⁺, catechol, and tris(2‐carboxyethyl)phosphine (TCEP). Phenol is converted into catechol by Tyr in the presence of dissolved O₂. Catechol then reacts with Ru(NH₃)₆³⁺, generating o‐benzoquinone and Ru(NH₃)₆²⁺. o‐Benzoquinone is reduced back to catechol by TCEP, and Ru(NH₃)₆²⁺ is accumulated over the course of the incubation. When Ru(NH₃)₆²⁺ is electrochemically oxidized to Ru(NH₃)₆³⁺, ECC redox cycling occurs. For simple phenol detection, bare ITO electrodes are used without modifying the electrodes with Tyr. The detection limit for phenol in tap water using Tyr‐based oxidation combined with ECC redox cycling is ca. 10^?9 M, while that using only Tyr‐based oxidation is ca. 10^?7 M.     

Hybrid peroxi-coagulation/ozonation process for highly efficient removal of organic contaminants

Aromatic compounds such as phenols presented widely in coal chemical industry wastewater(CCW) render the treatment facing great challenge due to their biorefractory characteristics and potential risks to the environment and human health. Ozone-based advanced oxidation processes show promising for these pollutants removal, but the mineralization via ozonation alone is unsatisfactory and not cost-effective.Herein, a hybrid peroxi-coagulation/ozonation process(denoted as PCO) was developed using sa...     

Phosphite‐driven, [Cp*Rh(bpy)(H2O)]2+‐catalyzed reduction of nicotinamide and flavin cofactors: characterization and application to promote chemoenzymatic reduction reactions

The organometallic compound [Cp*Rh(bpy)(H₂O)]²⁺ is a versatile catalyst for the in situ regeneration of reduced nicotinamides and flavins by catalyzing the electron transfer between the cathode or formate to the oxidized cofactors and prosthetic groups. In the present contribution we demonstrate the feasibility of phosphite as an alternative source of reducing equivalents. Thus, [Cp*Rh(bpy)(H₂O)]²⁺ combines the catalytic activities of hydrogenases, formate and phosphite dehydrogenases in one catalyst. The catalytic properties of this novel regeneration approach are investigated, demonstrating that the general catalytic properties of [Cp*Rh(bpy)(H₂O)]²⁺ are preserved. The principal applicability to promote alcoholdehydrogenase‐catalyzed reduction reactions is demonstrated. Copyright © 2010 John Wiley & Sons, Ltd.     

High-temperature FeS-FeS2 solid-state transitions: Reactions of solid mackinawite with gaseous H2S

Phase transitions and reactions of non-oxidized and surface-oxidized mackinawite (FeS) in helium and H₂S gas were investigated by means of X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT). DFT was used to obtain optimized structures of the iron-sulfur phases mackinawite, hexagonal pyrrhotite, greigite, marcasite and pyrite and to determine the thermochemical properties of reactions of mackinawite with H₂S to these phases. The phase transitions of mackinawite to hexagonal pyrrhotite are endothermic, while reactions to greigite, marcasite and pyrite are exothermic. The experiments show that non-oxidized mackinawite converts into hexagonal pyrrhotite (Fe₉S₁₀ first and then Fe₇S₈) in He and also in H₂S but at a lower temperature. No further reactions can be observed under these conditions. In the case of surface-oxidized mackinawite, the extent of surface oxidation determines the course and the final product of the reaction with H₂S. If the extent of surface oxidation is low, only Fe²⁺ is oxidized to Fe³⁺. Under these conditions mackinawite converts into the mixed-valence thiospinel compound greigite. In case of pronounced surface oxidation all surface Fe centers are oxidized to the Fe³⁺ state and S²⁻ is oxidized to SO₄²⁻. Oxidation of sulfur is a prerequisite for the formation of pyrite.     

Fluorinated 1,3-diketones, 2-trifluoroacetyl phenols and their derivatives: versatile reactants in phosphorus chemistry

The role of fluorinated β-diketones, their tautomers (keto–enols) and their derivatives as reagents towards λ³P compounds is reviewed, including 2-trifluoroacetyl phenols, possessing formally a keto–enol system, and their derivatives. In an ‘insertion’ reaction phosphine and the keto–enol tautomers of 1,1,1,5,5,5-hexafluoro- and 1,1,1-trifluoropentan-2,4-dione furnished primary (S) or (R) α-hydroxy phosphines, whose enol functions probably isomerized the corresponding keto compounds. Further addition and isomerisation furnished 1,3α,5,7β-tetrakis(trifluoromethyl)-2-phospha-6-oxa-9-oxabicyclo[3.3.1]-nonan-3β,7α-diol and 1,7-trifluoromethyl-3,5-methyl-2,4,8-trioxa-6-phophaadamantane, exclusively one diastereomer in each case. The main mechanistic feature of these reactions is a consecutive diastereoselective hemiketal cyclization. 1,1,1,5,5,5-Hexafluoro- and 1,1,1-trifluoropentan-2,4-dione, as well as 2-trifluoroacetyl phenol and its imino derivatives reacted diastereospecifically with phosphonous acid dichlorides, RPCl₂ to give in a concerted mechanism thermally stable tricyclic λ⁵σ⁵P phosphoranes containing two five-membered rings and one six-membered ring. Surprisingly, the two CF₃ groups bonded to an sp³-hybridized carbon were in a cisoid arrangement having closest non-bonding FF distances of 301.4 or 273.5 pm. These findings reflect the ‘through space’ F---F coupling constants of the tricyclic phosphoranes (J_FF=4.0–7.0 Hz), in solution. 4,4,4-Trifluoro-3-hydroxy-1-phenyl-butan-1-one and methyl or phenyl phosphonous acid dichlorides gave similar tricyclic phosphoranes decomposing at ambient temperature to furnish 1,2λ⁵σ⁴-oxaphospholanes and (E)-1,1,1-trifluoro-4-phenyl-but-2-en-4-one. Dialkylphosphites and 1,1,1,5,5,5-hexafluoropentan-2,4-dione reacted to give either the (Z)-enol phosphonates or the respective γ-ketophosphonates from which in two cases four diastereomeric 2-oxo-2,5-dialkoxy-3,5-bis(trifluoromethyl)-3-hydroxy-1,2λ⁵σ⁴-oxa-phospholanes were obtained. 2-Trifluoroacetyl cyclohexanone, 4,4,4-trifluoro-3-trimethylsiloxy-1-phenylbutan-1-one, 1-benzoyl-2-trifluormethyloxirane, 1-benzoyl-2-trifluoro-methylaziridine, 2-trifluoroacetyl-1-trimethylsiloxybenzene and (trifluoroacetyl-1-phenyl) diethyl phosphate reacted with tris(trimethylsilyl) phosphite to give functionalized α-trimethylsiloxy phosphonates, which could easily be transferred into the respective phosphonic acids. In the case of an oxirane and an aziridine ketone no ring cleavage was observed. For 1,1′-(2-hydroxy-5-methyl-m-phenylene)-bis-ethanone and 1,1′-(2-trimethylsiloxy-5-methyl-m-phenylene)-bis-ethanone benzoxaphospholanes were obtained. Trialkyl phosphites and 1,1,1,5,5,5-hexafluoropentan-2,4-dione furnished cyclic phosphoranes containing the 3-hydroxy-3,5-bis(trifluoromethyl)-1,2λ⁵σ⁵-oxaphospholene structural element, stable at ambient temperature only in the case of one cyclic phosphite precursor. (E)-1,1,1-Trifluoro-4-phenyl-but-2-en-4-one and trimethylphosphite reacted to form 1,2λ⁵σ⁵-oxaphosphol-4-ene as the sole product. Results similar to the reaction of 1,1′-(2-hydroxy-5-methyl-m-phenylene)-bis-ethanone with diethyltrimethylsilylphosphite were obtained for trimethylphosphite and 2-trifluoroacetyl phenol where a deoxygenated phosphorane was found, easily hydrolyzed to give the respective phosphonic acid. With dialkylisocyanato phosphites and the keto components, 1,1,1,5,5,5-hexafluoro- and 1,1,1-trifluoropentan-2,4-dione, 4,4,4-trifluoro-1-phenyl-1,3-butandione, 2-trifluoroacetyl cyclohexanone, 2-trifluoroacetyl phenol and 1,1′-(2-hydroxy-5-methyl-m-phenylene)-bis-ethanone reacted in a ‘double’ cycloaddition to form bicyclic phosphoranes containing the 4,8-dioxa-2-aza-1λ⁵σ⁵-phosphabicyclo[3.3.0]-oct-6-en-3-one ring system; for the imino derivatives of 2-trifluoroacetyl phenol a corresponding 8-oxa-2,4-diaza- system was generated. For (E)-1,1,1,5,5,5-hexafluoro-4-trimethylsiloxy-3-penten-2-one however, a cyclic spiroimino phosphorane was obtained which underwent a [2+2] cyclodimerization to form a diazadiphosphetidine. Dimethylpropynyl phosphonite and 1,1,1,5,5,5-hexafluoropentan-2,4-dione yielded diastereoselectively a bisphosphorane, namely 1,4-bis(trifluoromethyl)-3,6-dioxa-2,2,7,7-tetramethoxy-2,7-di(1-propynyl)-2,7-diphosphabicyclo[2.2.1] heptane. When trimethylsilanyl–phosphenimidous acid bis-trimethylsilanyl–amide, Me₃SiN=PN(SiMe₃)₂, was allowed to react with 1,1,1,5,5,5-hexafluoro- and 1,1,1-trifluoropentan-2,4-dione, (E)-1,1,1,5,5,5-hexafluoro-4-trimethylsiloxy-3-penten-2-one, 2-trifluoroacetyl cyclopentanone, 2-trifluoroacetyl phenol and its imino derivatives, 2-imino-1,2λ⁵σ⁴-oxaphospholenes were found containing two diastereomers in each case, which added hexafluoroacetone across the P=N bond to give 1,3,2λ⁵σ⁵-oxazaphosphetanes.     

Synthesis and characterization of the substituted products from the reaction of a bulky phosphite with [Os3(CO)12]

Reaction of (acetonitrile)-undeca(carbonyl)-tri-osmium and tris(2,4-di-tert-butylphenyl) phosphite yielded the phosphite clusters [Os₃(CO)₁₁L] (4) and [Os₃(CO)₁₀L₂] (5) [L = P(O-2,4- ^t Bu₂C₆H₃)₃]. These compounds were characterized spectroscopically and the molecular structure of 5 was determined by single crystal X-ray diffraction, the first reported structural analysis of a tri-osmium cluster containing aromatic phosphite ligands. Compound 5 crystallized in the triclinic space group P 1, and revealed an equatorial trans–trans position of the bulky phosphite ligands.     

Photocatalysis of Au25-modified TiO2 under visible and near infrared light

Visible light-driven photocatalysis of Au₂₅-modified TiO₂ was investigated. It induces oxidation of phenol derivates and ferrocyanide and reduction of Ag⁺, Cu²⁺ and dissolved oxygen. Thermodynamically uphill reactions such as oxidation of phenol accompanied by reduction of Cu²⁺ are also driven. The photocatalysis, which is based on the excitation of Au₂₅, is observed even under 860 nm light.     

Degradation of Benzotriazole UV Stabilizers in PAA/d-Electron Metal Ions Systems—Removal Kinetics,Products and Mechanism Evaluation

Benzotriazole UV stabilizers (BUVs) have gained popularity, due to their absorption properties in the near UV range (200–400 nm). They are used in the technology for manufacturing plastics, protective coatings, and cosmetics, to protect against the destructive influence of UV radiation. These compounds are highly resistant to biological and chemical degradation. As a result of insufficient treatment by sewage treatment plants, they accumulate in the environment and in the tissues of living organisms. BUVs have adverse effects on living organisms. This work presents the use of peracetic acid in combination with d-electron metal ions (Fe²⁺, Co²⁺), for the chemical oxidation of five UV filters from the benzotriazole group: 2-(2-hydroxy-5-methylphenyl)benzotriazole (UV-P), 2-tert-butyl-6-(5-chloro-2H-benzotriazol-2-yl)-4-methylphenol (UV-326), 2,4-di-tert-butyl-6-(5-chloro-2H-benzotriazol-2-yl)phenol (UV-327), 2-(2H-benzotriazol-2-yl)-4,6-di-tert-pentylphenol (UV-328), and 2-(2H-benzotriazol-2-yl)-4-(1,1,3,3-tetramethylbutyl)phenol (UV-329). The oxidation procedure has been optimized based on the design of experiments (DoE) methodology. The oxidation of benzotriazoles follows first order kinetics. The oxidation products of each benzotriazole were investigated, and the oxidation mechanisms of the tested compounds were proposed.     

Reactions of Rh(acac)[P(OPh)3]2 with H2, CO and olefins

The reactions of Rh(acac)[P(OPh)₃]₂ with H₂, CO and olefins have been investigated using UV-VIS, IR, ¹H and ³¹P NMR techniques. In the presence of H₂ and free phosphite, Rh(acac)P₂ produces HRhP₄, which was shown to catalyse isomerization reactions of olefins. Addition of CO to HRhP₄ produces HRh(CO)P₃, which is a good hydroformylation catalyst. The latter hydride can also be obtained directly from the starting complex in the presence of H₂, CO and free phosphite. No evidence for the formation of any hydride complexes could be found in the absence of free phosphite. The results are discussed with reference to earlier studies performed on these systems.     

2,4-二氯苯酚的电化学氧化降解反应研究

采用循环伏安法和原位红外光谱技术研究了2,4-二氯苯酚在Pt电极上的电化学氧化降解反应,结合Fukui函数值预测了2,4-二氯苯酚在电化学氧化过程中的反应位点. 结果表明,Pt电极对2,4-二氯苯酚有良好的电催化活性,2,4-二氯苯酚在电极表面反应主要有3个途径：直接通过电化学反应脱去氯离子,生成苯酚;在·OH的进攻下,C—Cl键断裂,4位Cl较2位Cl先脱去,生成苯二酚,并可进一步氧化生成苯醌以及不饱和羧酸;在·OH的进攻下发生苯环开环反应,生成含氯不饱和羧酸. 在1700 mV左右,2,4-二氯苯酚可经电化学氧化生成CO₂.     

Inhibition of Polyethylene and Polypropylene Oxidation by Nitro Compounds Reacting with Alkyl and Peroxy Radicals

The kinetics of chain termination in polypropylene and polyethylene oxidation inhibited by 2,4-dinitrololuene is studied. 2,4-Dinitrololuene inhibits the oxidation of polyethylene and polypropylene lacking hydroperoxide groups by terminating chains in the reaction with alkyl macroradicals. In oxidized polypropylene containing hydroperoxide groups, chain termination on 2,4-dinitrololuene involves both alkyl and peroxy radicals. A cyclic mechanism is proposed for chain termination in partially oxidized polypropylene involving HO₂ ^·and nitroxyl radicals formed from 2,4-dinitrololuene.     

Effect of different dimethylphenols on the interactions with Ni2+-exchanged montmorillonite

The influence of different steric and electronic properties of 2,4-; 2,5-; and 3,5- dimethylphenols (2,4-; 2,5-; and 3,5- DMP, respectively) on Ni²⁺-montmorillonite (Ni²⁺-MMT) (I) were studied. The results of X-ray diffraction show that the observed changes of the basal spacing were due to the intercalation of phenol derivatives into the interlayer space of montmorillonite. The existence of one peak at ~1,633 cm^?1 in the IR spectra of sample Ni²⁺-MMT + 2,4-DMP (II) and Ni²⁺-MMT + 2,5-DMP (III) and shift of this peaks to higher frequency indicate that 2,4-DMP and 2,5-DMP exist in the interlayer space of Ni²⁺-MMT in the protonated form. The two bands at ~1,622 and 1,597 cm^?1 in the sample Ni²⁺-MMT + 3,5-DMP (IV) indicate that 3,5-DMP may be also directly coordinated to Ni²⁺ cations. The different interactions of phenol derivatives in the silicate interlayers will be connected with different position of methyl groups on the phenol ring.     

Metal complexes with ligands—organic phosphites as polyolefin antioxidants. III. Kinetics and mechanism of the inhibiting action of individual stable Cu(i)-complexes with phosphites

The general features of behavior of kinetically labile complexes (metal phosphite) revealed earlier ^1,2 provide the basis for the prediction of the activity of a new class of oxidation inhibitors. These are individual, stable metal complexes with organic phosphites as main ligands. The remarkable feature of these complexes, as shown as in this article on Cu(I) complexes, is the significant increase in the stoichiometric coefficient of inhibition f due to the suppression of the additional chain consumption of phosphite in the complex. The study of the initiated oxidation of styrene and solid isotactic polypropylene has proved that the phosphite complexes with Cu(I) ion are more effective than free, noncoordinated phosphites; quantitative characteristics of the inhibiting action of these complexes have been calculated. It is proved that termination of oxidation kinetic chains on the inhibitor molecules includes oxidation of coordinated phosphite without changing the oxidation degree of the central ion of metal. During inhibition of the oxidation of the substrate with mixtures of phosphite complexes of Cu(I) and phosphites (in styrene) or with aromatic amines (in polypropylene), the phenomenon of nonadditive strengthening (synergism) was discovered and the mechanism and kinetic regularities of synergism were revealed. This investigation of the phosphite complexes of the ions of Cu(I) presents new opportunities for controlled stabilization of polymers in uncontrolled conditions.     

Low-temperature dielectric spectrum of thermally oxidized polyethylene

Three loss peaks in the dielectric spectra of thermally oxidized polyethylene at temperatures below 50°K are each apparently associated with specific species of nonvolatile oxidation products involving hydrogen atoms. We report how each is influenced by room-temperature rolling, heat treatment, isotopic substitution, and chemical attack. One, the Vincett-Phillips peak, is susceptible to attack by Cu²⁺, Fe³⁺, and HI, and is attributed to a hydroperoxide species. Its rapid and easy determination has promise in the study of polyethylene oxidation. Carson's (higher-frequency) peak is tentatively attributed to an alcohol species and a new (lower-frequency higher-temperature) peak is described but not yet attributed. A few additional observations are made on the loss peaks associated with antioxidants of the substituted phenol type, as reported by Thomas and King.